Skip to content

Latest commit

 

History

History
207 lines (136 loc) · 8.36 KB

README.md

File metadata and controls

207 lines (136 loc) · 8.36 KB
Raw

tidal_flat

A zero-dimensional morphodynamic model of elevation change on a tidal platform.

Visitors

About this project

This project uses a zero-dimensional mass balance approach to model the elevation of a tidal platform over time. This work is based on previous studies (Krone, 1987; Allen, 1990; French, 1993; Temmerman et al., 2003, 2004) on the long-term evolution of marsh surfaces. We describe the fundamentals of the model briefly.

The depth of inundation of a tidal platform is defined as

$$h(t) = \zeta(t) - \eta(t),$$

where $\zeta(t)$ is the water-surface elevation and $\eta(t)$ is the sediment-surface elevation. The rate of elevation change of the platform is then described as

$$\frac{d\eta(t)}{dt} = \frac{dS_m(t)}{dt} + \frac{dS_o(t)}{dt} + \frac{dP(t)}{dt} + \frac{dM(t)}{dt},$$

where $dSm(t)/dt$ is the rate of mineral sedimentation, $dSo(t)/dt$ is the rate of organic matter sedimentation, $dP(t)/dt$ is the rate of shallow compaction, and $dM(t)/dt$ is the rate of subsidence due to tectonics and deep compaction.

The full description will be described in Chris Tasich's upcoming dissertation.

Installation

Requirements

Source code

First make sure Git LFS is installed.

git lfs install

Afterwards, use git to clone this repository into your computer.

git clone https://github.com/christasich/tidal_flat.git

Then navigate inside the cloned repository and install the environment.

cd tidal_flat/
poetry install         # include the flag "--extras jupyter" to enable support for Jupyter Notebooks

Usage

This section is also included as a notebook under the example directory.

Before starting, ensure that your working directory is set to the root of the cloned repository.

Import pandas (to load the data) and the tidal_flat module.

import pandas as pd
import tidal_flat as tf

Load a tidal time series into pandas. The time series must have a defined frequency or one that can be inferred from the data. We can use our sample data found in example/tides.csv. Because pd.read_csv does not set the frequency, we recreate the pd.DatetimeIndex and tell pandas to infer the frequency.

Note: This data set was based on five years of observations. A harmonic analysis was then used to create an extended tide record using UTide.

data = pd.read_csv(
    "example/tides.csv",
    index_col="datetime",
    parse_dates=True,
    infer_datetime_format=True,
).squeeze()
data.index = pd.DatetimeIndex(data.index, freq="infer")

We can then create a tide object from this time series.

tides = tf.Tides(data)

The tides class has some useful functions like summarize which calculates the tidal datums defined by NOAA. You can specify a frequency string to calculate at different intervals.

tides.summarize(freq="A")

There are also functions to change sea level, amplify the tides, or take slices of the data.

tides.raise_sea_level(slr=0.005)  # raise sea level by 5 mm/yr
tides.amplify(factor=1.25)  # amplify the tides by a factor of 1.25
tides.subset(start="2023", end="2025")  # subset three years of data from 2023 to 2025

Each function returns a copy of your tide object. This is useful for modeling changes to the tides or creating a subset without having to rebuild or reload them from scratch! These can also be chained together like this.

tides = (
    tides.amplify(factor=1.25)
    .raise_sea_level(slr=0.003)
    .subset(start="2023", end="2025")
)

Now, we initialize our platform.

platform = tf.platform.Platform(time_ref=tides.start, elevation_ref=2.0)

The platform class mostly keeps track of the history of the platform. We have to evolve it before it can really tell us anything interesting!

Note: Both arguments are optional, but it's sometimes useful for consistency between runs or if you want to extend a simulation by using the same tide curve from the beginning.

We can then initialize and run our model by passing the tides and platform to our model class along with a handful of parameters. A number of these parameters are optional. It's sometimes useful to exclude the other annual rates (organic matter, compaction, deep subsidence) from the model. For instance, you may want to simulate relative sea level rise. In this case, compaction and subsidence should be set to zero since they will be captured through an increase in the tidal water levels.

model = tf.model.Model(
    tides=tides,
    platform=platform,
    ssc=0.2,  # g/L
    grain_diameter=2.5e-5,  # m
    bulk_density=1e3,  # g/cm^3
    grain_density=2.65e3,  # g/cm^3    [Optional] default is the density of a quartz grain
    org_sed=0.0,  # m/yr      [Optional]
    compaction=7e-3,  # m/yr      [Optional]
    deep_sub=3e-3,  # m/yr      [Optional]
)
model.run()

Once the model is finished we can get the results like this.

results = model.summarize()

The results returns two dataframes in Bunch object.

results.platform shows the total aggradation, total subsidence, total net surface elevation change, and surface elevation at each time step.

We can plot our results to show the change during our simulation. Let's plot the elevation of the platform and high water levels by month. This will allow us to see the seasonal signal in our data. We'll need two additional packages (matplotlib and seaborn) to make plotting easier.

import matplotlib.pyplot as plt
import seaborn as sns

freq = "M"

monthly_platform = results.platform.resample(freq).mean()
monthly_tides = model.tides.summarize(freq)

fig, ax = plt.subplots(figsize=(10, 5))

sns.lineplot(data=monthly_platform.elevation, color="black", label="platform", ax=ax)
sns.lineplot(
    data=monthly_tides[["MHHW", "MHW"]], ax=ax
)  # only plot mean high water and mean higher high water
ax.get_legend().set_title("")  # remove legend title

results.inundations shows the characteristics of each inundation along with a few diagnostic variables. This is useful for tracking how inundations are changing through time as water level changes.

Future plans

This package is actively being developed. Only the bare essentials have been documented here. We have a handful of other classes and functions that we have yet to expose. For instance, you may want to run a variety of platform conditions (I know we did!). Organizing this and keeping tracking of the results can become tedious. We use a combination of multiprocessing and yaml based configuration files to accomplish this. We've also implemented logging through loguru that we have yet to document.

License

MIT

Report an issue / Ask a question

Use the GitLab repository Issues.

Sources

Allen, J. R. L. (Nov. 1, 1990). “Salt-Marsh Growth and Stratification: A Numerical Model with Special Reference to the Severn Estuary, Southwest Britain”. In: Marine Geology 95.2, pp. 77–96.

French, Jonathan R. (1993). “Numerical Simulation of Vertical Marsh Growth and Adjustment to Accelerated Sea-Level Rise, North Norfolk, U.K.” In: Earth Surface Processes and Landforms 18.1, pp. 63–81.

Krone, R.B. (1987). “A Method for Simulating Marsh Elevations”. In: Coastal Sediments. A Specialty Conference on Advances in Understanding of Coastal Sediment Processes. New Orleans, Louisiana: American Society of Civil Engineers, pp. 316–323

Temmerman, S. et al. (Jan. 15, 2003). “Modelling Long-Term Tidal Marsh Growth under Changing Tidal Conditions and Suspended Sediment Concentrations, Scheldt Estuary, Belgium”. In: Marine Geology 193.1, pp. 151–169.

Temmerman, S. et al. (Nov. 30, 2004). “Modelling Estuarine Variations in Tidal Marsh Sedimentation: Response to Changing Sea Level and Suspended Sediment Concentrations”. In: Marine Geology 212.1, pp. 1–19.