Stream Deck Control Daemon

The daemon should run in the background. It is controlled by the configuration in

~/.config/streamdeckd.conf

which is using the syntax of libconfig. An alternative file name can be provided as the command line parameter. The file content could look as follows:

serial= "CL...";
 
brightness= 50;
idle: {
  away = 300;
  brightness = 20;
  off = 1800;
};
 
keys: (
  {
    r1c1: {
      type: "keylight";
      serial: "BW...";
      function: "on/off";
    };
    r1c2: {
      type: "keylight";
      serial: "BW...";
      function: "brightness-";
    };
  
    r2c1: {
      type: "key";
      sequence: "alt+ctrl+shift+1"
      icon: "preview1.png";
    };
    r3c1: {
      type: "key";
      sequence: ("alt+ctrl+shift+1", "alt+ctrl+shift+quoteleft")
      icon: "switch1.png";
    };
    
    r4c1: {
      type: "execute";
      command: "chromium-browser --new-window https://example.com/path";
      icon: "example.png";
    };
    r1c8: {
      type: "nextpage";
    };
  },
  {
    r1c7: {
      type: "prevpage";
    };
  }
);

The first serial definition is the serial number of the StreamDeck which is meant to be controlled. The support is limited to those devices supported by the streamdeckpp package which should be, as of the time of this writing, be all of them. The library can be used to determine the serial number if it is not known.

The bightness definition at the top level defines the brightness of the Stream Deck display when the user is active. The behavior when the user is idle can be defined in the idle group. When it is missing nothing special happens. Otherwise, the display is dimmed to the level specified in the brightness definition inside the idle group when the idle time reaches away seconds. After off seconds the display is turned off entirely. At that point no button can be pressed. The display is returned to normal operation when the keyboard and/or mouse is used.

The second top-level definition is the keys list. It contains one entry, which must be a directory as explained below, per page. A page consists of the button which are visible together. One or more buttons can be specified to navigate between the pages.

The dictionaries defining each page should contain an entry for every key that is used. The individual keys are specified as rXcY which X is the row number and Y the column number of the key, from the top/left starting counting at one.

The definition for the individual keys is a dictionary again. It must always contain an entry type which specifies the action associated with the specific key. The possible values are:

The type entry specifies what happens when the key is pressed. Currently three types are defined:

• execute which requires an additional dicionary item command. The string value of command is passed to the system function to be executed when the respective button is pressed. An icon value is needed for the icon to display on the button.

• keylight which introduces an action to control a KeyLight device or several. Each dictionary for this type must also define a function value which specifies the type of action that is performed. Supported so far are toggle, brightness-, brightness+, color-, and color+. The toggle function turns on a light that is turned off and turns it off otherwise. If a serial value is given only a device with the given serial number is affected. Otherwise all found devices are controlled.

• key which is used to send the key sequence specified in the dictionary item sequence to the current window. This by itself can be useful, a shortcut sequence for an editor or game can be issued. Some programs listen for key sequences globally and if the specified key sequence is obscure enough this causes no problems. In the example above pressing the first button in the second row send the key 1 with the modifiers Alt, Ctrl, and Shift. Note the string notation to specify this. The next entry is an example of how a list of strings can be used to specify more than one key to be sent. An icon value is needed to specify the graphics shown on the button.

• obs which allows to control and monitor OBS through the websocket interface. The obs-websockets plugin must be installed to use this. Various functions are supported as described in a separate section below.

• nextpage changes the currently displayed page of buttons to the next higher one (or back to the first one). This is obviously only useful if more than one page of buttons is defined in the configuration.

• prevpage is similar to nextpage, just the opposite direction.

All actions except execute and key have default icons used for the graphics associated with them. If wanted they can be overwritten by providing either an icon entry or icon1 and icon2 entries. The latter is needed if the button has two different displays, depending on the state (e.g., KeyLight on or off). If the icon file names are not absolute path names the file is looked-up first in the internal resources, then the Pictures subdirectory in the user's home directory, and finally in the /usr/share/pixmaps directory.

Permissions

When the Wayland environment is used it is necessary for the process to access the event devices /dev/input/eventXX where XX is the number of the keyboard and mouse events. On Fedora systems these devices are not globally writable. A usable solution is to make the user member of the input group.

OBS Control

TBD

Notes

The KeyLight devices are located using mDNS. This does not always work 100% reliably, the devices seem not to send out the required signs of life frequently enough. The daemon tries to find the device a few times but if this fails the only remedy is to restart the daemon.

The process uses threads. Especially on high core-count machines there are a lot of them. The predominant reason for that is the ASIO functionality that is used by some libraries. It creates an internal thread pool and I haven't been able to find so far a way to limit the number of threads in that pool. Most of them should sleep all the time so the resource consumption should be minimal.

To Do

2. When config file changed, reload
3. GUI for creation of the config file
4. FTB button: when pressed, blink red until pressed again

Bugs

[N/A]

Author: Ulrich Drepper [email protected]