diff --git a/source/_integrations/acer_projector.markdown b/source/_integrations/acer_projector.markdown
index b6aea80c8324..5b56d07ced35 100644
--- a/source/_integrations/acer_projector.markdown
+++ b/source/_integrations/acer_projector.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `acer_projector` switch platform allows you to control the state of RS232 connected projectors from [Acer](https://www.acer.com/).
+The **Acer Projector** integration allows you to control the state of RS232 connected projectors from [Acer](https://www.acer.com/).
 
 ## Configuration
 
diff --git a/source/_integrations/ads.markdown b/source/_integrations/ads.markdown
index ca35f9251f2b..8222349a404f 100644
--- a/source/_integrations/ads.markdown
+++ b/source/_integrations/ads.markdown
@@ -29,7 +29,7 @@ ha_codeowners:
 ha_quality_scale: legacy
 ---
 
-The ADS (automation device specification) describes a device-independent and fieldbus independent interface for communication between [Beckhoff](https://www.beckhoff.com/) automation devices running [TwinCAT](https://www.beckhoff.com/en-en/products/automation/twincat/) and other devices implementing this interface.
+The **ADS** (automation device specification) {% term integration %} describes a device-independent and fieldbus independent interface for communication between [Beckhoff](https://www.beckhoff.com/) automation devices running [TwinCAT](https://www.beckhoff.com/en-en/products/automation/twincat/) and other devices implementing this interface.
 
 There is currently support for the following device types within Home Assistant:
 
diff --git a/source/_integrations/aemet.markdown b/source/_integrations/aemet.markdown
index 0c439a02c8cf..48e3c1d8a2dd 100644
--- a/source/_integrations/aemet.markdown
+++ b/source/_integrations/aemet.markdown
@@ -18,7 +18,7 @@ ha_codeowners:
   - '@Noltari'
 ---
 
-The AEMET weather platform uses [AEMET OpenData](https://opendata.aemet.es/) as a source for current meteorological data for your location. AEMET stands for "Agencia Estatal de Meteorología", which is the Spanish Meteorological Agency.
+The **AEMET** {% term integration %} uses [AEMET OpenData](https://opendata.aemet.es/) as a source for current meteorological data for your location. AEMET stands for "Agencia Estatal de Meteorología", which is the Spanish Meteorological Agency.
 
 There is currently support for the following entity types within Home Assistant:
 
diff --git a/source/_integrations/aftership.markdown b/source/_integrations/aftership.markdown
index 7aed005d39db..2b47e8d6797c 100644
--- a/source/_integrations/aftership.markdown
+++ b/source/_integrations/aftership.markdown
@@ -12,7 +12,7 @@ ha_integration_type: integration
 ha_config_flow: true
 ---
 
-The `aftership` platform allows one to track deliveries by [AfterShip](https://www.aftership.com), a service that supports 490+ couriers worldwide. To use the tracking API functionality, the Pro plan is required. 
+The **AfterShip** {% term integration %} allows one to track deliveries by [AfterShip](https://www.aftership.com), a service that supports 490+ couriers worldwide. To use the tracking API functionality, the Pro plan is required. 
 
 The sensor value shows the number of packages that are not in `Delivered` state. As attributes are the number of packages per status.
 
diff --git a/source/_integrations/airgradient.markdown b/source/_integrations/airgradient.markdown
index fe457392251c..0d407171a5f5 100644
--- a/source/_integrations/airgradient.markdown
+++ b/source/_integrations/airgradient.markdown
@@ -27,7 +27,7 @@ works_with:
 ha_quality_scale: platinum
 ---
 
-The AirGradient {% term integration %} will fetch data from your [AirGradient devices](https://www.airgradient.com/).
+The **AirGradient** {% term integration %} will fetch data from your [AirGradient devices](https://www.airgradient.com/).
 AirGradient creates indoor and outdoor air quality monitors that enable you to know if the air quality is healthy or not. They measure metrics such as PM2.5, CO2, TVOCs, and NOx. Both the software and hardware are open-source, allowing you to customize or extend the device functionality. 
 
 ## Use cases
diff --git a/source/_integrations/airtouch5.markdown b/source/_integrations/airtouch5.markdown
index 95faeb70d1fb..3f1daa0a4e08 100644
--- a/source/_integrations/airtouch5.markdown
+++ b/source/_integrations/airtouch5.markdown
@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The AirTouch 5 integration allows you to control ducted air conditioning systems that are using the [AirTouch 5](https://www.airtouch.net.au/smart-air-conditioning/airtouch-5/) controller.
+The **AirTouch 5** {% term integration %} allows you to control ducted air conditioning systems that are using the [AirTouch 5](https://www.airtouch.net.au/smart-air-conditioning/airtouch-5/) controller.
 
 {% include integrations/config_flow.md %}
 
diff --git a/source/_integrations/airvisual.markdown b/source/_integrations/airvisual.markdown
index ec2e0337ae12..de6d856dddbd 100644
--- a/source/_integrations/airvisual.markdown
+++ b/source/_integrations/airvisual.markdown
@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: service
 ---
 
-The `airvisual` sensor platform queries the [AirVisual](https://www.iqair.com) cloud API for air quality data. Data can be collected via latitude/longitude or city/state/country.
+The **AirVisual Cloud** integration queries the [AirVisual](https://www.iqair.com) cloud API for air quality data. Data can be collected via latitude/longitude or city/state/country.
 
 ## Using the AirVisual Cloud API
 
diff --git a/source/_integrations/airzone.markdown b/source/_integrations/airzone.markdown
index 9a0f7fe64a30..044908a633e4 100644
--- a/source/_integrations/airzone.markdown
+++ b/source/_integrations/airzone.markdown
@@ -26,7 +26,7 @@ ha_integration_type: integration
 ha_dhcp: true
 ---
 
-This integration interacts with the Local API of [Airzone HVAC zoning systems](https://www.airzone.es/en/).
+This {% term integration %} interacts with the Local API of [Airzone HVAC zoning systems](https://www.airzone.es/en/).
 
 A typical Airzone device has a *parent zone* (Master Thermostat) per HVAC system, which is the only zone where the HVAC mode can be changed. The rest are *child zones* which can only enable or disable the HVAC and adjust the desired temperature on that specific zone.
 
diff --git a/source/_integrations/airzone_cloud.markdown b/source/_integrations/airzone_cloud.markdown
index e6099354788a..b778870672d2 100644
--- a/source/_integrations/airzone_cloud.markdown
+++ b/source/_integrations/airzone_cloud.markdown
@@ -25,7 +25,7 @@ ha_codeowners:
 ha_integration_type: integration
 ---
 
-This integration interacts with the Cloud API of [Airzone devices](https://www.airzone.es/en/).
+This {% term integration %} interacts with the Cloud API of [Airzone devices](https://www.airzone.es/en/).
 
 There are two main types of Airzone devices:
 - [Aidoo](https://www.airzonecontrol.com/aa/en/control-solutions/aidoo/wi-fi/) / [Aidoo Pro](https://www.airzonecontrol.com/aa/en/control-solutions/aidoo/pro/)
diff --git a/source/_integrations/aladdin_connect.markdown b/source/_integrations/aladdin_connect.markdown
index be401e1771a6..01526e6cc096 100644
--- a/source/_integrations/aladdin_connect.markdown
+++ b/source/_integrations/aladdin_connect.markdown
@@ -16,7 +16,7 @@ ha_config_flow: true
 ha_dhcp: true
 ---
 
-The Aladdin Connect {% term integration %} lets you control Genie Aladdin Connect garage doors through Home Assistant.
+The **Aladdin Connect** {% term integration %} lets you control Genie Aladdin Connect garage doors through Home Assistant.
 
 {% note %}
 Only doors that are owned by your Aladdin Connect account will be available. Doors that your account has been granted shared access to are not yet supported.
diff --git a/source/_integrations/alert.markdown b/source/_integrations/alert.markdown
index d964b359930f..6422e658a5eb 100644
--- a/source/_integrations/alert.markdown
+++ b/source/_integrations/alert.markdown
@@ -16,7 +16,7 @@ related:
     title: Configuration file
 ---
 
-The `alert` {% term integration %} is designed to notify you when problematic issues arise.
+The **Alert** {% term integration %} is designed to notify you when problematic issues arise.
 For example, if the garage door is left open, the `alert` integration can be used
 to remind you of this by sending you repeating notifications at customizable
 intervals. This is also used for low battery sensors,
diff --git a/source/_integrations/alpha_vantage.markdown b/source/_integrations/alpha_vantage.markdown
index ac7b6ef3d399..e9e77f9caead 100644
--- a/source/_integrations/alpha_vantage.markdown
+++ b/source/_integrations/alpha_vantage.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `alpha_vantage` sensor platform uses [Alpha Vantage](https://www.alphavantage.co) to monitor the stock market. This platform also provides detail about exchange rates.
+The **Alpha Vantage** {% term integration %} uses [Alpha Vantage](https://www.alphavantage.co) to monitor the stock market. This platform also provides detail about exchange rates.
 
 To enable the `alpha_vantage` platform, add the following lines to your {% term "`configuration.yaml`" %} file.
 {% include integrations/restart_ha_after_config_inclusion.md %}
diff --git a/source/_integrations/amazon_polly.markdown b/source/_integrations/amazon_polly.markdown
index 6c41f8b48478..a68391291f21 100644
--- a/source/_integrations/amazon_polly.markdown
+++ b/source/_integrations/amazon_polly.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `amazon_polly` text-to-speech platform that works with [Amazon Polly](https://aws.amazon.com/polly/) to create the spoken output.
+The **Amazon Polly** {% term integration %} works with [Amazon Polly](https://aws.amazon.com/polly/) to create the spoken output.
 Polly is a paid service via Amazon Web Services.  There is a [free tier](https://aws.amazon.com/polly/pricing/) for the first 12 months and then a charge per million characters afterwards.
 
 ## Setup
diff --git a/source/_integrations/amcrest.markdown b/source/_integrations/amcrest.markdown
index 3f722e85132f..abb03754fe78 100644
--- a/source/_integrations/amcrest.markdown
+++ b/source/_integrations/amcrest.markdown
@@ -23,7 +23,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `amcrest` camera platform allows you to integrate your [Amcrest](https://amcrest.com/) or Dahua IP camera or doorbell in Home Assistant.
+The **Amcrest** {% term integration %} allows you to integrate your [Amcrest](https://amcrest.com/) or Dahua IP camera or doorbell in Home Assistant.
 
 There is currently support for the following {% term device %} types within Home Assistant:
 
diff --git a/source/_integrations/ampio.markdown b/source/_integrations/ampio.markdown
index 865f946effeb..e7bac4c57cbe 100644
--- a/source/_integrations/ampio.markdown
+++ b/source/_integrations/ampio.markdown
@@ -16,7 +16,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `ampio` air quality platform will query the open data API of [ampio.pl](http://smog.ampio.pl/) to monitor air quality sensor station.
+The **Ampio** {% term integration %} will query the open data API of [ampio.pl](http://smog.ampio.pl/) to monitor air quality sensor station.
 
 ## Setup
 
diff --git a/source/_integrations/anel_pwrctrl.markdown b/source/_integrations/anel_pwrctrl.markdown
index c96c36803ae5..d2b009472267 100644
--- a/source/_integrations/anel_pwrctrl.markdown
+++ b/source/_integrations/anel_pwrctrl.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `anel_pwrctrl` switch platform allows you to control [ANEL PwrCtrl](https://en.anel.eu/index.htm?src=/produkte/produkte.htm) devices on firmware 6.x and older. [ANEL PwrCtrl](https://en.anel.eu/index.htm?src=/produkte/produkte.htm) devices on firmware 7.x are not supported.
+The **Anel NET-PwrCtrl** {% term integration %} allows you to control [ANEL PwrCtrl](https://en.anel.eu/index.htm?src=/produkte/produkte.htm) devices on firmware 6.x and older. [ANEL PwrCtrl](https://en.anel.eu/index.htm?src=/produkte/produkte.htm) devices on firmware 7.x are not supported.
 
 Supported devices (tested):
 
diff --git a/source/_integrations/anova.markdown b/source/_integrations/anova.markdown
index e14711308d7f..0a12a09ed2b0 100644
--- a/source/_integrations/anova.markdown
+++ b/source/_integrations/anova.markdown
@@ -14,7 +14,7 @@ ha_platforms:
   - sensor
 ---
 
-The Anova sensor platform allows you to control [Anova](https://anovaculinary.com/pages/find-your-anova-precision-cooker) sous vides with Wi-Fi capability.
+The **Anova** {% term integration %} allows you to control [Anova](https://anovaculinary.com/pages/find-your-anova-precision-cooker) sous vides with Wi-Fi capability.
 
 Supported devices (tested):
 - AN500-10 (Anova Precision Cooker)
diff --git a/source/_integrations/aosmith.markdown b/source/_integrations/aosmith.markdown
index 40d18a585e44..6adf2a8420c7 100644
--- a/source/_integrations/aosmith.markdown
+++ b/source/_integrations/aosmith.markdown
@@ -17,7 +17,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The A. O. Smith {% term integration %} allows you to control a compatible A. O. Smith iCOMM-enabled water heater from Home Assistant.
+The **A. O. Smith** {% term integration %} allows you to control a compatible A. O. Smith iCOMM-enabled water heater from Home Assistant.
 
 Before using this integration, your water heater must be connected to a Wi-Fi network and linked to your account using the A. O. Smith mobile app ([iOS](https://apps.apple.com/app/id456489822)/[Android](https://play.google.com/store/apps/details?id=com.aosmith.warrantycheck)).
 
diff --git a/source/_integrations/aprs.markdown b/source/_integrations/aprs.markdown
index 61653a92d0bb..ac46942d4330 100644
--- a/source/_integrations/aprs.markdown
+++ b/source/_integrations/aprs.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `aprs` [(Automatic Packet Reporting System)](https://en.wikipedia.org/wiki/Automatic_Packet_Reporting_System) device tracker {% term integration %} connects to the [APRS-IS](http://aprs-is.net/) network for tracking amateur radio devices.
+The **APRS** [(Automatic Packet Reporting System)](https://en.wikipedia.org/wiki/Automatic_Packet_Reporting_System) {% term integration %} connects to the [APRS-IS](http://aprs-is.net/) network for tracking amateur radio devices.
 
 ## Configuration
 
diff --git a/source/_integrations/aqualogic.markdown b/source/_integrations/aqualogic.markdown
index 4235d1317f70..b75acc74c609 100644
--- a/source/_integrations/aqualogic.markdown
+++ b/source/_integrations/aqualogic.markdown
@@ -18,7 +18,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The AquaLogic {% term integration %} provides connectivity to a Hayward/Goldline AquaLogic/ProLogic pool controller. Note that an RS-485 to Ethernet adapter connected to the pool controller is required.
+The **AquaLogic** {% term integration %} provides connectivity to a Hayward/Goldline AquaLogic/ProLogic pool controller. Note that an RS-485 to Ethernet adapter connected to the pool controller is required.
 
 There is currently support for the following device types within Home Assistant:
 
diff --git a/source/_integrations/arcam_fmj.markdown b/source/_integrations/arcam_fmj.markdown
index 417a60369e71..625e350e350d 100644
--- a/source/_integrations/arcam_fmj.markdown
+++ b/source/_integrations/arcam_fmj.markdown
@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `arcam_fmj` integration allows you to control [Arcam Receivers and Processors](https://www.arcam.co.uk/range/fmj.htm) from Home Assistant.
+The **Arcam FMJ Receivers** integration allows you to control [Arcam Receivers and Processors](https://www.arcam.co.uk/range/fmj.htm) from Home Assistant.
 
 Supported devices:
 
diff --git a/source/_integrations/arris_tg2492lg.markdown b/source/_integrations/arris_tg2492lg.markdown
index a56af77f0f37..4e3450faa0fc 100644
--- a/source/_integrations/arris_tg2492lg.markdown
+++ b/source/_integrations/arris_tg2492lg.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-This platform allows you to detect presence by looking at connected devices to an Arris TG2492LG router.
+This {% term integration %} allows you to detect presence by looking at connected devices to an Arris TG2492LG router.
 
 This is one of the routers provided by:
 
diff --git a/source/_integrations/aruba.markdown b/source/_integrations/aruba.markdown
index a1142e5c21cc..58f8781480af 100644
--- a/source/_integrations/aruba.markdown
+++ b/source/_integrations/aruba.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-This platform allows you to detect presence by looking at connected devices to an [Aruba Instant](https://www.arubanetworks.com/products/networking/aruba-instant/) device.
+This {% term integration %} allows you to detect presence by looking at connected devices to an [Aruba Instant](https://www.arubanetworks.com/products/networking/aruba-instant/) device.
 
 Supported devices (tested):
 
diff --git a/source/_integrations/arwn.markdown b/source/_integrations/arwn.markdown
index ac27a86bd367..92501ff10137 100644
--- a/source/_integrations/arwn.markdown
+++ b/source/_integrations/arwn.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `arwn` sensor platform is a client for the [Ambient Radio Weather Network](https://github.com/sdague/arwn) project. This collects weather station data and makes it available in an MQTT subtree.
+The **Ambient Radio Weather Network** {% term integration %} is a client for the [Ambient Radio Weather Network](https://github.com/sdague/arwn) project. This collects weather station data and makes it available in an MQTT subtree.
 
 To use your ARWN setup, you must already have configured the [MQTT](/integrations/mqtt/) platform. Then add the following to your {% term "`configuration.yaml`" %} file.
 {% include integrations/restart_ha_after_config_inclusion.md %}
diff --git a/source/_integrations/aseko_pool_live.markdown b/source/_integrations/aseko_pool_live.markdown
index 1063605df6ca..dd0db4e1ff84 100644
--- a/source/_integrations/aseko_pool_live.markdown
+++ b/source/_integrations/aseko_pool_live.markdown
@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Aseko Pool Live {% term integration %} allows you to monitor your Aseko ASIN Aqua dosing systems and Aseko ASIN Pool controllers.
+The **Aseko Pool Live** {% term integration %} allows you to monitor your Aseko ASIN Aqua dosing systems and Aseko ASIN Pool controllers.
 
 The integration is fully compatible with ASIN AQUA Net and ASIN AQUA Home.
 
diff --git a/source/_integrations/assist_pipeline.markdown b/source/_integrations/assist_pipeline.markdown
index 04d66fe00689..a0ef5c90a145 100644
--- a/source/_integrations/assist_pipeline.markdown
+++ b/source/_integrations/assist_pipeline.markdown
@@ -22,7 +22,7 @@ related:
     title: Assist
 ---
 
-The Assist pipeline {% term integration %} provides the foundation for the [Assist](/voice_control/) voice assistant in Home Assistant.
+The **Assist pipeline** {% term integration %} provides the foundation for the [Assist](/voice_control/) voice assistant in Home Assistant.
 
 For most users, there is no need to install this integration manually. The Assist pipeline integration is part of the default configuration and is set up automatically if needed by other integrations.
 If you are not using the default {% term integration %}, you need to add the following to your {% term "`configuration.yaml`" %} file.
diff --git a/source/_integrations/asuswrt.markdown b/source/_integrations/asuswrt.markdown
index 545a03e59ee5..7a8d405abc1f 100644
--- a/source/_integrations/asuswrt.markdown
+++ b/source/_integrations/asuswrt.markdown
@@ -20,7 +20,7 @@ ha_platforms:
 ha_integration_type: hub
 ---
 
-The ASUSWRT integration can connect Home Assistant to a ASUS router that runs on ASUSWRT firmware.
+The **ASUSWRT** {% term integration %} can connect Home Assistant to a ASUS router that runs on ASUSWRT firmware.
 
 There is currently support for the following device types within Home Assistant:
 
diff --git a/source/_integrations/atag.markdown b/source/_integrations/atag.markdown
index 02de4dbedd39..26651fa040bc 100644
--- a/source/_integrations/atag.markdown
+++ b/source/_integrations/atag.markdown
@@ -18,7 +18,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `Atag` integration allows Home Assistant to connect to [Atag One](https://www.atagverwarming.nl) thermostats, reporting and setting its status.
+The **Atag** {% term integration %} allows Home Assistant to connect to [Atag One](https://www.atagverwarming.nl) thermostats, reporting and setting its status.
 The integration implements the following platforms:
 
 - Climate
diff --git a/source/_integrations/aten_pe.markdown b/source/_integrations/aten_pe.markdown
index e674ee38cfb9..e91398525cde 100644
--- a/source/_integrations/aten_pe.markdown
+++ b/source/_integrations/aten_pe.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `aten_pe` {% term integration %} lets you control [ATEN Rack PDUs](https://www.aten.com/eu/en/products/energy-intelligence-pduupsracks/rack-pdu/) from Home Assistant.
+The **ATEN Rack PDU** {% term integration %} lets you control [ATEN Rack PDUs](https://www.aten.com/eu/en/products/energy-intelligence-pduupsracks/rack-pdu/) from Home Assistant.
 
 In order to use it, SNMP must be enabled on your PDU. It is recommended to use SNMPv3 to protect your credentials from eavesdropping.
 
diff --git a/source/_integrations/atome.markdown b/source/_integrations/atome.markdown
index 5c5943b2a589..618e88a89b34 100644
--- a/source/_integrations/atome.markdown
+++ b/source/_integrations/atome.markdown
@@ -18,7 +18,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `atome` sensor platform is retrieving the consumption of your home from the [Direct Energy Atome electric meter](https://total.direct-energie.com/particuliers/electricite/compteur-linky/atome).
+The **Atome Linky** {% term integration %} is retrieving the consumption of your home from the [Direct Energy Atome electric meter](https://total.direct-energie.com/particuliers/electricite/compteur-linky/atome).
 This special little device is connected to a Linky Electric Meter, and sends live data to a cloud platform.
 
 As there is no official documentation for the API, the integration retrieves data from the API used in the Atome mobile app, [hosted here](https://esoftlink.esoftthings.com/).
diff --git a/source/_integrations/august.markdown b/source/_integrations/august.markdown
index 1b34cfd40bfd..270a33603d80 100644
--- a/source/_integrations/august.markdown
+++ b/source/_integrations/august.markdown
@@ -27,7 +27,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `august` integration allows you to integrate your [August](https://august.com/) and some Yale Access devices in Home Assistant.
+The **August** {% term integration %} allows you to integrate your [August](https://august.com/) and some Yale Access devices in Home Assistant.
 
 For devices that use the [Yale Home](https://yalehome.com/global) app, the [Yale](/integrations/yale) integration should be used instead.
 
diff --git a/source/_integrations/aurora.markdown b/source/_integrations/aurora.markdown
index e179185786a7..52af230fa681 100644
--- a/source/_integrations/aurora.markdown
+++ b/source/_integrations/aurora.markdown
@@ -15,7 +15,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `aurora` platform uses the [NOAA Aurora Forecast](https://www.swpc.noaa.gov/products/aurora-30-minute-forecast) action to let you know if an aurora might be visible at your home location in the next 30 minutes, based off of current solar flare activity.
+The **Aurora** {% term integration %} uses the [NOAA Aurora Forecast](https://www.swpc.noaa.gov/products/aurora-30-minute-forecast) action to let you know if an aurora might be visible at your home location in the next 30 minutes, based off of current solar flare activity.
 
 This service gives a number 0-100 representing the current likelihood of visible auroras at your latitude/longitude. By default this sensor is set up to trigger when the reported likelihood for your location is > 75. It updates every 5 minutes.
 
diff --git a/source/_integrations/aurora_abb_powerone.markdown b/source/_integrations/aurora_abb_powerone.markdown
index cc1be66b23c9..56f672c01ebb 100644
--- a/source/_integrations/aurora_abb_powerone.markdown
+++ b/source/_integrations/aurora_abb_powerone.markdown
@@ -15,7 +15,7 @@ ha_config_flow: true
 ha_integration_type: device
 ---
 
-This implements a direct RS485 connection to a solar inverter in the
+This {% term integration %} implements a direct RS485 connection to a solar inverter in the
 PVI-3.0/3.6/4.2-TL-OUTD ABB series, and may work on others.
 The inverter was formerly made by PowerOne who got taken over by ABB.
 
diff --git a/source/_integrations/awair.markdown b/source/_integrations/awair.markdown
index 334e1cf0650b..69cc92837949 100644
--- a/source/_integrations/awair.markdown
+++ b/source/_integrations/awair.markdown
@@ -16,13 +16,13 @@ ha_integration_type: integration
 ha_zeroconf: true
 ---
 
-The Awair {% term integration %} will fetch data from your [Awair devices](https://getawair.com).
+The **Awair** {% term integration %} will fetch data from your [Awair devices](https://getawair.com).
 
 ## Prerequisites
 
 ### Connect locally (preferred)
 
-When connecting locally, the integration will poll the device every 30 seconds. Awair provides a [list of devices](https://support.getawair.com/hc/en-us/articles/360049221014-Awair-Element-Local-API-Feature#h_01F40FB3ETMR4TZKPVXJNE86HQ) that support the Local API. This API must be enabled via the Awair app via [these steps](https://support.getawair.com/hc/en-us/articles/360049221014-Awair-Element-Local-API-Feature#h_01F40FBBW5323GBPV7D6XMG4J8). If you add new Awair devices to your home, you must follow these steps again.
+When connecting locally, the integration will poll the device every 30 seconds. Awair provides a [list of devices](https://support.getawair.com/hc/articles/360049221014#h_01F40FB3ETMR4TZKPVXJNE86HQ) that support the Local API. This API must be enabled via the Awair app via [these steps](https://support.getawair.com/hc/articles/360049221014#h_01F40FBBW5323GBPV7D6XMG4J8). If you add new Awair devices to your home, you must follow these steps again.
 
 ### Connect via the cloud
 
diff --git a/source/_integrations/aws.markdown b/source/_integrations/aws.markdown
index f7b5897ab966..23fb6da407dc 100644
--- a/source/_integrations/aws.markdown
+++ b/source/_integrations/aws.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `aws` {% term integration %} provides a single place to interact with [Amazon Web Services](https://aws.amazon.com/). Currently it provides a notification platform that can send a message to [AWS SQS](https://aws.amazon.com/sqs/), [AWS SNS](https://aws.amazon.com/sns/), or invoke [AWS Lambda](https://aws.amazon.com/lambda/) functions.
+The **AWS** {% term integration %} provides a single place to interact with [Amazon Web Services](https://aws.amazon.com/). Currently it provides a notification platform that can send a message to [AWS SQS](https://aws.amazon.com/sqs/), [AWS SNS](https://aws.amazon.com/sns/), or invoke [AWS Lambda](https://aws.amazon.com/lambda/) functions.
 
 ## Setup
 
diff --git a/source/_integrations/azure_devops.markdown b/source/_integrations/azure_devops.markdown
index 646ac0c80192..e32b75e6c739 100644
--- a/source/_integrations/azure_devops.markdown
+++ b/source/_integrations/azure_devops.markdown
@@ -14,7 +14,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The Azure DevOps {% term integration %} allows you to control and monitor your
+The **Azure DevOps** {% term integration %} allows you to control and monitor your
 Azure DevOps instance in Home Assistant.
 
 {% include integrations/config_flow.md %}
diff --git a/source/_integrations/azure_event_hub.markdown b/source/_integrations/azure_event_hub.markdown
index 452a7336c2d5..507cde8c0e94 100644
--- a/source/_integrations/azure_event_hub.markdown
+++ b/source/_integrations/azure_event_hub.markdown
@@ -15,7 +15,7 @@ related:
     title: Configuration file
 ---
 
-The `Azure Event Hub` {% term integration %} allows you to hook into the Home Assistant event bus and send events to [Azure Event Hub](https://azure.microsoft.com/products/event-hubs/) or to an [Azure IoT Hub](https://learn.microsoft.com/azure/iot-hub/iot-hub-devguide-messages-read-builtin).
+The **Azure Event Hub** {% term integration %} allows you to hook into the Home Assistant event bus and send events to [Azure Event Hub](https://azure.microsoft.com/products/event-hubs/) or to an [Azure IoT Hub](https://learn.microsoft.com/azure/iot-hub/iot-hub-devguide-messages-read-builtin).
 
 ## First time setup
 
diff --git a/source/_integrations/azure_service_bus.markdown b/source/_integrations/azure_service_bus.markdown
index c40428739348..d04065aed4d2 100644
--- a/source/_integrations/azure_service_bus.markdown
+++ b/source/_integrations/azure_service_bus.markdown
@@ -17,7 +17,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `Azure Service Bus` {% term integration %} allows you to send messages to [Azure Service Bus](https://azure.microsoft.com/products/service-bus/) from within Home Assistant.
+The **Azure Service Bus** {% term integration %} allows you to send messages to [Azure Service Bus](https://azure.microsoft.com/products/service-bus/) from within Home Assistant.
 
 ## First-time setup
 
diff --git a/source/_integrations/cppm_tracker.markdown b/source/_integrations/cppm_tracker.markdown
index 5c55c6674994..df6fbd6e34f0 100644
--- a/source/_integrations/cppm_tracker.markdown
+++ b/source/_integrations/cppm_tracker.markdown
@@ -12,7 +12,7 @@ ha_integration_type: integration
 ha_quality_scale: legacy
 ---
 
-This platform allows you to detect presence by looking at connected devices to [Aruba Clearpass](https://www.arubanetworks.com/products/security/network-access-control/).
+This {% term integration %} allows you to detect presence by looking at connected devices to [Aruba Clearpass](https://www.arubanetworks.com/products/security/network-access-control/).
 
 Supported platforms (tested):
 
diff --git a/source/_integrations/ialarm.markdown b/source/_integrations/ialarm.markdown
index 9ba1bb2ea0d1..692ade1bd1a2 100644
--- a/source/_integrations/ialarm.markdown
+++ b/source/_integrations/ialarm.markdown
@@ -14,7 +14,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The iAlarm {% term integration %} provides connectivity with the [Antifurto365](https://www.antifurtocasa365.it/) iAlarm alarm systems and has also been confirmed to work with the alarm system brands Meian and Emooluxr.
+The **iAlarm** {% term integration %} provides connectivity with the [Antifurto365](https://www.antifurtocasa365.it/) iAlarm alarm systems and has also been confirmed to work with the alarm system brands Meian and Emooluxr.
 Please note that the latest iAlarm-XR alarm system is not supported.
 
 This platform supports the following actions:
diff --git a/source/_integrations/icloud.markdown b/source/_integrations/icloud.markdown
index 7a7b3704eed5..ca58ae03171f 100644
--- a/source/_integrations/icloud.markdown
+++ b/source/_integrations/icloud.markdown
@@ -17,7 +17,7 @@ ha_platforms:
 ha_integration_type: integration
 ---
 
-The `icloud` {% term integration %} allows you to detect presence using the [iCloud](https://www.icloud.com/) service. iCloud allows users to track their location on iOS devices.
+The **Apple iCloud** {% term integration %} allows you to detect presence using the [iCloud](https://www.icloud.com/) service. iCloud allows users to track their location on iOS devices.
 
 There is currently support for the following platforms within Home Assistant:
 
diff --git a/source/_integrations/itunes.markdown b/source/_integrations/itunes.markdown
index 692fe14f56c7..f0f085e2b3e0 100644
--- a/source/_integrations/itunes.markdown
+++ b/source/_integrations/itunes.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `itunes` media player {% term integration %} allows you to control [iTunes](https://apple.com/itunes/) from Home Assistant. It uses a 3rd party server that you run on your Mac called [itunes-api](https://github.com/maddox/itunes-api). Play, pause or skip songs remotely on iTunes running on your Mac.
+The **Apple iTunes** {% term integration %} allows you to control [iTunes](https://apple.com/itunes/) from Home Assistant. It uses a 3rd party server that you run on your Mac called [itunes-api](https://github.com/maddox/itunes-api). Play, pause or skip songs remotely on iTunes running on your Mac.
 
 In addition to controlling iTunes, your available AirPlay endpoints will be added as media players as well. You can then individually address them and turn them on, turn them off or adjust their volume.
 
diff --git a/source/_integrations/logbook.markdown b/source/_integrations/logbook.markdown
index d8254d433287..d582f8b1bba5 100644
--- a/source/_integrations/logbook.markdown
+++ b/source/_integrations/logbook.markdown
@@ -16,7 +16,7 @@ related:
 
 <img src='/images/screenshots/activity-panel.png' style='margin-left:10px; float: right;' height="100" />
 
-The activity {% term integration %} provides a different perspective on the history of your
+The **Activity** {% term integration %} provides a different perspective on the history of your
 house by showing all the changes that happened to your house in reverse
 chronological order. It depends on
 the [`recorder`](/integrations/recorder/) integration for storing the data. This means that if the
diff --git a/source/_integrations/recswitch.markdown b/source/_integrations/recswitch.markdown
index dce615cc767c..bc11b10d2733 100644
--- a/source/_integrations/recswitch.markdown
+++ b/source/_integrations/recswitch.markdown
@@ -15,7 +15,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-The `recswitch` switch {% term integration %} allows you to control the Ankuoo REC Switch devices.
+The **Ankuoo REC Switch** {% term integration %} allows you to control the Ankuoo REC Switch devices.
 
 Supported devices (tested):
 
diff --git a/source/_integrations/route53.markdown b/source/_integrations/route53.markdown
index a0db07794097..b7f35b270b6a 100644
--- a/source/_integrations/route53.markdown
+++ b/source/_integrations/route53.markdown
@@ -13,7 +13,7 @@ related:
 ha_quality_scale: legacy
 ---
 
-With the `route53` {% term integration %} can you keep your AWS Route53 DNS records up to date.
+With the **AWS Route53** {% term integration %} can you keep your AWS Route53 DNS records up to date.
 
 The integration will run every hour, but can also be started manually by using the `route53.update_records` action.