From b0663905a656b4e3778abb781b0f68b472b7cdf0 Mon Sep 17 00:00:00 2001 From: "Eric D. Schabell" Date: Fri, 7 Nov 2025 10:49:33 -0500 Subject: [PATCH 01/10] Updated and fixed opentelemetry input plugin options configuration table. Fixes #2152. Signed-off-by: Eric D. Schabell --- pipeline/inputs/opentelemetry.md | 58 +++++++++++++++++++++++++------- 1 file changed, 46 insertions(+), 12 deletions(-) diff --git a/pipeline/inputs/opentelemetry.md b/pipeline/inputs/opentelemetry.md index 60163d9ee..816bc706a 100644 --- a/pipeline/inputs/opentelemetry.md +++ b/pipeline/inputs/opentelemetry.md @@ -10,18 +10,52 @@ Fluent Bit has a compliant implementation which fully supports `OTLP/HTTP` and ` ## Configuration -| Key | Description | Default | -|---|---|---| -| `listen` | The network address to listen on. | `0.0.0.0` | -| `port` | The port for Fluent Bit to listen for incoming connections. In Fluent Bit 3.0.2 or later, this port is used for both transport `OTLP/HTTP` and `OTLP/GRPC`. | `4318` | -| `tag` | Tag for all data ingested by this plugin. This will only be used if `tag_from_uri` is set to `false`. Otherwise, the tag will be created from the URI. | _none_ | -| `tag_key` | Specify the key name to overwrite a tag. If set, the tag will be overwritten by a value of the key. | _none_ | -| `raw_traces` | Route trace data as a log. | `false` | -| `buffer_max_size` | Specify the maximum buffer size in `KB`, `MB`, or `GB` to the HTTP payload. | `4M` | -| `buffer_chunk_size` | Initial size and allocation strategy to store the payload (advanced users only)` | `512K` | -| `successful_response_code` | Allows for setting a successful response code. Supported values: `200`, `201`, or `204`. | `201` | -| `tag_from_uri` | By default, the tag will be created from the URI. For example, `v1_metrics` from `/v1/metrics`. This must be set to false if using `tag`. | `true` | -| `threaded` | Indicates whether to run this input in its own [thread](../../administration/multithreading.md#inputs). | `false` | +| Key | Description | Default | +|-------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------| +| `alias` | Sets an alias, useful for multiple instances of the same input plugin. If no alias is specified, a default name will be assigned using the plugin name followed by a dot and a sequence number. | _none_ | +| `buffer_max_size` | Specify the maximum buffer size in `KB`, `MB`, or `GB` to the HTTP payload. | `4M` | +| `buffer_chunk_size` | Initial size and allocation strategy to store the payload (advanced users only). | `512K` | +| `encode_profiles_as_log` | Encode profiles received as text and ingest them in the logging pipeline. | `true` | +| `host` | The hostname. | `localhost` | +| `http2` | | `true` | +| `listen` | The network address to listen on. | `0.0.0.0` | +| `log_level` | Specifies the log level for output plugin. If not set here, plugin uses global log level in `service` section. | `info` | +| `log_supress_interval` | Suppresses log messages from output plugin that appear similar within a specified time interval. `0` no suppression. | `0` | +| `logs_body_key` | Specify a body key. | _none_ | +| `logs_metadata_key` | Specify a metadata key. | `otlp` | +| `mem_buf_limit` | Set a memory buffer limit for the input plugin. If the limit is reached, the plugin will pause until the buffer is drained. The value is in bytes. If set to 0, the buffer limit is disabled. | `0` | +| `net.accept_timeout` | Set maximum time allowed to establish an incoming connection, this time includes the TLS handshake. | `10s` | +| `net.accept_timeout_log_error` | On client accept timeout, specify if it should log an error. When disabled, the timeout is logged as a debug message. | `true` | +| `net.backlog` | Set the backlog size for listening sockets. | `128` | +| `net.io_timeout` | Set maximum time a connection can stay idle. | `0s` | +| `net.keepalive` | Enable or disable Keepalive support. | `true` | +| `net.share_port` | Allow multiple plugins to bind to the same port. | `false` | +| `port` | The port for Fluent Bit to listen for incoming connections. | `0` | +| `profiles_support` | This is an experimental feature, feel free to test it but please do not enable this in production environments. | `false` | +| `raw_traces` | Forward traces without processing. | `false` | +| `routable` | If set to `true`, the data generated by the plugin will be routable, meaning that it can be forwarded to other plugins or outputs. If set to `false`, the data will be discarded. | `true` | +| `storage.pause_on_chunks_overlimit` | Enable pausing on an input when they reach their chunks limit. | _none_ | +| `storage.type` | Sets the storage type for this input, one of: `filesystem`, `memory` or `memrb`. | `memory` | +| `successful_response_code` | Allows for setting a successful response code. Supported values: `200`, `201`, or `204`. | `201` | +| `tag` | Set a tag for the events generated by this input plugin. | _none_ | +| `tag_from_uri` | By default, the tag will be created from the URI. For example, `v1_metrics` from `/v1/metrics`. This must be set to false if using `tag`. | `true` | +| `tag_key` | Specify the key name to overwrite a tag. If set, the tag will be overwritten by a value of the key. | _none_ | +| `threaded` | Enable threading on an input. | `false` | +| `thread.ring_buffer.capacity` | Set custom ring buffer capacity when the input runs in threaded mode. | `1024` | +| `thread.ring_buffer.window` | Set custom ring buffer window percentage for threaded inputs. | `5` | +| `tls` | Enable or disable TLS/SSL support. | `off` | +| `tls.ca_file` | Absolute path to CA certificate file. | _none_ | +| `tls.ca_path` | Absolute path to scan for certificate files. | _none_ | +| `tls.cert_file` | Absolute path to Certificate file. | _none_ | +| `tls.ciphers` | Specify TLS ciphers up to TLSv1.2. | _none_ | +| `tls.debug` | Set TLS debug level. Accepts `0` (No debug), `1`(Error), `2` (State change), `3` (Informational) and `4` (Verbose). | `1` | +| `tls.key_file` | Absolute path to private Key file. | _none_ | +| `tls.key_passwd` | Optional password for tls.key_file file. | _none_ | +| `tls.max_version` | Specify the maximum version of TLS. | _none_ | +| `tls.min_version` | Specify the minimum version of TLS. | _none_ | +| `tls.verify` | Force certificate validation. | `on` | +| `tls.verify_hostname` | Enable or disable to verify hostname. | `off` | +| `tls.vhost` | Hostname to be used for TLS SNI extension. | _none_ | Raw traces means that any data forwarded to the traces endpoint (`/v1/traces`) will be packed and forwarded as a log message, and won't be processed by Fluent Bit. The traces endpoint by default expects a valid `protobuf` encoded payload, but you can set the `raw_traces` option in case you want to get trace telemetry data to any of the Fluent Bit supported outputs. From 1ece961016f87ffe79251a7af2fc5a66e3be78e2 Mon Sep 17 00:00:00 2001 From: "Eric D. Schabell" Date: Fri, 7 Nov 2025 10:52:09 -0500 Subject: [PATCH 02/10] Fixed linting issue on options description. Signed-off-by: Eric D. Schabell --- pipeline/inputs/opentelemetry.md | 92 ++++++++++++++++---------------- 1 file changed, 46 insertions(+), 46 deletions(-) diff --git a/pipeline/inputs/opentelemetry.md b/pipeline/inputs/opentelemetry.md index 816bc706a..f034ab776 100644 --- a/pipeline/inputs/opentelemetry.md +++ b/pipeline/inputs/opentelemetry.md @@ -10,52 +10,52 @@ Fluent Bit has a compliant implementation which fully supports `OTLP/HTTP` and ` ## Configuration -| Key | Description | Default | -|-------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------| -| `alias` | Sets an alias, useful for multiple instances of the same input plugin. If no alias is specified, a default name will be assigned using the plugin name followed by a dot and a sequence number. | _none_ | -| `buffer_max_size` | Specify the maximum buffer size in `KB`, `MB`, or `GB` to the HTTP payload. | `4M` | -| `buffer_chunk_size` | Initial size and allocation strategy to store the payload (advanced users only). | `512K` | -| `encode_profiles_as_log` | Encode profiles received as text and ingest them in the logging pipeline. | `true` | -| `host` | The hostname. | `localhost` | -| `http2` | | `true` | -| `listen` | The network address to listen on. | `0.0.0.0` | -| `log_level` | Specifies the log level for output plugin. If not set here, plugin uses global log level in `service` section. | `info` | -| `log_supress_interval` | Suppresses log messages from output plugin that appear similar within a specified time interval. `0` no suppression. | `0` | -| `logs_body_key` | Specify a body key. | _none_ | -| `logs_metadata_key` | Specify a metadata key. | `otlp` | -| `mem_buf_limit` | Set a memory buffer limit for the input plugin. If the limit is reached, the plugin will pause until the buffer is drained. The value is in bytes. If set to 0, the buffer limit is disabled. | `0` | -| `net.accept_timeout` | Set maximum time allowed to establish an incoming connection, this time includes the TLS handshake. | `10s` | -| `net.accept_timeout_log_error` | On client accept timeout, specify if it should log an error. When disabled, the timeout is logged as a debug message. | `true` | -| `net.backlog` | Set the backlog size for listening sockets. | `128` | -| `net.io_timeout` | Set maximum time a connection can stay idle. | `0s` | -| `net.keepalive` | Enable or disable Keepalive support. | `true` | -| `net.share_port` | Allow multiple plugins to bind to the same port. | `false` | -| `port` | The port for Fluent Bit to listen for incoming connections. | `0` | -| `profiles_support` | This is an experimental feature, feel free to test it but please do not enable this in production environments. | `false` | -| `raw_traces` | Forward traces without processing. | `false` | -| `routable` | If set to `true`, the data generated by the plugin will be routable, meaning that it can be forwarded to other plugins or outputs. If set to `false`, the data will be discarded. | `true` | -| `storage.pause_on_chunks_overlimit` | Enable pausing on an input when they reach their chunks limit. | _none_ | -| `storage.type` | Sets the storage type for this input, one of: `filesystem`, `memory` or `memrb`. | `memory` | -| `successful_response_code` | Allows for setting a successful response code. Supported values: `200`, `201`, or `204`. | `201` | -| `tag` | Set a tag for the events generated by this input plugin. | _none_ | -| `tag_from_uri` | By default, the tag will be created from the URI. For example, `v1_metrics` from `/v1/metrics`. This must be set to false if using `tag`. | `true` | -| `tag_key` | Specify the key name to overwrite a tag. If set, the tag will be overwritten by a value of the key. | _none_ | -| `threaded` | Enable threading on an input. | `false` | -| `thread.ring_buffer.capacity` | Set custom ring buffer capacity when the input runs in threaded mode. | `1024` | -| `thread.ring_buffer.window` | Set custom ring buffer window percentage for threaded inputs. | `5` | -| `tls` | Enable or disable TLS/SSL support. | `off` | -| `tls.ca_file` | Absolute path to CA certificate file. | _none_ | -| `tls.ca_path` | Absolute path to scan for certificate files. | _none_ | -| `tls.cert_file` | Absolute path to Certificate file. | _none_ | -| `tls.ciphers` | Specify TLS ciphers up to TLSv1.2. | _none_ | -| `tls.debug` | Set TLS debug level. Accepts `0` (No debug), `1`(Error), `2` (State change), `3` (Informational) and `4` (Verbose). | `1` | -| `tls.key_file` | Absolute path to private Key file. | _none_ | -| `tls.key_passwd` | Optional password for tls.key_file file. | _none_ | -| `tls.max_version` | Specify the maximum version of TLS. | _none_ | -| `tls.min_version` | Specify the minimum version of TLS. | _none_ | -| `tls.verify` | Force certificate validation. | `on` | -| `tls.verify_hostname` | Enable or disable to verify hostname. | `off` | -| `tls.vhost` | Hostname to be used for TLS SNI extension. | _none_ | +| Key | Description | Default | +|-------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------| +| `alias` | Sets an alias for multiple instances of the same input plugin. If no alias is specified, a default name will be assigned using the plugin name followed by a dot and a sequence number. | _none_ | +| `buffer_max_size` | Specify the maximum buffer size in `KB`, `MB`, or `GB` to the HTTP payload. | `4M` | +| `buffer_chunk_size` | Initial size and allocation strategy to store the payload (advanced users only). | `512K` | +| `encode_profiles_as_log` | Encode profiles received as text and ingest them in the logging pipeline. | `true` | +| `host` | The hostname. | `localhost` | +| `http2` | | `true` | +| `listen` | The network address to listen on. | `0.0.0.0` | +| `log_level` | Specifies the log level for output plugin. If not set here, plugin uses global log level in `service` section. | `info` | +| `log_supress_interval` | Suppresses log messages from output plugin that appear similar within a specified time interval. `0` no suppression. | `0` | +| `logs_body_key` | Specify a body key. | _none_ | +| `logs_metadata_key` | Specify a metadata key. | `otlp` | +| `mem_buf_limit` | Set a memory buffer limit for the input plugin. If the limit is reached, the plugin will pause until the buffer is drained. The value is in bytes. If set to 0, the buffer limit is disabled. | `0` | +| `net.accept_timeout` | Set maximum time allowed to establish an incoming connection, this time includes the TLS handshake. | `10s` | +| `net.accept_timeout_log_error` | On client accept timeout, specify if it should log an error. When disabled, the timeout is logged as a debug message. | `true` | +| `net.backlog` | Set the backlog size for listening sockets. | `128` | +| `net.io_timeout` | Set maximum time a connection can stay idle. | `0s` | +| `net.keepalive` | Enable or disable Keepalive support. | `true` | +| `net.share_port` | Allow multiple plugins to bind to the same port. | `false` | +| `port` | The port for Fluent Bit to listen for incoming connections. | `0` | +| `profiles_support` | This is an experimental feature, feel free to test it but please do not enable this in production environments. | `false` | +| `raw_traces` | Forward traces without processing. | `false` | +| `routable` | If set to `true`, the data generated by the plugin will be routable, meaning that it can be forwarded to other plugins or outputs. If set to `false`, the data will be discarded. | `true` | +| `storage.pause_on_chunks_overlimit` | Enable pausing on an input when they reach their chunks limit. | _none_ | +| `storage.type` | Sets the storage type for this input, one of: `filesystem`, `memory` or `memrb`. | `memory` | +| `successful_response_code` | Allows for setting a successful response code. Supported values: `200`, `201`, or `204`. | `201` | +| `tag` | Set a tag for the events generated by this input plugin. | _none_ | +| `tag_from_uri` | By default, the tag will be created from the URI. For example, `v1_metrics` from `/v1/metrics`. This must be set to false if using `tag`. | `true` | +| `tag_key` | Specify the key name to overwrite a tag. If set, the tag will be overwritten by a value of the key. | _none_ | +| `threaded` | Enable threading on an input. | `false` | +| `thread.ring_buffer.capacity` | Set custom ring buffer capacity when the input runs in threaded mode. | `1024` | +| `thread.ring_buffer.window` | Set custom ring buffer window percentage for threaded inputs. | `5` | +| `tls` | Enable or disable TLS/SSL support. | `off` | +| `tls.ca_file` | Absolute path to CA certificate file. | _none_ | +| `tls.ca_path` | Absolute path to scan for certificate files. | _none_ | +| `tls.cert_file` | Absolute path to Certificate file. | _none_ | +| `tls.ciphers` | Specify TLS ciphers up to TLSv1.2. | _none_ | +| `tls.debug` | Set TLS debug level. Accepts `0` (No debug), `1`(Error), `2` (State change), `3` (Informational) and `4` (Verbose). | `1` | +| `tls.key_file` | Absolute path to private Key file. | _none_ | +| `tls.key_passwd` | Optional password for tls.key_file file. | _none_ | +| `tls.max_version` | Specify the maximum version of TLS. | _none_ | +| `tls.min_version` | Specify the minimum version of TLS. | _none_ | +| `tls.verify` | Force certificate validation. | `on` | +| `tls.verify_hostname` | Enable or disable to verify hostname. | `off` | +| `tls.vhost` | Hostname to be used for TLS SNI extension. | _none_ | Raw traces means that any data forwarded to the traces endpoint (`/v1/traces`) will be packed and forwarded as a log message, and won't be processed by Fluent Bit. The traces endpoint by default expects a valid `protobuf` encoded payload, but you can set the `raw_traces` option in case you want to get trace telemetry data to any of the Fluent Bit supported outputs. From 400b54f8f9f5d3cd0d1e8707c8a285c37adf38ec Mon Sep 17 00:00:00 2001 From: "Eric D. Schabell" Date: Fri, 7 Nov 2025 10:53:36 -0500 Subject: [PATCH 03/10] Fixed linting issue on options description. Signed-off-by: Eric D. Schabell --- pipeline/inputs/opentelemetry.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/pipeline/inputs/opentelemetry.md b/pipeline/inputs/opentelemetry.md index f034ab776..1ea407711 100644 --- a/pipeline/inputs/opentelemetry.md +++ b/pipeline/inputs/opentelemetry.md @@ -31,7 +31,7 @@ Fluent Bit has a compliant implementation which fully supports `OTLP/HTTP` and ` | `net.keepalive` | Enable or disable Keepalive support. | `true` | | `net.share_port` | Allow multiple plugins to bind to the same port. | `false` | | `port` | The port for Fluent Bit to listen for incoming connections. | `0` | -| `profiles_support` | This is an experimental feature, feel free to test it but please do not enable this in production environments. | `false` | +| `profiles_support` | This is an experimental feature, feel free to test it but please don't enable this in production environments. | `false` | | `raw_traces` | Forward traces without processing. | `false` | | `routable` | If set to `true`, the data generated by the plugin will be routable, meaning that it can be forwarded to other plugins or outputs. If set to `false`, the data will be discarded. | `true` | | `storage.pause_on_chunks_overlimit` | Enable pausing on an input when they reach their chunks limit. | _none_ | From f3826409b8f0251e798c6b1bb527701b120e9479 Mon Sep 17 00:00:00 2001 From: "Eric D. Schabell" Date: Fri, 7 Nov 2025 10:55:36 -0500 Subject: [PATCH 04/10] Fixed more linting issue on options description. Signed-off-by: Eric D. Schabell --- pipeline/inputs/opentelemetry.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/pipeline/inputs/opentelemetry.md b/pipeline/inputs/opentelemetry.md index 1ea407711..83a96f19a 100644 --- a/pipeline/inputs/opentelemetry.md +++ b/pipeline/inputs/opentelemetry.md @@ -31,7 +31,7 @@ Fluent Bit has a compliant implementation which fully supports `OTLP/HTTP` and ` | `net.keepalive` | Enable or disable Keepalive support. | `true` | | `net.share_port` | Allow multiple plugins to bind to the same port. | `false` | | `port` | The port for Fluent Bit to listen for incoming connections. | `0` | -| `profiles_support` | This is an experimental feature, feel free to test it but please don't enable this in production environments. | `false` | +| `profiles_support` | This is an experimental feature, feel free to test it but don't enable this in production environments. | `false` | | `raw_traces` | Forward traces without processing. | `false` | | `routable` | If set to `true`, the data generated by the plugin will be routable, meaning that it can be forwarded to other plugins or outputs. If set to `false`, the data will be discarded. | `true` | | `storage.pause_on_chunks_overlimit` | Enable pausing on an input when they reach their chunks limit. | _none_ | From 74f17718354e05ba6772438bd4db406daf0600ad Mon Sep 17 00:00:00 2001 From: "Eric D. Schabell" Date: Sun, 9 Nov 2025 17:04:51 +0100 Subject: [PATCH 05/10] Update pipeline/inputs/opentelemetry.md Applying review suggestion. Co-authored-by: Alexa Kreizinger Signed-off-by: Eric D. Schabell --- pipeline/inputs/opentelemetry.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/pipeline/inputs/opentelemetry.md b/pipeline/inputs/opentelemetry.md index 83a96f19a..ecec9b12f 100644 --- a/pipeline/inputs/opentelemetry.md +++ b/pipeline/inputs/opentelemetry.md @@ -20,7 +20,7 @@ Fluent Bit has a compliant implementation which fully supports `OTLP/HTTP` and ` | `http2` | | `true` | | `listen` | The network address to listen on. | `0.0.0.0` | | `log_level` | Specifies the log level for output plugin. If not set here, plugin uses global log level in `service` section. | `info` | -| `log_supress_interval` | Suppresses log messages from output plugin that appear similar within a specified time interval. `0` no suppression. | `0` | +| `log_supress_interval` | Suppresses log messages from this plugin that appear similar within a specified time interval. `0` no suppression. | `0` | | `logs_body_key` | Specify a body key. | _none_ | | `logs_metadata_key` | Specify a metadata key. | `otlp` | | `mem_buf_limit` | Set a memory buffer limit for the input plugin. If the limit is reached, the plugin will pause until the buffer is drained. The value is in bytes. If set to 0, the buffer limit is disabled. | `0` | From 080ca5df457b8c17739b4458c2022c2cf8fca38e Mon Sep 17 00:00:00 2001 From: "Eric D. Schabell" Date: Sun, 9 Nov 2025 17:05:30 +0100 Subject: [PATCH 06/10] Update pipeline/inputs/opentelemetry.md Applying review suggestion. Co-authored-by: Alexa Kreizinger Signed-off-by: Eric D. Schabell --- pipeline/inputs/opentelemetry.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/pipeline/inputs/opentelemetry.md b/pipeline/inputs/opentelemetry.md index ecec9b12f..95bbce63e 100644 --- a/pipeline/inputs/opentelemetry.md +++ b/pipeline/inputs/opentelemetry.md @@ -19,7 +19,7 @@ Fluent Bit has a compliant implementation which fully supports `OTLP/HTTP` and ` | `host` | The hostname. | `localhost` | | `http2` | | `true` | | `listen` | The network address to listen on. | `0.0.0.0` | -| `log_level` | Specifies the log level for output plugin. If not set here, plugin uses global log level in `service` section. | `info` | +| `log_level` | Specifies the log level for this plugin. If not set here, the plugin uses the global log level specified in the `service` section of your configuration file. | `info` | | `log_supress_interval` | Suppresses log messages from this plugin that appear similar within a specified time interval. `0` no suppression. | `0` | | `logs_body_key` | Specify a body key. | _none_ | | `logs_metadata_key` | Specify a metadata key. | `otlp` | From a36d86f093b07ca76e6b4629b57a6cc8a76425a0 Mon Sep 17 00:00:00 2001 From: "Eric D. Schabell" Date: Sun, 9 Nov 2025 17:06:02 +0100 Subject: [PATCH 07/10] Update pipeline/inputs/opentelemetry.md Applying review suggestion. Co-authored-by: Alexa Kreizinger Signed-off-by: Eric D. Schabell --- pipeline/inputs/opentelemetry.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/pipeline/inputs/opentelemetry.md b/pipeline/inputs/opentelemetry.md index 95bbce63e..f225a8e28 100644 --- a/pipeline/inputs/opentelemetry.md +++ b/pipeline/inputs/opentelemetry.md @@ -24,7 +24,7 @@ Fluent Bit has a compliant implementation which fully supports `OTLP/HTTP` and ` | `logs_body_key` | Specify a body key. | _none_ | | `logs_metadata_key` | Specify a metadata key. | `otlp` | | `mem_buf_limit` | Set a memory buffer limit for the input plugin. If the limit is reached, the plugin will pause until the buffer is drained. The value is in bytes. If set to 0, the buffer limit is disabled. | `0` | -| `net.accept_timeout` | Set maximum time allowed to establish an incoming connection, this time includes the TLS handshake. | `10s` | +| `net.accept_timeout` | Set maximum time allowed to establish an incoming connection. This time includes the TLS handshake. | `10s` | | `net.accept_timeout_log_error` | On client accept timeout, specify if it should log an error. When disabled, the timeout is logged as a debug message. | `true` | | `net.backlog` | Set the backlog size for listening sockets. | `128` | | `net.io_timeout` | Set maximum time a connection can stay idle. | `0s` | From 28f6ba49e23e3be4043269294c5ddcd254f5146b Mon Sep 17 00:00:00 2001 From: "Eric D. Schabell" Date: Sun, 9 Nov 2025 17:06:20 +0100 Subject: [PATCH 08/10] Update pipeline/inputs/opentelemetry.md Applying review suggestion. Co-authored-by: Alexa Kreizinger Signed-off-by: Eric D. Schabell --- pipeline/inputs/opentelemetry.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/pipeline/inputs/opentelemetry.md b/pipeline/inputs/opentelemetry.md index f225a8e28..0f57e6559 100644 --- a/pipeline/inputs/opentelemetry.md +++ b/pipeline/inputs/opentelemetry.md @@ -28,7 +28,7 @@ Fluent Bit has a compliant implementation which fully supports `OTLP/HTTP` and ` | `net.accept_timeout_log_error` | On client accept timeout, specify if it should log an error. When disabled, the timeout is logged as a debug message. | `true` | | `net.backlog` | Set the backlog size for listening sockets. | `128` | | `net.io_timeout` | Set maximum time a connection can stay idle. | `0s` | -| `net.keepalive` | Enable or disable Keepalive support. | `true` | +| `net.keepalive` | Enable or disable keepalive support. | `true` | | `net.share_port` | Allow multiple plugins to bind to the same port. | `false` | | `port` | The port for Fluent Bit to listen for incoming connections. | `0` | | `profiles_support` | This is an experimental feature, feel free to test it but don't enable this in production environments. | `false` | From 7500238f49460994a60d13ffc2d4ae13edc86d16 Mon Sep 17 00:00:00 2001 From: "Eric D. Schabell" Date: Sun, 9 Nov 2025 17:06:44 +0100 Subject: [PATCH 09/10] Update pipeline/inputs/opentelemetry.md Applying review suggestion. Co-authored-by: Alexa Kreizinger Signed-off-by: Eric D. Schabell --- pipeline/inputs/opentelemetry.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/pipeline/inputs/opentelemetry.md b/pipeline/inputs/opentelemetry.md index 0f57e6559..f87687d12 100644 --- a/pipeline/inputs/opentelemetry.md +++ b/pipeline/inputs/opentelemetry.md @@ -33,7 +33,7 @@ Fluent Bit has a compliant implementation which fully supports `OTLP/HTTP` and ` | `port` | The port for Fluent Bit to listen for incoming connections. | `0` | | `profiles_support` | This is an experimental feature, feel free to test it but don't enable this in production environments. | `false` | | `raw_traces` | Forward traces without processing. | `false` | -| `routable` | If set to `true`, the data generated by the plugin will be routable, meaning that it can be forwarded to other plugins or outputs. If set to `false`, the data will be discarded. | `true` | +| `routable` | If set to `true`, the data generated by the plugin will be routable, meaning that it can be forwarded to other plugins or outputs. If set to `false`, the data will be discarded. | `true` | | `storage.pause_on_chunks_overlimit` | Enable pausing on an input when they reach their chunks limit. | _none_ | | `storage.type` | Sets the storage type for this input, one of: `filesystem`, `memory` or `memrb`. | `memory` | | `successful_response_code` | Allows for setting a successful response code. Supported values: `200`, `201`, or `204`. | `201` | From ec01d7de1fe729d92b8b0bfaa3333735286ea05f Mon Sep 17 00:00:00 2001 From: "Eric D. Schabell" Date: Sun, 9 Nov 2025 11:17:26 -0500 Subject: [PATCH 10/10] CodeRabbitAI findings applied to opentelemetry input plugin docs update. Signed-off-by: Eric D. Schabell --- pipeline/inputs/opentelemetry.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/pipeline/inputs/opentelemetry.md b/pipeline/inputs/opentelemetry.md index f87687d12..0fbb9b584 100644 --- a/pipeline/inputs/opentelemetry.md +++ b/pipeline/inputs/opentelemetry.md @@ -17,10 +17,10 @@ Fluent Bit has a compliant implementation which fully supports `OTLP/HTTP` and ` | `buffer_chunk_size` | Initial size and allocation strategy to store the payload (advanced users only). | `512K` | | `encode_profiles_as_log` | Encode profiles received as text and ingest them in the logging pipeline. | `true` | | `host` | The hostname. | `localhost` | -| `http2` | | `true` | +| `http2` | Enable or disable HTTP/2 support. | `true` | | `listen` | The network address to listen on. | `0.0.0.0` | -| `log_level` | Specifies the log level for this plugin. If not set here, the plugin uses the global log level specified in the `service` section of your configuration file. | `info` | -| `log_supress_interval` | Suppresses log messages from this plugin that appear similar within a specified time interval. `0` no suppression. | `0` | +| `log_level` | Specifies the log level for this plugin. If not set here, the plugin uses the global log level specified in the `service` section of your configuration file. | `info` | +| `log_supress_interval` | Suppresses log messages from this plugin that appear similar within a specified time interval. `0` no suppression. | `0` | | `logs_body_key` | Specify a body key. | _none_ | | `logs_metadata_key` | Specify a metadata key. | `otlp` | | `mem_buf_limit` | Set a memory buffer limit for the input plugin. If the limit is reached, the plugin will pause until the buffer is drained. The value is in bytes. If set to 0, the buffer limit is disabled. | `0` | @@ -30,10 +30,10 @@ Fluent Bit has a compliant implementation which fully supports `OTLP/HTTP` and ` | `net.io_timeout` | Set maximum time a connection can stay idle. | `0s` | | `net.keepalive` | Enable or disable keepalive support. | `true` | | `net.share_port` | Allow multiple plugins to bind to the same port. | `false` | -| `port` | The port for Fluent Bit to listen for incoming connections. | `0` | +| `port` | The port for Fluent Bit to listen for incoming connections. | `4318` | | `profiles_support` | This is an experimental feature, feel free to test it but don't enable this in production environments. | `false` | | `raw_traces` | Forward traces without processing. | `false` | -| `routable` | If set to `true`, the data generated by the plugin will be routable, meaning that it can be forwarded to other plugins or outputs. If set to `false`, the data will be discarded. | `true` | +| `routable` | If set to `true`, the data generated by the plugin will be routable, meaning that it can be forwarded to other plugins or outputs. If set to `false`, the data will be discarded. | `true` | | `storage.pause_on_chunks_overlimit` | Enable pausing on an input when they reach their chunks limit. | _none_ | | `storage.type` | Sets the storage type for this input, one of: `filesystem`, `memory` or `memrb`. | `memory` | | `successful_response_code` | Allows for setting a successful response code. Supported values: `200`, `201`, or `204`. | `201` |