From 6e7f61c9ab71c6ccb02d8a6d0ae0d052451efdd7 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:49:04 +0100 Subject: [PATCH 01/78] Update madvr.markdown --- source/_integrations/madvr.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/madvr.markdown b/source/_integrations/madvr.markdown index f3efe2626850..6c46c2d39905 100644 --- a/source/_integrations/madvr.markdown +++ b/source/_integrations/madvr.markdown @@ -19,7 +19,7 @@ ha_platforms: ha_integration_type: device --- -The madVR Envy allows for the automation and control of [madVR Envy devices](https://madvrenvy.com). +The **madVR Envy** {% term integration %} allows for the automation and control of [madVR Envy devices](https://madvrenvy.com). ## Supported Devices From c76672545124585c954f385ae9c5316107a8ff98 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:49:19 +0100 Subject: [PATCH 02/78] Update flux_led.markdown --- source/_integrations/flux_led.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/flux_led.markdown b/source/_integrations/flux_led.markdown index c8a5a8f14880..c1db5cb74118 100644 --- a/source/_integrations/flux_led.markdown +++ b/source/_integrations/flux_led.markdown @@ -26,7 +26,7 @@ ha_dhcp: true ha_integration_type: integration --- -The Magic Home {% term integration %} supports several brands of switches, bulbs, and controllers that use the same protocol. Chances are high that your bulb or controller (eg. WiFi LED CONTROLLER) will work with this integration if you can control the device with the Magic Home app or the Surp Life app. +The **Magic Home** {% term integration %} supports several brands of switches, bulbs, and controllers that use the same protocol. Chances are high that your bulb or controller (eg. WiFi LED CONTROLLER) will work with this integration if you can control the device with the Magic Home app or the Surp Life app. This integration will provide local control over your LED lights/strips and can be configured to auto-scan your network for controllers or for you to manually configure individual lights by their IP address. From 9b436f577030ce957877e1b4a78bd023a5590dc5 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:49:49 +0100 Subject: [PATCH 03/78] Update manual.markdown --- source/_integrations/manual.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/manual.markdown b/source/_integrations/manual.markdown index e8f98d91aee7..eda1e6661787 100644 --- a/source/_integrations/manual.markdown +++ b/source/_integrations/manual.markdown @@ -16,7 +16,7 @@ related: title: Configuration file --- -The `manual` alarm control panel {% term integration %} enables you to create an alarm system in Home Assistant. +The **Manual Alarm control panel** {% term integration %} enables you to create an alarm system in Home Assistant. ## Configuration From 8a8142961df78402c44879188f21632cebbb1419 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:50:08 +0100 Subject: [PATCH 04/78] Update manual_mqtt.markdown --- source/_integrations/manual_mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/manual_mqtt.markdown b/source/_integrations/manual_mqtt.markdown index 1c9e884aeca6..d05e4e359eb3 100644 --- a/source/_integrations/manual_mqtt.markdown +++ b/source/_integrations/manual_mqtt.markdown @@ -15,7 +15,7 @@ related: ha_quality_scale: legacy --- -The `mqtt` {% term integration %} extends the [manual alarm](/integrations/manual) by adding support for MQTT control of the alarm by a remote device. It can be used to create external keypads which simply change the state of the manual alarm in Home Assistant. +The **MQTT** {% term integration %} extends the [manual alarm](/integrations/manual) by adding support for MQTT control of the alarm by a remote device. It can be used to create external keypads which simply change the state of the manual alarm in Home Assistant. It's essentially the opposite of the [MQTT Alarm Panel](/integrations/alarm_control_panel.mqtt/) which allows Home Assistant to observe an existing, fully-featured alarm where all of the alarm logic is embedded in that physical device. From 89098ed2651ec0819073bcb5dff22bf233637549 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:50:36 +0100 Subject: [PATCH 05/78] Update marytts.markdown --- source/_integrations/marytts.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/marytts.markdown b/source/_integrations/marytts.markdown index e475bc99cb66..12b3778e7eed 100644 --- a/source/_integrations/marytts.markdown +++ b/source/_integrations/marytts.markdown @@ -15,7 +15,7 @@ related: ha_quality_scale: legacy --- -The `marytts` text-to-speech {% term integration %} uses [MaryTTS](https://marytts.github.io/) text-to-speech engine to read a text with natural sounding voices. +The **MaryTTS** {% term integration %} uses [MaryTTS](https://marytts.github.io/) text-to-speech engine to read a text with natural sounding voices. ## Configuration From 9c3a3b2071843f3db14e621aea4ec7e5d77cd594 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:50:53 +0100 Subject: [PATCH 06/78] Update mastodon.markdown --- source/_integrations/mastodon.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mastodon.markdown b/source/_integrations/mastodon.markdown index 2b1a2240a99c..985570e5c165 100644 --- a/source/_integrations/mastodon.markdown +++ b/source/_integrations/mastodon.markdown @@ -19,7 +19,7 @@ ha_config_flow: true ha_quality_scale: bronze --- -The `mastodon` platform uses [Mastodon](https://joinmastodon.org/) to post status updates and get account statistics. +The **Mastodon** {% term integration %} uses [Mastodon](https://joinmastodon.org/) to post status updates and get account statistics. ### Setup From 91ffcc1440ce8f557d65dbb9189e6b2d251c34fc Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:51:17 +0100 Subject: [PATCH 07/78] Update matter.markdown --- source/_integrations/matter.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/matter.markdown b/source/_integrations/matter.markdown index 65203e67f56d..e9a1d18b8a65 100644 --- a/source/_integrations/matter.markdown +++ b/source/_integrations/matter.markdown @@ -55,7 +55,7 @@ related: ha_zeroconf: true --- -The Matter {% term integration %} allows you to control Matter devices on your local Wi-Fi or {% term Thread %} network. +The **Matter** {% term integration %} allows you to control Matter devices on your local Wi-Fi or {% term Thread %} network. For communicating with Matter devices, the Home Assistant integration runs its own "Matter controller" as add-on. This Matter Server add-on runs the controller software as a separate process and connects your Matter network (called Fabric in technical terms) and Home Assistant. The Home Assistant Matter integration connects to this server via a WebSocket connection. From fa614e405f7aec2c8ca361d45e9ba1905e9f39b2 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:51:48 +0100 Subject: [PATCH 08/78] Update meater.markdown --- source/_integrations/meater.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/meater.markdown b/source/_integrations/meater.markdown index 834de4d1bbfb..df6149c580d6 100644 --- a/source/_integrations/meater.markdown +++ b/source/_integrations/meater.markdown @@ -16,7 +16,7 @@ ha_platforms: ha_integration_type: integration --- -The Meater Smart Meat Thermometer {% term integration %} allows for communicating with the [Meater Temperature Probe](https://meater.com/) from Apption Labs. +The **Meater** {% term integration %} allows for communicating with the [Meater Temperature Probe](https://meater.com/) from Apption Labs. {% include integrations/config_flow.md %} From 0e4468f6d7a7892d7ed2079945fd091830852c0f Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:52:07 +0100 Subject: [PATCH 09/78] Update media_extractor.markdown --- source/_integrations/media_extractor.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/media_extractor.markdown b/source/_integrations/media_extractor.markdown index 53ed8459bb04..76f4f12c622c 100644 --- a/source/_integrations/media_extractor.markdown +++ b/source/_integrations/media_extractor.markdown @@ -16,7 +16,7 @@ related: ha_config_flow: true --- -The Media extractor {% term integration %} gets a stream URL and sends it to a media player entity. This integration can extract entity specific streams if configured accordingly. +The **Media extractor** {% term integration %} gets a stream URL and sends it to a media player entity. This integration can extract entity specific streams if configured accordingly. {% note %} Media extractor doesn't transcode streams, it just tries to find a stream that matches the requested query. From a2aa19fc02ca82760fb0b981910fa6eef1c5ef87 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:52:20 +0100 Subject: [PATCH 10/78] Update media_source.markdown --- source/_integrations/media_source.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/media_source.markdown b/source/_integrations/media_source.markdown index aac6bee840ba..8484679dbb40 100644 --- a/source/_integrations/media_source.markdown +++ b/source/_integrations/media_source.markdown @@ -11,7 +11,7 @@ ha_quality_scale: internal ha_integration_type: system --- -The Media source {% term integration %} platform allows integrations to expose media for +The **Media source** {% term integration %} platform allows integrations to expose media for use inside Home Assistant through the Media Browser panel or through supported media players like Google Cast. From 049f25a36d6e689e093ea6729059cb47d041b1be Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:52:37 +0100 Subject: [PATCH 11/78] Update mediaroom.markdown --- source/_integrations/mediaroom.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mediaroom.markdown b/source/_integrations/mediaroom.markdown index f4028df6034d..03fd83dcfd49 100644 --- a/source/_integrations/mediaroom.markdown +++ b/source/_integrations/mediaroom.markdown @@ -17,7 +17,7 @@ related: ha_quality_scale: legacy --- -The `mediaroom` {% term integration %} allows you to control a [Mediaroom](https://en.wikipedia.org/wiki/Ericsson_Mediaroom) Set-Top Box (STB) from Home Assistant. +The **Mediaroom** {% term integration %} allows you to control a [Mediaroom](https://en.wikipedia.org/wiki/Ericsson_Mediaroom) Set-Top Box (STB) from Home Assistant. To add a Mediaroom STB to your installation, add the following to your {% term "`configuration.yaml`" %} file. {% include integrations/restart_ha_after_config_inclusion.md %} From a96231682c412852194fc18950b19877de45c5db Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:52:54 +0100 Subject: [PATCH 12/78] Update melcloud.markdown --- source/_integrations/melcloud.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/melcloud.markdown b/source/_integrations/melcloud.markdown index 952a7fd76059..e2e65051ff6c 100644 --- a/source/_integrations/melcloud.markdown +++ b/source/_integrations/melcloud.markdown @@ -17,7 +17,7 @@ ha_codeowners: - '@erwindouna' --- -The `melcloud` integration integrates Mitsubishi Electric's [MELCloud](https://www.melcloud.com/) enabled devices into Home Assistant. +The **MELCloud** {% term integration %} integrates Mitsubishi Electric's [MELCloud](https://www.melcloud.com/) enabled devices into Home Assistant. ## Device support From 7075f9a8363b38a8a4e6517ddf8cd4c7261d2ba0 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:53:09 +0100 Subject: [PATCH 13/78] Update melissa.markdown --- source/_integrations/melissa.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/melissa.markdown b/source/_integrations/melissa.markdown index ddd1bf43d45f..5ac7f9b1108c 100644 --- a/source/_integrations/melissa.markdown +++ b/source/_integrations/melissa.markdown @@ -18,7 +18,7 @@ related: ha_quality_scale: legacy --- -The `melissa` {% term integration %} is the main integration to connect to a [Melissa Climate](https://seemelissa.com/) A/C control. +The **Melissa** {% term integration %} is the main integration to connect to a [Melissa Climate](https://seemelissa.com/) A/C control. There is currently support for the following device types within Home Assistant: From 7c8ccdf6ce645a455bf485b868f201d96d698d13 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:53:24 +0100 Subject: [PATCH 14/78] Update melnor.markdown --- source/_integrations/melnor.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/melnor.markdown b/source/_integrations/melnor.markdown index 58503f1873a2..0ca183b463b9 100644 --- a/source/_integrations/melnor.markdown +++ b/source/_integrations/melnor.markdown @@ -19,7 +19,7 @@ ha_platforms: ha_integration_type: integration --- -The Melnor Bluetooth integration allows you to control your Melnor Bluetooth watering valves. +The **Melnor Bluetooth** {% term integration %} allows you to control your Melnor Bluetooth watering valves. The devices are set up through Bluetooth and don't need any additional bridge or gateway. 1-zone, 2-zone, and 4-zone valves are supported. From cbfc6c100b76b2f103cae1342ef9c14cc1833ea6 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:53:42 +0100 Subject: [PATCH 15/78] Update raincloud.markdown --- source/_integrations/raincloud.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/raincloud.markdown b/source/_integrations/raincloud.markdown index 792afecba5e3..f6ba12e732e5 100644 --- a/source/_integrations/raincloud.markdown +++ b/source/_integrations/raincloud.markdown @@ -22,7 +22,7 @@ related: ha_quality_scale: legacy --- -The `raincloud` {% term integration %} allows you to integrate your [Melnor RainCloud](https://wifiaquatimer.com) sprinkler system in Home Assistant. +The **Melnor RainCloud** {% term integration %} allows you to integrate your [Melnor RainCloud](https://wifiaquatimer.com) sprinkler system in Home Assistant. There is currently support for the following device types within Home Assistant: From 6859d13b4ee6ed0e95d7f890a01a30b54d9932db Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:54:07 +0100 Subject: [PATCH 16/78] Update message_bird.markdown --- source/_integrations/message_bird.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/message_bird.markdown b/source/_integrations/message_bird.markdown index 77a7fddbdaa6..2de5b64479ba 100644 --- a/source/_integrations/message_bird.markdown +++ b/source/_integrations/message_bird.markdown @@ -15,7 +15,7 @@ related: ha_quality_scale: legacy --- -The `MessageBird` notification {% term integration %} sends notifications as SMS messages using [MessageBird](https://www.messagebird.com/) to your mobile phone. +The **MessageBird** {% term integration %} sends notifications as SMS messages using [MessageBird](https://www.messagebird.com/) to your mobile phone. ## Setup From dc5e5f188301983e634ef6d4a95a77e01bfdd73d Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:54:24 +0100 Subject: [PATCH 17/78] Update met_eireann.markdown --- source/_integrations/met_eireann.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/met_eireann.markdown b/source/_integrations/met_eireann.markdown index be09a9f00f4a..ef1eac073b61 100644 --- a/source/_integrations/met_eireann.markdown +++ b/source/_integrations/met_eireann.markdown @@ -14,7 +14,7 @@ ha_platforms: ha_integration_type: integration --- -The Met Éireann {% term integration %} uses the [Met Éireann](https://met.ie) (The Irish Meteorological Service) Public Weather Forecast API to provide current and forecasted weather data for a given location. This integration is in no way affiliated with or endorsed by Met Éireann. +The **Met Éireann** {% term integration %} uses the [Met Éireann](https://met.ie) (The Irish Meteorological Service) Public Weather Forecast API to provide current and forecasted weather data for a given location. This integration is in no way affiliated with or endorsed by Met Éireann. {% note %} The Met Éireann API will only provide data for Ireland, the UK and a small part of northern France. For specific coverage, please see the Notes on API document available [here](https://data.gov.ie/dataset/met-eireann-forecast-api/resource/027da6d5-d819-48d1-9b16-331dba169bd1). From e147d90938ab51f845cab00395a1ac24bfac60fc Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:54:55 +0100 Subject: [PATCH 18/78] Update meteo_france.markdown --- source/_integrations/meteo_france.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/meteo_france.markdown b/source/_integrations/meteo_france.markdown index 2849cfdc55e8..d2324f288679 100644 --- a/source/_integrations/meteo_france.markdown +++ b/source/_integrations/meteo_france.markdown @@ -18,7 +18,7 @@ ha_platforms: ha_integration_type: integration --- -The `meteo_france` integration uses the meteorological data from [Météo-France](http://www.meteofrance.com/) to provide weather forecast for any location in the world with a focus on France. One or more locations can be set via the front end or via the configuration file. +The **Météo-France** {% term integration %} uses the meteorological data from [Météo-France](http://www.meteofrance.com/) to provide weather forecast for any location in the world with a focus on France. One or more locations can be set via the front end or via the configuration file. The integration support the following platforms within Home Assistant: From 4c803424d0346fc7266091e744195ce0afa67c3f Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:55:15 +0100 Subject: [PATCH 19/78] Update meteoalarm.markdown --- source/_integrations/meteoalarm.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/meteoalarm.markdown b/source/_integrations/meteoalarm.markdown index 44ac62f0acc0..3df30690b50f 100644 --- a/source/_integrations/meteoalarm.markdown +++ b/source/_integrations/meteoalarm.markdown @@ -14,7 +14,7 @@ ha_integration_type: integration ha_quality_scale: legacy --- -The `MeteoAlarm` platform allows one to watch for weather alerts in Europe from [MeteoAlarm](https://www.meteoalarm.org) (EUMETNET). To use this binary sensor, you need the country and the province name from [MeteoAlarm](https://feeds.meteoalarm.org). Please note that it is crucial to write the country name exactly as it appears in the URL starting with https://feeds.meteoalarm.org/feeds/meteoalarm-legacy-atom-, including any hyphens used in the name. Failure to do so may result in errors or incorrect data. +The **MeteoAlarm** {% term integration %} allows one to watch for weather alerts in Europe from [MeteoAlarm](https://www.meteoalarm.org) (EUMETNET). To use this binary sensor, you need the country and the province name from [MeteoAlarm](https://feeds.meteoalarm.org). Please note that it is crucial to write the country name exactly as it appears in the URL starting with https://feeds.meteoalarm.org/feeds/meteoalarm-legacy-atom-, including any hyphens used in the name. Failure to do so may result in errors or incorrect data. The name of the province can be found using the [MeteoAlarm EMMA_ID Region explorer tool](https://saratoga-weather.org/meteoalarm-map/) From 26025f1545515dcb1239e5e3fbc0725b7e120a1c Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:55:36 +0100 Subject: [PATCH 20/78] Update meteoclimatic.markdown --- source/_integrations/meteoclimatic.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/meteoclimatic.markdown b/source/_integrations/meteoclimatic.markdown index a4964a65a3cb..67b263d6f9f2 100644 --- a/source/_integrations/meteoclimatic.markdown +++ b/source/_integrations/meteoclimatic.markdown @@ -16,7 +16,7 @@ ha_platforms: ha_integration_type: integration --- -The Meteoclimatic {% term integration %} uses the [Meteoclimatic](https://www.meteoclimatic.net/) web service as a source for meteorological data for your location. The location is based on the Meteoclimatic station code (e.g., `ESCAT4300000043206B`) and the weather data reported is based on the capabilities of each station. +The **Meteoclimatic** {% term integration %} uses the [Meteoclimatic](https://www.meteoclimatic.net/) web service as a source for meteorological data for your location. The location is based on the Meteoclimatic station code (e.g., `ESCAT4300000043206B`) and the weather data reported is based on the capabilities of each station. There is currently support for the following platforms within Home Assistant: From b95c4a2e2001856d679d1b38914187d0cb3da4fd Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:55:53 +0100 Subject: [PATCH 21/78] Update met.markdown --- source/_integrations/met.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/met.markdown b/source/_integrations/met.markdown index d35c93a6f28a..82ccf40ad595 100644 --- a/source/_integrations/met.markdown +++ b/source/_integrations/met.markdown @@ -14,6 +14,6 @@ ha_platforms: ha_integration_type: integration --- -The `met` platform uses the [Met.no](https://met.no/) web service as a source for meteorological data for your location. The weather forecast is delivered by the Norwegian Meteorological Institute and the NRK. +The **Meteorologisk institutt (Met.no)** {% term integration %} uses the [Met.no](https://met.no/) web service as a source for meteorological data for your location. The weather forecast is delivered by the Norwegian Meteorological Institute and the NRK. {% include integrations/config_flow.md %} From dbc88ca3d83f88a62c9cc71dfd30183fcf424777 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:56:12 +0100 Subject: [PATCH 22/78] Update microbees.markdown --- source/_integrations/microbees.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/microbees.markdown b/source/_integrations/microbees.markdown index efb91c3d1b54..70a8c6df13e6 100644 --- a/source/_integrations/microbees.markdown +++ b/source/_integrations/microbees.markdown @@ -27,7 +27,7 @@ ha_platforms: ha_integration_type: integration --- -The microbees {% term integration %} allows you to control your [microBees devices](https://www.microbees.com/) such as plugs and wall switches. +The **microBees** {% term integration %} allows you to control your [microBees devices](https://www.microbees.com/) such as plugs and wall switches. To use this integration you need OAuth2 Client ID and Client Secret and your user credentials. To retrieve the OAuth2 Client ID and Client Secret go to [microBees Developer Dashboard](https://developers.microbees.com/dashboard), login with your microBees account and [create a new app](https://developers.microbees.com/dashboard/?p=wizard), choose a Label for your App, select WebApplication and input https://my.home-assistant.io as Website URL. From 0d59e990e8833752ecdd8120e77e2cb0f63570b8 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:56:33 +0100 Subject: [PATCH 23/78] Update microsoft_face.markdown --- source/_integrations/microsoft_face.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/microsoft_face.markdown b/source/_integrations/microsoft_face.markdown index 15342f3f23b4..ddc46c7a93fa 100644 --- a/source/_integrations/microsoft_face.markdown +++ b/source/_integrations/microsoft_face.markdown @@ -10,7 +10,7 @@ ha_integration_type: integration ha_quality_scale: legacy --- -The `microsoft_face` {% term integration %} is the main integration for Microsoft +The **Microsoft Face** {% term integration %} is the main integration for Microsoft Azure Cognitive service [Face](https://azure.microsoft.com/products/cognitive-services/vision-services). All data are stored in your own private instance in the Azure cloud. From 70dd4106dd25eff5787f5eb2f7b4d39cec3582cb Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:56:58 +0100 Subject: [PATCH 24/78] Update microsoft_face_detect.markdown --- source/_integrations/microsoft_face_detect.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/microsoft_face_detect.markdown b/source/_integrations/microsoft_face_detect.markdown index 0d01c6c428d0..616030a2a426 100644 --- a/source/_integrations/microsoft_face_detect.markdown +++ b/source/_integrations/microsoft_face_detect.markdown @@ -13,7 +13,7 @@ related: ha_quality_scale: legacy --- -The `microsoft_face_detect` image processing {% term integration %} allows you to use the +The **Microsoft Face Detect** {% term integration %} allows you to use the [Microsoft Face Identify](https://azure.microsoft.com/products/cognitive-services/) API through Home Assistant. This platform enables you to detect face on camera and fire an event with attributes. From 0df17134ab14f3e414488693a91a44b3ce06f418 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:57:21 +0100 Subject: [PATCH 25/78] Update microsoft_face_identify.markdown --- source/_integrations/microsoft_face_identify.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/microsoft_face_identify.markdown b/source/_integrations/microsoft_face_identify.markdown index 2df47729fb7d..e48580b956c8 100644 --- a/source/_integrations/microsoft_face_identify.markdown +++ b/source/_integrations/microsoft_face_identify.markdown @@ -13,7 +13,7 @@ related: ha_quality_scale: legacy --- -The `microsoft_face_identify` image processing {% term integration %} lets you use +The **Microsoft Face Identify** {% term integration %} lets you use [Microsoft Face identify](https://azure.microsoft.com/products/cognitive-services/) API through Home Assistant. This platform allow you do identify persons on camera and fire an event with attributes. From 97cd5f3701a35792d01cb4aa03e0dd7dc7fa4ad2 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:57:54 +0100 Subject: [PATCH 26/78] Update msteams.markdown --- source/_integrations/msteams.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/msteams.markdown b/source/_integrations/msteams.markdown index 32d788370996..42aa9b1dd1e4 100644 --- a/source/_integrations/msteams.markdown +++ b/source/_integrations/msteams.markdown @@ -14,7 +14,7 @@ ha_integration_type: integration ha_quality_scale: legacy --- -The `Microsoft Teams` platform allows you to send notifications from Home Assistant to a team channel in [Microsoft Teams](https://www.microsoft.com/microsoft-teams/group-chat-software). +The **Microsoft Teams** {% term integration %} allows you to send notifications from Home Assistant to a team channel in [Microsoft Teams](https://www.microsoft.com/microsoft-teams/group-chat-software). {% note %} From b092ce61285ed629076d5f57ab02452bb45760e3 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:58:18 +0100 Subject: [PATCH 27/78] Update microsoft.markdown --- source/_integrations/microsoft.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/microsoft.markdown b/source/_integrations/microsoft.markdown index ba31a7d0f4d2..e7027111b6f3 100644 --- a/source/_integrations/microsoft.markdown +++ b/source/_integrations/microsoft.markdown @@ -15,7 +15,7 @@ related: ha_quality_scale: legacy --- -The `microsoft` text-to-speech {% term integration %} uses the [TTS engine of the Microsoft Speech Service](https://learn.microsoft.com/azure/cognitive-services/speech-service/text-to-speech) to read a text with natural sounding voices. This integration uses an API that is part of the Cognitive Services offering and is known as the Microsoft Speech API. For this integration to work, you need a free API key. You can use your [Azure subscription](https://azure.microsoft.com) to create an [Azure Speech resource](https://portal.azure.com/#create/Microsoft.CognitiveServicesSpeechServices). +The **Microsoft Text-to-Speech** {% term integration %} uses the [TTS engine of the Microsoft Speech Service](https://learn.microsoft.com/azure/cognitive-services/speech-service/text-to-speech) to read a text with natural sounding voices. This integration uses an API that is part of the Cognitive Services offering and is known as the Microsoft Speech API. For this integration to work, you need a free API key. You can use your [Azure subscription](https://azure.microsoft.com) to create an [Azure Speech resource](https://portal.azure.com/#create/Microsoft.CognitiveServicesSpeechServices). ## Configuration From 91c8242e21bbcdc01aa2fea7a4df457201aa2f53 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:58:33 +0100 Subject: [PATCH 28/78] Update ccm15.markdown --- source/_integrations/ccm15.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/ccm15.markdown b/source/_integrations/ccm15.markdown index 62197b917787..fe13050e6c65 100644 --- a/source/_integrations/ccm15.markdown +++ b/source/_integrations/ccm15.markdown @@ -15,7 +15,7 @@ ha_platforms: ha_integration_type: integration --- -The CCM15 integration allows you to integrate [Midea CCM15](https://mbt.midea.com/hvac-goods/midea-products-category/vrfs/vrf-controller/central-controller-ccm-15) devices in Home Assistant. +The **CCM15** {% term integration %} allows you to integrate [Midea CCM15](https://mbt.midea.com/hvac-goods/midea-products-category/vrfs/vrf-controller/central-controller-ccm-15) devices in Home Assistant. There is currently support for the following device types within Home Assistant: From 8c1d29bc97914234286cc8193cc9d30e840d8a93 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:58:46 +0100 Subject: [PATCH 29/78] Update miele.markdown --- source/_integrations/miele.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/miele.markdown b/source/_integrations/miele.markdown index 6b9c10dec761..fbc6324ce0d2 100644 --- a/source/_integrations/miele.markdown +++ b/source/_integrations/miele.markdown @@ -34,7 +34,7 @@ ha_zeroconf: true ha_quality_scale: platinum --- -The Miele {% term integrations %} allows users to integrate their home appliances using the [official 3rd party API](https://www.miele.com/developer). +The **Miele** {% term integration %} allows users to integrate their home appliances using the [official 3rd party API](https://www.miele.com/developer). Miele is known as a manufacturer of premium appliances for cooking, laundry care, and floor care. From 55e9f12305112c4ab2291b1b2fdf7bfe1885491c Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:59:04 +0100 Subject: [PATCH 30/78] Update mikrotik.markdown --- source/_integrations/mikrotik.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mikrotik.markdown b/source/_integrations/mikrotik.markdown index fbdeeecdfecc..2651bc31b4d9 100644 --- a/source/_integrations/mikrotik.markdown +++ b/source/_integrations/mikrotik.markdown @@ -15,7 +15,7 @@ ha_platforms: ha_integration_type: integration --- -The `mikrotik` platform offers presence detection by looking at connected devices to a [MikroTik RouterOS](https://mikrotik.com) based router. +The **MikroTik** {% term integration %} offers presence detection by looking at connected devices to a [MikroTik RouterOS](https://mikrotik.com) based router. There is currently support for the following device types within Home Assistant: From d9cf282ce23edcb5c105df46223abce81621ceed Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:59:20 +0100 Subject: [PATCH 31/78] Update min_max.markdown --- source/_integrations/min_max.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/min_max.markdown b/source/_integrations/min_max.markdown index 4ffbb76e3379..35eaba9cbdee 100644 --- a/source/_integrations/min_max.markdown +++ b/source/_integrations/min_max.markdown @@ -17,7 +17,7 @@ ha_platforms: ha_integration_type: helper --- -The Min/Max {% term integration %} consumes the state from other sensors to determine the minimum, maximum, latest (last), mean, median, range and sum of the collected states. +The **Min/Max** {% term integration %} consumes the state from other sensors to determine the minimum, maximum, latest (last), mean, median, range and sum of the collected states. The sensor provided by this integration will always show you the lowest/highest/latest value which was received from all monitored sensors. If you have spikes in your values, it's recommended to filter/equalize your values with a [statistics sensor](/integrations/statistics) first. From cdc48c2572ce5f7f9c8acf47944e019034f383a1 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 19:59:53 +0100 Subject: [PATCH 32/78] Update mjpeg.markdown --- source/_integrations/mjpeg.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mjpeg.markdown b/source/_integrations/mjpeg.markdown index 72f4ec5447b6..d125f01ba61f 100644 --- a/source/_integrations/mjpeg.markdown +++ b/source/_integrations/mjpeg.markdown @@ -12,7 +12,7 @@ ha_platforms: ha_integration_type: integration --- -The MJPEG IP Camera integration allows you to integrate IP cameras which are +The **MJPEG IP Camera** {% term integration %} allows you to integrate IP cameras which are capable to stream their video with MJPEG (Motion JPEG) into Home Assistant. ## Prerequisites From fb5ffc584fb8f70709ca1df3ff789b4fda78d660 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:00:15 +0100 Subject: [PATCH 33/78] Update mobile_app.markdown --- source/_integrations/mobile_app.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mobile_app.markdown b/source/_integrations/mobile_app.markdown index 59f901c76908..bcf0da2e0a90 100644 --- a/source/_integrations/mobile_app.markdown +++ b/source/_integrations/mobile_app.markdown @@ -18,7 +18,7 @@ ha_platforms: ha_integration_type: integration --- -The Mobile App {% term integration %} allows Home Assistant mobile apps to easily integrate with Home Assistant. +The **Mobile App** {% term integration %} allows Home Assistant mobile apps to easily integrate with Home Assistant. If you are planning to use a mobile application that integrates with Home Assistant, we recommend that you keep this integration enabled. From 363b7d37e92ddda79e104539e312b7eb84c547af Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:00:40 +0100 Subject: [PATCH 34/78] Update mochad.markdown --- source/_integrations/mochad.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mochad.markdown b/source/_integrations/mochad.markdown index 44ec9d17b1e8..9beac5968f53 100644 --- a/source/_integrations/mochad.markdown +++ b/source/_integrations/mochad.markdown @@ -18,7 +18,7 @@ related: ha_quality_scale: legacy --- -The `mochad` {% term integration %} is the main integration to integrate all X10 platforms being controlled by [mochad](https://sourceforge.net/projects/mochad/). Besides this integration you will have to setup your X10 devices separately. +The **Mochad** {% term integration %} is the main integration to integrate all X10 platforms being controlled by [mochad](https://sourceforge.net/projects/mochad/). Besides this integration you will have to setup your X10 devices separately. There is currently support for the following device types within Home Assistant: From a5b4cd2db10be14855e65542d002d880402b5349 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:01:12 +0100 Subject: [PATCH 35/78] Update moehlenhoff_alpha2.markdown --- source/_integrations/moehlenhoff_alpha2.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/moehlenhoff_alpha2.markdown b/source/_integrations/moehlenhoff_alpha2.markdown index 47c78c97ef85..7ee0216aa7d2 100644 --- a/source/_integrations/moehlenhoff_alpha2.markdown +++ b/source/_integrations/moehlenhoff_alpha2.markdown @@ -17,7 +17,7 @@ ha_platforms: ha_integration_type: integration --- -The Möhlenhoff Alpha 2 integration allows you to control a [Möhlenhoff Alpha 2](https://dev.moehlenhoff.de/en/products/room-by-room-control/oem-alpha-2-system) +The **Möhlenhoff Alpha 2** {% term integration %} allows you to control a [Möhlenhoff Alpha 2](https://dev.moehlenhoff.de/en/products/room-by-room-control/oem-alpha-2-system) temperature control system. From c064cd606defc4d799fd97abc930d8cf65501159 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:01:30 +0100 Subject: [PATCH 36/78] Update mold_indicator.markdown --- source/_integrations/mold_indicator.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mold_indicator.markdown b/source/_integrations/mold_indicator.markdown index 093f224d2008..47d4fb4396c5 100644 --- a/source/_integrations/mold_indicator.markdown +++ b/source/_integrations/mold_indicator.markdown @@ -17,7 +17,7 @@ related: title: Configuration file --- -The Mold Indicator sensor {% term integration %} uses data from two temperature sensors and a humidity sensor to predict the humidity near a cold surface. High humidity may lead to mold growth at more than ~70% and causes condensation at 100%. +The **Mold Indicator** {% term integration %} uses data from two temperature sensors and a humidity sensor to predict the humidity near a cold surface. High humidity may lead to mold growth at more than ~70% and causes condensation at 100%. The sensor data may be used, for example, to detect bad air quality (high humidity) or automate the operation of indoor air humidifiers to keep the indoor humidity at an optimum. From 7d7792addec9ed796ba496ee4591444238377cb5 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:02:01 +0100 Subject: [PATCH 37/78] Update monoprice.markdown --- source/_integrations/monoprice.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/monoprice.markdown b/source/_integrations/monoprice.markdown index f9ca7ccade19..61ed7b013690 100644 --- a/source/_integrations/monoprice.markdown +++ b/source/_integrations/monoprice.markdown @@ -15,7 +15,7 @@ ha_platforms: ha_integration_type: integration --- -The `monoprice` platform allows you to control [Monoprice 6-Zone Amplifier](https://www.monoprice.com/product?p_id=10761) using a serial connection. +The **Monoprice 6-Zone Amplifier** {% term integration %} allows you to control [Monoprice 6-Zone Amplifier](https://www.monoprice.com/product?p_id=10761) using a serial connection. {% include integrations/config_flow.md %} From 66df33d8fe2d6096ad6fe48c47f06e0df4aa31c6 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:02:31 +0100 Subject: [PATCH 38/78] Update blackbird.markdown --- source/_integrations/blackbird.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/blackbird.markdown b/source/_integrations/blackbird.markdown index e107a6609e64..28c243ea3db9 100644 --- a/source/_integrations/blackbird.markdown +++ b/source/_integrations/blackbird.markdown @@ -15,7 +15,7 @@ related: ha_quality_scale: legacy --- -The `blackbird` platform allows you to control [Monoprice Blackbird Matrix Switch](https://www.monoprice.com/product?p_id=21819) (8x8) using a serial or IP connection, this integration does not support the 4x4 matrix switch. +The **Monoprice Blackbird Matrix Switch** {% term integration %} allows you to control [Monoprice Blackbird Matrix Switch](https://www.monoprice.com/product?p_id=21819) (8x8) using a serial or IP connection, this integration does not support the 4x4 matrix switch. To add a Blackbird 8x8 device to your installation, add the following to your {% term "`configuration.yaml`" %} file. {% include integrations/restart_ha_after_config_inclusion.md %} From 3d140fbc3fc3709d53b589b167583d0b2d74dcd5 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:02:53 +0100 Subject: [PATCH 39/78] Update moon.markdown --- source/_integrations/moon.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/moon.markdown b/source/_integrations/moon.markdown index 1fb2fd86d0ac..da3c5843569e 100644 --- a/source/_integrations/moon.markdown +++ b/source/_integrations/moon.markdown @@ -16,7 +16,7 @@ ha_config_flow: true ha_integration_type: service --- -The Moon integration tracks the phases of the moon. +The **Moon** {% term integration %} tracks the phases of the moon. {% include integrations/config_flow.md %} From 3ea41706cdd87050e86aff1f88c1155acc460b64 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:03:17 +0100 Subject: [PATCH 40/78] Update motion_blinds.markdown --- source/_integrations/motion_blinds.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/motion_blinds.markdown b/source/_integrations/motion_blinds.markdown index 6e5ca8394850..2eaf1acd505f 100644 --- a/source/_integrations/motion_blinds.markdown +++ b/source/_integrations/motion_blinds.markdown @@ -17,7 +17,7 @@ ha_dhcp: true ha_integration_type: integration --- -The integration allows you to control [Motionblinds](https://motionblinds.com/) from [Coulisse B.V.](https://coulisse.com/). +The **Motionblinds** {% term integration %} allows you to control [Motionblinds](https://motionblinds.com/) from [Coulisse B.V.](https://coulisse.com/). Additionally the following brands have been reported to also work with this integration: From e726bc40770147bb5d72e607db4b4334f704ec76 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:03:38 +0100 Subject: [PATCH 41/78] Update motioneye.markdown --- source/_integrations/motioneye.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/motioneye.markdown b/source/_integrations/motioneye.markdown index f686d0063776..3547fe80a05c 100644 --- a/source/_integrations/motioneye.markdown +++ b/source/_integrations/motioneye.markdown @@ -17,7 +17,7 @@ ha_platforms: ha_integration_type: integration --- -The motionEye integration allows you to integrate your +The **motionEye** {% term integration %} allows you to integrate your [motionEye](https://github.com/motioneye-project/motioneye) server into Home Assistant. motionEye is an open source web-frontend for the motion daemon, used to centralize the management and visualization of multiple types of cameras. From d7a39098be38cf9655e004f2efd1d50b0bf612b0 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:05:34 +0100 Subject: [PATCH 42/78] Update alarm_control_panel.mqtt.markdown --- source/_integrations/alarm_control_panel.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/alarm_control_panel.mqtt.markdown b/source/_integrations/alarm_control_panel.mqtt.markdown index 91b2b4fa4842..64cad9af0606 100644 --- a/source/_integrations/alarm_control_panel.mqtt.markdown +++ b/source/_integrations/alarm_control_panel.mqtt.markdown @@ -11,7 +11,7 @@ related: title: Configuration file --- -The `mqtt` alarm panel {% term integration %} enables the possibility to control MQTT capable alarm panels. The Alarm icon will change state after receiving a new state from `state_topic`. If these messages are published with *RETAIN* flag, the MQTT alarm panel will receive an instant state update after subscription and will start with the correct state. Otherwise, the initial state will be `unknown`. +The **MQTT Alarm control panel** {% term integration %} enables the possibility to control MQTT capable alarm panels. The Alarm icon will change state after receiving a new state from `state_topic`. If these messages are published with *RETAIN* flag, the MQTT alarm panel will receive an instant state update after subscription and will start with the correct state. Otherwise, the initial state will be `unknown`. The {% term integration %} will accept the following states from your Alarm Panel (in lower case): From 08017896caaf1b7412780bdf21a1a107e6f2f804 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:05:58 +0100 Subject: [PATCH 43/78] Update binary_sensor.mqtt.markdown --- source/_integrations/binary_sensor.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/binary_sensor.mqtt.markdown b/source/_integrations/binary_sensor.mqtt.markdown index d663d8f523b7..8f031dc3c48e 100644 --- a/source/_integrations/binary_sensor.mqtt.markdown +++ b/source/_integrations/binary_sensor.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` binary sensor platform uses an MQTT message received to set the binary sensor's state to `on`, `off` or `unknown`. +The **MQTT binary sensor** {% term integration %} uses an MQTT message received to set the binary sensor's state to `on`, `off` or `unknown`. The state will be updated only after a new message is published on `state_topic` matching `payload_on`, `payload_off` or `None`. If these messages are published with the `retain` flag set, the binary sensor will receive an instant state update after subscription and Home Assistant will display the correct state on startup. From 9f1f73aea64a046aae75a8ab44cbc8abd8ae496f Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:06:15 +0100 Subject: [PATCH 44/78] Update button.mqtt.markdown --- source/_integrations/button.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/button.mqtt.markdown b/source/_integrations/button.mqtt.markdown index ac2e5c03aa69..97daa233483b 100644 --- a/source/_integrations/button.mqtt.markdown +++ b/source/_integrations/button.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` button platform lets you send an MQTT message when the button is pressed in the frontend or the button press action is called. This can be used to expose some service of a remote device, for example reboot. +The **MQTT button** {% term integration %} lets you send an MQTT message when the button is pressed in the frontend or the button press action is called. This can be used to expose some service of a remote device, for example reboot. To use an MQTT button in your installation, [add a MQTT device as a subentry](/integrations/mqtt/#configuration), or add the following to your {% term "`configuration.yaml`" %} file. {% include integrations/restart_ha_after_config_inclusion.md %} From ad34b13514a5c64a220dc6dd5bc9f8f6c25eb07e Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:06:35 +0100 Subject: [PATCH 45/78] Update camera.mqtt.markdown --- source/_integrations/camera.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/camera.mqtt.markdown b/source/_integrations/camera.mqtt.markdown index d37693ca28b7..bcdd5a5afe18 100644 --- a/source/_integrations/camera.mqtt.markdown +++ b/source/_integrations/camera.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` camera platform allows you to integrate the content of an image file sent through MQTT into Home Assistant as a camera. Every time a message under the `topic` in the configuration is received, the image displayed in Home Assistant will also be updated. Messages received on `topic` should contain the full contents of an image file, for example, a JPEG image, without any additional encoding or metadata. +The **MQTT camera** {% term integration %} allows you to integrate the content of an image file sent through MQTT into Home Assistant as a camera. Every time a message under the `topic` in the configuration is received, the image displayed in Home Assistant will also be updated. Messages received on `topic` should contain the full contents of an image file, for example, a JPEG image, without any additional encoding or metadata. This can be used with an application or a service capable of sending images through MQTT. From 686a266ef0966131c711d63d3c55bb960707cf8e Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:06:55 +0100 Subject: [PATCH 46/78] Update climate.mqtt.markdown --- source/_integrations/climate.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/climate.mqtt.markdown b/source/_integrations/climate.mqtt.markdown index cbbcbaecdeb6..f73499242726 100644 --- a/source/_integrations/climate.mqtt.markdown +++ b/source/_integrations/climate.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Local Polling ha_domain: mqtt --- -The `mqtt` climate platform lets you control your MQTT enabled HVAC devices. +The **MQTT climate** {% term integration %} lets you control your MQTT enabled HVAC devices. ## Configuration From 1dc22dd72626060378724bc39ec63fe82efafeeb Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:07:16 +0100 Subject: [PATCH 47/78] Update cover.mqtt.markdown --- source/_integrations/cover.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/cover.mqtt.markdown b/source/_integrations/cover.mqtt.markdown index 6a1fa0a5b74f..f50052d25ab0 100644 --- a/source/_integrations/cover.mqtt.markdown +++ b/source/_integrations/cover.mqtt.markdown @@ -8,7 +8,7 @@ ha_release: 0.18 ha_domain: mqtt --- -The `mqtt` cover platform allows you to control an MQTT cover (such as blinds, a roller shutter or a garage door). +The **MQTT cover** {% term integration %} allows you to control an MQTT cover (such as blinds, a roller shutter or a garage door). ## Configuration From 3a8582cce671d07e004d2b33d729ddaf96e08a0b Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:11:46 +0100 Subject: [PATCH 48/78] Update device_tracker.mqtt.markdown --- source/_integrations/device_tracker.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/device_tracker.mqtt.markdown b/source/_integrations/device_tracker.mqtt.markdown index b078c2e59b28..42df73bb17ce 100644 --- a/source/_integrations/device_tracker.mqtt.markdown +++ b/source/_integrations/device_tracker.mqtt.markdown @@ -12,7 +12,7 @@ related: --- -The `mqtt` device tracker {% term integration %} allows you to define new device_trackers through [manual YAML configuration](#yaml-configuration) in {% term "`configuration.yaml`" %} and also to automatically discover device_trackers [using the MQTT Discovery protocol](#using-the-discovery-protocol). +The **MQTT device tracker** {% term integration %} allows you to define new device_trackers through [manual YAML configuration](#yaml-configuration) in {% term "`configuration.yaml`" %} and also to automatically discover device_trackers [using the MQTT Discovery protocol](#using-the-discovery-protocol). ## Configuration From b472452bc1973f323ecfefc9a5aee60b7a9e22b8 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:12:09 +0100 Subject: [PATCH 49/78] Update device_trigger.mqtt.markdown --- source/_integrations/device_trigger.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/device_trigger.mqtt.markdown b/source/_integrations/device_trigger.mqtt.markdown index 174807d66fa3..f088655cd411 100644 --- a/source/_integrations/device_trigger.mqtt.markdown +++ b/source/_integrations/device_trigger.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` device trigger platform uses an MQTT message payload to generate device trigger events. +The **MQTT Device trigger** {% term integration %} uses an MQTT message payload to generate device trigger events. An MQTT device trigger is a better option than a [binary sensor](/integrations/binary_sensor.mqtt/) for buttons, remote controls etc. From ebc7d02eec205b8dadd7f25f7ea1039094757a18 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:12:32 +0100 Subject: [PATCH 50/78] Update event.mqtt.markdown --- source/_integrations/event.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/event.mqtt.markdown b/source/_integrations/event.mqtt.markdown index 8b50821aa99a..1af569f5d546 100644 --- a/source/_integrations/event.mqtt.markdown +++ b/source/_integrations/event.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` event platform allows you to process event info from an MQTT message. Events are signals that are emitted when something happens, for example, when a user presses a physical button like a doorbell or when a button on a remote control is pressed. With the event some event attributes can be sent to become available as an attribute on the entity. MQTT events are stateless. For example, a doorbell does not have a state like being "on" or "off" but instead is momentarily pressed. +The **MQTT Event** {% term integration %} allows you to process event info from an MQTT message. Events are signals that are emitted when something happens, for example, when a user presses a physical button like a doorbell or when a button on a remote control is pressed. With the event some event attributes can be sent to become available as an attribute on the entity. MQTT events are stateless. For example, a doorbell does not have a state like being "on" or "off" but instead is momentarily pressed. ## Configuration From 84a3bc961a7e1de3e8e13a359ea14b61231b6239 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:13:01 +0100 Subject: [PATCH 51/78] Update mqtt_eventstream.markdown --- source/_integrations/mqtt_eventstream.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mqtt_eventstream.markdown b/source/_integrations/mqtt_eventstream.markdown index 18bab0e7c135..4aade121be2d 100644 --- a/source/_integrations/mqtt_eventstream.markdown +++ b/source/_integrations/mqtt_eventstream.markdown @@ -13,7 +13,7 @@ related: ha_quality_scale: legacy --- -The `mqtt_eventstream` {% term integration %} connects two Home Assistant instances via MQTT. +The **MQTT Eventstream** {% term integration %} connects two Home Assistant instances via MQTT. ## Configuration From 6795dc5dd8efbc7411a602b8ac51a1a17c1cbca6 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:13:21 +0100 Subject: [PATCH 52/78] Update fan.mqtt.markdown --- source/_integrations/fan.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/fan.mqtt.markdown b/source/_integrations/fan.mqtt.markdown index c5e53238ec55..2c72f122da55 100644 --- a/source/_integrations/fan.mqtt.markdown +++ b/source/_integrations/fan.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` fan platform lets you control your MQTT enabled fans. +The **MQTT Fan** {% term integration %} lets you control your MQTT enabled fans. ## Configuration From f52e8343bc34abb658f8846bf02b427697050b1e Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:13:46 +0100 Subject: [PATCH 53/78] Update humidifier.mqtt.markdown --- source/_integrations/humidifier.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/humidifier.mqtt.markdown b/source/_integrations/humidifier.mqtt.markdown index 3bd4a5502b76..5e50b83889a1 100644 --- a/source/_integrations/humidifier.mqtt.markdown +++ b/source/_integrations/humidifier.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` humidifier platform lets you control your MQTT enabled humidifiers. +The **MQTT Humidifier** {% term integration %} lets you control your MQTT enabled humidifiers. ## Configuration From 938beec9f8a2b0a1c8aad916594e57fdf2f86a8c Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:14:05 +0100 Subject: [PATCH 54/78] Update image.mqtt.markdown --- source/_integrations/image.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/image.mqtt.markdown b/source/_integrations/image.mqtt.markdown index 5f85402109a2..054995976601 100644 --- a/source/_integrations/image.mqtt.markdown +++ b/source/_integrations/image.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` image platform allows you to integrate the content of an image file sent through MQTT into Home Assistant as an image. +The **MQTT Image** {% term integration %} allows you to integrate the content of an image file sent through MQTT into Home Assistant as an image. The `image` platform is a simplified version of the `camera` platform that only accepts images. Every time a message under the `image_topic` in the configuration is received, the image displayed in Home Assistant will also be updated. Messages received on `image_topic` should contain the full contents of an image file, for example, a JPEG image, without any additional encoding or metadata. From e6a348992d8872aa3a8b5b652b8799166fb994c0 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:14:32 +0100 Subject: [PATCH 55/78] Update mqtt_json.markdown --- source/_integrations/mqtt_json.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mqtt_json.markdown b/source/_integrations/mqtt_json.markdown index 8e211bae914b..49154f53eb86 100644 --- a/source/_integrations/mqtt_json.markdown +++ b/source/_integrations/mqtt_json.markdown @@ -15,7 +15,7 @@ related: ha_quality_scale: legacy --- -The `mqtt_json` device tracker {% term integration %} allows you to detect presence by monitoring an MQTT topic for new locations. To use this platform, you specify a unique topic for each device. +The **MQTT JSON** {% term integration %} allows you to detect presence by monitoring an MQTT topic for new locations. To use this platform, you specify a unique topic for each device. ## Configuration From 2eac082b161876bbe347596b18235a35a4af424f Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:15:00 +0100 Subject: [PATCH 56/78] Update lawn_mower.mqtt.markdown --- source/_integrations/lawn_mower.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/lawn_mower.mqtt.markdown b/source/_integrations/lawn_mower.mqtt.markdown index e1eaeb2103d3..d67fbc991620 100644 --- a/source/_integrations/lawn_mower.mqtt.markdown +++ b/source/_integrations/lawn_mower.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` `lawn_mower` platform allows controlling a lawn mower over MQTT. +The **MQTT lawn mower** {% term integration %} allows controlling a lawn mower over MQTT. ## Configuration From 9cf3290c3116c9565b4b031b37407103ea8c14d1 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:15:18 +0100 Subject: [PATCH 57/78] Update light.mqtt.markdown --- source/_integrations/light.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/light.mqtt.markdown b/source/_integrations/light.mqtt.markdown index eafb99a0f183..0cf04ec7128c 100644 --- a/source/_integrations/light.mqtt.markdown +++ b/source/_integrations/light.mqtt.markdown @@ -8,7 +8,7 @@ ha_release: 0.8 ha_domain: mqtt --- -The `mqtt` light platform lets you control your MQTT enabled lights through one of the supported message schemas, `default`, `json` or `template`. +The **MQTT Light** {% term integration %} lets you control your MQTT enabled lights through one of the supported message schemas, `default`, `json` or `template`. ## Comparison of light MQTT schemas From ff799ee3ec5510da36eb8df2427d68026a947f64 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:15:34 +0100 Subject: [PATCH 58/78] Update lock.mqtt.markdown --- source/_integrations/lock.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/lock.mqtt.markdown b/source/_integrations/lock.mqtt.markdown index be3a938212ed..debfceb806b6 100644 --- a/source/_integrations/lock.mqtt.markdown +++ b/source/_integrations/lock.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` lock platform lets you control your MQTT enabled locks. +The **MQTT Lock** {% term integration %} lets you control your MQTT enabled locks. ## Configuration From 46f99600da888bc58309c8907d3dff7a917f8538 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:15:46 +0100 Subject: [PATCH 59/78] Update notify.mqtt.markdown --- source/_integrations/notify.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/notify.mqtt.markdown b/source/_integrations/notify.mqtt.markdown index ca35109b95e7..aea6c966007e 100644 --- a/source/_integrations/notify.mqtt.markdown +++ b/source/_integrations/notify.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The **MQTT notify** platform lets you send an MQTT message when the `send_message` action is called. This can be used to expose a action of a remote device that allows processing a message, such as showing it on a screen. +The **MQTT notify** {% term integration %} lets you send an MQTT message when the `send_message` action is called. This can be used to expose a action of a remote device that allows processing a message, such as showing it on a screen. ## Configuration From 7fe37dca9a8f35ca9771c2324476c9aa3021ea2a Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:16:15 +0100 Subject: [PATCH 60/78] Update number.mqtt.markdown --- source/_integrations/number.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/number.mqtt.markdown b/source/_integrations/number.mqtt.markdown index 515ece525477..4008a3db5697 100644 --- a/source/_integrations/number.mqtt.markdown +++ b/source/_integrations/number.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` Number platform allows you to integrate devices that might expose configuration options through MQTT into Home Assistant as a Number. Every time a message under the `topic` in the configuration is received, the number entity will be updated in Home Assistant and vice-versa, keeping the device and Home Assistant in-sync. +The **MQTT Number** {% term integration %} allows you to integrate devices that might expose configuration options through MQTT into Home Assistant as a Number. Every time a message under the `topic` in the configuration is received, the number entity will be updated in Home Assistant and vice-versa, keeping the device and Home Assistant in-sync. ## Configuration From 968eeccfd6697971eecff61987a9ef8c012a9404 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:16:43 +0100 Subject: [PATCH 61/78] Update mqtt_room.markdown --- source/_integrations/mqtt_room.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mqtt_room.markdown b/source/_integrations/mqtt_room.markdown index d5353c3d2120..4f96e4ea5af5 100644 --- a/source/_integrations/mqtt_room.markdown +++ b/source/_integrations/mqtt_room.markdown @@ -15,7 +15,7 @@ related: ha_quality_scale: legacy --- -The `mqtt_room` sensor {% term integration %} allows you to detect the indoor location of devices using MQTT clients. +The **MQTT room presence** {% term integration %} allows you to detect the indoor location of devices using MQTT clients. ## Configuration From 5c7205073cbf7453a5d9e722517b268313f1a46a Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:17:01 +0100 Subject: [PATCH 62/78] Update scene.mqtt.markdown --- source/_integrations/scene.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/scene.mqtt.markdown b/source/_integrations/scene.mqtt.markdown index e61adb97387d..7f0060faf093 100644 --- a/source/_integrations/scene.mqtt.markdown +++ b/source/_integrations/scene.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` scene platform lets you control your MQTT enabled scenes. +The **MQTT Scene** {% term integration %} lets you control your MQTT enabled scenes. ## Configuration From 0336489d819c19be8de9e5e2a2cf18ef8ce807c1 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:17:19 +0100 Subject: [PATCH 63/78] Update select.mqtt.markdown --- source/_integrations/select.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/select.mqtt.markdown b/source/_integrations/select.mqtt.markdown index 8223744e27d1..f7458eb0c166 100644 --- a/source/_integrations/select.mqtt.markdown +++ b/source/_integrations/select.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` Select platform allows you to integrate devices that might expose configuration options through MQTT into Home Assistant as a Select. Every time a message under the `topic` in the configuration is received, the select entity will be updated in Home Assistant and vice-versa, keeping the device and Home Assistant in sync. +The **MQTT Select** {% term integration %} allows you to integrate devices that might expose configuration options through MQTT into Home Assistant as a Select. Every time a message under the `topic` in the configuration is received, the select entity will be updated in Home Assistant and vice-versa, keeping the device and Home Assistant in sync. ## Configuration From 47e317c5093e2851a0d0497e49889ebbc29eb4eb Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:17:50 +0100 Subject: [PATCH 64/78] Update sensor.mqtt.markdown --- source/_integrations/sensor.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/sensor.mqtt.markdown b/source/_integrations/sensor.mqtt.markdown index 5ee1d6c86bb4..2cdd6a9a1da9 100644 --- a/source/_integrations/sensor.mqtt.markdown +++ b/source/_integrations/sensor.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -This `mqtt` sensor platform uses the MQTT message payload as the sensor value. If messages in this `state_topic` are published with *RETAIN* flag, the sensor will receive an instant update with last known value. Otherwise, the initial state will be undefined. +The **MQTT Sensor** {% term integration %} uses the MQTT message payload as the sensor value. If messages in this `state_topic` are published with *RETAIN* flag, the sensor will receive an instant update with last known value. Otherwise, the initial state will be undefined. ## Configuration From 6320e4074e3853b078c9798bd8926440fb47e50b Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:18:12 +0100 Subject: [PATCH 65/78] Update siren.mqtt.markdown --- source/_integrations/siren.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/siren.mqtt.markdown b/source/_integrations/siren.mqtt.markdown index e965a16dd40b..cdad06b527c9 100644 --- a/source/_integrations/siren.mqtt.markdown +++ b/source/_integrations/siren.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` siren platform lets you control your MQTT enabled sirens and text based notification devices. +The **MQTT Siren** {% term integration %} lets you control your MQTT enabled sirens and text based notification devices. ## Configuration From 92c80bd5d2719e103f054723051e824579d38b72 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:18:37 +0100 Subject: [PATCH 66/78] Update mqtt_statestream.markdown --- source/_integrations/mqtt_statestream.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mqtt_statestream.markdown b/source/_integrations/mqtt_statestream.markdown index cf4a6fb5d5f1..a9d2cc5746d1 100644 --- a/source/_integrations/mqtt_statestream.markdown +++ b/source/_integrations/mqtt_statestream.markdown @@ -13,7 +13,7 @@ related: ha_quality_scale: legacy --- -The `mqtt_statestream` {% term integration %} publishes state changes in Home Assistant to individual MQTT topics. [The MQTT integration](/integrations/mqtt/) is a prerequisite for MQTT Statestream to work. +The **MQTT Statestream** {% term integration %} publishes state changes in Home Assistant to individual MQTT topics. [The MQTT integration](/integrations/mqtt/) is a prerequisite for MQTT Statestream to work. ## Configuration From df1f1c72408d3b75f1a9cb1fe6455889e8ce7d63 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:19:00 +0100 Subject: [PATCH 67/78] Update switch.mqtt.markdown --- source/_integrations/switch.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/switch.mqtt.markdown b/source/_integrations/switch.mqtt.markdown index b6e7f348d677..c26d09a11af2 100644 --- a/source/_integrations/switch.mqtt.markdown +++ b/source/_integrations/switch.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` switch platform lets you control your MQTT enabled switches. +The **MQTT Switch** {% term integration %} lets you control your MQTT enabled switches. ## Configuration From 05884eda8dab31323e27240e8820f332c44d33fe Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:19:19 +0100 Subject: [PATCH 68/78] Update tag.mqtt.markdown --- source/_integrations/tag.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/tag.mqtt.markdown b/source/_integrations/tag.mqtt.markdown index 5d736f26e673..6a100b5981d3 100644 --- a/source/_integrations/tag.mqtt.markdown +++ b/source/_integrations/tag.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` tag scanner platform uses an MQTT message payload to generate tag scanned events. +The **MQTT tag scanner** {% term integration %} uses an MQTT message payload to generate tag scanned events. ## Configuration From 2b2193564e4289b8b3cd19cd9e015791f774ade9 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:19:42 +0100 Subject: [PATCH 69/78] Update text.mqtt.markdown --- source/_integrations/text.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/text.mqtt.markdown b/source/_integrations/text.mqtt.markdown index c5ef2f956352..8db5d07d09f6 100644 --- a/source/_integrations/text.mqtt.markdown +++ b/source/_integrations/text.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` Text platform allows you to integrate devices that show text that can be set remotely. Optionally the text state can be monitored too using MQTT. +The **MQTT Text** {% term integration %} allows you to integrate devices that show text that can be set remotely. Optionally the text state can be monitored too using MQTT. ## Configuration From 72d74509c8a1b7b30748304a004dbee02fc00540 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:20:01 +0100 Subject: [PATCH 70/78] Update update.mqtt.markdown --- source/_integrations/update.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/update.mqtt.markdown b/source/_integrations/update.mqtt.markdown index 6ef0c0bdec0a..0f1f4cd57a3b 100644 --- a/source/_integrations/update.mqtt.markdown +++ b/source/_integrations/update.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Configurable ha_domain: mqtt --- -The `mqtt` Update platform allows you to integrate devices that might expose firmware/software installed and the latest versions through MQTT into Home Assistant as an Update entity. Every time a message under the `topic` in the configuration is received, the entity will be updated in Home Assistant. +The **MQTT Update** {% term integration %} allows you to integrate devices that might expose firmware/software installed and the latest versions through MQTT into Home Assistant as an Update entity. Every time a message under the `topic` in the configuration is received, the entity will be updated in Home Assistant. ## Configuration From 882682f52a3a59dfa960f17c210808b6e17a55c3 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:20:22 +0100 Subject: [PATCH 71/78] Update vacuum.mqtt.markdown --- source/_integrations/vacuum.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/vacuum.mqtt.markdown b/source/_integrations/vacuum.mqtt.markdown index 3a3bf2e18f70..6f17d033f8ad 100644 --- a/source/_integrations/vacuum.mqtt.markdown +++ b/source/_integrations/vacuum.mqtt.markdown @@ -7,7 +7,7 @@ ha_release: 0.54 ha_domain: mqtt --- -The `mqtt` vacuum {% term integration %} allows you to control your MQTT-enabled vacuum. +The **MQTT Vacuum** {% term integration %} allows you to control your MQTT-enabled vacuum. The initial state of the MQTT vacuum {% term entity %} will set to `unknown` and can be reset by a device by sending a `null` payload as state. ## Configuration From 9aa18e7cba6434cbb0a13006af817f2698e0146d Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:20:40 +0100 Subject: [PATCH 72/78] Update valve.mqtt.markdown --- source/_integrations/valve.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/valve.mqtt.markdown b/source/_integrations/valve.mqtt.markdown index 03a7a8017365..314c9f6a22c1 100644 --- a/source/_integrations/valve.mqtt.markdown +++ b/source/_integrations/valve.mqtt.markdown @@ -8,7 +8,7 @@ ha_release: 2024.1 ha_domain: mqtt --- -The `mqtt` valve platform allows you to control an MQTT valve (such a gas or water valve). +The **MQTT Valve** {% term integration %} allows you to control an MQTT valve (such a gas or water valve). ## Configuration From 07c6532f24986a9f65591f05698b342432485cd2 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:20:59 +0100 Subject: [PATCH 73/78] Update water_heater.mqtt.markdown --- source/_integrations/water_heater.mqtt.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/water_heater.mqtt.markdown b/source/_integrations/water_heater.mqtt.markdown index 4a64a489680d..ecf0a4d0b3aa 100644 --- a/source/_integrations/water_heater.mqtt.markdown +++ b/source/_integrations/water_heater.mqtt.markdown @@ -8,7 +8,7 @@ ha_iot_class: Local Polling ha_domain: mqtt --- -The `mqtt` water heater platform lets you control your MQTT enabled water heater devices. +The **MQTT water heater** {% term integration %} lets you control your MQTT enabled water heater devices. ## Configuration From 1965431cc639f8822b0ee17d1f674cc48981cdd5 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:21:19 +0100 Subject: [PATCH 74/78] Update mullvad.markdown --- source/_integrations/mullvad.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mullvad.markdown b/source/_integrations/mullvad.markdown index f7a5ee04650f..520bf23adf65 100644 --- a/source/_integrations/mullvad.markdown +++ b/source/_integrations/mullvad.markdown @@ -15,7 +15,7 @@ ha_platforms: ha_integration_type: integration --- -The Mullvad VPN {% term integration %} uses the [Mullvad](https://mullvad.net/) VPN API to detect if your Home Assistant instance is connected to the Mullvad VPN service. +The **Mullvad VPN** {% term integration %} uses the [Mullvad](https://mullvad.net/) VPN API to detect if your Home Assistant instance is connected to the Mullvad VPN service. ![](/images/screenshots/mullvad_vpn_sample_sensor_connected.png) From 9648e8e6b7bca0d5784a87efddd20c7b30256dc8 Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:21:35 +0100 Subject: [PATCH 75/78] Update mpd.markdown --- source/_integrations/mpd.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mpd.markdown b/source/_integrations/mpd.markdown index fa5563974948..85a1475c0919 100644 --- a/source/_integrations/mpd.markdown +++ b/source/_integrations/mpd.markdown @@ -15,7 +15,7 @@ related: ha_config_flow: true --- -The Music Player Daemon {% term integration %} allows you to control a [Music Player Daemon](https://www.musicpd.org/) from Home Assistant. Unfortunately, it does not allow you to manipulate the playlist (add or delete songs) or add transitions between the songs. +The **Music Player Daemon** {% term integration %} allows you to control a [Music Player Daemon](https://www.musicpd.org/) from Home Assistant. Unfortunately, it does not allow you to manipulate the playlist (add or delete songs) or add transitions between the songs. Even though no playlist manipulation is possible, it is possible to use the `play_media` action to load an existing saved playlist as part of an automation or scene. From 013b4e318a219102fddca8ca0e04b8c3cb3599bb Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:22:00 +0100 Subject: [PATCH 76/78] Update yamaha_musiccast.markdown --- source/_integrations/yamaha_musiccast.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/yamaha_musiccast.markdown b/source/_integrations/yamaha_musiccast.markdown index 3693924fe245..f518e60b7dee 100644 --- a/source/_integrations/yamaha_musiccast.markdown +++ b/source/_integrations/yamaha_musiccast.markdown @@ -19,7 +19,7 @@ ha_platforms: ha_integration_type: integration --- -The Yamaha **MusicCast** {% term integration %} allows you to control [Yamaha MusicCast Receivers](https://usa.yamaha.com/products/audio_visual/musiccast/index.html) from Home Assistant. +The **Yamaha MusicCast** {% term integration %} allows you to control [Yamaha MusicCast Receivers](https://usa.yamaha.com/products/audio_visual/musiccast/index.html) from Home Assistant. Supported devices are listed on their [site](https://usa.yamaha.com/products/contents/audio_visual/musiccast/musiccast-compatiblity.html). From b1522bc6282b63c8842cb5f26e653267563c4d0c Mon Sep 17 00:00:00 2001 From: smarthome-10 Date: Fri, 12 Dec 2025 20:22:46 +0100 Subject: [PATCH 77/78] Update mutesync.markdown --- source/_integrations/mutesync.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/mutesync.markdown b/source/_integrations/mutesync.markdown index 9421b558bd12..f9918ee4696e 100644 --- a/source/_integrations/mutesync.markdown +++ b/source/_integrations/mutesync.markdown @@ -14,7 +14,7 @@ ha_platforms: ha_integration_type: integration --- -The mutesync integration for Home Assistant connects to the [mütesync virtual button](https://mutesync.com/). This tray app pairs with popular video conferencing tools such as Zoom, Google Meet, Discord, and Teams. +The **mutesync** {% term integration %} for Home Assistant connects to the [mütesync virtual button](https://mutesync.com/). This tray app pairs with popular video conferencing tools such as Zoom, Google Meet, Discord, and Teams. With this integration, Home Assistant can track when you're in a meeting and whether your mic is muted/unmuted. From f42774eb64b2ab977583bb458cc55a2cc2923a27 Mon Sep 17 00:00:00 2001 From: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com> Date: Sat, 13 Dec 2025 05:17:49 +0100 Subject: [PATCH 78/78] tweak spelling for linter --- source/_integrations/microsoft.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/microsoft.markdown b/source/_integrations/microsoft.markdown index e7027111b6f3..7e347dcc6cff 100644 --- a/source/_integrations/microsoft.markdown +++ b/source/_integrations/microsoft.markdown @@ -15,7 +15,7 @@ related: ha_quality_scale: legacy --- -The **Microsoft Text-to-Speech** {% term integration %} uses the [TTS engine of the Microsoft Speech Service](https://learn.microsoft.com/azure/cognitive-services/speech-service/text-to-speech) to read a text with natural sounding voices. This integration uses an API that is part of the Cognitive Services offering and is known as the Microsoft Speech API. For this integration to work, you need a free API key. You can use your [Azure subscription](https://azure.microsoft.com) to create an [Azure Speech resource](https://portal.azure.com/#create/Microsoft.CognitiveServicesSpeechServices). +The **Microsoft text-to-speech** {% term integration %} uses the [TTS engine of the Microsoft Speech Service](https://learn.microsoft.com/azure/cognitive-services/speech-service/text-to-speech) to read a text with natural sounding voices. This integration uses an API that is part of the Cognitive Services offering and is known as the Microsoft Speech API. For this integration to work, you need a free API key. You can use your [Azure subscription](https://azure.microsoft.com) to create an [Azure Speech resource](https://portal.azure.com/#create/Microsoft.CognitiveServicesSpeechServices). ## Configuration