diff --git a/.coveragerc b/.coveragerc deleted file mode 100644 index f10df7d436..0000000000 --- a/.coveragerc +++ /dev/null @@ -1,32 +0,0 @@ -[run] -source = - distributed -omit = - distributed/tests/test* - distributed/*/tests/test* - distributed/cli/utils.py - distributed/cli/dask_spec.py - distributed/deploy/ssh.py - distributed/_version.py - distributed/pytest_resourceleaks.py - distributed/comm/ucx.py - -[report] -show_missing = True -exclude_lines = - # re-enable the standard pragma - pragma: nocover - pragma: no cover - # exclude nvml calls - [\s(.]nvml[\s(.] - [\s(.]pynvml[\s(.] - # exclude LOG_PDB - LOG_PDB - # always ignore type checking blocks - TYPE_CHECKING - except ImportError - @overload - -[html] -directory = coverage_html_report - diff --git a/.flake8 b/.flake8 new file mode 100644 index 0000000000..2949f1c9a4 --- /dev/null +++ b/.flake8 @@ -0,0 +1,37 @@ +# flake8 doesn't support pyproject.toml yet https://github.com/PyCQA/flake8/issues/234 +[flake8] +# References: +# https://flake8.readthedocs.io/en/latest/user/configuration.html +# https://flake8.readthedocs.io/en/latest/user/error-codes.html + +# Note: there cannot be spaces after commas here +exclude = __init__.py,versioneer.py,distributed/_concurrent_futures_thread.py +ignore = + # Ignores below are aligned with black https://github.com/psf/black/blob/main/.flake8 + # Whitespace before ':' + E203 + # Too many leading '#' for block comment + E266 + # Line too long, ignored in favor of B950 + E501 + # Line break occurred before a binary operator + W503 + # Line too long + B950 + # No explicit stacklevel in warnings.warn. FIXME we should correct this in the code + B028 + +per-file-ignores = + **/tests/*: + # Module level import not at top of file (to silence on pytest.importorskip) + # See https://github.com/PyCQA/pycodestyle/issues/472 + E402, + # Do not use variables named 'I', 'O', or 'l' + E741, + # Local variable name is assigned to but never used + F841, + # Do not call assert False since python -O removes these calls + B011, + +# B950 will only trigger at 88 +max-line-length = 80 diff --git a/.github/workflows/conda.yml b/.github/workflows/conda.yml index ffd4ef16ef..470745b26b 100644 --- a/.github/workflows/conda.yml +++ b/.github/workflows/conda.yml @@ -6,9 +6,9 @@ on: pull_request: paths: - setup.py - - requirements.txt - continuous_integration/recipes/** - .github/workflows/conda.yml + - pyproject.toml # When this workflow is queued, automatically cancel any previous running # or pending jobs from the same branch diff --git a/.github/workflows/tests.yaml b/.github/workflows/tests.yaml index beeef2aa94..411a35a953 100644 --- a/.github/workflows/tests.yaml +++ b/.github/workflows/tests.yaml @@ -154,7 +154,7 @@ jobs: shell: bash -l {0} # No SIGALRM available on Windows if: ${{ matrix.os != 'windows-latest' }} - run: sed -i.bak 's/timeout_method = thread/timeout_method = signal/' setup.cfg + run: sed -i.bak 's/timeout_method = "thread"/timeout_method = "signal"/' pyproject.toml - name: Disable IPv6 shell: bash -l {0} diff --git a/.pre-commit-config.yaml b/.pre-commit-config.yaml index 78ee22fbd0..c5fcfd6993 100644 --- a/.pre-commit-config.yaml +++ b/.pre-commit-config.yaml @@ -22,7 +22,6 @@ repos: hooks: - id: black language_version: python3 - exclude: versioneer.py args: - --target-version=py38 - repo: https://github.com/pycqa/flake8 @@ -38,6 +37,8 @@ repos: rev: v2.2.2 hooks: - id: codespell + additional_dependencies: + - tomli types_or: [rst, markdown] files: docs - repo: https://github.com/pre-commit/mirrors-mypy @@ -45,7 +46,7 @@ repos: hooks: - id: mypy # Override default --ignore-missing-imports - # Use setup.cfg if possible instead of adding command line parameters here + # Use pyproject.toml if possible instead of adding command line parameters here args: [--warn-unused-configs] additional_dependencies: # Type stubs diff --git a/MANIFEST.in b/MANIFEST.in index a5b7941607..9608328fb0 100644 --- a/MANIFEST.in +++ b/MANIFEST.in @@ -15,10 +15,8 @@ include setup.py include README.rst include LICENSE.txt include MANIFEST.in -include requirements.txt include distributed/py.typed exclude distributed/pytest_resourceleaks.py prune docs/_build -include versioneer.py include distributed/_version.py diff --git a/continuous_integration/recipes/distributed/meta.yaml b/continuous_integration/recipes/distributed/meta.yaml index eb9c12525c..ed75274d18 100644 --- a/continuous_integration/recipes/distributed/meta.yaml +++ b/continuous_integration/recipes/distributed/meta.yaml @@ -27,6 +27,8 @@ requirements: - python >=3.8 - pip - dask-core {{ dask_version }} + - versioneer =0.28 + - tomli # [py<311] run: - python >=3.8 - click >=8.0 diff --git a/distributed/_version.py b/distributed/_version.py index a37b7c1e8d..2db3ee0051 100644 --- a/distributed/_version.py +++ b/distributed/_version.py @@ -6,14 +6,18 @@ from __future__ import annotations -# This file is released into the public domain. Generated by -# versioneer-0.17 (https://github.com/warner/python-versioneer) +# This file is released into the public domain. +# Generated by versioneer-0.28 +# https://github.com/python-versioneer/python-versioneer """Git implementation of _version.py.""" +import errno +import functools import os import re import subprocess import sys +from typing import Callable def get_keywords(): @@ -51,12 +55,12 @@ class NotThisMethod(Exception): """Exception raised if a method is not valid for the current scenario.""" -LONG_VERSION_PY: dict = {} -HANDLERS = {} +LONG_VERSION_PY: dict[str, str] = {} +HANDLERS: dict[str, dict[str, Callable]] = {} def register_vcs_handler(vcs, method): # decorator - """Decorator to mark a method as the handler for a particular VCS.""" + """Create decorator to mark a method as the handler of a VCS.""" def decorate(f): """Store f in HANDLERS[vcs][method].""" @@ -71,22 +75,32 @@ def decorate(f): def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env=None): """Call the given command(s).""" assert isinstance(commands, list) - p = None - for c in commands: + process = None + + popen_kwargs = {} + if sys.platform == "win32": + # This hides the console window if pythonw.exe is used + startupinfo = subprocess.STARTUPINFO() + startupinfo.dwFlags |= subprocess.STARTF_USESHOWWINDOW + popen_kwargs["startupinfo"] = startupinfo + + for command in commands: try: - dispcmd = str([c] + args) + dispcmd = str([command] + args) # remember shell=False, so use git.cmd on windows, not just git - p = subprocess.Popen( - [c] + args, + process = subprocess.Popen( + [command] + args, cwd=cwd, env=env, stdout=subprocess.PIPE, stderr=(subprocess.PIPE if hide_stderr else None), + **popen_kwargs, ) break - except FileNotFoundError: - continue - except OSError as e: + except OSError: + e = sys.exc_info()[1] + if e.errno == errno.ENOENT: + continue if verbose: print("unable to run %s" % dispcmd) print(e) @@ -95,13 +109,13 @@ def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, env= if verbose: print(f"unable to find command, tried {commands}") return None, None - stdout = p.communicate()[0].strip().decode() - if p.returncode != 0: + stdout = process.communicate()[0].strip().decode() + if process.returncode != 0: if verbose: print("unable to run %s (error)" % dispcmd) print("stdout was %s" % stdout) - return None, p.returncode - return stdout, p.returncode + return None, process.returncode + return stdout, process.returncode def versions_from_parentdir(parentdir_prefix, root, verbose): @@ -123,9 +137,8 @@ def versions_from_parentdir(parentdir_prefix, root, verbose): "error": None, "date": None, } - else: - rootdirs.append(root) - root = os.path.dirname(root) # up a level + rootdirs.append(root) + root = os.path.dirname(root) # up a level if verbose: print( @@ -144,21 +157,20 @@ def git_get_keywords(versionfile_abs): # _version.py. keywords = {} try: - f = open(versionfile_abs) - for line in f.readlines(): - if line.strip().startswith("git_refnames ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["refnames"] = mo.group(1) - if line.strip().startswith("git_full ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["full"] = mo.group(1) - if line.strip().startswith("git_date ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["date"] = mo.group(1) - f.close() + with open(versionfile_abs) as fobj: + for line in fobj: + if line.strip().startswith("git_refnames ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["refnames"] = mo.group(1) + if line.strip().startswith("git_full ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["full"] = mo.group(1) + if line.strip().startswith("git_date ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["date"] = mo.group(1) except OSError: pass return keywords @@ -167,10 +179,14 @@ def git_get_keywords(versionfile_abs): @register_vcs_handler("git", "keywords") def git_versions_from_keywords(keywords, tag_prefix, verbose): """Get version information from git keywords.""" - if not keywords: - raise NotThisMethod("no keywords at all, weird") + if "refnames" not in keywords: + raise NotThisMethod("Short version file found") date = keywords.get("date") if date is not None: + # Use only the last line. Previous lines may contain GPG signature + # information. + date = date.splitlines()[-1] + # git-2.2.0 added "%cI", which expands to an ISO-8601 -compliant # datestamp. However we prefer "%ci" (which expands to an "ISO-8601 # -like" string, which we must then edit to make compliant), because @@ -195,7 +211,7 @@ def git_versions_from_keywords(keywords, tag_prefix, verbose): # refs/heads/ and refs/tags/ prefixes that would let us distinguish # between branches and tags. By ignoring refnames without digits, we # filter out many common branch names like "release" and - # "stabilization", as well as "HEAD" and "main". + # "stabilization", as well as "HEAD" and "master". tags = {r for r in refs if re.search(r"\d", r)} if verbose: print("discarding '%s', no digits" % ",".join(refs - tags)) @@ -205,6 +221,11 @@ def git_versions_from_keywords(keywords, tag_prefix, verbose): # sorting will prefer e.g. "2.0" over "2.0rc1" if ref.startswith(tag_prefix): r = ref[len(tag_prefix) :] + # Filter out refs that exactly match prefix or that don't start + # with a number once the prefix is stripped (mostly a concern + # when prefix is '') + if not re.match(r"\d", r): + continue if verbose: print("picking %s" % r) return { @@ -227,7 +248,7 @@ def git_versions_from_keywords(keywords, tag_prefix, verbose): @register_vcs_handler("git", "pieces_from_vcs") -def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): +def git_pieces_from_vcs(tag_prefix, root, verbose, runner=run_command): """Get version from 'git describe' in the root of the source tree. This only gets called if the git-archive 'subst' keywords were *not* @@ -238,7 +259,14 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): if sys.platform == "win32": GITS = ["git.cmd", "git.exe"] - out, rc = run_command(GITS, ["rev-parse", "--git-dir"], cwd=root, hide_stderr=True) + # GIT_DIR can interfere with correct operation of Versioneer. + # It may be intended to be passed to the Versioneer-versioned project, + # but that should not change where we get our version from. + env = os.environ.copy() + env.pop("GIT_DIR", None) + runner = functools.partial(runner, env=env) + + _, rc = runner(GITS, ["rev-parse", "--git-dir"], cwd=root, hide_stderr=not verbose) if rc != 0: if verbose: print("Directory %s not under git control" % root) @@ -246,7 +274,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): # if there is a tag matching tag_prefix, this yields TAG-NUM-gHEX[-dirty] # if there isn't one, this yields HEX[-dirty] (no NUM) - describe_out, rc = run_command( + describe_out, rc = runner( GITS, [ "describe", @@ -255,7 +283,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): "--always", "--long", "--match", - "%s*" % tag_prefix, + f"{tag_prefix}[[:digit:]]*", ], cwd=root, ) @@ -263,7 +291,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): if describe_out is None: raise NotThisMethod("'git describe' failed") describe_out = describe_out.strip() - full_out, rc = run_command(GITS, ["rev-parse", "HEAD"], cwd=root) + full_out, rc = runner(GITS, ["rev-parse", "HEAD"], cwd=root) if full_out is None: raise NotThisMethod("'git rev-parse' failed") full_out = full_out.strip() @@ -273,6 +301,38 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): pieces["short"] = full_out[:7] # maybe improved later pieces["error"] = None + branch_name, rc = runner(GITS, ["rev-parse", "--abbrev-ref", "HEAD"], cwd=root) + # --abbrev-ref was added in git-1.6.3 + if rc != 0 or branch_name is None: + raise NotThisMethod("'git rev-parse --abbrev-ref' returned error") + branch_name = branch_name.strip() + + if branch_name == "HEAD": + # If we aren't exactly on a branch, pick a branch which represents + # the current commit. If all else fails, we are on a branchless + # commit. + branches, rc = runner(GITS, ["branch", "--contains"], cwd=root) + # --contains was added in git-1.5.4 + if rc != 0 or branches is None: + raise NotThisMethod("'git branch --contains' returned error") + branches = branches.split("\n") + + # Remove the first line if we're running detached + if "(" in branches[0]: + branches.pop(0) + + # Strip off the leading "* " from the list of branches. + branches = [branch[2:] for branch in branches] + if "master" in branches: + branch_name = "master" + elif not branches: + branch_name = None + else: + # Pick the first branch that is returned. Good or bad. + branch_name = branches[0] + + pieces["branch"] = branch_name + # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] # TAG might have hyphens. git_describe = describe_out @@ -289,7 +349,7 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): # TAG-NUM-gHEX mo = re.search(r"^(.+)-(\d+)-g([0-9a-f]+)$", git_describe) if not mo: - # unparseable. Maybe git-describe is misbehaving? + # unparsable. Maybe git-describe is misbehaving? pieces["error"] = "unable to parse git-describe output: '%s'" % describe_out return pieces @@ -299,9 +359,10 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): if verbose: fmt = "tag '%s' doesn't start with prefix '%s'" print(fmt % (full_tag, tag_prefix)) - pieces[ - "error" - ] = f"tag '{full_tag}' doesn't start with prefix '{tag_prefix}'" + pieces["error"] = "tag '{}' doesn't start with prefix '{}'".format( + full_tag, + tag_prefix, + ) return pieces pieces["closest-tag"] = full_tag[len(tag_prefix) :] @@ -314,13 +375,14 @@ def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): else: # HEX: no tags pieces["closest-tag"] = None - count_out, rc = run_command(GITS, ["rev-list", "HEAD", "--count"], cwd=root) - pieces["distance"] = int(count_out) # total number of commits + out, rc = runner(GITS, ["rev-list", "HEAD", "--left-right"], cwd=root) + pieces["distance"] = len(out.split()) # total number of commits # commit date: see ISO-8601 comment in git_versions_from_keywords() - date = run_command(GITS, ["show", "-s", "--format=%ci", "HEAD"], cwd=root)[ - 0 - ].strip() + date = runner(GITS, ["show", "-s", "--format=%ci", "HEAD"], cwd=root)[0].strip() + # Use only the last line. Previous lines may contain GPG signature + # information. + date = date.splitlines()[-1] pieces["date"] = date.strip().replace(" ", "T", 1).replace(" ", "", 1) return pieces @@ -357,19 +419,66 @@ def render_pep440(pieces): return rendered -def render_pep440_pre(pieces): - """TAG[.post.devDISTANCE] -- No -dirty. +def render_pep440_branch(pieces): + """TAG[[.dev0]+DISTANCE.gHEX[.dirty]] . + + The ".dev0" means not master branch. Note that .dev0 sorts backwards + (a feature branch will appear "older" than the master branch). Exceptions: - 1: no tags. 0.post.devDISTANCE + 1: no tags. 0[.dev0]+untagged.DISTANCE.gHEX[.dirty] """ if pieces["closest-tag"]: rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + if pieces["branch"] != "master": + rendered += ".dev0" + rendered += plus_or_dot(pieces) + rendered += "%d.g%s" % (pieces["distance"], pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + else: + # exception #1 + rendered = "0" + if pieces["branch"] != "master": + rendered += ".dev0" + rendered += "+untagged.%d.g%s" % (pieces["distance"], pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + return rendered + + +def pep440_split_post(ver): + """Split pep440 version string at the post-release segment. + + Returns the release segments before the post-release and the + post-release version number (or -1 if no post-release segment is present). + """ + vc = str.split(ver, ".post") + return vc[0], int(vc[1] or 0) if len(vc) == 2 else None + + +def render_pep440_pre(pieces): + """TAG[.postN.devDISTANCE] -- No -dirty. + + Exceptions: + 1: no tags. 0.post0.devDISTANCE + """ + if pieces["closest-tag"]: if pieces["distance"]: - rendered += ".post.dev%d" % pieces["distance"] + # update the post release segment + tag_version, post_version = pep440_split_post(pieces["closest-tag"]) + rendered = tag_version + if post_version is not None: + rendered += ".post%d.dev%d" % (post_version + 1, pieces["distance"]) + else: + rendered += ".post0.dev%d" % (pieces["distance"]) + else: + # no commits, use the tag as the version + rendered = pieces["closest-tag"] else: # exception #1 - rendered = "0.post.dev%d" % pieces["distance"] + rendered = "0.post0.dev%d" % pieces["distance"] return rendered @@ -400,12 +509,41 @@ def render_pep440_post(pieces): return rendered +def render_pep440_post_branch(pieces): + """TAG[.postDISTANCE[.dev0]+gHEX[.dirty]] . + + The ".dev0" means not master branch. + + Exceptions: + 1: no tags. 0.postDISTANCE[.dev0]+gHEX[.dirty] + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%d" % pieces["distance"] + if pieces["branch"] != "master": + rendered += ".dev0" + rendered += plus_or_dot(pieces) + rendered += "g%s" % pieces["short"] + if pieces["dirty"]: + rendered += ".dirty" + else: + # exception #1 + rendered = "0.post%d" % pieces["distance"] + if pieces["branch"] != "master": + rendered += ".dev0" + rendered += "+g%s" % pieces["short"] + if pieces["dirty"]: + rendered += ".dirty" + return rendered + + def render_pep440_old(pieces): """TAG[.postDISTANCE[.dev0]] . The ".dev0" means dirty. - Eexceptions: + Exceptions: 1: no tags. 0.postDISTANCE[.dev0] """ if pieces["closest-tag"]: @@ -478,10 +616,14 @@ def render(pieces, style): if style == "pep440": rendered = render_pep440(pieces) + elif style == "pep440-branch": + rendered = render_pep440_branch(pieces) elif style == "pep440-pre": rendered = render_pep440_pre(pieces) elif style == "pep440-post": rendered = render_pep440_post(pieces) + elif style == "pep440-post-branch": + rendered = render_pep440_post_branch(pieces) elif style == "pep440-old": rendered = render_pep440_old(pieces) elif style == "git-describe": diff --git a/pyproject.toml b/pyproject.toml new file mode 100644 index 0000000000..4d5b49f1e7 --- /dev/null +++ b/pyproject.toml @@ -0,0 +1,248 @@ +[build-system] +requires = ["setuptools>=62.6", "versioneer[toml]==0.28"] +build-backend = "setuptools.build_meta" + +[project] +name = "distributed" +description = "Distributed scheduler for Dask" +maintainers = [{name = "Matthew Rocklin", email = "mrocklin@gmail.com"}] +license = {text = "BSD"} +classifiers = [ + "Development Status :: 5 - Production/Stable", + "Intended Audience :: Developers", + "Intended Audience :: Science/Research", + "License :: OSI Approved :: BSD License", + "Operating System :: OS Independent", + "Programming Language :: Python", + "Programming Language :: Python :: 3", + "Programming Language :: Python :: 3 :: Only", + "Programming Language :: Python :: 3.8", + "Programming Language :: Python :: 3.9", + "Programming Language :: Python :: 3.10", + "Programming Language :: Python :: 3.11", + "Topic :: Scientific/Engineering", + "Topic :: System :: Distributed Computing", +] +readme = "README.rst" +requires-python = ">=3.8" +dependencies = [ + "click >= 8.0", + "cloudpickle >= 1.5.0", + "dask == 2023.3.2", + "jinja2 >= 2.10.3", + "locket >= 1.0.0", + "msgpack >= 1.0.0", + "packaging >= 20.0", + "psutil >= 5.7.0", + "pyyaml >= 5.3.1", + "sortedcontainers >= 2.0.5", + "tblib >= 1.6.0", + "toolz >= 0.10.0", + "tornado >= 6.0.3", + "urllib3 >= 1.24.3", + "zict >= 2.2.0", +] +dynamic = ["version"] + +[project.urls] +Homepage = "https://distributed.dask.org" +Source = "https://github.com/dask/distributed" + +[project.entry-points.dask_cli] +scheduler = "distributed.cli.dask_scheduler:main" +worker = "distributed.cli.dask_worker:main" +ssh = "distributed.cli.dask_ssh:main" +spec = "distributed.cli.dask_spec:main" + +[project.scripts] +dask-ssh = "distributed.cli.dask_ssh:main" +dask-scheduler = "distributed.cli.dask_scheduler:main" +dask-worker = "distributed.cli.dask_worker:main" + +[tool.setuptools] +include-package-data = true +zip-safe = false + +[tool.setuptools.packages.find] +exclude = ["*tests*"] +namespaces = false + +[tool.setuptools.package-data] +"*" = [ + "templates/index.html", + "template.html", +] +distributed = [ + "http/templates/*.html", + "py.typed", +] + +[tool.isort] +sections = ["FUTURE", "STDLIB", "THIRDPARTY", "DISTRIBUTED", "FIRSTPARTY", "LOCALFOLDER"] +profile = "black" +skip_gitignore = true +force_to_top = ["true"] +default_section = "THIRDPARTY" +known_first_party = ["distributed"] +known_distributed = ["dask", "zict"] +add_imports = ["from __future__ import annotations"] + +[tool.versioneer] +VCS = "git" +style = "pep440" +versionfile_source = "distributed/_version.py" +versionfile_build = "distributed/_version.py" +tag_prefix = "" +parentdir_prefix = "distributed-" + +[tool.pytest.ini_options] +addopts = ''' +-v -rsxfE +--durations=20 +--color=yes +--ignore=continuous_integration +--ignore=docs +--ignore=.github +--strict-markers +--strict-config +-p no:asyncio +-p no:legacypath''' +filterwarnings = [ + "error", + '''ignore:Please use `dok_matrix` from the `scipy\.sparse` namespace, the `scipy\.sparse\.dok` namespace is deprecated.:DeprecationWarning''', + '''ignore:elementwise comparison failed. this will raise an error in the future:DeprecationWarning''', + '''ignore:unclosed \.send_recv_from_rpc' was never awaited:RuntimeWarning''', + '''ignore:coroutine 'Scheduler\.restart' was never awaited:RuntimeWarning''', + '''ignore:coroutine 'Semaphore._refresh_leases' was never awaited:RuntimeWarning''', + '''ignore:coroutine 'ServerSession\.with_document_locked' was never awaited''', + '''ignore:overflow encountered in long_scalars:RuntimeWarning''', + '''ignore:Creating scratch directories is taking a surprisingly long time.*:UserWarning''', + '''ignore:Scheduler already contains a plugin with name nonidempotentplugin. overwriting:UserWarning''', + '''ignore:Increasing number of chunks by factor of 20::dask.array.core.PerformanceWarning''', + '''ignore::distributed.versions.VersionMismatchWarning''', + '''ignore:(?s)Exception in thread.*old_ssh.*channel\.send\(b"\\x03"\).*Socket is closed:pytest.PytestUnhandledThreadExceptionWarning''', + '''ignore:(?s)Exception in thread.*paramiko\.ssh_exception\.NoValidConnectionsError:pytest.PytestUnhandledThreadExceptionWarning''', + '''ignore:(?s)Exception ignored in. .*sem_unlink.*FileNotFoundError:pytest.PytestUnraisableExceptionWarning''', + '''ignore:(?s)Exception ignored in. = 8.0 -cloudpickle >= 1.5.0 -dask == 2023.3.2 -jinja2 >= 2.10.3 -locket >= 1.0.0 -msgpack >= 1.0.0 -packaging >= 20.0 -psutil >= 5.7.0 -pyyaml >= 5.3.1 -sortedcontainers >= 2.0.5 -tblib >= 1.6.0 -toolz >= 0.10.0 -tornado >= 6.0.3 -urllib3 >= 1.24.3 -zict >= 2.2.0 diff --git a/setup.cfg b/setup.cfg deleted file mode 100644 index 58d3213606..0000000000 --- a/setup.cfg +++ /dev/null @@ -1,162 +0,0 @@ -[flake8] -# References: -# https://flake8.readthedocs.io/en/latest/user/configuration.html -# https://flake8.readthedocs.io/en/latest/user/error-codes.html - -# Note: there cannot be spaces after commas here -exclude = __init__.py,versioneer.py,distributed/_concurrent_futures_thread.py -ignore = - # Ignores below are aligned with black https://github.com/psf/black/blob/main/.flake8 - # Whitespace before ':' - E203 - # Too many leading '#' for block comment - E266 - # Line too long, ignored in favor of B950 - E501 - # Line break occurred before a binary operator - W503 - # Line too long - B950 - # No explicit stacklevel in warnings.warn. FIXME we should correct this in the code - B028 - -per-file-ignores = - **/tests/*: - # Module level import not at top of file (to silence on pytest.importorskip) - # See https://github.com/PyCQA/pycodestyle/issues/472 - E402, - # Do not use variables named 'I', 'O', or 'l' - E741, - # Local variable name is assigned to but never used - F841, - # Do not call assert False since python -O removes these calls - B011, - -# B950 will only trigger at 88 -max-line-length = 80 - -[isort] -sections = FUTURE,STDLIB,THIRDPARTY,DISTRIBUTED,FIRSTPARTY,LOCALFOLDER -profile = black -skip_gitignore = true -force_to_top = true -default_section = THIRDPARTY -known_first_party = distributed -known_distributed = dask,zict -add_imports = from __future__ import annotations - -[versioneer] -VCS = git -style = pep440 -versionfile_source = distributed/_version.py -versionfile_build = distributed/_version.py -tag_prefix = -parentdir_prefix = distributed- - -[tool:pytest] -addopts = - -v -rsxfE - --durations=20 - --color=yes - --ignore=continuous_integration - --ignore=docs - --ignore=.github - --strict-markers - --strict-config - -p no:asyncio - -p no:legacypath -filterwarnings = - error - ignore:Please use `dok_matrix` from the `scipy\.sparse` namespace, the `scipy\.sparse\.dok` namespace is deprecated.:DeprecationWarning - ignore:elementwise comparison failed. this will raise an error in the future:DeprecationWarning - ignore:unclosed \.send_recv_from_rpc' was never awaited:RuntimeWarning - ignore:coroutine 'Scheduler\.restart' was never awaited:RuntimeWarning - ignore:coroutine 'Semaphore._refresh_leases' was never awaited:RuntimeWarning - ignore:coroutine 'ServerSession\.with_document_locked' was never awaited - ignore:overflow encountered in long_scalars:RuntimeWarning - ignore:Creating scratch directories is taking a surprisingly long time.*:UserWarning - ignore:Scheduler already contains a plugin with name nonidempotentplugin. overwriting:UserWarning - ignore:Increasing number of chunks by factor of 20::dask.array.core.PerformanceWarning - ignore::distributed.versions.VersionMismatchWarning - ignore:(?s)Exception in thread.*old_ssh.*channel\.send\(b"\\x03"\).*Socket is closed:pytest.PytestUnhandledThreadExceptionWarning - ignore:(?s)Exception in thread.*paramiko\.ssh_exception\.NoValidConnectionsError:pytest.PytestUnhandledThreadExceptionWarning - ignore:(?s)Exception ignored in. .*sem_unlink.*FileNotFoundError:pytest.PytestUnraisableExceptionWarning - ignore:(?s)Exception ignored in. = 3: - stdout = stdout.decode() - if p.returncode != 0: - if verbose: - print("unable to run %s (error)" % dispcmd) - print("stdout was %s" % stdout) - return None, p.returncode - return stdout, p.returncode -LONG_VERSION_PY['git'] = r''' -# This file helps to compute a version number in source trees obtained from -# git-archive tarball (such as those provided by githubs download-from-tag -# feature). Distribution tarballs (built by setup.py sdist) and build -# directories (produced by setup.py build) will contain a much shorter file -# that just contains the computed version number. - -# This file is released into the public domain. Generated by -# versioneer-0.17 (https://github.com/warner/python-versioneer) - -"""Git implementation of _version.py.""" - -import errno -import os -import re -import subprocess -import sys - - -def get_keywords(): - """Get the keywords needed to look up the version information.""" - # these strings will be replaced by git during git-archive. - # setup.py/versioneer.py will grep for the variable names, so they must - # each be defined on a line of their own. _version.py will just call - # get_keywords(). - git_refnames = "%(DOLLAR)sFormat:%%d%(DOLLAR)s" - git_full = "%(DOLLAR)sFormat:%%H%(DOLLAR)s" - git_date = "%(DOLLAR)sFormat:%%ci%(DOLLAR)s" - keywords = {"refnames": git_refnames, "full": git_full, "date": git_date} - return keywords - - -class VersioneerConfig: - """Container for Versioneer configuration parameters.""" - - -def get_config(): - """Create, populate and return the VersioneerConfig() object.""" - # these strings are filled in when 'setup.py versioneer' creates - # _version.py - cfg = VersioneerConfig() - cfg.VCS = "git" - cfg.style = "%(STYLE)s" - cfg.tag_prefix = "%(TAG_PREFIX)s" - cfg.parentdir_prefix = "%(PARENTDIR_PREFIX)s" - cfg.versionfile_source = "%(VERSIONFILE_SOURCE)s" - cfg.verbose = False - return cfg - - -class NotThisMethod(Exception): - """Exception raised if a method is not valid for the current scenario.""" - - -LONG_VERSION_PY = {} -HANDLERS = {} - - -def register_vcs_handler(vcs, method): # decorator - """Decorator to mark a method as the handler for a particular VCS.""" - def decorate(f): - """Store f in HANDLERS[vcs][method].""" - if vcs not in HANDLERS: - HANDLERS[vcs] = {} - HANDLERS[vcs][method] = f - return f - return decorate - - -def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, - env=None): - """Call the given command(s).""" - assert isinstance(commands, list) - p = None - for c in commands: - try: - dispcmd = str([c] + args) - # remember shell=False, so use git.cmd on windows, not just git - p = subprocess.Popen([c] + args, cwd=cwd, env=env, - stdout=subprocess.PIPE, - stderr=(subprocess.PIPE if hide_stderr - else None)) - break - except EnvironmentError: - e = sys.exc_info()[1] - if e.errno == errno.ENOENT: - continue - if verbose: - print("unable to run %%s" %% dispcmd) - print(e) - return None, None - else: - if verbose: - print("unable to find command, tried %%s" %% (commands,)) - return None, None - stdout = p.communicate()[0].strip() - if sys.version_info[0] >= 3: - stdout = stdout.decode() - if p.returncode != 0: - if verbose: - print("unable to run %%s (error)" %% dispcmd) - print("stdout was %%s" %% stdout) - return None, p.returncode - return stdout, p.returncode - - -def versions_from_parentdir(parentdir_prefix, root, verbose): - """Try to determine the version from the parent directory name. - - Source tarballs conventionally unpack into a directory that includes both - the project name and a version string. We will also support searching up - two directory levels for an appropriately named parent directory - """ - rootdirs = [] - - for i in range(3): - dirname = os.path.basename(root) - if dirname.startswith(parentdir_prefix): - return {"version": dirname[len(parentdir_prefix):], - "full-revisionid": None, - "dirty": False, "error": None, "date": None} - else: - rootdirs.append(root) - root = os.path.dirname(root) # up a level - - if verbose: - print("Tried directories %%s but none started with prefix %%s" %% - (str(rootdirs), parentdir_prefix)) - raise NotThisMethod("rootdir doesn't start with parentdir_prefix") - - -@register_vcs_handler("git", "get_keywords") -def git_get_keywords(versionfile_abs): - """Extract version information from the given file.""" - # the code embedded in _version.py can just fetch the value of these - # keywords. When used from setup.py, we don't want to import _version.py, - # so we do it with a regexp instead. This function is not used from - # _version.py. - keywords = {} - try: - f = open(versionfile_abs, "r") - for line in f.readlines(): - if line.strip().startswith("git_refnames ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["refnames"] = mo.group(1) - if line.strip().startswith("git_full ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["full"] = mo.group(1) - if line.strip().startswith("git_date ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["date"] = mo.group(1) - f.close() - except EnvironmentError: - pass - return keywords - - -@register_vcs_handler("git", "keywords") -def git_versions_from_keywords(keywords, tag_prefix, verbose): - """Get version information from git keywords.""" - if not keywords: - raise NotThisMethod("no keywords at all, weird") - date = keywords.get("date") - if date is not None: - # git-2.2.0 added "%%cI", which expands to an ISO-8601 -compliant - # datestamp. However we prefer "%%ci" (which expands to an "ISO-8601 - # -like" string, which we must then edit to make compliant), because - # it's been around since git-1.5.3, and it's too difficult to - # discover which version we're using, or to work around using an - # older one. - date = date.strip().replace(" ", "T", 1).replace(" ", "", 1) - refnames = keywords["refnames"].strip() - if refnames.startswith("$Format"): - if verbose: - print("keywords are unexpanded, not using") - raise NotThisMethod("unexpanded keywords, not a git-archive tarball") - refs = set([r.strip() for r in refnames.strip("()").split(",")]) - # starting in git-1.8.3, tags are listed as "tag: foo-1.0" instead of - # just "foo-1.0". If we see a "tag: " prefix, prefer those. - TAG = "tag: " - tags = set([r[len(TAG):] for r in refs if r.startswith(TAG)]) - if not tags: - # Either we're using git < 1.8.3, or there really are no tags. We use - # a heuristic: assume all version tags have a digit. The old git %%d - # expansion behaves like git log --decorate=short and strips out the - # refs/heads/ and refs/tags/ prefixes that would let us distinguish - # between branches and tags. By ignoring refnames without digits, we - # filter out many common branch names like "release" and - # "stabilization", as well as "HEAD" and "main". - tags = set([r for r in refs if re.search(r'\d', r)]) - if verbose: - print("discarding '%%s', no digits" %% ",".join(refs - tags)) - if verbose: - print("likely tags: %%s" %% ",".join(sorted(tags))) - for ref in sorted(tags): - # sorting will prefer e.g. "2.0" over "2.0rc1" - if ref.startswith(tag_prefix): - r = ref[len(tag_prefix):] - if verbose: - print("picking %%s" %% r) - return {"version": r, - "full-revisionid": keywords["full"].strip(), - "dirty": False, "error": None, - "date": date} - # no suitable tags, so version is "0+unknown", but full hex is still there - if verbose: - print("no suitable tags, using unknown + full revision id") - return {"version": "0+unknown", - "full-revisionid": keywords["full"].strip(), - "dirty": False, "error": "no suitable tags", "date": None} - - -@register_vcs_handler("git", "pieces_from_vcs") -def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): - """Get version from 'git describe' in the root of the source tree. - - This only gets called if the git-archive 'subst' keywords were *not* - expanded, and _version.py hasn't already been rewritten with a short - version string, meaning we're inside a checked out source tree. - """ - GITS = ["git"] - if sys.platform == "win32": - GITS = ["git.cmd", "git.exe"] - - out, rc = run_command(GITS, ["rev-parse", "--git-dir"], cwd=root, - hide_stderr=True) - if rc != 0: - if verbose: - print("Directory %%s not under git control" %% root) - raise NotThisMethod("'git rev-parse --git-dir' returned error") - - # if there is a tag matching tag_prefix, this yields TAG-NUM-gHEX[-dirty] - # if there isn't one, this yields HEX[-dirty] (no NUM) - describe_out, rc = run_command(GITS, ["describe", "--tags", "--dirty", - "--always", "--long", - "--match", "%%s*" %% tag_prefix], - cwd=root) - # --long was added in git-1.5.5 - if describe_out is None: - raise NotThisMethod("'git describe' failed") - describe_out = describe_out.strip() - full_out, rc = run_command(GITS, ["rev-parse", "HEAD"], cwd=root) - if full_out is None: - raise NotThisMethod("'git rev-parse' failed") - full_out = full_out.strip() - - pieces = {} - pieces["long"] = full_out - pieces["short"] = full_out[:7] # maybe improved later - pieces["error"] = None - - # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] - # TAG might have hyphens. - git_describe = describe_out - - # look for -dirty suffix - dirty = git_describe.endswith("-dirty") - pieces["dirty"] = dirty - if dirty: - git_describe = git_describe[:git_describe.rindex("-dirty")] - - # now we have TAG-NUM-gHEX or HEX - - if "-" in git_describe: - # TAG-NUM-gHEX - mo = re.search(r'^(.+)-(\d+)-g([0-9a-f]+)$', git_describe) - if not mo: - # unparseable. Maybe git-describe is misbehaving? - pieces["error"] = ("unable to parse git-describe output: '%%s'" - %% describe_out) - return pieces - - # tag - full_tag = mo.group(1) - if not full_tag.startswith(tag_prefix): - if verbose: - fmt = "tag '%%s' doesn't start with prefix '%%s'" - print(fmt %% (full_tag, tag_prefix)) - pieces["error"] = ("tag '%%s' doesn't start with prefix '%%s'" - %% (full_tag, tag_prefix)) - return pieces - pieces["closest-tag"] = full_tag[len(tag_prefix):] - - # distance: number of commits since tag - pieces["distance"] = int(mo.group(2)) - - # commit: short hex revision ID - pieces["short"] = mo.group(3) - - else: - # HEX: no tags - pieces["closest-tag"] = None - count_out, rc = run_command(GITS, ["rev-list", "HEAD", "--count"], - cwd=root) - pieces["distance"] = int(count_out) # total number of commits - - # commit date: see ISO-8601 comment in git_versions_from_keywords() - date = run_command(GITS, ["show", "-s", "--format=%%ci", "HEAD"], - cwd=root)[0].strip() - pieces["date"] = date.strip().replace(" ", "T", 1).replace(" ", "", 1) - - return pieces - - -def plus_or_dot(pieces): - """Return a + if we don't already have one, else return a .""" - if "+" in pieces.get("closest-tag", ""): - return "." - return "+" - - -def render_pep440(pieces): - """Build up version string, with post-release "local version identifier". - - Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you - get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty - - Exceptions: - 1: no tags. git_describe was just HEX. 0+untagged.DISTANCE.gHEX[.dirty] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += plus_or_dot(pieces) - rendered += "%%d.g%%s" %% (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - else: - # exception #1 - rendered = "0+untagged.%%d.g%%s" %% (pieces["distance"], - pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - return rendered - - -def render_pep440_pre(pieces): - """TAG[.post.devDISTANCE] -- No -dirty. - - Exceptions: - 1: no tags. 0.post.devDISTANCE - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"]: - rendered += ".post.dev%%d" %% pieces["distance"] - else: - # exception #1 - rendered = "0.post.dev%%d" %% pieces["distance"] - return rendered - - -def render_pep440_post(pieces): - """TAG[.postDISTANCE[.dev0]+gHEX] . - - The ".dev0" means dirty. Note that .dev0 sorts backwards - (a dirty tree will appear "older" than the corresponding clean one), - but you shouldn't be releasing software with -dirty anyways. - - Exceptions: - 1: no tags. 0.postDISTANCE[.dev0] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%%d" %% pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - rendered += plus_or_dot(pieces) - rendered += "g%%s" %% pieces["short"] - else: - # exception #1 - rendered = "0.post%%d" %% pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - rendered += "+g%%s" %% pieces["short"] - return rendered - - -def render_pep440_old(pieces): - """TAG[.postDISTANCE[.dev0]] . - - The ".dev0" means dirty. - - Eexceptions: - 1: no tags. 0.postDISTANCE[.dev0] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%%d" %% pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - else: - # exception #1 - rendered = "0.post%%d" %% pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - return rendered - - -def render_git_describe(pieces): - """TAG[-DISTANCE-gHEX][-dirty]. - - Like 'git describe --tags --dirty --always'. - - Exceptions: - 1: no tags. HEX[-dirty] (note: no 'g' prefix) - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"]: - rendered += "-%%d-g%%s" %% (pieces["distance"], pieces["short"]) - else: - # exception #1 - rendered = pieces["short"] - if pieces["dirty"]: - rendered += "-dirty" - return rendered - - -def render_git_describe_long(pieces): - """TAG-DISTANCE-gHEX[-dirty]. - - Like 'git describe --tags --dirty --always -long'. - The distance/hash is unconditional. - - Exceptions: - 1: no tags. HEX[-dirty] (note: no 'g' prefix) - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - rendered += "-%%d-g%%s" %% (pieces["distance"], pieces["short"]) - else: - # exception #1 - rendered = pieces["short"] - if pieces["dirty"]: - rendered += "-dirty" - return rendered - - -def render(pieces, style): - """Render the given version pieces into the requested style.""" - if pieces["error"]: - return {"version": "unknown", - "full-revisionid": pieces.get("long"), - "dirty": None, - "error": pieces["error"], - "date": None} - - if not style or style == "default": - style = "pep440" # the default - - if style == "pep440": - rendered = render_pep440(pieces) - elif style == "pep440-pre": - rendered = render_pep440_pre(pieces) - elif style == "pep440-post": - rendered = render_pep440_post(pieces) - elif style == "pep440-old": - rendered = render_pep440_old(pieces) - elif style == "git-describe": - rendered = render_git_describe(pieces) - elif style == "git-describe-long": - rendered = render_git_describe_long(pieces) - else: - raise ValueError("unknown style '%%s'" %% style) - - return {"version": rendered, "full-revisionid": pieces["long"], - "dirty": pieces["dirty"], "error": None, - "date": pieces.get("date")} - - -def get_versions(): - """Get version information or return default if unable to do so.""" - # I am in _version.py, which lives at ROOT/VERSIONFILE_SOURCE. If we have - # __file__, we can work backwards from there to the root. Some - # py2exe/bbfreeze/non-CPython implementations don't do __file__, in which - # case we can only use expanded keywords. - - cfg = get_config() - verbose = cfg.verbose - - try: - return git_versions_from_keywords(get_keywords(), cfg.tag_prefix, - verbose) - except NotThisMethod: - pass - - try: - root = os.path.realpath(__file__) - # versionfile_source is the relative path from the top of the source - # tree (where the .git directory might live) to this file. Invert - # this to find the root from __file__. - for i in cfg.versionfile_source.split('/'): - root = os.path.dirname(root) - except NameError: - return {"version": "0+unknown", "full-revisionid": None, - "dirty": None, - "error": "unable to find root of source tree", - "date": None} - - try: - pieces = git_pieces_from_vcs(cfg.tag_prefix, root, verbose) - return render(pieces, cfg.style) - except NotThisMethod: - pass - - try: - if cfg.parentdir_prefix: - return versions_from_parentdir(cfg.parentdir_prefix, root, verbose) - except NotThisMethod: - pass - - return {"version": "0+unknown", "full-revisionid": None, - "dirty": None, - "error": "unable to compute version", "date": None} -''' - - -@register_vcs_handler("git", "get_keywords") -def git_get_keywords(versionfile_abs): - """Extract version information from the given file.""" - # the code embedded in _version.py can just fetch the value of these - # keywords. When used from setup.py, we don't want to import _version.py, - # so we do it with a regexp instead. This function is not used from - # _version.py. - keywords = {} - try: - f = open(versionfile_abs) - for line in f.readlines(): - if line.strip().startswith("git_refnames ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["refnames"] = mo.group(1) - if line.strip().startswith("git_full ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["full"] = mo.group(1) - if line.strip().startswith("git_date ="): - mo = re.search(r'=\s*"(.*)"', line) - if mo: - keywords["date"] = mo.group(1) - f.close() - except OSError: - pass - return keywords - - -@register_vcs_handler("git", "keywords") -def git_versions_from_keywords(keywords, tag_prefix, verbose): - """Get version information from git keywords.""" - if not keywords: - raise NotThisMethod("no keywords at all, weird") - date = keywords.get("date") - if date is not None: - # git-2.2.0 added "%cI", which expands to an ISO-8601 -compliant - # datestamp. However we prefer "%ci" (which expands to an "ISO-8601 - # -like" string, which we must then edit to make compliant), because - # it's been around since git-1.5.3, and it's too difficult to - # discover which version we're using, or to work around using an - # older one. - date = date.strip().replace(" ", "T", 1).replace(" ", "", 1) - refnames = keywords["refnames"].strip() - if refnames.startswith("$Format"): - if verbose: - print("keywords are unexpanded, not using") - raise NotThisMethod("unexpanded keywords, not a git-archive tarball") - refs = {r.strip() for r in refnames.strip("()").split(",")} - # starting in git-1.8.3, tags are listed as "tag: foo-1.0" instead of - # just "foo-1.0". If we see a "tag: " prefix, prefer those. - TAG = "tag: " - tags = {r[len(TAG):] for r in refs if r.startswith(TAG)} - if not tags: - # Either we're using git < 1.8.3, or there really are no tags. We use - # a heuristic: assume all version tags have a digit. The old git %d - # expansion behaves like git log --decorate=short and strips out the - # refs/heads/ and refs/tags/ prefixes that would let us distinguish - # between branches and tags. By ignoring refnames without digits, we - # filter out many common branch names like "release" and - # "stabilization", as well as "HEAD" and "main". - tags = {r for r in refs if re.search(r'\d', r)} - if verbose: - print("discarding '%s', no digits" % ",".join(refs - tags)) - if verbose: - print("likely tags: %s" % ",".join(sorted(tags))) - for ref in sorted(tags): - # sorting will prefer e.g. "2.0" over "2.0rc1" - if ref.startswith(tag_prefix): - r = ref[len(tag_prefix):] - if verbose: - print("picking %s" % r) - return {"version": r, - "full-revisionid": keywords["full"].strip(), - "dirty": False, "error": None, - "date": date} - # no suitable tags, so version is "0+unknown", but full hex is still there - if verbose: - print("no suitable tags, using unknown + full revision id") - return {"version": "0+unknown", - "full-revisionid": keywords["full"].strip(), - "dirty": False, "error": "no suitable tags", "date": None} - - -@register_vcs_handler("git", "pieces_from_vcs") -def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): - """Get version from 'git describe' in the root of the source tree. - - This only gets called if the git-archive 'subst' keywords were *not* - expanded, and _version.py hasn't already been rewritten with a short - version string, meaning we're inside a checked out source tree. - """ - GITS = ["git"] - if sys.platform == "win32": - GITS = ["git.cmd", "git.exe"] - - out, rc = run_command(GITS, ["rev-parse", "--git-dir"], cwd=root, - hide_stderr=True) - if rc != 0: - if verbose: - print("Directory %s not under git control" % root) - raise NotThisMethod("'git rev-parse --git-dir' returned error") - - # if there is a tag matching tag_prefix, this yields TAG-NUM-gHEX[-dirty] - # if there isn't one, this yields HEX[-dirty] (no NUM) - describe_out, rc = run_command(GITS, ["describe", "--tags", "--dirty", - "--always", "--long", - "--match", "%s*" % tag_prefix], - cwd=root) - # --long was added in git-1.5.5 - if describe_out is None: - raise NotThisMethod("'git describe' failed") - describe_out = describe_out.strip() - full_out, rc = run_command(GITS, ["rev-parse", "HEAD"], cwd=root) - if full_out is None: - raise NotThisMethod("'git rev-parse' failed") - full_out = full_out.strip() - - pieces = {} - pieces["long"] = full_out - pieces["short"] = full_out[:7] # maybe improved later - pieces["error"] = None - - # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] - # TAG might have hyphens. - git_describe = describe_out - - # look for -dirty suffix - dirty = git_describe.endswith("-dirty") - pieces["dirty"] = dirty - if dirty: - git_describe = git_describe[:git_describe.rindex("-dirty")] - - # now we have TAG-NUM-gHEX or HEX - - if "-" in git_describe: - # TAG-NUM-gHEX - mo = re.search(r'^(.+)-(\d+)-g([0-9a-f]+)$', git_describe) - if not mo: - # unparseable. Maybe git-describe is misbehaving? - pieces["error"] = ("unable to parse git-describe output: '%s'" - % describe_out) - return pieces - - # tag - full_tag = mo.group(1) - if not full_tag.startswith(tag_prefix): - if verbose: - fmt = "tag '%s' doesn't start with prefix '%s'" - print(fmt % (full_tag, tag_prefix)) - pieces["error"] = ("tag '%s' doesn't start with prefix '%s'" - % (full_tag, tag_prefix)) - return pieces - pieces["closest-tag"] = full_tag[len(tag_prefix):] - - # distance: number of commits since tag - pieces["distance"] = int(mo.group(2)) - - # commit: short hex revision ID - pieces["short"] = mo.group(3) - - else: - # HEX: no tags - pieces["closest-tag"] = None - count_out, rc = run_command(GITS, ["rev-list", "HEAD", "--count"], - cwd=root) - pieces["distance"] = int(count_out) # total number of commits - - # commit date: see ISO-8601 comment in git_versions_from_keywords() - date = run_command(GITS, ["show", "-s", "--format=%ci", "HEAD"], - cwd=root)[0].strip() - pieces["date"] = date.strip().replace(" ", "T", 1).replace(" ", "", 1) - - return pieces - - -def do_vcs_install(manifest_in, versionfile_source, ipy): - """Git-specific installation logic for Versioneer. - - For Git, this means creating/changing .gitattributes to mark _version.py - for export-subst keyword substitution. - """ - GITS = ["git"] - if sys.platform == "win32": - GITS = ["git.cmd", "git.exe"] - files = [manifest_in, versionfile_source] - if ipy: - files.append(ipy) - try: - me = __file__ - if me.endswith(".pyc") or me.endswith(".pyo"): - me = os.path.splitext(me)[0] + ".py" - versioneer_file = os.path.relpath(me) - except NameError: - versioneer_file = "versioneer.py" - files.append(versioneer_file) - present = False - try: - f = open(".gitattributes") - for line in f.readlines(): - if line.strip().startswith(versionfile_source): - if "export-subst" in line.strip().split()[1:]: - present = True - f.close() - except OSError: - pass - if not present: - f = open(".gitattributes", "a+") - f.write("%s export-subst\n" % versionfile_source) - f.close() - files.append(".gitattributes") - run_command(GITS, ["add", "--"] + files) - - -def versions_from_parentdir(parentdir_prefix, root, verbose): - """Try to determine the version from the parent directory name. - - Source tarballs conventionally unpack into a directory that includes both - the project name and a version string. We will also support searching up - two directory levels for an appropriately named parent directory - """ - rootdirs = [] - - for i in range(3): - dirname = os.path.basename(root) - if dirname.startswith(parentdir_prefix): - return {"version": dirname[len(parentdir_prefix):], - "full-revisionid": None, - "dirty": False, "error": None, "date": None} - else: - rootdirs.append(root) - root = os.path.dirname(root) # up a level - - if verbose: - print("Tried directories %s but none started with prefix %s" % - (str(rootdirs), parentdir_prefix)) - raise NotThisMethod("rootdir doesn't start with parentdir_prefix") - -SHORT_VERSION_PY = """ -# This file was generated by 'versioneer.py' (0.17) from -# revision-control system data, or from the parent directory name of an -# unpacked source archive. Distribution tarballs contain a pre-generated copy -# of this file. - -import json - -version_json = ''' -%s -''' # END VERSION_JSON - - -def get_versions(): - return json.loads(version_json) -""" - - -def versions_from_file(filename): - """Try to determine the version from _version.py if present.""" - try: - with open(filename) as f: - contents = f.read() - except OSError: - raise NotThisMethod("unable to read _version.py") - mo = re.search(r"version_json = '''\n(.*)''' # END VERSION_JSON", - contents, re.M | re.S) - if not mo: - mo = re.search(r"version_json = '''\r\n(.*)''' # END VERSION_JSON", - contents, re.M | re.S) - if not mo: - raise NotThisMethod("no version_json in _version.py") - return json.loads(mo.group(1)) - - -def write_to_version_file(filename, versions): - """Write the given version number to the given _version.py file.""" - os.unlink(filename) - contents = json.dumps(versions, sort_keys=True, - indent=1, separators=(",", ": ")) - with open(filename, "w") as f: - f.write(SHORT_VERSION_PY % contents) - - print("set {} to '{}'".format(filename, versions["version"])) - - -def plus_or_dot(pieces): - """Return a + if we don't already have one, else return a .""" - if "+" in pieces.get("closest-tag", ""): - return "." - return "+" - - -def render_pep440(pieces): - """Build up version string, with post-release "local version identifier". - - Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you - get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty - - Exceptions: - 1: no tags. git_describe was just HEX. 0+untagged.DISTANCE.gHEX[.dirty] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += plus_or_dot(pieces) - rendered += "%d.g%s" % (pieces["distance"], pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - else: - # exception #1 - rendered = "0+untagged.%d.g%s" % (pieces["distance"], - pieces["short"]) - if pieces["dirty"]: - rendered += ".dirty" - return rendered - - -def render_pep440_pre(pieces): - """TAG[.post.devDISTANCE] -- No -dirty. - - Exceptions: - 1: no tags. 0.post.devDISTANCE - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"]: - rendered += ".post.dev%d" % pieces["distance"] - else: - # exception #1 - rendered = "0.post.dev%d" % pieces["distance"] - return rendered - - -def render_pep440_post(pieces): - """TAG[.postDISTANCE[.dev0]+gHEX] . - - The ".dev0" means dirty. Note that .dev0 sorts backwards - (a dirty tree will appear "older" than the corresponding clean one), - but you shouldn't be releasing software with -dirty anyways. - - Exceptions: - 1: no tags. 0.postDISTANCE[.dev0] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - rendered += plus_or_dot(pieces) - rendered += "g%s" % pieces["short"] - else: - # exception #1 - rendered = "0.post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - rendered += "+g%s" % pieces["short"] - return rendered - - -def render_pep440_old(pieces): - """TAG[.postDISTANCE[.dev0]] . - - The ".dev0" means dirty. - - Eexceptions: - 1: no tags. 0.postDISTANCE[.dev0] - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"] or pieces["dirty"]: - rendered += ".post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - else: - # exception #1 - rendered = "0.post%d" % pieces["distance"] - if pieces["dirty"]: - rendered += ".dev0" - return rendered - - -def render_git_describe(pieces): - """TAG[-DISTANCE-gHEX][-dirty]. - - Like 'git describe --tags --dirty --always'. - - Exceptions: - 1: no tags. HEX[-dirty] (note: no 'g' prefix) - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - if pieces["distance"]: - rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) - else: - # exception #1 - rendered = pieces["short"] - if pieces["dirty"]: - rendered += "-dirty" - return rendered - - -def render_git_describe_long(pieces): - """TAG-DISTANCE-gHEX[-dirty]. - - Like 'git describe --tags --dirty --always -long'. - The distance/hash is unconditional. - - Exceptions: - 1: no tags. HEX[-dirty] (note: no 'g' prefix) - """ - if pieces["closest-tag"]: - rendered = pieces["closest-tag"] - rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) - else: - # exception #1 - rendered = pieces["short"] - if pieces["dirty"]: - rendered += "-dirty" - return rendered - - -def render(pieces, style): - """Render the given version pieces into the requested style.""" - if pieces["error"]: - return {"version": "unknown", - "full-revisionid": pieces.get("long"), - "dirty": None, - "error": pieces["error"], - "date": None} - - if not style or style == "default": - style = "pep440" # the default - - if style == "pep440": - rendered = render_pep440(pieces) - elif style == "pep440-pre": - rendered = render_pep440_pre(pieces) - elif style == "pep440-post": - rendered = render_pep440_post(pieces) - elif style == "pep440-old": - rendered = render_pep440_old(pieces) - elif style == "git-describe": - rendered = render_git_describe(pieces) - elif style == "git-describe-long": - rendered = render_git_describe_long(pieces) - else: - raise ValueError("unknown style '%s'" % style) - - return {"version": rendered, "full-revisionid": pieces["long"], - "dirty": pieces["dirty"], "error": None, - "date": pieces.get("date")} - - -class VersioneerBadRootError(Exception): - """The project root directory is unknown or missing key files.""" - - -def get_versions(verbose=False): - """Get the project version from whatever source is available. - - Returns dict with two keys: 'version' and 'full'. - """ - if "versioneer" in sys.modules: - # see the discussion in cmdclass.py:get_cmdclass() - del sys.modules["versioneer"] - - root = get_root() - cfg = get_config_from_root(root) - - assert cfg.VCS is not None, "please set [versioneer]VCS= in setup.cfg" - handlers = HANDLERS.get(cfg.VCS) - assert handlers, "unrecognized VCS '%s'" % cfg.VCS - verbose = verbose or cfg.verbose - assert cfg.versionfile_source is not None, \ - "please set versioneer.versionfile_source" - assert cfg.tag_prefix is not None, "please set versioneer.tag_prefix" - - versionfile_abs = os.path.join(root, cfg.versionfile_source) - - # extract version from first of: _version.py, VCS command (e.g. 'git - # describe'), parentdir. This is meant to work for developers using a - # source checkout, for users of a tarball created by 'setup.py sdist', - # and for users of a tarball/zipball created by 'git archive' or github's - # download-from-tag feature or the equivalent in other VCSes. - - get_keywords_f = handlers.get("get_keywords") - from_keywords_f = handlers.get("keywords") - if get_keywords_f and from_keywords_f: - try: - keywords = get_keywords_f(versionfile_abs) - ver = from_keywords_f(keywords, cfg.tag_prefix, verbose) - if verbose: - print("got version from expanded keyword %s" % ver) - return ver - except NotThisMethod: - pass - - try: - ver = versions_from_file(versionfile_abs) - if verbose: - print(f"got version from file {versionfile_abs} {ver}") - return ver - except NotThisMethod: - pass - - from_vcs_f = handlers.get("pieces_from_vcs") - if from_vcs_f: - try: - pieces = from_vcs_f(cfg.tag_prefix, root, verbose) - ver = render(pieces, cfg.style) - if verbose: - print("got version from VCS %s" % ver) - return ver - except NotThisMethod: - pass - - try: - if cfg.parentdir_prefix: - ver = versions_from_parentdir(cfg.parentdir_prefix, root, verbose) - if verbose: - print("got version from parentdir %s" % ver) - return ver - except NotThisMethod: - pass - - if verbose: - print("unable to compute version") - - return {"version": "0+unknown", "full-revisionid": None, - "dirty": None, "error": "unable to compute version", - "date": None} - - -def get_version(): - """Get the short version string for this project.""" - return get_versions()["version"] - - -def get_cmdclass(): - """Get the custom setuptools/distutils subclasses used by Versioneer.""" - if "versioneer" in sys.modules: - del sys.modules["versioneer"] - # this fixes the "python setup.py develop" case (also 'install' and - # 'easy_install .'), in which subdependencies of the main project are - # built (using setup.py bdist_egg) in the same python process. Assume - # a main project A and a dependency B, which use different versions - # of Versioneer. A's setup.py imports A's Versioneer, leaving it in - # sys.modules by the time B's setup.py is executed, causing B to run - # with the wrong versioneer. Setuptools wraps the sub-dep builds in a - # sandbox that restores sys.modules to it's pre-build state, so the - # parent is protected against the child's "import versioneer". By - # removing ourselves from sys.modules here, before the child build - # happens, we protect the child from the parent's versioneer too. - # Also see https://github.com/warner/python-versioneer/issues/52 - - cmds = {} - - # we add "version" to both distutils and setuptools - from distutils.core import Command - - class cmd_version(Command): - description = "report generated version string" - user_options = [] - boolean_options = [] - - def initialize_options(self): - pass - - def finalize_options(self): - pass - - def run(self): - vers = get_versions(verbose=True) - print("Version: %s" % vers["version"]) - print(" full-revisionid: %s" % vers.get("full-revisionid")) - print(" dirty: %s" % vers.get("dirty")) - print(" date: %s" % vers.get("date")) - if vers["error"]: - print(" error: %s" % vers["error"]) - cmds["version"] = cmd_version - - # we override "build_py" in both distutils and setuptools - # - # most invocation pathways end up running build_py: - # distutils/build -> build_py - # distutils/install -> distutils/build ->.. - # setuptools/bdist_wheel -> distutils/install ->.. - # setuptools/bdist_egg -> distutils/install_lib -> build_py - # setuptools/install -> bdist_egg ->.. - # setuptools/develop -> ? - # pip install: - # copies source tree to a tempdir before running egg_info/etc - # if .git isn't copied too, 'git describe' will fail - # then does setup.py bdist_wheel, or sometimes setup.py install - # setup.py egg_info -> ? - - # we override different "build_py" commands for both environments - if "setuptools" in sys.modules: - from setuptools.command.build_py import build_py as _build_py - else: - from distutils.command.build_py import build_py as _build_py - - class cmd_build_py(_build_py): - def run(self): - root = get_root() - cfg = get_config_from_root(root) - versions = get_versions() - _build_py.run(self) - # now locate _version.py in the new build/ directory and replace - # it with an updated value - if cfg.versionfile_build: - target_versionfile = os.path.join(self.build_lib, - cfg.versionfile_build) - print("UPDATING %s" % target_versionfile) - write_to_version_file(target_versionfile, versions) - cmds["build_py"] = cmd_build_py - - if "cx_Freeze" in sys.modules: # cx_freeze enabled? - from cx_Freeze.dist import build_exe as _build_exe - - # nczeczulin reports that py2exe won't like the pep440-style string - # as FILEVERSION, but it can be used for PRODUCTVERSION, e.g. - # setup(console=[{ - # "version": versioneer.get_version().split("+", 1)[0], # FILEVERSION - # "product_version": versioneer.get_version(), - # ... - - class cmd_build_exe(_build_exe): - def run(self): - root = get_root() - cfg = get_config_from_root(root) - versions = get_versions() - target_versionfile = cfg.versionfile_source - print("UPDATING %s" % target_versionfile) - write_to_version_file(target_versionfile, versions) - - _build_exe.run(self) - os.unlink(target_versionfile) - with open(cfg.versionfile_source, "w") as f: - LONG = LONG_VERSION_PY[cfg.VCS] - f.write(LONG % - {"DOLLAR": "$", - "STYLE": cfg.style, - "TAG_PREFIX": cfg.tag_prefix, - "PARENTDIR_PREFIX": cfg.parentdir_prefix, - "VERSIONFILE_SOURCE": cfg.versionfile_source, - }) - cmds["build_exe"] = cmd_build_exe - del cmds["build_py"] - - if 'py2exe' in sys.modules: # py2exe enabled? - try: - from py2exe.distutils_buildexe import py2exe as _py2exe # py3 - except ImportError: - from py2exe.build_exe import py2exe as _py2exe # py2 - - class cmd_py2exe(_py2exe): - def run(self): - root = get_root() - cfg = get_config_from_root(root) - versions = get_versions() - target_versionfile = cfg.versionfile_source - print("UPDATING %s" % target_versionfile) - write_to_version_file(target_versionfile, versions) - - _py2exe.run(self) - os.unlink(target_versionfile) - with open(cfg.versionfile_source, "w") as f: - LONG = LONG_VERSION_PY[cfg.VCS] - f.write(LONG % - {"DOLLAR": "$", - "STYLE": cfg.style, - "TAG_PREFIX": cfg.tag_prefix, - "PARENTDIR_PREFIX": cfg.parentdir_prefix, - "VERSIONFILE_SOURCE": cfg.versionfile_source, - }) - cmds["py2exe"] = cmd_py2exe - - # we override different "sdist" commands for both environments - if "setuptools" in sys.modules: - from setuptools.command.sdist import sdist as _sdist - else: - from distutils.command.sdist import sdist as _sdist - - class cmd_sdist(_sdist): - def run(self): - versions = get_versions() - self._versioneer_generated_versions = versions - # unless we update this, the command will keep using the old - # version - self.distribution.metadata.version = versions["version"] - return _sdist.run(self) - - def make_release_tree(self, base_dir, files): - root = get_root() - cfg = get_config_from_root(root) - _sdist.make_release_tree(self, base_dir, files) - # now locate _version.py in the new base_dir directory - # (remembering that it may be a hardlink) and replace it with an - # updated value - target_versionfile = os.path.join(base_dir, cfg.versionfile_source) - print("UPDATING %s" % target_versionfile) - write_to_version_file(target_versionfile, - self._versioneer_generated_versions) - cmds["sdist"] = cmd_sdist - - return cmds - - -CONFIG_ERROR = """ -setup.cfg is missing the necessary Versioneer configuration. You need -a section like: - - [versioneer] - VCS = git - style = pep440 - versionfile_source = src/myproject/_version.py - versionfile_build = myproject/_version.py - tag_prefix = - parentdir_prefix = myproject- - -You will also need to edit your setup.py to use the results: - - import versioneer - setup(version=versioneer.get_version(), - cmdclass=versioneer.get_cmdclass(), ...) - -Please read the docstring in ./versioneer.py for configuration instructions, -edit setup.cfg, and re-run the installer or 'python versioneer.py setup'. -""" - -SAMPLE_CONFIG = """ -# See the docstring in versioneer.py for instructions. Note that you must -# re-run 'versioneer.py setup' after changing this section, and commit the -# resulting files. - -[versioneer] -#VCS = git -#style = pep440 -#versionfile_source = -#versionfile_build = -#tag_prefix = -#parentdir_prefix = - -""" - -INIT_PY_SNIPPET = """ -from ._version import get_versions -__version__ = get_versions()['version'] -del get_versions -""" - - -def do_setup(): - """Main VCS-independent setup function for installing Versioneer.""" - root = get_root() - try: - cfg = get_config_from_root(root) - except (OSError, configparser.NoSectionError, configparser.NoOptionError) as e: - if isinstance(e, (EnvironmentError, configparser.NoSectionError)): - print("Adding sample versioneer config to setup.cfg", - file=sys.stderr) - with open(os.path.join(root, "setup.cfg"), "a") as f: - f.write(SAMPLE_CONFIG) - print(CONFIG_ERROR, file=sys.stderr) - return 1 - - print(" creating %s" % cfg.versionfile_source) - with open(cfg.versionfile_source, "w") as f: - LONG = LONG_VERSION_PY[cfg.VCS] - f.write(LONG % {"DOLLAR": "$", - "STYLE": cfg.style, - "TAG_PREFIX": cfg.tag_prefix, - "PARENTDIR_PREFIX": cfg.parentdir_prefix, - "VERSIONFILE_SOURCE": cfg.versionfile_source, - }) - - ipy = os.path.join(os.path.dirname(cfg.versionfile_source), - "__init__.py") - if os.path.exists(ipy): - try: - with open(ipy) as f: - old = f.read() - except OSError: - old = "" - if INIT_PY_SNIPPET not in old: - print(" appending to %s" % ipy) - with open(ipy, "a") as f: - f.write(INIT_PY_SNIPPET) - else: - print(" %s unmodified" % ipy) - else: - print(" %s doesn't exist, ok" % ipy) - ipy = None - - # Make sure both the top-level "versioneer.py" and versionfile_source - # (PKG/_version.py, used by runtime code) are in MANIFEST.in, so - # they'll be copied into source distributions. Pip won't be able to - # install the package without this. - manifest_in = os.path.join(root, "MANIFEST.in") - simple_includes = set() - try: - with open(manifest_in) as f: - for line in f: - if line.startswith("include "): - for include in line.split()[1:]: - simple_includes.add(include) - except OSError: - pass - # That doesn't cover everything MANIFEST.in can do - # (http://docs.python.org/2/distutils/sourcedist.html#commands), so - # it might give some false negatives. Appending redundant 'include' - # lines is safe, though. - if "versioneer.py" not in simple_includes: - print(" appending 'versioneer.py' to MANIFEST.in") - with open(manifest_in, "a") as f: - f.write("include versioneer.py\n") - else: - print(" 'versioneer.py' already in MANIFEST.in") - if cfg.versionfile_source not in simple_includes: - print(" appending versionfile_source ('%s') to MANIFEST.in" % - cfg.versionfile_source) - with open(manifest_in, "a") as f: - f.write("include %s\n" % cfg.versionfile_source) - else: - print(" versionfile_source already in MANIFEST.in") - - # Make VCS-specific changes. For git, this means creating/changing - # .gitattributes to mark _version.py for export-subst keyword - # substitution. - do_vcs_install(manifest_in, cfg.versionfile_source, ipy) - return 0 - - -def scan_setup_py(): - """Validate the contents of setup.py against Versioneer's expectations.""" - found = set() - setters = False - errors = 0 - with open("setup.py") as f: - for line in f.readlines(): - if "import versioneer" in line: - found.add("import") - if "versioneer.get_cmdclass()" in line: - found.add("cmdclass") - if "versioneer.get_version()" in line: - found.add("get_version") - if "versioneer.VCS" in line: - setters = True - if "versioneer.versionfile_source" in line: - setters = True - if len(found) != 3: - print("") - print("Your setup.py appears to be missing some important items") - print("(but I might be wrong). Please make sure it has something") - print("roughly like the following:") - print("") - print(" import versioneer") - print(" setup( version=versioneer.get_version(),") - print(" cmdclass=versioneer.get_cmdclass(), ...)") - print("") - errors += 1 - if setters: - print("You should remove lines like 'versioneer.VCS = ' and") - print("'versioneer.versionfile_source = ' . This configuration") - print("now lives in setup.cfg, and should be removed from setup.py") - print("") - errors += 1 - return errors - -if __name__ == "__main__": - cmd = sys.argv[1] - if cmd == "setup": - errors = do_setup() - errors += scan_setup_py() - if errors: - sys.exit(1)