-
Notifications
You must be signed in to change notification settings - Fork 3
/
Copy pathdraft-ietf-v6ops-ipv6-ehs-packet-drops-01.txt
1176 lines (809 loc) · 47.1 KB
/
draft-ietf-v6ops-ipv6-ehs-packet-drops-01.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
IPv6 Operations Working Group (v6ops) F. Gont
Internet-Draft SI6 Networks
Intended status: Informational N. Hilliard
Expires: March 31, 2021 INEX
G. Doering
SpaceNet AG
W. Kumari
Google
G. Huston
APNIC
W. Liu
Huawei Technologies
September 27, 2020
Operational Implications of IPv6 Packets with Extension Headers
draft-ietf-v6ops-ipv6-ehs-packet-drops-01
Abstract
This document summarizes the operational implications of IPv6
extension headers, and attempts to analyze reasons why packets with
IPv6 extension headers may be dropped in the public Internet.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on March 31, 2021.
Copyright Notice
Copyright (c) 2020 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
Gont, et al. Expires March 31, 2021 [Page 1]
Internet-Draft IPv6 Extension Headers September 2020
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Background Information . . . . . . . . . . . . . . . . . . . 3
4. Previous Work on IPv6 Extension Headers . . . . . . . . . . . 6
5. Packet Forwarding Engine Constraints . . . . . . . . . . . . 8
5.1. Recirculation . . . . . . . . . . . . . . . . . . . . . . 9
6. Requirement to Process Layer-3/layer-4 information in
Intermediate Systems . . . . . . . . . . . . . . . . . . . . 9
6.1. ECMP and Hash-based Load-Sharing . . . . . . . . . . . . 9
6.2. Enforcing infrastructure ACLs . . . . . . . . . . . . . . 10
6.3. DDoS Management and Customer Requests for Filtering . . . 10
6.4. Network Intrusion Detection and Prevention . . . . . . . 11
6.5. Firewalling . . . . . . . . . . . . . . . . . . . . . . . 11
7. Operational Implications . . . . . . . . . . . . . . . . . . 12
7.1. Inability to Find Layer-4 Information . . . . . . . . . . 12
7.2. Route-Processor Protection . . . . . . . . . . . . . . . 12
7.3. Inability to Perform Fine-grained Filtering . . . . . . . 13
7.4. Security Concerns Associated with IPv6 Extension Headers 13
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 14
9. Security Considerations . . . . . . . . . . . . . . . . . . . 14
10. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 14
11. References . . . . . . . . . . . . . . . . . . . . . . . . . 15
11.1. Normative References . . . . . . . . . . . . . . . . . . 15
11.2. Informative References . . . . . . . . . . . . . . . . . 16
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 20
1. Introduction
IPv6 Extension Headers (EHs) allow for the extension of the IPv6
protocol, and provide support for core functionality such as IPv6
fragmentation. However, common implementation limitations suggest
that EHs present a challenge for IPv6 packet routing equipment and
middle-boxes, and evidence exists that IPv6 packets with EHs may be
intentionally dropped in the public Internet in some network
deployments.
The authors of this document have been involved in numerous
discussions about IPv6 extension headers (both within the IETF and in
Gont, et al. Expires March 31, 2021 [Page 2]
Internet-Draft IPv6 Extension Headers September 2020
other fora), and have noticed that the security and operational
implications associated with IPv6 EHs were unknown to the larger
audience participating in these discussions.
This document has the following goals:
o Raise awareness about the operational and security implications of
IPv6 Extension Headers, and presents reasons why some networks may
intentionally drop packets containing IPv6 Extension Headers.
o Highlight areas where current IPv6 support by networking devices
maybe sub-optimal, such that the aforementioned support is
improved.
o Highlight operational issues associated with IPv6 extension
headers, such that those issues are considered in IETF
standardization efforts.
Section 4 of this document summarizes the previous work that has been
carried out in the area of IPv6 extension headers. Section 5
discusses packet forwarding engine constraints in contemporary
routers. Section 6 discusses why contemporary routers and middle-
boxes may need to access Layer-4 information to make a forwarding
decision. Finally, Section 7 discusses the operational implications
of IPv6 EHs.
2. Disclaimer
This document analyzes the operational challenges represented by
packets that employ IPv6 Extension Headers, and documents some of the
operational reasons why these packets may be dropped in the public
Internet. This document is not a recommendation to drop such
packets, but rather an analysis of why they are dropped.
3. Background Information
It is useful to compare the basic structure of IPv6 packets against
that of IPv4 packets, and analyze the implications of the two
different packet structures.
IPv4 packets have a variable-length header size, that allows for the
use of IPv4 "options" -- optional information that may be of use by
nodes processing IPv4 packets. The IPv4 header length is specified
in the IHL header field of the mandatory IPv4 header, and must be in
the range from 20 octets (the minimum IPv4 header size) to 60 octets
(accommodating at most 40 octets of options).
Gont, et al. Expires March 31, 2021 [Page 3]
Internet-Draft IPv6 Extension Headers September 2020
Protocol, IHL
---------+
| |
| v
+------//-----+------------------------+
| | |
| IPv4 | Upper-Layer |
| Header | Protocol |
| | |
+-----//------+------------------------+
variable length
<------------->
Figure 1: IPv4 Packet Structure
There are a number of properties associated with this packet
structure:
o Firstly, since the header length is specified via the 4-bit IHL
field in units of 32-bit words, the maximum header length is 60
octets, and therefore there is an implicit limit on the maximum
number of options that any packet can carry.
o Secondly, since the header length is specified in the mandatory
IPv4 header, it is trivial to find the upper-layer protocol: the
header of the upper-layer protocol is simply "internet header
length" octets from the beginning of the IPv4 packet.
Furthermore, since there is an implicit limit on the maximum IPv4
header size, there is an implicit limit regarding "how deep into
the packet" the upper layer may be.
o Thirdly, the upper-layer protocol type is specified via the
"Protocol" field of the mandatory IPv4 header, and hence it is
readily available by any system that can process the mandatory
IPv4 header.
o Fourthly, all IP options are included in the same option
container. This means that any system (whether host or router)
willing to employ IP options must parse the entire option
"container", looking for any interesting options. For example,
routers may need to parse and skip options that are meant for the
destination host(s) as opposed to intermediate routers.
IPv6 took a different approach for the IPv6 packet structure. Rather
than employing variable-length header as IPv4, IPv6 employs a linked-
list-like packet structure, where a mandatory fixed-length IPv6
header is followed by an arbitrary number of optional extension
Gont, et al. Expires March 31, 2021 [Page 4]
Internet-Draft IPv6 Extension Headers September 2020
headers, with the upper-layer header being the last header in the
IPv6 header chain.
NH NH, EH-length NH, EH-length
+-------+ +------+ +-------+
| | | | | |
| v | v | v
+-------------+-------------+-//-+---------------+--------------+
| | | | | |
| IPv6 | Ext. | | Ext. | Upper-Layer |
| header | Header | | Header | Protocol |
| | | | | |
+-------------+-------------+-//-+---------------+--------------+
fixed length variable number of EHs & length
<------------> <-------------------------------->
Figure 2: IPv6 Packet Structure
The mandatory IPv6 header contains a "Next Header" (NH) field, which
specifies the "next header" type that follows in the IPv6 header
chain (or "no header" if the IPv6 packet has no upper-layer header).
The next header may be an IPv6 extension header or an upper-layer
protocol, with both extension headers and upper-layer protocols
sharing the same protocol number registry. A special "no header"
type may always terminate the IPv6 header chain when the packet
contains no further extension headers or upper-layer protocol. Each
extension header typically specifies its length (unless it is
implicit from the extension header type), and the "next header" type
that follows in the IPv6 IPv6 header chain.
This packet structure results in the following characteristics:
o In principle, since options are conveyed in different option
containers (i.e., different extension header types), options can
be separated on the basis of the systems that should process them.
For example, options that should be processed only by the
destination node(s) may be include in a "Destination Options"
extension header, whereas options that are meant to be processed
by all nodes processing the packet may be conveyed in a "Hop-by-
Hop Options" extension header. This may relieve e.g. routers from
having to process options that are only meant for the destination
node(s).
o [RFC2460] originally allowed IPv6 packets to contain an
arbitrarily large number of options that was only limited by the
"Payload Length" field of the original (un-fragmented) IPv6 packet
- allowing the IPv6 header chain to be fragmented among multiple
Gont, et al. Expires March 31, 2021 [Page 5]
Internet-Draft IPv6 Extension Headers September 2020
packets (see [RFC7112]). However, the current IPv6 standard
([RFC8200]), requires the entire IPv6 header chain to be contained
in the first fragment of a packet, and thus essentially limiting
the IPv6 extension header chain to the Path-MTU size.
o There is no upper-limit regarding "how deep into the IPv6 packet"
the upper-layer may be found. For example, the upper-layer header
may be contained at the end of a Path-MTU-sized packet.
o The mandatory IPv6 header specifies neither the upper-layer
protocol type nor the offset within the IPv6 packet where the
upper-layer header can be found (if at all present). This means
that the only way for a node to obtain the upper-layer protocol
type or find the upper-layer protocol header is to parse and
process the entire IPv6 header chain, in sequence, starting from
the mandatory IPv6 header, until the last header in the IPv6
header chain is found.
4. Previous Work on IPv6 Extension Headers
Some of the operational implications of IPv6 Extension Headers have
been discussed in IETF circles:
o [I-D.taylor-v6ops-fragdrop] discusses a rationale for which
operators drop IPv6 fragments.
o [I-D.wkumari-long-headers] discusses possible issues arising from
"long" IPv6 header chains.
o [I-D.kampanakis-6man-ipv6-eh-parsing] describes how
inconsistencies in the way IPv6 packets with extension headers are
parsed by different implementations may result in evasion of
security controls, and presents guidelines for parsing IPv6
extension headers with the goal of providing a common and
consistent parsing methodology for IPv6 implementations.
o [I-D.ietf-opsec-ipv6-eh-filtering] analyzes the security
implications of IPv6 EHs, and the operational implications of
dropping packets that employ IPv6 EHs and associated options.
o [RFC7113] discusses how some popular RA-Guard implementations are
subject to evasion by means of IPv6 extension headers.
o [RFC8900] analyzes the fragility introduced by IP fragmentation.
A number of recent RFCs have discussed issues related to IPv6
extension headers, specifying updates to a previous revision of the
IPv6 standard ([RFC2460]), many of which have now been incorporated
Gont, et al. Expires March 31, 2021 [Page 6]
Internet-Draft IPv6 Extension Headers September 2020
into the current IPv6 core standard ([RFC8200]) or the IPv6 Node
Requirements ([RFC8504]). Namely,
o [RFC5095] discusses the security implications of Routing Header
Type 0 (RTH0), and deprecates it.
o [RFC5722] analyzes the security implications of overlapping
fragments, and provides recommendations in this area.
o [RFC7045] clarifies how intermediate nodes should deal with IPv6
extension headers.
o [RFC7112] discusses the issues arising in a specific fragmentation
case where the IPv6 header chain is fragmented into two or more
fragments (and formally forbids such fragmentation case).
o [RFC6946] discusses a flawed (but common) processing of the so-
called IPv6 "atomic fragments", and specified improved processing
of such packets.
o [RFC8021] deprecates the generation of IPv6 atomic fragments.
o [RFC8504] clarifies processing rules for packets with extension
headers, and also allows hosts to enforce limits on the number of
options included in IPv6 EHs.
o [RFC7739] discusses the security implications of predictable
fragment Identification values, and provides recommendations for
the generation of these values.
o [RFC6980] analyzes the security implications of employing IPv6
fragmentation with Neighbor Discovery for IPv6, and formally
recommends against such usage.
Additionally, [RFC8200] has relaxed the requirement that "all nodes
examine and process the Hop-by-Hop Options header" from [RFC2460], by
specifying that only nodes that have been explicitly configured to
process the Hop-by-Hop Options header are required to do so.
A number of studies have measured the extent to which packets
employing IPv6 extension headers are dropped in the public Internet:
o [PMTUD-Blackholes], [Gont-IEPG88], [Gont-Chown-IEPG89], and
[Linkova-Gont-IEPG90] presented some preliminary measurements
regarding the extent to which packet containing IPv6 EHs are
dropped in the public Internet.
Gont, et al. Expires March 31, 2021 [Page 7]
Internet-Draft IPv6 Extension Headers September 2020
o [RFC7872] presents more comprehensive results and documents the
methodology for obtaining the presented results.
o [Huston-2017] and [Huston-2020] measured packet drops resulting
from IPv6 fragmentation when communicating with DNS servers.
5. Packet Forwarding Engine Constraints
Most contemporary routers use dedicated hardware (e.g. ASICs or
NPUs) to determine how to forward packets across their internal
fabrics (see [IEPG94-Scudder] and [APNIC-Scudder] for details). One
of the common methods of handling next-hop lookup is to send a small
portion of the ingress packet to a lookup engine with specialised
hardware (e.g. ternary CAM or RLDRAM) to determine the packet's next-
hop. Technical constraints mean that there is a trade-off between
the amount of data sent to the lookup engine and the overall
performance of the lookup engine. If more data is sent, the lookup
engine can inspect further into the packet, but the overall
performance of the system will be reduced. If less data is sent, the
overall performance of the router will be increased but the packet
lookup engine may not be able to inspect far enough into a packet to
determine how it should be handled.
NOTE:
For example, contemporary high-end routers can use up to 192 bytes
of header (Cisco ASR9000 Typhoon) or 384 bytes of header (Juniper
MX Trio).
If a hardware forwarding engine on a contemporary router cannot make
a forwarding decision about a packet because critical information is
not sent to the look-up engine, then the router will normally drop
the packet.
NOTE:
Section 6 discusses some of the reasons for which a contemporary
router might need to access layer-4 information to make a
forwarding decision.
Historically, some packet forwarding engines punted packets of this
form to the control plane for more in-depth analysis, but this is
unfeasible on most current router architectures as a result of the
vast difference between the hardware forwarding capacity of the
router and processing capacity of the control plane and the size of
the management link which connects the control plane to the
forwarding plane.
Gont, et al. Expires March 31, 2021 [Page 8]
Internet-Draft IPv6 Extension Headers September 2020
If an IPv6 header chain is sufficiently long that its header exceeds
the packet look-up capacity of the router, then it may be dropped due
to hardware inability to determine how it should be handled.
5.1. Recirculation
Although TLV chains are amenable to iterative processing on
architectures which have packet look-up engines with deep inspection
capabilities, some packet forwarding engines manage IPv6 Extension
Header chains using recirculation. This approach processes Extension
Headers one at a time: when processing on one Extension Header is
completed, the packet is looped back through the processing engine
again. This recirculation process continues repeatedly until there
are no more Extension Headers left to be processed.
Recirculation is typically used on packet forwarding engines with
limited look-up capability, as it allows arbitrarily long header
chains to be processed without the complexity and cost associated
with packet forwarding engines which have deep look-up capabilities.
However, recirculation can impact the forwarding capacity of
hardware, as each packet will pass through the processing engine
multiple times. Depending on configuration, the type of packets
being processed, and the hardware capabilities of the packet
forwarding engine, this may impact data-plane throughput performance
on the router.
6. Requirement to Process Layer-3/layer-4 information in Intermediate
Systems
The following subsections discuss some of reasons for which
contemporary routers and middle-boxes may need to process Layer-3/
layer-4 information to make a forwarding decision.
6.1. ECMP and Hash-based Load-Sharing
In the case of ECMP (equal cost multi path) load sharing, the router
on the sending side of the link needs to make a decision regarding
which of the links to use for a given packet. Since round-robin
usage of the links is usually avoided in order to prevent packet
reordering, forwarding engines need to use a mechanism which will
consistently forward the same data streams down the same forwarding
paths. Most forwarding engines achieve this by calculating a simple
hash using an n-tuple gleaned from a combination of layer-2 through
to layer-4 packet header information. This n-tuple will typically
use the src/dst MAC address, src/dst IP address, and if possible
further layer-4 src/dst port information. As layer-4 port
information increases the entropy of the hash, it is normally highly
desirable to use it where possible.
Gont, et al. Expires March 31, 2021 [Page 9]
Internet-Draft IPv6 Extension Headers September 2020
We note that in the IPv6 world, flows are expected to be identified
by means of the IPv6 Flow Label [RFC6437]. Thus, ECMP and Hash-based
Load-Sharing would be possible without the need to process the entire
IPv6 header chain to obtain upper-layer information to identify
flows. However, we note that for a long time many IPv6
implementations failed to set the Flow Label, and ECMP and Hash-based
Load-Sharing devices also did not employ the Flow Label for
performing their task.
Clearly, widespread support of [RFC6437] would relieve middle-boxes
from having to process the entire IPv6 header chain, making Flow
Label-based ECMP and Hash-based Load-Sharing [RFC6438] feasible.
While support of [RFC6437] is currently widespread for current
versions of all popular host implementations, there is still only
marginal usage of the IPv6 Flow Label for ECMP and load balancing
[Cunha-2020] -- possibly as a result of issues that have been found
in host implementations and middle-boxes [Jaeggli-2018].
6.2. Enforcing infrastructure ACLs
Generally speaking, infrastructure ACLs (iACLs) drop unwanted packets
destined to parts of a provider's infrastructure, because they are
not operationally needed and can be used for attacks of different
sorts against router control planes. Some traffic needs to be
differentiated depending on layer-3 or layer-4 criteria to achieve a
useful balance of protection and functionality, for example:
o Permit some amount of ICMP echo (ping) traffic towards a router's
addresses for troubleshooting.
o Permit BGP sessions on the shared network of an exchange point
(potentially differentiating between the amount of packets/seconds
permitted for established sessions and connection establishment),
but do not permit other traffic from the same peer IP addresses.
6.3. DDoS Management and Customer Requests for Filtering
The case of customer DDoS protection and edge-to-core customer
protection filters is similar in nature to the infrastructure ACL
protection. Similar to infrastructure ACL protection, layer-4 ACLs
generally need to be applied as close to the edge of the network as
possible, even though the intent is usually to protect the customer
edge rather than the provider core. Application of layer-4 DDoS
protection to a network edge is often automated using Flowspec
[RFC5575].
Gont, et al. Expires March 31, 2021 [Page 10]
Internet-Draft IPv6 Extension Headers September 2020
For example, a web site which normally only handled traffic on TCP
ports 80 and 443 could be subject to a volumetric DDoS attack using
NTP and DNS packets with randomised source IP address, thereby
rendering traditional [RFC5635] source-based real-time black hole
mechanisms useless. In this situation, DDoS protection ACLs could be
configured to block all UDP traffic at the network edge without
impairing the web server functionality in any way. Thus, being able
to block arbitrary protocols at the network edge can avoid DDoS-
related problems both in the provider network and on the customer
edge link.
6.4. Network Intrusion Detection and Prevention
Network Intrusion Detection Systems (NIDS) examine network traffic
and try to identify traffic patterns that can be correlated to
network-based attacks. These systems generally inspect application-
layer traffic (if possible), but at the bare minimum inspect layer-4
flows. When attack activity is inferred, the operator is signaled of
the potential intrusion attempt.
Network Intrusion Prevention Systems (IPS) operate similarly to
NIDS's, but they may also prevent intrusions by reacting to detected
attack attempts by e.g. triggering packet filtering policies at
firewalls and other devices.
Use of extension headers may result problematic for NIDS/IPS, since:
o Extension headers increase the complexity of resulting traffic,
and the associated work and system requirements to process it.
o Use of unknown extension headers may prevent an NIDS/IPS to
process layer-4 information
o Use of IPv6 fragmentation requires a stateful fragment-reassembly
operation, even for decoy traffic employing forged source
addresses (see e.g. [nmap]).
As a result, in order to increase the efficiency or effectiveness of
these systems, packets employing IPv6 extension headers may be
dropped at the network ingress point(s) of networks that deploy these
systems.
6.5. Firewalling
Firewalls enforce security policies by means of packet filtering.
These systems generally inspect layer-3 and layer-4 traffic, and may
also examine application-layer traffic flows.
Gont, et al. Expires March 31, 2021 [Page 11]
Internet-Draft IPv6 Extension Headers September 2020
As with NIDS/IPS (Section 6.4), use of IPv6 extension headers may
represent a challenge to network firewalls, since:
o Extension headers increase the complexity of resulting traffic,
and the associated work and system requirements to process it (see
e.g. [Zack-FW-Benchmark]).
o Use of unknown extension headers may prevent an NIDS/IPS to
process layer-4 information
o Use of IPv6 fragmentation requires a stateful fragment-reassembly
operation, even for decoy traffic employing forged source
addresses (see e.g. [nmap]).
Additionally, a common firewall filtering policy is the so-called
"default deny", where all traffic is blocked (by default), and only
expected traffic is added to an "allow/accept list".
As a result, whether because of the challenges represented by
extension headers or because the use of IPv6 extension headers has
not been explicitly allowed, packets employing IPv6 extension headers
may be dropped by network firewalls.
7. Operational Implications
7.1. Inability to Find Layer-4 Information
As discussed in Section 6, contemporary routers and middle-boxes that
need to find the layer-4 header must process the entire IPv6
extension header chain. When such devices are unable to obtain the
required information, they may simply resort to dropping the
corresponding packets.
7.2. Route-Processor Protection
Most contemporary routers have a fast hardware-assisted forwarding
plane and a loosely coupled control plane, connected together with a
link that has much less capacity than the forwarding plane could
handle. Traffic differentiation cannot be done by the control plane
side, because this would overload the internal link connecting the
forwarding plane to the control plane.
The Hop-by-Hop Options header has been particularly challenging since
in most circumstances, the corresponding packet is punted to the
control plane for processing. As a result, operators usually drop
IPv6 packets containing this extension header. Please see [RFC6192]
for advice regarding protection of the router control plane.
Gont, et al. Expires March 31, 2021 [Page 12]
Internet-Draft IPv6 Extension Headers September 2020
7.3. Inability to Perform Fine-grained Filtering
Some router implementations lack fine-grained filtering of IPv6
extension headers. For example, an operator may want to drop packets
containing Routing Header Type 0 (RHT0) but may only be able to
filter on the extension header type (Routing Header). As a result,
the operator may end up enforcing a more coarse filtering policy
(e.g. "drop all packets containing a Routing Header" vs. "only drop
packets that contain a Routing Header Type 0").
7.4. Security Concerns Associated with IPv6 Extension Headers
The security implications of IPv6 Extension Headers generally fall
into one or more of these categories:
o Evasion of security controls
o DoS due to processing requirements
o DoS due to implementation errors
o Extension Header-specific issues
Unlike IPv4 packets where the upper-layer protocol can be trivially
found by means of the "IHL" ("Internet Header Length") IPv4 header
field, the structure of IPv6 packets is more flexible and complex,
and may represent a challenge for devices that need to find this
information, since locating upper-layer protocol information requires
that all IPv6 extension headers be examined. This has presented
implementation difficulties, and packet filtering mechanisms that
require upper-layer information (even if just the upper layer
protocol type) can be trivially circumvented by inserting IPv6
Extension Headers between the main IPv6 header and the upper layer
protocol. [RFC7113] describes this issue for the RA-Guard case, but
the same techniques can be employed to circumvent other IPv6 firewall
and packet filtering mechanisms. Additionally, implementation
inconsistencies in packet forwarding engines may result in evasion of
security controls [I-D.kampanakis-6man-ipv6-eh-parsing] [Atlasis2014]
[BH-EU-2014].
Packets with attached IPv6 Extension Headers may impact performance
on routers that forward them. Unless appropriate mitigations are put
in place (e.g., packet dropping and/or rate-limiting), an attacker
could simply send a large amount of IPv6 traffic employing IPv6
Extension Headers with the purpose of performing a Denial of Service
(DoS) attack (see Section 7 for further details).
NOTE:
Gont, et al. Expires March 31, 2021 [Page 13]
Internet-Draft IPv6 Extension Headers September 2020
In the most trivial case, a packet that includes a Hop-by-Hop
Options header might go through the slow forwarding path, and be
processed by the router's CPU. Another possible case might be
where a router that has been configured to enforce an ACL based on
upper-layer information (e.g., upper layer protocol or TCP
Destination Port), needs to process the entire IPv6 header chain
(in order to find the required information), causing the packet to
be processed in the slow path [Cisco-EH-Cons]. We note that, for
obvious reasons, the aforementioned performance issues may affect
other devices such as firewalls, Network Intrusion Detection
Systems (NIDS), etc. [Zack-FW-Benchmark]. The extent to which
these devices are affected is typically implementation-dependent.
IPv6 implementations, like all other software, tend to mature with
time and wide-scale deployment. While the IPv6 protocol itself has
existed for over 20 years, serious bugs related to IPv6 Extension
Header processing continue to be discovered (see e.g. [Cisco-Frag1],
[Cisco-Frag2], and [FreeBSD-SA]). Because there is currently little
operational reliance on IPv6 Extension headers, the corresponding
code paths are rarely exercised, and there is the potential for bugs
that still remain to be discovered in some implementations.
IPv6 Fragment Headers are employed to allow fragmentation of IPv6
packets. While many of the security implications of the
fragmentation / reassembly mechanism are known from the IPv4 world,
several related issues have crept into IPv6 implementations. These
range from denial of service attacks to information leakage, as
discussed in [RFC7739], [Bonica-NANOG58] and [Atlasis2012]).
8. IANA Considerations
There are no IANA registries within this document. The RFC-Editor
can remove this section before publication of this document as an
RFC.
9. Security Considerations
The security implications of IPv6 extension headers are discussed in
Section 7.4. This document does not introduce any new security
issues.
10. Acknowledgements
The authors would like to thank (in alphabetical order) Mikael
Abrahamsson, Fred Baker, Brian Carpenter, Tim Chown, Owen DeLong, Tom
Herbert, Lee Howard, Tom Petch, Sander Steffann, Eduard Vasilenko,
Eric Vyncke, Jingrong Xie, and Andrew Yourtchenko, for providing
valuable comments on earlier versions of this document.
Gont, et al. Expires March 31, 2021 [Page 14]
Internet-Draft IPv6 Extension Headers September 2020
Fernando Gont would like to thank Jan Zorz / Go6 Lab
<https://go6lab.si/>, Jared Mauch, and Sander Steffann
<https://steffann.nl/>, for providing access to systems and networks
that were employed to perform experiments and measurements involving
packets with IPv6 Extension Headers.
11. References
11.1. Normative References
[RFC2460] Deering, S. and R. Hinden, "Internet Protocol, Version 6
(IPv6) Specification", RFC 2460, DOI 10.17487/RFC2460,
December 1998, <https://www.rfc-editor.org/info/rfc2460>.
[RFC5095] Abley, J., Savola, P., and G. Neville-Neil, "Deprecation
of Type 0 Routing Headers in IPv6", RFC 5095,
DOI 10.17487/RFC5095, December 2007,
<https://www.rfc-editor.org/info/rfc5095>.
[RFC5722] Krishnan, S., "Handling of Overlapping IPv6 Fragments",
RFC 5722, DOI 10.17487/RFC5722, December 2009,
<https://www.rfc-editor.org/info/rfc5722>.
[RFC6946] Gont, F., "Processing of IPv6 "Atomic" Fragments",
RFC 6946, DOI 10.17487/RFC6946, May 2013,
<https://www.rfc-editor.org/info/rfc6946>.
[RFC6980] Gont, F., "Security Implications of IPv6 Fragmentation
with IPv6 Neighbor Discovery", RFC 6980,
DOI 10.17487/RFC6980, August 2013,
<https://www.rfc-editor.org/info/rfc6980>.
[RFC7112] Gont, F., Manral, V., and R. Bonica, "Implications of
Oversized IPv6 Header Chains", RFC 7112,
DOI 10.17487/RFC7112, January 2014,
<https://www.rfc-editor.org/info/rfc7112>.
[RFC8021] Gont, F., Liu, W., and T. Anderson, "Generation of IPv6
Atomic Fragments Considered Harmful", RFC 8021,
DOI 10.17487/RFC8021, January 2017,
<https://www.rfc-editor.org/info/rfc8021>.
[RFC8200] Deering, S. and R. Hinden, "Internet Protocol, Version 6
(IPv6) Specification", STD 86, RFC 8200,
DOI 10.17487/RFC8200, July 2017,
<https://www.rfc-editor.org/info/rfc8200>.
Gont, et al. Expires March 31, 2021 [Page 15]
Internet-Draft IPv6 Extension Headers September 2020
[RFC8504] Chown, T., Loughney, J., and T. Winters, "IPv6 Node
Requirements", BCP 220, RFC 8504, DOI 10.17487/RFC8504,
January 2019, <https://www.rfc-editor.org/info/rfc8504>.
11.2. Informative References
[APNIC-Scudder]
Scudder, J., "Modern router architecture and IPv6", APNIC
Blog, June 4, 2020, <https://blog.apnic.net/2020/06/04/
modern-router-architecture-and-ipv6/>.
[Atlasis2012]
Atlasis, A., "Attacking IPv6 Implementation Using
Fragmentation", BlackHat Europe 2012. Amsterdam,
Netherlands. March 14-16, 2012,
<https://media.blackhat.com/bh-eu-12/Atlasis/bh-eu-12-
Atlasis-Attacking_IPv6-Slides.pdf>.
[Atlasis2014]
Atlasis, A., "A Novel Way of Abusing IPv6 Extension
Headers to Evade IPv6 Security Devices", May 2014,
<http://www.insinuator.net/2014/05/a-novel-way-of-abusing-
ipv6-extension-headers-to-evade-ipv6-security-devices/>.
[BH-EU-2014]
Atlasis, A., Rey, E., and R. Schaefer, "Evasion of High-
End IDPS Devices at the IPv6 Era", BlackHat Europe 2014,
2014, <https://www.ernw.de/download/eu-14-Atlasis-Rey-
Schaefer-briefings-Evasion-of-HighEnd-IPS-Devices-wp.pdf>.
[Bonica-NANOG58]
Bonica, R., "IPV6 FRAGMENTATION: The Case For
Deprecation", NANOG 58. New Orleans, Louisiana, USA. June
3-5, 2013, <https://www.nanog.org/sites/default/files/
mon.general.fragmentation.bonica.pdf>.
[Cisco-EH-Cons]
Cisco, "IPv6 Extension Headers Review and Considerations",
October 2006,
<http://www.cisco.com/en/US/technologies/tk648/tk872/
technologies_white_paper0900aecd8054d37d.pdf>.
[Cisco-Frag1]
Cisco, "Cisco IOS Software IPv6 Virtual Fragmentation
Reassembly Denial of Service Vulnerability", September
2013, <http://tools.cisco.com/security/center/content/
CiscoSecurityAdvisory/cisco-sa-20130925-ipv6vfr>.
Gont, et al. Expires March 31, 2021 [Page 16]
Internet-Draft IPv6 Extension Headers September 2020
[Cisco-Frag2]
Cisco, "Cisco IOS XR Software Crafted IPv6 Packet Denial
of Service Vulnerability", June 2015,
<http://tools.cisco.com/security/center/content/
CiscoSecurityAdvisory/cisco-sa-20150611-iosxr>.
[Cunha-2020]
Cunha, I., "IPv4 vs IPv6 load balancing in Internet
routes", NPS/CAIDA 2020 Virtual IPv6 Workshop, 2020,
<https://www.cmand.org/workshops/202006-v6/slides/
cunha.pdf>.
[FreeBSD-SA]
FreeBSD, "FreeBSD Security Advisory FreeBSD-SA-20:24.ipv6:
IPv6 Hop-by-Hop options use-after-free bug", September
2020, <https://www.freebsd.org/security/advisories/
FreeBSD-SA-20:24.ipv6.asc>.
[Gont-Chown-IEPG89]
Gont, F. and T. Chown, "A Small Update on the Use of IPv6
Extension Headers", IEPG 89. London, UK. March 2, 2014,
<http://www.iepg.org/2014-03-02-ietf89/fgont-iepg-ietf89-
eh-update.pdf>.
[Gont-IEPG88]
Gont, F., "Fragmentation and Extension header Support in
the IPv6 Internet", IEPG 88. Vancouver, BC, Canada.
November 13, 2013, <http://www.iepg.org/2013-11-ietf88/
fgont-iepg-ietf88-ipv6-frag-and-eh.pdf>.
[Huston-2017]
Huston, G., "Dealing with IPv6 fragmentation in the
DNS", APNIC Blog, 2017,
<https://blog.apnic.net/2017/08/22/dealing-ipv6-
fragmentation-dns/>.
[Huston-2020]
Huston, G., "Measurement of IPv6 Extension Header
Support", NPS/CAIDA 2020 Virtual IPv6 Workshop, 2020,
<https://www.cmand.org/workshops/202006-v6/
slides/2020-06-16-xtn-hdrs.pdf>.
[I-D.ietf-opsec-ipv6-eh-filtering]
Gont, F. and W. LIU, "Recommendations on the Filtering of
IPv6 Packets Containing IPv6 Extension Headers", draft-
ietf-opsec-ipv6-eh-filtering-06 (work in progress), July
2018.
Gont, et al. Expires March 31, 2021 [Page 17]
Internet-Draft IPv6 Extension Headers September 2020
[I-D.kampanakis-6man-ipv6-eh-parsing]
Kampanakis, P., "Implementation Guidelines for parsing
IPv6 Extension Headers", draft-kampanakis-6man-ipv6-eh-
parsing-01 (work in progress), August 2014.
[I-D.taylor-v6ops-fragdrop]
Jaeggli, J., Colitti, L., Kumari, W., Vyncke, E., Kaeo,
M., and T. Taylor, "Why Operators Filter Fragments and
What It Implies", draft-taylor-v6ops-fragdrop-02 (work in
progress), December 2013.
[I-D.wkumari-long-headers]
Kumari, W., Jaeggli, J., Bonica, R., and J. Linkova,
"Operational Issues Associated With Long IPv6 Header
Chains", draft-wkumari-long-headers-03 (work in progress),
June 2015.
[IEPG94-Scudder]
Petersen, B. and J. Scudder, "Modern Router Architecture
for Protocol Designers", IEPG 94. Yokohama, Japan.
November 1, 2015, <http://www.iepg.org/2015-11-01-ietf94/
IEPG-RouterArchitecture-jgs.pdf>.
[Jaeggli-2018]
Jaeggli, G., "Dealing with IPv6 fragmentation in the
DNS", APNIC Blog, 2018,
<https://blog.apnic.net/2018/01/11/ipv6-flow-label-misuse-
hashing/>.
[Linkova-Gont-IEPG90]
Linkova, J. and F. Gont, "IPv6 Extension Headers in the
Real World v2.0", IEPG 90. Toronto, ON, Canada. July 20,
2014, <http://www.iepg.org/2014-07-20-ietf90/iepg-
ietf90-ipv6-ehs-in-the-real-world-v2.0.pdf>.
[nmap] Fyodor, "Dealing with IPv6 fragmentation in the
DNS", Firewall/IDS Evasion and Spoofing,
<https://nmap.org/book/man-bypass-firewalls-ids.html>.
[PMTUD-Blackholes]
De Boer, M. and J. Bosma, "Discovering Path MTU black
holes on the Internet using RIPE Atlas", July 2012,
<http://www.nlnetlabs.nl/downloads/publications/pmtu-
black-holes-msc-thesis.pdf>.