menu.cpu=Processor

# Raduino 
# (Arduino Nano on a board with a SI5351 chip and a socket for a 16x2 LCD)
raduino.name=Raduino (Arduino Nano)

# Clock outputs 6 and 7 are not connected to anything so we can reduce code
# size by not supporting them.
raduino.build.extra_flags=-DSI5351_WITH_CLK67=0

# the rest of this file is (almost) a copy of the Arduino Nano section of
# the built-in boards.txt.
# remember to copy the bootloaders to bootloaders/atmega under the folder
# this file is in or you will get a warning from the IDE.
# Alternatively comment out the bootloader.file lines.

raduino.upload.tool=arduino:avrdude
raduino.upload.protocol=arduino

raduino.bootloader.tool=arduino:avrdude
raduino.bootloader.unlock_bits=0x3F
raduino.bootloader.lock_bits=0x0F

raduino.build.f_cpu=16000000L
raduino.build.board=AVR_NANO
raduino.build.core=arduino:arduino
raduino.build.variant=arduino:eightanaloginputs

## Arduino Nano w/ ATmega328P
## --------------------------
raduino.menu.cpu.atmega328=ATmega328P

raduino.menu.cpu.atmega328.upload.maximum_size=30720
raduino.menu.cpu.atmega328.upload.maximum_data_size=2048
raduino.menu.cpu.atmega328.upload.speed=57600

raduino.menu.cpu.atmega328.bootloader.low_fuses=0xFF
raduino.menu.cpu.atmega328.bootloader.high_fuses=0xDA
raduino.menu.cpu.atmega328.bootloader.extended_fuses=0xFD
raduino.menu.cpu.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex

raduino.menu.cpu.atmega328.build.mcu=atmega328p

## Arduino Nano w/ ATmega168
## -------------------------
raduino.menu.cpu.atmega168=ATmega168

raduino.menu.cpu.atmega168.upload.maximum_size=14336
raduino.menu.cpu.atmega168.upload.maximum_data_size=1024
raduino.menu.cpu.atmega168.upload.speed=19200

raduino.menu.cpu.atmega168.bootloader.low_fuses=0xff
raduino.menu.cpu.atmega168.bootloader.high_fuses=0xdd
raduino.menu.cpu.atmega168.bootloader.extended_fuses=0xF8
raduino.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex

raduino.menu.cpu.atmega168.build.mcu=atmega168