Home

PJON is a tool created to simplify network engineering and communication between devices. Choose the medium you prefer, build your own network of devices and make it work with few lines of code. There are 13 strategies available to communicate data with PJON on various media:

Strategy	Physical layer	Protocol
SoftwareBitBang	Single Wire	PJDL
OverSampling	Radio	PJDLR
AnalogSampling	Light	PJDLS
ThroughSerial	Serial port	TSDL
ThroughLoRa	Radio	LoRa
EthernetTCP	Ethernet/WiFi	TCP
LocalUDP	Ethernet/WiFi	UDP
GlobalUDP	Ethernet/WiFi	UDP
DualUDP	Ethernet/WiFi	UDP
MQTTTranslate	Ethernet/WiFi	MQTT
ESPNOW	WiFi	ESPNOW
LocalFile	System memory	None
Any	Virtual inheritance, any of the above	Any

Compatibility

Device	AS	OS	SB	TS	ET	LU	GU	DU	TL	EN	LF
Arduino Duemilanove	✔️	✔️	✔️	✔️	✔️	✔️	✔️	✔️	✔️	❌	❌
Arduino Nano	✔️	✔️	✔️	✔️	✔️	✔️	✔️	✔️	✔️	❌	❌
Arduino Uno	✔️	✔️	✔️	✔️	✔️	✔️	✔️	✔️	✔️	❌	❌
Arduino Leonardo	❌	✔️	✔️	✔️	✔️	✔️	✔️	✔️	✔️	❌	❌
Arduino Micro	❌	✔️	✔️	✔️	✔️	✔️	✔️	✔️	✔️	❌	❌
Arduino Mega	✔️	✔️	✔️	✔️	✔️	✔️	✔️	✔️	✔️	❌	❌
Arduino Zero	❌	❌	✔️	✔️	❌	❌	❌	❌	❌	❌	❌
Arduino Due	❌	❌	❌	✔️	❌	❌	❌	❌	❌	❌	❌
ATMega1284P	❌	❌	✔️	✔️	❌	❌	❌	❌	❌	❌	❌
ATtiny84/84A	❌	❌	✔️	✔️	❌	❌	❌	❌	❌	❌	❌
ATtiny85	❌	❌	✔️	✔️	❌	❌	❌	❌	❌	❌	❌
ESP8266	❌	❌	✔️	✔️	❌	❌	✔️	✔️	❌	✔️	❌
ESP32	❌	❌	✔️	✔️	❌	✔️	✔️	✔️	❌	✔️	❌
STM32F103	❌	❌	✔️	✔️	❌	❌	❌	❌	✔️	❌	❌
Nucleo L053R8	❌	❌	❌	✔️	❌	❌	❌	❌	❌	❌	❌
Nucleo F401RE	❌	❌	❌	✔️	❌	❌	❌	❌	❌	❌	❌
Teensy 3.1	❌	❌	✔️	✔️	❌	❌	❌	❌	❌	❌	❌
Raspberry Pi	❌	❌	❌	✔️	✔️	✔️	✔️	✔️	❌	❌	✔️
Windows X86	❌	❌	❌	✔️	✔️	✔️	✔️	✔️	❌	❌	✔️
Linux	❌	❌	❌	✔️	✔️	✔️	✔️	✔️	❌	❌	✔️
Mac	❌	❌	❌	✔️	❌	✔️	✔️	❌	❌	❌	❌
Android	❌	❌	❌	❌	❌	✔️	❌	❌	❌	❌	❌

✔️ compatible - ❌ not compatible

Blink test

For a simple test you can use a couple of Arduino boards, connect together their ground and pin 12.

 Arduino UNO        Arduino UNO
  _________   wire   _________
 | ||   |_||___     |         |
 ||       ||   |    ||       ||
 ||       ||   |    ||       ||
 ||       ||   |____||       ||
 |_________|        |_|_|__||_|
                      

Flash on both arduinos the programs present in the BlinkTest directory. You should see the receiver device blinking every second.

If you want to know more and support the PJON project see the PJON protocol handbook and the PJON 12.0 big box.