config.INI

acceleration = 0
bed_size = 130,130
bed_temperature = 0
bottom_layer_speed_ratio = 0.3
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
complete_objects = 0
cooling = 1
disable_fan_first_layers = 3
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off hot-end temperature\nM140 S0 ; turn off bed temperature\nG0 X120  ; Far right on X axis\nM84     ; disable motors\nM106 ; Enable the extruder fan to hasten cooldown.
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width_ratio = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 3
fill_angle = 45
fill_density = 0.4
fill_pattern = rectilinear
first_layer_bed_temperature = 0
first_layer_height_ratio = 1
first_layer_temperature = 230
g0 = 0
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 50
infill_every_layers = 1
infill_speed = 60
layer_gcode = 
layer_height = 0.4
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
notes = 
nozzle_diameter = 0.5
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 25
perimeter_speed = 15
perimeters = 3
post_process = 
print_center = 65,65
randomize_start = 1
retract_before_travel = 2
retract_length = 1
retract_lift = 0
retract_restart_extra = 0
retract_speed = 30
rotate = 0
scale = 1
skirt_distance = 5
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 60
small_perimeter_speed = 5
solid_fill_pattern = rectilinear
solid_infill_speed = 60
solid_layers = 3
start_gcode = G28 ; home all axes\nM208 X147 Y130 Z110 ; max travel - broken
support_material = 1
support_material_tool = 0
temperature = 230
threads = 2
travel_speed = 130
use_relative_e_distances = 0
z_offset = 0