Batocera 40 drops to cli , xorg logs says no screens found

[patricioperezv]

Batocera build version

40 2024/08/01 01:28

Your architecture

X86_64

Your Graphic Processor Unit(s) (GPU)

Integrated Intel UHD 600

Issue description

I have a black screen after splash screen and drops to cli, Xorg log says that no screens can be found.

Detailed reproduction steps

1. Downloaded batocera (batocera-x86_64-40-20240801.img.gz), checked the sha256 sum and it checks out correctly
2. Installed batocera (batocera-x86_64-40-20240801.img.gz) into a sd card using balena etcher
3. Booted from the sdcard, batocera splash is shown
4. Errors are shown (too quickly) then dropped to cli

Details of any attempts to fix this yourself

I tried to check why, did an lsmod and it shows no modules loaded (i expected i915 to be in there).
Manually running modprobe i915 says that module i915 can't be found on directory /lib/modules/6.4.16, when checking /lib/modules i only see a folder for 6.9.10, so, maybe the bundled kernel version doesn't match the bundled kernel modules?

Details of any modifications you have made to Batocera.

Didn't do any changes to batocera

Logs and data

batocera-support-20240930015206.tar.gz

[patricioperezv]

Tried with batocera-x86_64-x86_64-39-20240304.img.gz and the same things happen, different module versions/kernel but same thing.
This works correctly on 38, i'll try upgrading to see if it works correctly batocera-x86_64-x86_64-38-20231014.img.gz

[dmanlfc]

Provide a support file as per the issues template.

[patricioperezv]

@dmanlfc i've updated the ticket to add the logs, it was a little bit difficult since wifi nor ethernet connectivity are working

[dmanlfc]

The support file doesn't give me much information to work with unfortunately. This could be a kernel problem since v38 but I'm not sure since my older legacy Intel device works here. Can you try v41 ?

[patricioperezv]

Sure, I'll try v41 and see how it goes