Dalli is a high performance pure Ruby client for accessing memcached servers. It works with memcached 1.4+ only as it uses the newer binary protocol. It should be considered a replacement for the memcache-client gem.
The name is a variant of Salvador Dali for his famous painting The Persistence of Memory.
Dalli's initial development was sponsored by CouchBase. Many thanks to them!
Dalli should work identically on:
- JRuby 1.6+
- Ruby 1.9.3+
- Rubinius 2.0
If you have problems, please enter an issue.
Remember, Dalli requires memcached 1.4+. You can check the version with memcached -h. Please note that the memcached version that Mac OS X Snow Leopard ships with is 1.2.8 and it won't work. Install memcached 1.4.x using Homebrew with
brew install memcached
On Ubuntu you can install it by running:
apt-get install memcached
You can verify your installation using this piece of code:
gem install dallirequire 'dalli'
options = { :namespace => "app_v1", :compress => true }
dc = Dalli::Client.new('localhost:11211', options)
dc.set('abc', 123)
value = dc.get('abc')The test suite requires memcached 1.4.3+ with SASL enabled (brew install memcached --enable-sasl ; mv /usr/bin/memcached /usr/bin/memcached.old). Currently only supports the PLAIN mechanism.
Dalli has no runtime dependencies.
servers: An Array of "host:port:weight" where weight allows you to distribute cache unevenly.
Dalli::Client accepts the following options. All times are in seconds.
expires_in: Global default for key TTL. Default is 0, which means no expiry.
namespace: If specified, prepends each key with this value to provide simple namespacing. Default is nil.
failover: Boolean, if true Dalli will failover to another server if the main server for a key is down. Default is true.
threadsafe: Boolean. If true Dalli ensures that only one thread is using a socket at a given time. Default is true. You can set to false if you are using the Client within a thread-safe connection pool.
serializer: The serializer to use for objects being stored (ex. JSON). Default is Marshal.
compress: Boolean, if true Dalli will gzip-compress values larger than 1K. Default is false.
compression_min_size: Minimum value byte size for which to attempt compression. Default is 1K.
compression_max_size: Maximum value byte size for which to attempt compression. Default is unlimited.
compressor: The compressor to use for objects being stored.
Default is zlib, implemented under Dalli::Compressor.
If serving compressed data using nginx's HttpMemcachedModule, set memcached_gzip_flag 2 and use Dalli::GzipCompressor
keepalive: Boolean. If true, Dalli will enable keep-alive for socket connections. Default is true.
socket_timeout: Timeout for all socket operations (connect, read, write). Default is 1.
socket_max_failures: When a socket operation fails after socket_timeout, the same operation is retried. This is to not immediately mark a server down when there's a very slight network problem. Default is 2.
socket_failure_delay: Before retrying a socket operation, the process sleeps for this amount of time. Default is 0.1. Set to nil for no delay.
down_retry_delay: When a server has been marked down due to many failures, the server will be checked again for being alive only after this amount of time. Don't set this value too low, otherwise each request which tries the failed server might hang for the maximum socket_timeout. Default is 30 seconds.
value_max_bytes: The maximum size of a value in memcached. Defaults to 1MB, this can be increased with memcached's -I parameter. You must also configure Dalli to allow the larger size here.
error_when_over_max_size: Boolean. If true, Dalli will throw a Dalli::ValueOverMaxSize exception when trying to store data larger than value_max_bytes. Defaults to false, meaning only a warning is logged.
username: The username to use for authenticating this client instance against a SASL-enabled memcached server. Heroku users should not need to use this normally.
password: The password to use for authenticating this client instance against a SASL-enabled memcached server. Heroku users should not need to use this normally.
sndbuf: In bytes, set the socket SO_SNDBUF. Defaults to operating system default.
rcvbuf: In bytes, set the socket SO_RCVBUF. Defaults to operating system default.
cache_nils: Boolean. If true Dalli will not treat cached nil values as 'not found' for #fetch operations. Default is false.
raise_errors: Boolean. When true DalliStore will reraise Dalli:DalliError instead swallowing the error. Default is false.
instrument_errors: Boolean. When true DalliStore will send notification of Dalli::DalliError via a 'cache_error.active_support' event. Default is false.
By default, Dalli is thread-safe. Disable thread-safety at your own peril.
Dalli does not need anything special in Unicorn/Passenger since 2.0.4. It will detect sockets shared with child processes and gracefully reopen the socket.
Note that Dalli does not require ActiveSupport or Rails. You can safely use it in your own Ruby projects.
If you have a fix you wish to provide, please fork the code, fix in your local project and then send a pull request on github. Please ensure that you include a test which verifies your fix and update History.md with a one sentence description of your fix so you get credit as a contributor.
We're not accepting new compressors. They are trivial to add in an initializer. See #385 (LZ4), #406 (Snappy)
Mike Perham - for originally authoring the Dalli project and serving as maintainer and primary contributor
Eric Wong - for help using his kgio library.
Brian Mitchell - for his remix-stash project which was helpful when implementing and testing the binary protocol support.
CouchBase - for their project sponsorship
- Peter M. Goldstein - current maintainer
- Mike Perham and contributors
Copyright (c) Mike Perham, Peter M. Goldstein. See LICENSE for details.