From 516a4ba28d321c9d3fb62b49069c29dd8653d286 Mon Sep 17 00:00:00 2001 From: Ivan Grokhotkov Date: Tue, 27 Feb 2024 12:19:19 +0100 Subject: [PATCH] fix(sdmmc): use correct argument for ACMD41 in SPI mode ACMD41 argument is different between SD mode and SPI mode. In SPI mode, the only non-zero bit may be the HCS bit. Unlike the SD mode, the bits reflecting the host's OCR should be zero. Previously, we used to set these bits the same way as for the SD mode. This has caused certain cards to fail initializing, apparently their controllers have checked the ACMD41 argument more strictly and refused to finish initialization, resulting in an error such as sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107 (Note that this error may have other causes than the one fixed in this commit. For example, if the card doesn't have a sufficient and stable power supply, it may also fail to complete the internal initialization process, and will never clear the busy flag in R1 response.) Closes https://github.com/espressif/esp-idf/issues/6686 Closes https://github.com/espressif/esp-idf/issues/10542 --- components/sdmmc/sdmmc_common.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/components/sdmmc/sdmmc_common.c b/components/sdmmc/sdmmc_common.c index b57e67ef1a4d..a6bcd74f96e6 100644 --- a/components/sdmmc/sdmmc_common.c +++ b/components/sdmmc/sdmmc_common.c @@ -29,17 +29,27 @@ esp_err_t sdmmc_init_ocr(sdmmc_card_t* card) */ uint32_t host_ocr = get_host_ocr(card->host.io_voltage); + + /* In SPI mode, the only non-zero bit of ACMD41 is HCS (bit 30) + * In SD mode, bits 23:8 contain the supported voltage mask + */ + uint32_t acmd41_arg = 0; + if (!host_is_spi(card)) { + acmd41_arg = host_ocr; + } + if ((card->ocr & SD_OCR_SDHC_CAP) != 0) { - host_ocr |= SD_OCR_SDHC_CAP; + acmd41_arg |= SD_OCR_SDHC_CAP; } + /* Send SEND_OP_COND (ACMD41) command to the card until it becomes ready. */ - err = sdmmc_send_cmd_send_op_cond(card, host_ocr, &card->ocr); + err = sdmmc_send_cmd_send_op_cond(card, acmd41_arg, &card->ocr); /* If time-out, re-try send_op_cond as MMC */ if (err == ESP_ERR_TIMEOUT && !host_is_spi(card)) { ESP_LOGD(TAG, "send_op_cond timeout, trying MMC"); card->is_mmc = 1; - err = sdmmc_send_cmd_send_op_cond(card, host_ocr, &card->ocr); + err = sdmmc_send_cmd_send_op_cond(card, acmd41_arg, &card->ocr); } if (err != ESP_OK) {