From 2340fc00e4da98ebda92deb5aea05dfb2117a870 Mon Sep 17 00:00:00 2001 From: Aaron Markham Date: Fri, 12 Jul 2019 10:23:08 -0700 Subject: [PATCH 1/2] refine directions --- docs/install/install-jetson.md | 65 ++++++++++++++++++---------------- 1 file changed, 34 insertions(+), 31 deletions(-) diff --git a/docs/install/install-jetson.md b/docs/install/install-jetson.md index 6b0d65060342..18376d1d2ad9 100644 --- a/docs/install/install-jetson.md +++ b/docs/install/install-jetson.md @@ -19,13 +19,12 @@ MXNet supports the Ubuntu Arch64 based operating system so you can run MXNet on NVIDIA Jetson Devices, such as the [TX2](http://www.nvidia.com/object/embedded-systems-dev-kits-modules.html) or [Nano](https://developer.nvidia.com/embedded/learn/get-started-jetson-nano-devkit). -These instructions will walk through how to build MXNet and install MXNet's Python language binding. +These instructions will walk through how to build MXNet and install MXNet's Python language binding. For the purposes of this install guide we will assume that CUDA is already installed on your Jetson device. The disk image provided by NVIDIA's getting started guides will have the Jetson toolkit preinstalled, and this also includes CUDA. You should double check what versions are installed and which version you plan to use. -You have several options for installing MXNet: -1. Use a Jetson MXNet pip wheel for Python development. -2. Use precompiled Jetson MXNet binaries. +After installing the prerequisites, you have several options for installing MXNet: +1. Use a Jetson MXNet pip wheel for Python development and use a precompiled Jetson MXNet binary. 3. Build MXNet from source * On a faster Linux computer using cross-compilation * On the Jetson itself (very slow and not recommended) @@ -35,7 +34,7 @@ You have several options for installing MXNet: To build from source or to use the Python wheel, you must install the following dependencies on your Jetson. Cross-compiling will require dependencies installed on that machine as well. -### Python API +### Python Dependencies To use the Python API you need the following dependencies: @@ -60,49 +59,54 @@ sudo pip install \ ``` If you plan to cross-compile you will need to install these dependencies on that computer as well. +If you get an error about something being busy, you can restart the nano and this error will go away and you can continue installation of the prerequisites. -### Configure CUDA +### Download the source & setup some environment variables: -You can check to see what version of CUDA is running with `nvcc`. +These steps are optional, but some of the following instructions expect MXNet source files and the `MXNET_HOME` environment variable. Also CUDA commands will not work out of the box without updating your path. + +Clone the MXNet source code repository using the following `git` command in your home directory: ```bash -nvcc --version +git clone --recursive https://github.com/apache/incubator-mxnet.git mxnet ``` -To switch CUDA versions on a device or computer that has more than one version installed, use the following and replace the version as appropriate. +Setup your environment variables for MXNet and CUDA in your `.profile` file in your home directory. +Add the following to the file. ```bash -sudo rm /usr/local/cuda -sudo ln -s /usr/local/cuda-10.0 /usr/local/cuda +export PATH=/usr/local/cuda/bin:$PATH +export MXNET_HOME=$HOME/mxnet/ +export PYTHONPATH=$MXNET_HOME/python:$PYTHONPATH ``` -**Note:** When cross-compiling, change the CUDA version on the host computer you're using to match the version you're running on your Jetson device. -**Note:** CUDA 10.1 is recommended but doesn't ship with the Nano's SD card image. You may want to go through CUDA upgrade steps first. +You can then apply this change immediately with the following: +```bash +source .profile +``` -### Download the source & setup some environment variables: +**Note:** Change the `~/.profile` steps according to how you prefer to use your shell. Otherwise, your environment variables will be gone after you logout. -These steps are optional, but some of the following instructions expect MXNet source files and the `MXNET_HOME` environment variable. +### Configure CUDA -Clone the MXNet source code repository using the following `git` command in your home directory: +You can check to see what version of CUDA is running with `nvcc`. ```bash -git clone --recursive https://github.com/apache/incubator-mxnet.git mxnet -cd mxnet +nvcc --version ``` -Setup your environment variables for MXNet. +To switch CUDA versions on a device or computer that has more than one version installed, use the following and replace the version as appropriate. ```bash -cd .. -export MXNET_HOME=$(pwd) -echo "export PYTHONPATH=$MXNET_HOME/python:$PYTHONPATH" >> ~/.rc -source ~/.rc +sudo rm /usr/local/cuda +sudo ln -s /usr/local/cuda-10.0 /usr/local/cuda ``` -**Note:** Change the `~/.rc` steps according to how you prefer to use your shell. Otherwise, your environment variables will be gone after you logout. +**Note:** When cross-compiling, change the CUDA version on the host computer you're using to match the version you're running on your Jetson device. +**Note:** CUDA 10.1 is recommended but doesn't ship with the Nano's SD card image. You may want to go through CUDA upgrade steps first. -## Install MXNet for Python +## Option 1. Install MXNet for Python To use a prepared Python wheel, download it to your Jetson, and run it. * [MXNet 1.4.0 - Python 3](https://s3.us-east-2.amazonaws.com/mxnet-public/install/jetson/1.4.0/mxnet-1.4.0-cp36-cp36m-linux_aarch64.whl) @@ -113,12 +117,10 @@ It should download the required dependencies, but if you have issues, install the dependencies in the prerequisites section, then run the pip wheel. ```bash -sudo pip install mxnet-1.4.0-cp36-cp36m-linux_aarch64.whl +sudo pip install mxnet-1.4.0-cp27-cp27mu-linux_aarch64.whl ``` -## Use a Pre-compiled MXNet Binary - -If you want to just use a pre-compiled binary you can download it from S3: +Now use a pre-compiled binary you can download it from S3 which is a patch v1.4.1: * https://s3.us-east-2.amazonaws.com/mxnet-public/install/jetson/1.4.1/libmxnet.so Place this file in `$MXNET_HOME/lib`. @@ -128,12 +130,13 @@ To use this with the MXNet Python binding, you must match the source directory's ```bash cd $MXNET_HOME git checkout v1.4.x -git submodule update --init +git submodule update --init --recursive cd python sudo pip install -e . ``` -## Build MXNet from Source + +## Option 2. Build MXNet from Source Installing MXNet from source is a two-step process: From be5e1bec42b8f7cb50d60ad4323bcc8a429e0589 Mon Sep 17 00:00:00 2001 From: Aaron Markham Date: Wed, 17 Jul 2019 10:51:18 -0700 Subject: [PATCH 2/2] resolving feedback on instructions --- docs/install/install-jetson.md | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/docs/install/install-jetson.md b/docs/install/install-jetson.md index 18376d1d2ad9..0b50ceb3fcc5 100644 --- a/docs/install/install-jetson.md +++ b/docs/install/install-jetson.md @@ -59,11 +59,11 @@ sudo pip install \ ``` If you plan to cross-compile you will need to install these dependencies on that computer as well. -If you get an error about something being busy, you can restart the nano and this error will go away and you can continue installation of the prerequisites. +If you get an error about something being busy, you can restart the Nano and this error will go away. You can then continue installation of the prerequisites. ### Download the source & setup some environment variables: -These steps are optional, but some of the following instructions expect MXNet source files and the `MXNET_HOME` environment variable. Also CUDA commands will not work out of the box without updating your path. +These steps are optional, but some of the following instructions expect MXNet source files and the `MXNET_HOME` environment variable. Also, CUDA commands will not work out of the box without updating your path. Clone the MXNet source code repository using the following `git` command in your home directory: @@ -95,7 +95,7 @@ You can check to see what version of CUDA is running with `nvcc`. nvcc --version ``` -To switch CUDA versions on a device or computer that has more than one version installed, use the following and replace the version as appropriate. +To switch CUDA versions on a device or computer that has more than one version installed, use the following and replace the symbolic link to the version you want. This one uses CUDA 10.0, which is preinstalled on the Nano. ```bash sudo rm /usr/local/cuda @@ -135,6 +135,7 @@ cd python sudo pip install -e . ``` +Refer to the following Conclusion and Next Steps section to test your installation. ## Option 2. Build MXNet from Source