From dbca3984dd74a15879fa2a0cc02b9445aebd5706 Mon Sep 17 00:00:00 2001 From: YaST Bot Date: Sun, 20 Apr 2025 03:27:21 +0000 Subject: [PATCH] Update web translation files Agama-weblate commit: 91e8c9b309d7b11bf70612c222588661789a243a --- web/src/languages.json | 1 - web/src/po/po.ca.js | 91 +-- web/src/po/po.de.js | 88 +- web/src/po/po.es.js | 91 +-- web/src/po/po.ja.js | 91 +-- web/src/po/po.ka.js | 1763 ---------------------------------------- web/src/po/po.sv.js | 91 +-- web/src/po/po.uk.js | 94 +-- 8 files changed, 249 insertions(+), 2061 deletions(-) delete mode 100644 web/src/po/po.ka.js diff --git a/web/src/languages.json b/web/src/languages.json index 0deab968c1..3b70758a64 100644 --- a/web/src/languages.json +++ b/web/src/languages.json @@ -4,7 +4,6 @@ "en-US": "English", "es-ES": "Español", "ja-JP": "日本語", - "ka-KZ": "ქართული", "sv-SE": "Svenska", "uk-UA": "Українська" } \ No newline at end of file diff --git a/web/src/po/po.ca.js b/web/src/po/po.ca.js index 1c6b918a01..dcd5630624 100644 --- a/web/src/po/po.ca.js +++ b/web/src/po/po.ca.js @@ -153,9 +153,6 @@ export default { "Any existing partition will be removed and all data in the disk will be lost.": [ "Se suprimirà qualsevol partició existent i es perdran totes les dades del disc." ], - "As a new partition on %1$s (%2$s)": [ - "Com a partició nova a %1$s (%2$s)" - ], "At least one address must be provided for selected mode": [ "S'ha de proporcionar almenys una adreça per al mode seleccionat." ], @@ -222,6 +219,9 @@ export default { "Before starting the installation, you need to address the following problems:": [ "Abans de començar la instal·lació, heu de resoldre els problemes següents:" ], + "Beta": [ + "" + ], "BitLocker": [ "BitLocker" ], @@ -288,6 +288,9 @@ export default { "Collapse the list of planned actions": [ "Replega la llista d'accions previstes" ], + "Configuration read from the iSCSI Boot Firmware Table (iBFT).": [ + "" + ], "Configure DASD": [ "Configuració de DASD" ], @@ -435,9 +438,6 @@ export default { "Delete current content": [ "Suprimeix el contingut actual" ], - "Delete the volume group and its logical volumes": [ - "Suprimeix el grup de volums i els seus volums lògics" - ], "Delete volume group": [ "Suprimeix el grup de volums" ], @@ -489,9 +489,6 @@ export default { "Download logs": [ "Baixa els registres" ], - "Drive": [ - "Unitat" - ], "During installation, several actions will be performed to setup the layout shown at the table below.": [ "Durant la instal·lació, es fan diverses accions per configurar el disseny que es mostra a la taula següent." ], @@ -504,9 +501,6 @@ export default { "Edit connection %s": [ "Edita la connexió %s" ], - "Edit iSCSI Initiator": [ - "Edita l'iniciador iSCSI" - ], "Edit user": [ "Edita l'usuari" ], @@ -561,6 +555,9 @@ export default { "Ext4": [ "Ext4" ], + "Extensions": [ + "" + ], "F2FS": [ "F2FS" ], @@ -658,6 +655,12 @@ export default { "Hostname": [ "Nom d'amfitrió" ], + "Hostname could not be updated": [ + "" + ], + "Hostname successfully updated": [ + "" + ], "I have read and accept the [license] for %s": [ "He llegit i accepto la [llicència] de %s" ], @@ -700,6 +703,12 @@ export default { "Initiator name": [ "Nom de l'iniciador" ], + "Initiator name could not be updated": [ + "" + ], + "Initiator name successfully updated": [ + "" + ], "Install": [ "Instal·la" ], @@ -796,6 +805,9 @@ export default { "Limited": [ "Limitada" ], + "Loading": [ + "Carregant" + ], "Loading data...": [ "Carregant dades..." ], @@ -919,9 +931,6 @@ export default { "New": [ "Nova" ], - "New LVM volume group": [ - "Grup de volums nou d'LVM" - ], "No": [ "No" ], @@ -949,6 +958,9 @@ export default { "No devices found": [ "No s'ha trobat cap dispositiu" ], + "No iSCSI Boot Firmware Table (iBFT) found. The initiator can be configured manually.": [ + "" + ], "No iSCSI targets found.": [ "No s'ha trobat cap destinació iSCSI." ], @@ -1009,9 +1021,6 @@ export default { "Offline devices must be activated before formatting them. Please, unselect or activate the devices listed below and try it again": [ "Els dispositius fora de línia s'han d'activar abans de formatar-los. Si us plau, desmarqueu o activeu els dispositius que s'indiquen a continuació i torneu-ho a provar." ], - "Offload card": [ - "Targeta de descàrrega" - ], "On boot": [ "A l'arrencada" ], @@ -1144,6 +1153,9 @@ export default { "Reboot": [ "Reinicia" ], + "Recommended": [ + "" + ], "Register": [ "Registra" ], @@ -1171,9 +1183,6 @@ export default { "Remove min channel filter": [ "Suprimeix el filtre del canal mínim" ], - "Remove the configuration for this device": [ - "Suprimeix la configuració d'aquest dispositiu" - ], "Repository load failed": [ "Ha fallat carregar el repositori." ], @@ -1213,15 +1222,6 @@ export default { "Select": [ "Selecciona" ], - "Select a device to configure": [ - "Seleccioneu un dispositiu per configurar-lo" - ], - "Select a device to create %s": [ - "Seleccioneu un dispositiu per crear-hi %s" - ], - "Select a device to install the system": [ - "Seleccioneu un dispositiu on instal·lar el sistema" - ], "Select a disk": [ "Seleccioneu un disc" ], @@ -1255,6 +1255,9 @@ export default { "Select what to do with each partition.": [ "Seleccioneu què voleu fer amb cada partició." ], + "Selected disk (cannot be changed)": [ + "" + ], "Selected patterns": [ "Patrons seleccionats" ], @@ -1367,9 +1370,6 @@ export default { "The configured LVM groups will remain at %s": [ "Els grups d'LVM configurats es mantindran a %s" ], - "The configured partitions will be created as logical volumes": [ - "Les particions configurades es crearan com a volums lògics" - ], "The content may be deleted": [ "El contingut pot suprimir-se" ], @@ -1397,6 +1397,12 @@ export default { "The device will be used by the new system.": [ "El sistema nou usarà el dispositiu." ], + "The disk is used for LVM": [ + "" + ], + "The disk is used for booting": [ + "" + ], "The encryption password did not work": [ "La contrasenya d'encriptació no ha funcionat." ], @@ -1514,20 +1520,8 @@ export default { "This action could destroy any data stored on the devices listed below. Please, confirm that you really want to continue.": [ "Aquesta acció podria destruir qualsevol dada emmagatzemada als dispositius que s'indiquen a continuació. Si us plau, confirmeu que realment voleu continuar." ], - "This device will contain any partition needed for booting": [ - "Aquest dispositiu contindrà qualsevol partició necessària per a arrencar" - ], - "This device will contain the LVM group '%s'": [ - "Aquest dispositiu contindrà el grup d'LVM %s" - ], - "This device will contain the LVM group '%s' and any partition needed to boot": [ - "Aquest dispositiu contindrà el grup d'LVM %s i qualsevol partició necessària per a arrencar" - ], - "This device will contain the configured LVM groups": [ - "Aquest dispositiu contindrà els grups d'LVM configurats" - ], - "This device will contain the configured LVM groups and any partition needed to boot": [ - "Aquest dispositiu contindrà els grups d'LVM configurats i qualsevol partició necessària per a arrencar" + "This extension is not available on the server. Ask the server administrator to mirror the extension.": [ + "" ], "This hostname is dynamic and may change after a reboot or network update, as configured by the local network administrator.": [ "Aquest nom d'amfitrió és dinàmic i pot canviar després d'un reinici o una actualització per xarxa, tal com el configura l'administrador de la xarxa local." @@ -1538,9 +1532,6 @@ export default { "This space includes the base system and the selected software patterns, if any.": [ "Aquest espai inclou el sistema de base i els patrons de programari seleccionats, si n'hi ha." ], - "This uses existing partitions at the device": [ - "Això usa les particions existents al dispositiu" - ], "TiB": [ "TiB" ], diff --git a/web/src/po/po.de.js b/web/src/po/po.de.js index 9c0f7bec5a..93df84c651 100644 --- a/web/src/po/po.de.js +++ b/web/src/po/po.de.js @@ -153,9 +153,6 @@ export default { "Any existing partition will be removed and all data in the disk will be lost.": [ "Alle vorhandenen Partitionen werden entfernt und alle Daten auf der Festplatte gehen verloren." ], - "As a new partition on %1$s (%2$s)": [ - "Als eine neue Partition auf %1$s (%2$s)" - ], "At least one address must be provided for selected mode": [ "Für den ausgewählten Modus muss mindestens eine Adresse angegeben werden" ], @@ -222,6 +219,9 @@ export default { "Before starting the installation, you need to address the following problems:": [ "Bevor Sie mit der Installation beginnen, müssen Sie sich mit folgenden Problemen befassen:" ], + "Beta": [ + "" + ], "BitLocker": [ "BitLocker" ], @@ -288,6 +288,9 @@ export default { "Collapse the list of planned actions": [ "Liste der geplanten Aktionen einklappen" ], + "Configuration read from the iSCSI Boot Firmware Table (iBFT).": [ + "" + ], "Configure DASD": [ "DASD konfigurieren" ], @@ -429,9 +432,6 @@ export default { "Delete current content": [ "Aktuellen Inhalt löschen" ], - "Delete the volume group and its logical volumes": [ - "Die Volume-Gruppe und ihre logischen Volumes löschen" - ], "Delete volume group": [ "Volume-Gruppe löschen" ], @@ -483,9 +483,6 @@ export default { "Download logs": [ "Protokolle herunterladen" ], - "Drive": [ - "Laufwerk" - ], "During installation, several actions will be performed to setup the layout shown at the table below.": [ "Während der Installation werden mehrere Aktionen durchgeführt, um die in der Tabelle unten dargestellte Anordnung einzurichten." ], @@ -498,9 +495,6 @@ export default { "Edit connection %s": [ "Verbindung %s bearbeiten" ], - "Edit iSCSI Initiator": [ - "iSCSI-Initiator bearbeiten" - ], "Edit user": [ "Benutzer bearbeiten" ], @@ -552,6 +546,9 @@ export default { "Ext4": [ "Ext4" ], + "Extensions": [ + "" + ], "F2FS": [ "F2FS" ], @@ -649,6 +646,12 @@ export default { "Hostname": [ "Hostname" ], + "Hostname could not be updated": [ + "" + ], + "Hostname successfully updated": [ + "" + ], "I have read and accept the [license] for %s": [ "Ich habe die [Lizenz] für %s gelesen und akzeptiere sie." ], @@ -691,6 +694,12 @@ export default { "Initiator name": [ "Name des Initiators" ], + "Initiator name could not be updated": [ + "" + ], + "Initiator name successfully updated": [ + "" + ], "Install": [ "Installieren" ], @@ -787,6 +796,9 @@ export default { "Limited": [ "Begrenzt" ], + "Loading": [ + "Wird geladen" + ], "Loading data...": [ "Daten werden gelesen ..." ], @@ -910,9 +922,6 @@ export default { "New": [ "Neu" ], - "New LVM volume group": [ - "Neue LVM-Volume-Gruppe" - ], "No": [ "Nein" ], @@ -940,6 +949,9 @@ export default { "No devices found": [ "Keine Geräte gefunden" ], + "No iSCSI Boot Firmware Table (iBFT) found. The initiator can be configured manually.": [ + "" + ], "No iSCSI targets found.": [ "Keine iSCSI-Ziele gefunden." ], @@ -1126,6 +1138,9 @@ export default { "Reboot": [ "Neustart" ], + "Recommended": [ + "" + ], "Register": [ "Registrieren" ], @@ -1153,9 +1168,6 @@ export default { "Remove min channel filter": [ "" ], - "Remove the configuration for this device": [ - "Konfiguration für dieses Gerät entfernen" - ], "Repository load failed": [ "Laden des Repositoriums ist fehlgeschlagen" ], @@ -1195,15 +1207,6 @@ export default { "Select": [ "Auswählen" ], - "Select a device to configure": [ - "Gerät zum Konfigurieren auswählen" - ], - "Select a device to create %s": [ - "Gerät zum Erstellen von %s auswählen" - ], - "Select a device to install the system": [ - "Gerät für die Installation des Systems auswählen" - ], "Select a disk": [ "Festplatte auswählen" ], @@ -1237,6 +1240,9 @@ export default { "Select what to do with each partition.": [ "Wählen Sie aus, was mit jeder Partition gemacht werden soll." ], + "Selected disk (cannot be changed)": [ + "" + ], "Selected patterns": [ "Ausgewählte Muster" ], @@ -1346,9 +1352,6 @@ export default { "The configured LVM groups will remain at %s": [ "Die konfigurierten LVM-Gruppen bleiben bei %s" ], - "The configured partitions will be created as logical volumes": [ - "Die konfigurierten Partitionen werden als logische Volumes erstellt" - ], "The content may be deleted": [ "Der Inhalt kann gelöscht werden" ], @@ -1376,6 +1379,12 @@ export default { "The device will be used by the new system.": [ "Das Gerät wird von dem neuen System verwendet." ], + "The disk is used for LVM": [ + "" + ], + "The disk is used for booting": [ + "" + ], "The encryption password did not work": [ "Das Verschlüsselungspasswort hat nicht funktioniert" ], @@ -1487,20 +1496,8 @@ export default { "This action could destroy any data stored on the devices listed below. Please, confirm that you really want to continue.": [ "Diese Aktion könnte alle Daten zerstören, die auf den unten aufgeführten Geräten gespeichert sind. Bitte bestätigen Sie, dass Sie wirklich fortfahren möchten." ], - "This device will contain any partition needed for booting": [ - "Dieses Gerät wird jede zum Booten benötigte Partition enthalten" - ], - "This device will contain the LVM group '%s'": [ - "Dieses Gerät wird die LVM-Gruppe ‚%s‘ enthalten" - ], - "This device will contain the LVM group '%s' and any partition needed to boot": [ - "Dieses Gerät wird die LVM-Gruppe ‚%s‘ und jede zum Booten benötigte Partition enthalten" - ], - "This device will contain the configured LVM groups": [ - "Dieses Gerät wird die konfigurierten LVM-Gruppen enthalten" - ], - "This device will contain the configured LVM groups and any partition needed to boot": [ - "Dieses Gerät wird die konfigurierten LVM-Gruppen und alle zum Booten benötigten Partitionen enthalten" + "This extension is not available on the server. Ask the server administrator to mirror the extension.": [ + "" ], "This hostname is dynamic and may change after a reboot or network update, as configured by the local network administrator.": [ "Dieser Hostname ist dynamisch und kann sich nach einem Neustart oder einer Netzwerkaktualisierung ändern, wie vom lokalen Netzwerkadministrator konfiguriert." @@ -1511,9 +1508,6 @@ export default { "This space includes the base system and the selected software patterns, if any.": [ "Dieser Bereich umfasst das Basissystem und die ausgewählten Softwaremuster, falls vorhanden." ], - "This uses existing partitions at the device": [ - "Dabei werden vorhandene Partitionen auf dem Gerät verwendet" - ], "TiB": [ "TiB" ], diff --git a/web/src/po/po.es.js b/web/src/po/po.es.js index 59e0213e73..fa84fa283c 100644 --- a/web/src/po/po.es.js +++ b/web/src/po/po.es.js @@ -153,9 +153,6 @@ export default { "Any existing partition will be removed and all data in the disk will be lost.": [ "Cualquier partición existente será eliminada y todos los datos en el disco se perderán." ], - "As a new partition on %1$s (%2$s)": [ - "Como una partición nueva en %1$s (%2$s)" - ], "At least one address must be provided for selected mode": [ "Se debe proporcionar al menos una dirección para el modo seleccionado" ], @@ -222,6 +219,9 @@ export default { "Before starting the installation, you need to address the following problems:": [ "Antes de comenzar la instalación, debe solucionar los siguientes problemas:" ], + "Beta": [ + "" + ], "BitLocker": [ "BitLocker" ], @@ -288,6 +288,9 @@ export default { "Collapse the list of planned actions": [ "Colapsar el listado de acciones planificadas" ], + "Configuration read from the iSCSI Boot Firmware Table (iBFT).": [ + "" + ], "Configure DASD": [ "Configurar DASD" ], @@ -435,9 +438,6 @@ export default { "Delete current content": [ "Eliminar el contenido actual" ], - "Delete the volume group and its logical volumes": [ - "Borra el grupo de volumen y sus volúmenes lógicos" - ], "Delete volume group": [ "Borrar grupo del volumen" ], @@ -489,9 +489,6 @@ export default { "Download logs": [ "Descargar bitácoras" ], - "Drive": [ - "Unidad" - ], "During installation, several actions will be performed to setup the layout shown at the table below.": [ "Durante la instalación, se realizará varias operaciones para configurar la distribución mostrada en la tabla a continuación." ], @@ -504,9 +501,6 @@ export default { "Edit connection %s": [ "Editar conexión %s" ], - "Edit iSCSI Initiator": [ - "Editar iniciador iSCSI" - ], "Edit user": [ "Editar usuario" ], @@ -561,6 +555,9 @@ export default { "Ext4": [ "Ext4" ], + "Extensions": [ + "" + ], "F2FS": [ "F2FS" ], @@ -658,6 +655,12 @@ export default { "Hostname": [ "Nombre de hospedaje" ], + "Hostname could not be updated": [ + "" + ], + "Hostname successfully updated": [ + "" + ], "I have read and accept the [license] for %s": [ "He leído y acepto la [license] para %s" ], @@ -700,6 +703,12 @@ export default { "Initiator name": [ "Nombre del iniciador" ], + "Initiator name could not be updated": [ + "" + ], + "Initiator name successfully updated": [ + "" + ], "Install": [ "Instalar" ], @@ -796,6 +805,9 @@ export default { "Limited": [ "Limitado" ], + "Loading": [ + "Cargando..." + ], "Loading data...": [ "Cargando los datos..." ], @@ -919,9 +931,6 @@ export default { "New": [ "Nuevo" ], - "New LVM volume group": [ - "Nuevo grupo de volumen LVM" - ], "No": [ "No" ], @@ -949,6 +958,9 @@ export default { "No devices found": [ "Ningún dispositivo encontrado" ], + "No iSCSI Boot Firmware Table (iBFT) found. The initiator can be configured manually.": [ + "" + ], "No iSCSI targets found.": [ "No se encontraron objetivos iSCSI." ], @@ -1009,9 +1021,6 @@ export default { "Offline devices must be activated before formatting them. Please, unselect or activate the devices listed below and try it again": [ "Los dispositivos sin conexión deben activarse antes de ser formateados. Deseleccione o active los dispositivos listados debajo y trate nuevamente" ], - "Offload card": [ - "Descargar tarjeta" - ], "On boot": [ "En arranque" ], @@ -1144,6 +1153,9 @@ export default { "Reboot": [ "Reiniciar" ], + "Recommended": [ + "" + ], "Register": [ "Registrar" ], @@ -1171,9 +1183,6 @@ export default { "Remove min channel filter": [ "Eliminar filtro de canal mínimo" ], - "Remove the configuration for this device": [ - "Quita la configuración para este dispositivo" - ], "Repository load failed": [ "Falló la carga del repositorio" ], @@ -1213,15 +1222,6 @@ export default { "Select": [ "Seleccionar" ], - "Select a device to configure": [ - "Seleccione un dispositivo para configurar" - ], - "Select a device to create %s": [ - "Seleccione un dispositivo para crear %s" - ], - "Select a device to install the system": [ - "Seleccione un dispositivo para instalar el sistema" - ], "Select a disk": [ "Seleccionar un disco" ], @@ -1255,6 +1255,9 @@ export default { "Select what to do with each partition.": [ "Seleccione qué hacer con cada partición." ], + "Selected disk (cannot be changed)": [ + "" + ], "Selected patterns": [ "Seleccione los patrones" ], @@ -1367,9 +1370,6 @@ export default { "The configured LVM groups will remain at %s": [ "Los grupos LVM configurados permanecerán en %s" ], - "The configured partitions will be created as logical volumes": [ - "Las particiones configuradas serán creadas como volúmenes lógicos" - ], "The content may be deleted": [ "El contenido puede ser eliminado" ], @@ -1397,6 +1397,12 @@ export default { "The device will be used by the new system.": [ "El dispositivo será utilizado por el sistema nuevo." ], + "The disk is used for LVM": [ + "" + ], + "The disk is used for booting": [ + "" + ], "The encryption password did not work": [ "La contraseña de cifrado no funcionó" ], @@ -1514,20 +1520,8 @@ export default { "This action could destroy any data stored on the devices listed below. Please, confirm that you really want to continue.": [ "Esta acción podría destruir cualquier dato almacenado en los dispositivos listados debajo. Confirme que realmente desea continuar." ], - "This device will contain any partition needed for booting": [ - "Este dispositivo contendrá cualquier partición necesaria para el arranque" - ], - "This device will contain the LVM group '%s'": [ - "Este dispositivo contendrá el grupo '%s' de LVM" - ], - "This device will contain the LVM group '%s' and any partition needed to boot": [ - "Este dispositivo contendrá el grupo '%s' de LVM y cualquier partición necesaria para arrancar" - ], - "This device will contain the configured LVM groups": [ - "Este dispositivo contendrá los grupos configurados de LVM" - ], - "This device will contain the configured LVM groups and any partition needed to boot": [ - "Este dispositivo contendrá los grupos de VLM configurado y cualquier partición necesaria para arrancar" + "This extension is not available on the server. Ask the server administrator to mirror the extension.": [ + "" ], "This hostname is dynamic and may change after a reboot or network update, as configured by the local network administrator.": [ "Este nombre de hospedaje es dinámico y puede cambiar tras un rearranque o actualización de red, como configuró por el administrador de la red local." @@ -1538,9 +1532,6 @@ export default { "This space includes the base system and the selected software patterns, if any.": [ "Este espacio incluye el sistema base y los patrones de software seleccionados, si los hubiera." ], - "This uses existing partitions at the device": [ - "Esto utiliza particiones existentes en el dispositivo" - ], "TiB": [ "TiB" ], diff --git a/web/src/po/po.ja.js b/web/src/po/po.ja.js index 81954eb24b..15ca27f391 100644 --- a/web/src/po/po.ja.js +++ b/web/src/po/po.ja.js @@ -153,9 +153,6 @@ export default { "Any existing partition will be removed and all data in the disk will be lost.": [ "全てのパーティションを削除し、ディスク内に存在するデータを全て消去します。" ], - "As a new partition on %1$s (%2$s)": [ - "%1$s に新しいパーティションとして (%2$s)" - ], "At least one address must be provided for selected mode": [ "選択しているモードの場合、 1 つ以上のアドレスを設定しなければなりません" ], @@ -222,6 +219,9 @@ export default { "Before starting the installation, you need to address the following problems:": [ "インストールを開始する前に、下記の問題に対応する必要があります:" ], + "Beta": [ + "" + ], "BitLocker": [ "BitLocker" ], @@ -288,6 +288,9 @@ export default { "Collapse the list of planned actions": [ "処理計画の一覧を巻き取る" ], + "Configuration read from the iSCSI Boot Firmware Table (iBFT).": [ + "" + ], "Configure DASD": [ "DASD の設定" ], @@ -435,9 +438,6 @@ export default { "Delete current content": [ "現在の内容を全て削除する" ], - "Delete the volume group and its logical volumes": [ - "ボリュームグループと論理ボリュームを削除する" - ], "Delete volume group": [ "ボリュームグループの削除" ], @@ -489,9 +489,6 @@ export default { "Download logs": [ "ログのダウンロード" ], - "Drive": [ - "ドライブ" - ], "During installation, several actions will be performed to setup the layout shown at the table below.": [ "インストールの際、下記の表に示した配置を設定するためにいくつかの処理が行われます。" ], @@ -504,9 +501,6 @@ export default { "Edit connection %s": [ "接続 %s の編集" ], - "Edit iSCSI Initiator": [ - "iSCSI イニシエータの編集" - ], "Edit user": [ "ユーザの編集" ], @@ -561,6 +555,9 @@ export default { "Ext4": [ "ext4" ], + "Extensions": [ + "" + ], "F2FS": [ "f2fs" ], @@ -657,6 +654,12 @@ export default { "Hostname": [ "ホスト名" ], + "Hostname could not be updated": [ + "" + ], + "Hostname successfully updated": [ + "" + ], "I have read and accept the [license] for %s": [ "%s に対する [ライセンス] を受け入れます" ], @@ -699,6 +702,12 @@ export default { "Initiator name": [ "イニシエータ名" ], + "Initiator name could not be updated": [ + "" + ], + "Initiator name successfully updated": [ + "" + ], "Install": [ "インストール" ], @@ -795,6 +804,9 @@ export default { "Limited": [ "制限" ], + "Loading": [ + "読み込んでいます" + ], "Loading data...": [ "データを読み込んでいます..." ], @@ -918,9 +930,6 @@ export default { "New": [ "新規" ], - "New LVM volume group": [ - "新規 LVM ボリュームグループ" - ], "No": [ "いいえ" ], @@ -948,6 +957,9 @@ export default { "No devices found": [ "デバイスが見つかりませんでした" ], + "No iSCSI Boot Firmware Table (iBFT) found. The initiator can be configured manually.": [ + "" + ], "No iSCSI targets found.": [ "iSCSI ターゲットが見つかりませんでした。" ], @@ -1008,9 +1020,6 @@ export default { "Offline devices must be activated before formatting them. Please, unselect or activate the devices listed below and try it again": [ "フォーマットを実施する前にオフラインのデバイスを有効化する必要があります。下記に示されたデバイスの選択を外すか、有効化してからやり直してください" ], - "Offload card": [ - "オフロードカード" - ], "On boot": [ "システム起動時" ], @@ -1143,6 +1152,9 @@ export default { "Reboot": [ "再起動" ], + "Recommended": [ + "" + ], "Register": [ "登録" ], @@ -1170,9 +1182,6 @@ export default { "Remove min channel filter": [ "最小チャネルのフィルタを削除" ], - "Remove the configuration for this device": [ - "このデバイス向けの設定を削除" - ], "Repository load failed": [ "リポジトリ読み込み失敗" ], @@ -1212,15 +1221,6 @@ export default { "Select": [ "選択" ], - "Select a device to configure": [ - "設定するデバイスの選択" - ], - "Select a device to create %s": [ - "%s を作成するデバイスの選択" - ], - "Select a device to install the system": [ - "システムのインストール先となるデバイスの選択" - ], "Select a disk": [ "ディスクの選択" ], @@ -1254,6 +1254,9 @@ export default { "Select what to do with each partition.": [ "パーティションの設定作業を独自に実施します。" ], + "Selected disk (cannot be changed)": [ + "" + ], "Selected patterns": [ "パターンの選択" ], @@ -1365,9 +1368,6 @@ export default { "The configured LVM groups will remain at %s": [ "設定済みの LVM グループが %s に残されます" ], - "The configured partitions will be created as logical volumes": [ - "設定したパーティションは論理ボリュームとして作成します" - ], "The content may be deleted": [ "内容が削除されるかもしれません" ], @@ -1395,6 +1395,12 @@ export default { "The device will be used by the new system.": [ "デバイスは新しいシステムで使用されます。" ], + "The disk is used for LVM": [ + "" + ], + "The disk is used for booting": [ + "" + ], "The encryption password did not work": [ "暗号化パスワードが正しくありません" ], @@ -1512,20 +1518,8 @@ export default { "This action could destroy any data stored on the devices listed below. Please, confirm that you really want to continue.": [ "この処理により、下記に示したデバイス内のデータが全て消去されます。続行して問題ないかどうか、ご確認ください。" ], - "This device will contain any partition needed for booting": [ - "このデバイスには起動に必要なパーティションが含まれています" - ], - "This device will contain the LVM group '%s'": [ - "このデバイスには設定済みの LVM グループ '%s' が含まれています" - ], - "This device will contain the LVM group '%s' and any partition needed to boot": [ - "このデバイスには起動に必要な設定済み LVM グループ '%s' とパーティションが含まれています" - ], - "This device will contain the configured LVM groups": [ - "このデバイスには設定済みの LVM グループが含まれています" - ], - "This device will contain the configured LVM groups and any partition needed to boot": [ - "このデバイスには起動に必要な設定済み LVM グループとパーティションが含まれています" + "This extension is not available on the server. Ask the server administrator to mirror the extension.": [ + "" ], "This hostname is dynamic and may change after a reboot or network update, as configured by the local network administrator.": [ "ホスト名は動的なものとなります。ご利用のネットワークの設定に依存しますが、再起動やネットワーク側の変更によって変わってしまう場合があります。" @@ -1536,9 +1530,6 @@ export default { "This space includes the base system and the selected software patterns, if any.": [ "この容量にはシステムの基本部分のほか、選択したソフトウエアパターンが含まれます。" ], - "This uses existing partitions at the device": [ - "デバイス内の既存パーティションを使用する" - ], "TiB": [ "TiB" ], diff --git a/web/src/po/po.ka.js b/web/src/po/po.ka.js deleted file mode 100644 index 5610fad395..0000000000 --- a/web/src/po/po.ka.js +++ /dev/null @@ -1,1763 +0,0 @@ -export default { - "": { - "plural-forms": (n) => n != 1, - "language": "ka" - }, - " Timezone selection": [ - " დროის სარტყლის არჩევანი" - ], - "%1$s (%2$s)": [ - "%1$s (%2$s)" - ], - "%1$s - %2$s": [ - "%1$s - %2$s" - ], - "%1$s at %2$s": [ - "%1$s %2$s-ზე" - ], - "%1$s will still contain the LVM group '%2$s' and any partition needed to boot": [ - "" - ], - "%s - %s": [ - "%s - %s" - ], - "%s [must be registered].": [ - "%s [დარეგისტრირებული უნდა იყოს]." - ], - "%s disk": [ - "%s დისკი" - ], - "%s has been registered with below information.": [ - "" - ], - "%s is an immutable system with atomic updates. It uses a read-only Btrfs file system updated via snapshots.": [ - "" - ], - "%s logo": [ - "%s-ის ლოგო" - ], - "%s will still contain the configured LVM groups and any partition needed to boot": [ - "" - ], - "%s with %d partitions": [ - "%s %d დანაყოფით" - ], - "A %1$s of %2$s will be created for %3$s": [ - "%1$s ზომით %2$s შეიქმნება მიმაგრების წერტილზე %3$s" - ], - "A %1$s of at least %2$s will be created for %3$s": [ - "" - ], - "A %1$s with a size between %2$s and %3$s will be created for %4$s": [ - "" - ], - "A generic minimum size of %1$s will be used for the new %2$s": [ - "" - ], - "A generic size of %s will be used for the new %2$s": [ - "" - ], - "A generic size range between %1$s and %2$s will be used for the new %3$s": [ - "" - ], - "A partition may be deleted": [ - "დანაყოფი შეიძლება წაიშალოს" - ], - "A partition may be shrunk": [ - "დანაყოფი შეიძლება შემცირდეს" - ], - "A partition will be deleted": [ - "დანაყოფი წაიშლება" - ], - "Accept": [ - "დასტური" - ], - "Action": [ - "ქმედება" - ], - "Actions": [ - "ქმედებები" - ], - "Actions for connection %s": [ - "ქმედებები მიერთებისთვის %s" - ], - "Activate": [ - "აქტივაცია" - ], - "Activate and format DASD devices": [ - "DASD მოწყობილობების გააქტიურება და დაფორმატება" - ], - "Activate new disk": [ - "ახალი დისკის გააქტიურება" - ], - "Activate zFCP disk": [ - "zFCP დისკის გააქტიურება" - ], - "Activate zFCP disks": [ - "zFCP დისკების გააქტიურება" - ], - "Activated": [ - "აქტივირებულია" - ], - "Add": [ - "დამატება" - ], - "Add DNS": [ - "DNS-ის დამატება" - ], - "Add LVM volume group": [ - "LVM ტომების ჯგუფის დამატება" - ], - "Add an address": [ - "მისამართის დამატება" - ], - "Add another DNS": [ - "კიდევ ერთი DNS-ის დამატება" - ], - "Add another address": [ - "სხვა მისამართის დამატება" - ], - "Add another partition or mount an existing one": [ - "" - ], - "Add logical volume": [ - "ლოგიკური ტომის დამატება" - ], - "Add or use partition": [ - "დანაყოფის დამატება ან გამოყენება" - ], - "Address": [ - "მისამართი" - ], - "Addresses": [ - "მისამართები" - ], - "Addresses data list": [ - "მისამართის მონაცემების სია" - ], - "Adjust the settings below to make the new system fit into the available space.": [ - "" - ], - "All content will be deleted": [ - "შემცველობა სრულად წაიშლება" - ], - "All fields are required": [ - "ყველა ველი აუცილებელია" - ], - "Alongside defining the first user, authentication methods for the root user can be configured.": [ - "" - ], - "Already using all available disks": [ - "უკვე ვიყენებ ყველა ხელმისაწვდომ დისკს" - ], - "Any existing partition will be removed and all data in the disk will be lost.": [ - "" - ], - "As a new partition on %1$s (%2$s)": [ - "როგორც ახალი დანაყოფი %1$s-ზე (%2$s)" - ], - "At least one address must be provided for selected mode": [ - "" - ], - "At least one partition will be deleted": [ - "" - ], - "At this point you can power off the machine.": [ - "" - ], - "At this point you can reboot the machine to log in to the new system.": [ - "" - ], - "Authentication": [ - "ავთენტიკაცია" - ], - "Authentication by initiator": [ - "ავთენტიკაცია ინიციატორით" - ], - "Authentication by target": [ - "ავთენტიკაცია სამიზნით" - ], - "Authentication failed, please try again": [ - "ავთენტიკაცია ჩავარდა. თავიდან სცადეთ" - ], - "Auto LUNs Scan": [ - "LUN-ების ავტომატური სკანირება" - ], - "Automatic": [ - "ავტომატური" - ], - "Automatic (DHCP)": [ - "ავტომატური (მხოლოდ DHCP)" - ], - "Automatic LUN scan is [disabled]. LUNs have to be manually configured after activating a controller.": [ - "" - ], - "Automatic LUN scan is [enabled]. Activating a controller which is running in NPIV mode will automatically configures all its LUNs.": [ - "" - ], - "Available products": [ - "ხელმისაწვდომი პროდუქტები" - ], - "Back": [ - "უკან" - ], - "Based on the amount of RAM in the system, a %1s$ of %2$s will be created for %3$s": [ - "" - ], - "Based on the amount of RAM in the system, a %1s$ of at least %2$s will be created for %3$s": [ - "" - ], - "Based on the amount of RAM in the system, a %1s$ with a size between %2$s and %3$s will be created for %4$s": [ - "" - ], - "Bcachefs": [ - "Bcachefs" - ], - "Before %s": [ - "%s-მდე" - ], - "Before installing, you have to make some decisions. Click on each section to review the settings.": [ - "" - ], - "Before starting the installation, you need to address the following problems:": [ - "" - ], - "BitLocker": [ - "BitLocker" - ], - "Boot options": [ - "ჩატვირთვის პარამეტრები" - ], - "Btrfs": [ - "Btrfs" - ], - "Btrfs with snapshots": [ - "Btrfs სწრაფი ასლებით" - ], - "Calculated automatically": [ - "ავტომატურად გამოთვლილი" - ], - "Cancel": [ - "გაუქმება" - ], - "Cannot be changed in remote installation": [ - "ვერ შეიცვლება დაშორებული დაყენებისას" - ], - "Cannot connect to Agama server": [ - "Agama-ის სერვერთან მიერთება შეუძლებელია" - ], - "Cannot format all selected devices": [ - "ყველა მონიშნული მოწყობილობის დაფორმატება შეუძლებელია" - ], - "Change": [ - "შეცვლა" - ], - "Change boot options": [ - "ჩატვირთვის პარამეტრების შეცვლა" - ], - "Change product": [ - "პროდუქტის შეცვლა" - ], - "Change selection": [ - "მონიშნულის შეცვლა" - ], - "Channel ID": [ - "არხის ID" - ], - "Check the %d planned actions": [ - "%d დაგეგმილი ქმედების შემოწმება" - ], - "Check the following before continuing": [ - "შეამოწმეთ შემდეგი ელემენტები გაგრძელებამდე" - ], - "Choose a disk for placing the boot loader": [ - "" - ], - "Choose what to with current content": [ - "აირჩიეთ, რა ვუყო არსებულ შემცველობას" - ], - "Clear": [ - "გაწმენდა" - ], - "Clear selected mount point": [ - "მონიშნული მიმაგრების წერტილის გასუფთავება" - ], - "Close": [ - "დახურვა" - ], - "Collapse the list of planned actions": [ - "დაგეგმილი ქმედებების ჩამოშლა" - ], - "Configure DASD": [ - "DASD-ის მორგება" - ], - "Configure LVM Volume Group": [ - "LVM ტომების ჯგუფის მორგება" - ], - "Configure LVM logical volume at %s volume group": [ - "" - ], - "Configure iSCSI": [ - "iSCSI-ის მორგება" - ], - "Configure partition at %s": [ - "დანაყოფის აღწერა %s-ზე" - ], - "Configure zFCP": [ - "zFCP-ის მორგება" - ], - "Configuring the product, please wait ...": [ - "მიმდინარეობს პროდუქტის მორგება. მოითმინეთ ..." - ], - "Confirm": [ - "დადასტურება" - ], - "Confirm Installation": [ - "დაყენების დადასტურება" - ], - "Congratulations!": [ - "გილოცავთ!" - ], - "Connect": [ - "დაკავშირება" - ], - "Connect to a Wi-Fi network": [ - "Wi-Fi ქსელთან მიერთება" - ], - "Connect to hidden network": [ - "დამალულ ქსელთან მიერთება" - ], - "Connect to iSCSI targets": [ - "iSCSI სამიზნეებთან მიერთება" - ], - "Connected": [ - "დაკავშირებულია" - ], - "Connected (%s)": [ - "მიერთებულია (%s)" - ], - "Connected to %s": [ - "მიერთებულია %s-სთან" - ], - "Connecting": [ - "დაკავშირება" - ], - "Connection actions": [ - "კავშირის ქმედებები" - ], - "Content will be kept": [ - "შემცველობა შენარჩუნებული იქნება" - ], - "Continue": [ - "გაგრძელება" - ], - "Continuing without installing the package can result in a broken system. In some cases the system might not even boot.": [ - "" - ], - "Controllers": [ - "კონტროლერები" - ], - "Could not authenticate against the server, please check it.": [ - "" - ], - "Could not log in. Please, make sure that the password is correct.": [ - "" - ], - "Create LVM volume group %s": [ - "შეიქმნება LVM-ის ტომების ჯგუფი %s" - ], - "Create user": [ - "მომხმარებლის შექმნა" - ], - "Current %1$s at %2$s": [ - "მიმდინარე %1$s მოწყობილობაზე %2$s" - ], - "Current %s": [ - "მიმდინარეა %s" - ], - "Custom": [ - "მორგებული" - ], - "DASD": [ - "DASD" - ], - "DASD %s": [ - "DASD %s" - ], - "DASD devices selection table": [ - "DASD მოწყობილობების ასარჩევი ცხრილი" - ], - "DASDs table section": [ - "DASD-ის ცხრილის სექცია" - ], - "DIAG": [ - "დიაგ" - ], - "DNS": [ - "DNS" - ], - "Deactivate": [ - "დეაქტივაცია" - ], - "Deactivated": [ - "დეაქტივირებულია" - ], - "Default file system for %s": [ - "ნაგულისხმევი ფაილური სისტემა %s-სთვის" - ], - "Default file system for generic logical volumes": [ - "ნაგულისხმევი ფაილური ზოგადი ლოგიკური ტომებისთვის" - ], - "Default file system for generic partitions": [ - "" - ], - "Define a custom size or a range": [ - "" - ], - "Define a new LVM on the disk": [ - "" - ], - "Define a new LVM on top of one or several disks": [ - "" - ], - "Define a user now": [ - "მომხარებლის აღწერა" - ], - "Define the first user with admin (sudo) privileges for system management.": [ - "" - ], - "Defined (hidden)": [ - "აღწერილი (დამალული)" - ], - "Delete": [ - "წაშლა" - ], - "Delete current content": [ - "მიმდინარე შემცველობის წაშლა" - ], - "Delete the volume group and its logical volumes": [ - "" - ], - "Delete volume group": [ - "ტომების ჯგუფის წაშლა" - ], - "Destroy current data and format partition as": [ - "" - ], - "Details": [ - "დეტალები" - ], - "Device": [ - "მოწყობილობა" - ], - "Discard": [ - "მოცილება" - ], - "Disconnect": [ - "გამოერთება" - ], - "Disconnected": [ - "გამოერთებული" - ], - "Discover": [ - "აღმოაჩინეთ" - ], - "Discover and connect to iSCSI targets": [ - "iSCSI სამიზნეების აღმოჩენა და მიერთება" - ], - "Discover iSCSI Targets": [ - "iSCSI სამიზნეების აღმოჩენა" - ], - "Discover iSCSI targets": [ - "iSCSI სამიზნეების აღმოჩენა" - ], - "Disk": [ - "დისკი" - ], - "Disks": [ - "დისკები" - ], - "Do not configure": [ - "მორგება არ მოხდება" - ], - "Do not format %s and keep the data": [ - "" - ], - "Do not use": [ - "არ გამოიყენო" - ], - "Download logs": [ - "ჟურნალის გადმოწერა" - ], - "Drive": [ - "დისკი" - ], - "During installation, several actions will be performed to setup the layout shown at the table below.": [ - "" - ], - "Edit": [ - "ჩასწორება" - ], - "Edit %s": [ - "%s-ის ჩასწორება" - ], - "Edit connection %s": [ - "%s მიერთების ჩასწორება" - ], - "Edit iSCSI Initiator": [ - "ჩასწორება iSCSI ინიციატორის" - ], - "Edit user": [ - "მომხმარებლის ჩასწორება" - ], - "Edit volume group": [ - "ტომების ჯგუფის ჩასწორება" - ], - "Empty LVM volume group %s": [ - "ცარიელი LVM ტომების ჯგუფი %s" - ], - "Encrypt the system": [ - "სისტემის დაშიფვრა" - ], - "Encrypted Device": [ - "დაშიფრული მოწყობილობა" - ], - "Encryption": [ - "დაშიფვრა" - ], - "Encryption Password": [ - "დაშიფვრის პაროლი" - ], - "Encryption is disabled": [ - "დაშიფვრა გათიშულია" - ], - "Encryption is enabled": [ - "დაშიფვრა ჩართულია" - ], - "Encryption is enabled using TPM unlocking": [ - "დაშიფვრა ჩართულია TPM განბლოკვის გამოყენებით" - ], - "Encryption settings": [ - "დაშიფვრის პარამეტრები" - ], - "Enter a hostname.": [ - "შეიყვანეთ ჰოსტის სახელი." - ], - "Enter a name": [ - "შეიყვანეთ სახელი" - ], - "Enter a name for the volume group.": [ - "" - ], - "ExFAT": [ - "ExFAT" - ], - "Ext2": [ - "Ext2" - ], - "Ext3": [ - "Ext3" - ], - "Ext4": [ - "Ext4" - ], - "F2FS": [ - "F2FS" - ], - "FAT": [ - "FAT" - ], - "Failed to calculate a storage layout": [ - "" - ], - "File system": [ - "ფაილური სისტემა" - ], - "File system label": [ - "ფაილური სისტემის ჭდე" - ], - "Filter by description or keymap code": [ - "გაფილტვრა აღწერით ან რილაკების რუკის კოდით" - ], - "Filter by language, territory or locale code": [ - "" - ], - "Filter by max channel": [ - "გაფილვრა მაქს. არხით" - ], - "Filter by min channel": [ - "მინ. არხით გაფილტვრა" - ], - "Filter by pattern title or description": [ - "" - ], - "Filter by territory, time zone code or UTC offset": [ - "" - ], - "Find space in %s": [ - "ადგილის პოვნა %s-ში" - ], - "Finish": [ - "დასრულება" - ], - "Finished": [ - "დასრულებულია" - ], - "First user": [ - "პირველი მომხმარებელი" - ], - "Forget": [ - "დავიწყება" - ], - "Forget connection %s": [ - "%s მიერთების დავიწყება" - ], - "Format": [ - "დაფორმატება" - ], - "Format logical volume as": [ - "ლოგიკური ტომის დაფორმატება, როგორც" - ], - "Format partition as": [ - "დანაყოფის დაფორმატება, როგორც" - ], - "Format selected devices?": [ - "დავაფორმატო არჩეული მოწყობილობები?" - ], - "Formatted": [ - "დაფორმატებული" - ], - "Formatting DASD devices": [ - "DASD მოწყობილობების დაფორმატება" - ], - "Full Disk Encryption (FDE) allows to protect the information stored at the new file systems, including data, programs, and system files.": [ - "" - ], - "Full name": [ - "სრული სახელი" - ], - "Gateway": [ - "ნაგულისხმევი რაუტერი" - ], - "Gateway can be defined only in 'Manual' mode": [ - "" - ], - "GiB": [ - "გიბ" - ], - "Hide": [ - "დამალვა" - ], - "Hide %d subvolume action": [ - "", - "" - ], - "Hide details": [ - "დეტალების დამალვა" - ], - "Hostname": [ - "ჰოსტის სახელი" - ], - "I have read and accept the [license] for %s": [ - "" - ], - "IP Address": [ - "IP მისამართი" - ], - "IP address": [ - "IP-მისამართი" - ], - "IP addresses": [ - "IP მისამართები" - ], - "If a local media was used to run this installer, remove it before the next boot.": [ - "" - ], - "If the unit is omitted, bytes (B) will be used. Greater units can be of the form GiB (power of 2) or GB (power of 10).": [ - "" - ], - "If you continue, partitions on your hard disk will be modified according to the provided installation settings.": [ - "" - ], - "In progress": [ - "მიმდინარეობს" - ], - "Incorrect IP address": [ - "არასწორი IP მისამართი" - ], - "Incorrect password": [ - "არასწორი პაროლი" - ], - "Incorrect port": [ - "არასწორი პორტი" - ], - "Incorrect user name": [ - "არასწორი მომხმარებლის სახელი" - ], - "Initiator": [ - "ინიციატორი" - ], - "Initiator name": [ - "ინიციატორის სახელი" - ], - "Install": [ - "დაყენება" - ], - "Install using an advanced configuration.": [ - "დაყენება დამატებითი მორგებით." - ], - "Install using device %s and deleting all its content.": [ - "" - ], - "Install using device %s shrinking existing partitions as needed.": [ - "" - ], - "Install using device %s with a custom strategy to find the needed space.": [ - "" - ], - "Install using device %s without modifying existing partitions.": [ - "" - ], - "Install using several devices and deleting all its content.": [ - "" - ], - "Install using several devices shrinking existing partitions as needed.": [ - "" - ], - "Install using several devices with a custom strategy to find the needed space.": [ - "" - ], - "Install using several devices without modifying existing partitions.": [ - "" - ], - "Installation Devices": [ - "დაყენების მოწყობილობები" - ], - "Installation will take %s.": [ - "დაყენებას დასჭირდება %s." - ], - "Installer Options": [ - "დაყენების პროგრამის მორგება" - ], - "Installer options": [ - "დაყენების პროგრამის მორგება" - ], - "Installing a broken package affects system stability and is a big security risk!": [ - "" - ], - "Installing the system, please wait...": [ - "მიმდინარეობს სისტემის დაყენება. მოითმინეთ..." - ], - "Interface": [ - "ინტერფეისი" - ], - "Invalid storage settings": [ - "არასწორი საცავის პარამეტრები" - ], - "Ip prefix or netmask": [ - "IP პრეფიქსი ან ქსელის ნიღაბი" - ], - "It is not possible to install the system with the current configuration. Adjust the settings below.": [ - "" - ], - "JFS": [ - "JFS" - ], - "Keep size of %s": [ - "%s-ის ზომის შენარჩუნება" - ], - "Keyboard": [ - "კლავიატურა" - ], - "Keyboard layout": [ - "კლავიატურის განლაგება" - ], - "Keyboard selection": [ - "კლავიატურის არჩევანი" - ], - "KiB": [ - "კიბ" - ], - "LUN": [ - "LUN" - ], - "Label": [ - "ჭდე" - ], - "Language": [ - "ენა" - ], - "Let the installer propose a sensible range of sizes": [ - "" - ], - "License language": [ - "ლიცენზიის ენა" - ], - "Limited": [ - "შეზღუდული" - ], - "Loading data...": [ - "მონაცემების ჩატვირთვა..." - ], - "Loading the installation repositories...": [ - "დაყენების რეპოზიტორიების ჩატვირთვა..." - ], - "Locale selection": [ - "ლოკალის არჩევანი" - ], - "Localization": [ - "ლოკალიზაცია" - ], - "Log in": [ - "შესვლა" - ], - "Log in as %s": [ - "შესვლა, როგორც %s" - ], - "Logical volume name": [ - "ლოგიკური ტომის სახელი" - ], - "Logical volumes": [ - "ლოგიკური ტომები" - ], - "Login": [ - "შესვლა" - ], - "Login %s": [ - "%s-ზე შესვლა" - ], - "Login form": [ - "შესვლის ფორმა" - ], - "Logout": [ - "გასვლა" - ], - "Main navigation": [ - "მთავარი ნავიგაცია" - ], - "Make sure you provide the correct values": [ - "" - ], - "Manage DASD devices": [ - "DASD მოწყობილობების მართვა" - ], - "Manual": [ - "ხელით" - ], - "Maximum": [ - "მაქსიმუმი" - ], - "Maximum size mode": [ - "მაქსიმალური ზომის რეჟიმი" - ], - "Maximum size options": [ - "მაქსიმალური ზომის მორგება" - ], - "Maximum size value": [ - "მაქსიმალური ზომის მნიშვნელობა" - ], - "MiB": [ - "მიბ" - ], - "Minimum": [ - "მინიმუმი" - ], - "Minimum size value": [ - "მინიმალური ზომის მნიშვნელობა" - ], - "Mode": [ - "რეჟიმი" - ], - "Modify settings and physical volumes": [ - "პარამეტრების და ფიზიკური ტომების შეცვლა" - ], - "More actions": [ - "მეტი ქმედება" - ], - "More devices": [ - "მეტი მოწყობილობა" - ], - "Mount Point": [ - "მიმაგრების წერტილი" - ], - "Mount point": [ - "მიმაგრების წერტილი" - ], - "Mount point mode": [ - "მიმაგრების წერტილის რეჟიმი" - ], - "Mount point options": [ - "მიმაგრების წერტილის მორგება" - ], - "Mount point toggle": [ - "მიმაგრების წერტილის გადართვა" - ], - "Move mount points": [ - "მიმაგრების წერტილების გადატანა" - ], - "Move the mount points currently configured at the selected disks to logical volumes of this volume group.": [ - "" - ], - "Multipath": [ - "მრავალბილიკიანი" - ], - "NFS": [ - "NFS" - ], - "NILFS2": [ - "NILFS2" - ], - "NTFS": [ - "NTFS" - ], - "Name": [ - "სახელი" - ], - "Network": [ - "ქსელი" - ], - "New": [ - "ახალი" - ], - "New LVM volume group": [ - "ახალი LVM-ის ტომების ჯგუფი" - ], - "No": [ - "არა" - ], - "No Wi-Fi supported": [ - "Wi-Fi მხარდაჭერილი არაა" - ], - "No additional partitions will be created": [ - "დამატებითი დანაყოფები არ შეიქმნება" - ], - "No additional software was selected.": [ - "დამატებითი პროგრამები არ არჩეულა." - ], - "No connected yet": [ - "ჯერ მიერთებული არაა" - ], - "No content found": [ - "შემცველობა აღმოჩენილი არაა" - ], - "No device selected yet": [ - "ჯერ მოწყობილობები არჩეული არაა" - ], - "No devices configured yet": [ - "ჯერ მოწყობილობები მორგებული არაა" - ], - "No devices found": [ - "მოწყობილობები აღმოჩენილი არაა" - ], - "No iSCSI targets found.": [ - "პრობლემა iSCSI სამიზნეების აღმოჩენისას." - ], - "No logical volumes are defined yet": [ - "ლოგიკური ტომები ჯერ აღწერილი არაა" - ], - "No partitions will be automatically configured for booting. Use with caution.": [ - "" - ], - "No support is planned.": [ - "მხარდაჭერა დაგეგმილი არაა." - ], - "No user defined yet.": [ - "მომხმარებელი ჯერ აღწერილი არაა." - ], - "No visible Wi-Fi networks found": [ - "ხილული WiFi ქსელები აღმოჩენილი არაა" - ], - "No wired connections found": [ - "მავთულიანი მიერთება აღმოჩენილი არაა" - ], - "No zFCP controllers found.": [ - "zFCP კონტროლერები აღმოჩენილი არაა." - ], - "No zFCP disks found.": [ - "zFCP დისკები აღმოჩენილი არაა." - ], - "None": [ - "არაფერი" - ], - "None of the keymaps match the filter.": [ - "" - ], - "None of the locales match the filter.": [ - "" - ], - "None of the patterns match the filter.": [ - "" - ], - "None of the time zones match the filter.": [ - "" - ], - "Not defined": [ - "აღწერილი არაა" - ], - "Not implemented yet (%s)": [ - "ჯერ განხორციელებული არაა (%s)" - ], - "Not possible with the current setup. Click to know more.": [ - "" - ], - "Not selected yet": [ - "ჯერ არჩეული არაა" - ], - "Not supported (%s)": [ - "მხარდაჭერილი არაა (%s)" - ], - "Offline devices must be activated before formatting them. Please, unselect or activate the devices listed below and try it again": [ - "" - ], - "Offload card": [ - "განტვირთვის ბარათი" - ], - "On boot": [ - "ჩატვირთვისას" - ], - "Only available if authentication by target is provided": [ - "" - ], - "Options toggle": [ - "პარამეტრის გადართვა" - ], - "Other options": [ - "სხვა პარამეტრები" - ], - "Other options toggle": [ - "სხვა პარამეტრის გადართვა" - ], - "Overview": [ - "გადახედვა" - ], - "Package installation failed": [ - "პაკეტის დაყენება ჩავარდა" - ], - "Partition Info": [ - "დანაყოფის ინფორმაცია" - ], - "Partitions": [ - "დანაყოფები" - ], - "Partitions needed for booting will also be adapted": [ - "ასევე მოხდება ჩასატვირთად საჭირო დანაყოფების მორგება" - ], - "Partitions needed for booting will remain at %s": [ - "ჩასატვირთად საჭირო დანაყოფები %s-ზე დარჩება" - ], - "Partitions to boot will be allocated at the following device.": [ - "" - ], - "Partitions to boot will be allocated at the installation disk (%s).": [ - "" - ], - "Partitions to boot will be allocated at the installation disk.": [ - "ჩატვირთვადი დანაყოფები დაყენების დისკზე გამოიყოფა." - ], - "Partitions will be used and created for %s": [ - "" - ], - "Password": [ - "პაროლი" - ], - "Password Required": [ - "პაროლი აუცილებელია" - ], - "Password confirmation": [ - "პაროლის დადასტურება" - ], - "Password input": [ - "პაროლის შეყვანა" - ], - "Password is empty.": [ - "პაროლი ცარიელია." - ], - "Password visibility button": [ - "პაროლის ხილვადობის ღილაკი" - ], - "Passwords do not match": [ - "პაროლები არ ემთხვევა" - ], - "Pending": [ - "დარჩენილია" - ], - "Perform an action": [ - "ქმედების შესრულება" - ], - "PiB": [ - "პიბ" - ], - "Please, cancel and check the settings if you are unsure.": [ - "" - ], - "Please, check whether it is running.": [ - "შეამოწმეთ, გაშვებულია თუ არა ის." - ], - "Please, perform an iSCSI discovery in order to find available iSCSI targets.": [ - "" - ], - "Please, provide its password to log in to the system.": [ - "" - ], - "Please, review provided settings and try again.": [ - "" - ], - "Please, try to activate a zFCP controller.": [ - "" - ], - "Please, try to activate a zFCP disk.": [ - "" - ], - "Port": [ - "პორტი" - ], - "Portal": [ - "პორტალი" - ], - "Pre-installation checks": [ - "დაყენებისწინა შემოწმებები" - ], - "Prefix length or netmask": [ - "პრეფიქსის სიგრძე ან ნეტმასკა" - ], - "Product is already registered": [ - "პროდუქტი უკვე რეგისტრირებულია" - ], - "Protection for the information stored at the new file systems, including data, programs, and system files.": [ - "" - ], - "Provide email address": [ - "შეიყვანეთ ელფოსტის მისამართი" - ], - "Public SSH Key": [ - "საჯარო SSH გასაღები" - ], - "Public SSH Key is empty.": [ - "საჯარო SSH გასაღები ცარიელია." - ], - "Question": [ - "კითხვა" - ], - "Read zFCP devices": [ - "zFCP მოწყობილობების წაკითხვა" - ], - "Reboot": [ - "გადატვირთვა" - ], - "Register": [ - "რესგისტრაცია" - ], - "Registration": [ - "რეგისტრაცია" - ], - "Registration code": [ - "რეგისტრაციის კოდი" - ], - "ReiserFS": [ - "ReiserFS" - ], - "Reload": [ - "თავიდან ჩატვირთვა" - ], - "Reloading data, please wait...": [ - "მიმდინარეობს მონაცემების თავიდან ჩატვირთვა. მოითმინეთ..." - ], - "Remove": [ - "წაშლა" - ], - "Remove max channel filter": [ - "მაქს. არხის ფილტრის მოცილება" - ], - "Remove min channel filter": [ - "მინ. არხის ფილტრის მოცილება" - ], - "Remove the configuration for this device": [ - "ამ მოწყობილობის კონფიგურაციის წაშლა" - ], - "Repository load failed": [ - "რეპოზიტორიის ჩატვირთვა ჩავარდა" - ], - "Reset to defaults": [ - "ნაგულისხმები პარამეტრების დაყენება" - ], - "Reset to the default configuration": [ - "ჩამოყრა ნაგულისხმევ პარამეტრებზე" - ], - "Result": [ - "შედეგი" - ], - "Root authentication methods": [ - "Root-ით ავთენტიკაციის მეთოდები" - ], - "Root user": [ - "Root მომხმარებელი" - ], - "SD Card": [ - "SD ბარათი" - ], - "SSID": [ - "SSID" - ], - "Same as minimum": [ - "იგივე, რაც მინიმალური" - ], - "Search": [ - "ძებნა" - ], - "Security": [ - "უსაფრთხოება" - ], - "See more details": [ - "მეტი დეტალების ნახვა" - ], - "Select": [ - "აირჩიეთ" - ], - "Select a device to configure": [ - "აირჩიეთ მოსარგები მოწყობილობა" - ], - "Select a device to create %s": [ - "" - ], - "Select a device to install the system": [ - "აირჩიეთ მოწყობილობა სისტემის დასაყენებლად" - ], - "Select a disk": [ - "აირჩიეთ დისკი" - ], - "Select a disk to define partitions": [ - "აირჩიეთ დისკი დანაყოფების აღწერისთვის" - ], - "Select a product": [ - "აირჩიეთ პროდუქტი" - ], - "Select another disk to define partitions": [ - "აირჩიეთ სხვა დისკი დანაყოფების აღწერისთვის" - ], - "Select at least one disk.": [ - "აირჩიეთ, სულ ცოტა, ერთი დისკი." - ], - "Select or enter a mount point": [ - "" - ], - "Select or enter a mount point that is not already assigned to another device": [ - "" - ], - "Select or enter a valid mount point": [ - "" - ], - "Select the disk to configure partitions for booting": [ - "აირჩიეთ დისკი ჩატვირთვადი დანაყოფების მოსარგებად" - ], - "Select what to do with each partition in order to find space for allocating the new system.": [ - "" - ], - "Select what to do with each partition.": [ - "აირჩიეთ, რა მოუვა თითოეულ დანაყოფს." - ], - "Selected patterns": [ - "მონიშნული ნიმუშები" - ], - "Server IP": [ - "სერვერის IP" - ], - "Set DIAG Off": [ - "დიაგნოსტიკის გამორთვა" - ], - "Set DIAG On": [ - "დიაგნოსტიკის ჩართვა" - ], - "Set a permanent hostname that won’t change with network updates.": [ - "" - ], - "Several partitions will be deleted": [ - "წაიშლება რამდენიმე დანაყოფი" - ], - "Show": [ - "ჩვენება" - ], - "Show %d subvolume action": [ - "", - "" - ], - "Show information about %s": [ - "ინფორმაციის ჩვენება %s-ის შესახებ" - ], - "Shrink existing partitions": [ - "არსებული დანაყოფების დაპატარავება" - ], - "Size": [ - "ზომა" - ], - "Size limits must be numbers optionally followed by a unit like GiB or GB": [ - "" - ], - "Size options": [ - "ზომის მორგება" - ], - "Sizes must be entered as a numbers optionally followed by a unit.": [ - "" - ], - "Software": [ - "პროგრამები" - ], - "Software %s": [ - "პროგრამული %s" - ], - "Software selection": [ - "პროგრამების არჩევანი" - ], - "Some existing partitions may be shrunk": [ - "ზოგიერთი არსებული დანაყოფი, შეიძლება, დაპატარავდეს" - ], - "Some installation repositories could not be loaded. The system cannot be installed without them.": [ - "" - ], - "Some of the elements in your AutoYaST profile are not supported.": [ - "" - ], - "Some partitions may be deleted": [ - "ზოგიერთი დანაყოფი შეიძლება წაიშალოს" - ], - "Some partitions may be shrunk": [ - "ზოგიერთი დანაყოფი, შეიძლება, შემცირდეს" - ], - "Something went wrong": [ - "რაღაც არასწორია" - ], - "Start configuring a basic installation": [ - "საბაზისო დაყენების მორგების დაწყება" - ], - "Start from scratch with the default configuration": [ - "" - ], - "Startup": [ - "გაშვება" - ], - "Static hostname": [ - "სტატიკური ჰოსტის სახელი" - ], - "Status": [ - "სტატუსი" - ], - "Storage": [ - "საცავი" - ], - "Structure of the new system, including disks to use and additional devices like LVM volume groups.": [ - "" - ], - "Suggested mount points": [ - "ნარჩევი მიმაგრების წერტილები" - ], - "Swap": [ - "Swap" - ], - "TPM sealing requires the new system to be booted directly.": [ - "" - ], - "Target Password": [ - "სამიზნე პაროლი" - ], - "Targets": [ - "სამიზნეები" - ], - "The LVM group '%1$s' will remain at %2$s": [ - "" - ], - "The configured LVM groups will remain at %s": [ - "" - ], - "The configured partitions will be created as logical volumes": [ - "" - ], - "The content may be deleted": [ - "შეიძლება, შემცველობა წაიშალოს" - ], - "The current configuration will result in a %1$s of %2$s.": [ - "" - ], - "The current configuration will result in a %1$s of at least %2$s.": [ - "" - ], - "The current configuration will result in a %1$s with a size between %2$s and %3$s.": [ - "" - ], - "The data is kept, but the current partitions will be resized as needed.": [ - "" - ], - "The data is kept. Only the space not assigned to any partition will be used.": [ - "" - ], - "The device cannot be shrunk:": [ - "მოწყობილობის დაპატარავება შეუძლებელია:" - ], - "The device will be mounted at %s.": [ - "" - ], - "The device will be used by the new system.": [ - "" - ], - "The encryption password did not work": [ - "დაშიფვრის პაროლმა არ იმუშავა" - ], - "The final step to configure the Trusted Platform Module (TPM) to automatically open encrypted devices will take place during the first boot of the new system. For that to work, the machine needs to boot directly to the new boot loader.": [ - "" - ], - "The following software patterns are selected for installation:": [ - "" - ], - "The installation on your machine is complete.": [ - "" - ], - "The installation will take": [ - "დაყენებას დასჭირდება" - ], - "The installation will take %s including:": [ - "დაყენებას დასჭირდება %s ჩათვლით:" - ], - "The installer requires [root] user privileges.": [ - "დაყენების პროგრამას [root] მომხმარებლის პრივილეგიები სჭირდება." - ], - "The logical volume can grow to use all the contiguous free space": [ - "" - ], - "The logical volume can grow until a given limit size": [ - "" - ], - "The logical volume is created exactly with the given size": [ - "" - ], - "The maximum must be a number optionally followed by a unit like GiB or GB": [ - "" - ], - "The minimum cannot be greater than the maximum": [ - "" - ], - "The minimum must be a number optionally followed by a unit like GiB or GB": [ - "" - ], - "The needed LVM physical volumes will be added as partitions on the chosen disks, based on the sizes of the logical volumes. If you select more than one disk, the physical volumes may be distributed along several disks.": [ - "" - ], - "The partition can grow to use all the contiguous free space": [ - "" - ], - "The partition can grow until a given limit size": [ - "" - ], - "The partition is created exactly with the given size": [ - "" - ], - "The password will not be needed to boot and access the data if the TPM can verify the integrity of the system. TPM sealing requires the new system to be booted directly on its first run.": [ - "" - ], - "The size range for %1$s will be dynamically adjusted based on the amount of RAM in the system and the presence of a separate file system for %2$s.": [ - "" - ], - "The size range for %1$s will be dynamically adjusted based on the amount of RAM in the system and the presence of separate file systems for %2$s.": [ - "" - ], - "The size range for %1$s will be dynamically adjusted based on the amount of RAM in the system, the usage of Btrfs snapshots and the presence of a separate file system for %2$s.": [ - "" - ], - "The size range for %1$s will be dynamically adjusted based on the amount of RAM in the system, the usage of Btrfs snapshots and the presence of separate file systems for %2$s.": [ - "" - ], - "The size range for %1$s will be dynamically adjusted based on the presence of a separate file system for %2$s.": [ - "" - ], - "The size range for %1$s will be dynamically adjusted based on the presence of separate file systems for %2$s.": [ - "" - ], - "The size range for %1$s will be dynamically adjusted based on the usage of Btrfs snapshots and the presence of a separate file system for %2$s.": [ - "" - ], - "The size range for %1$s will be dynamically adjusted based on the usage of Btrfs snapshots and the presence of separate file systems for %2$s.": [ - "" - ], - "The size range for %s will be dynamically adjusted based on the amount of RAM in the system and the usage of Btrfs snapshots.": [ - "" - ], - "The size range for %s will be dynamically adjusted based on the usage of Btrfs snapshots.": [ - "" - ], - "The storage configuration is valid (see result below) but uses elements not supported by this interface.": [ - "" - ], - "The storage configuration uses elements not supported by this interface.": [ - "" - ], - "The system does not support Wi-Fi connections, probably because of missing or disabled hardware.": [ - "" - ], - "The system has not been configured for connecting to a Wi-Fi network yet.": [ - "" - ], - "The system will use %s as its default language.": [ - "" - ], - "The zFCP disk was not activated.": [ - "zFCP დისკის გააქტიურება შეუძლებელია." - ], - "There are no disks available for the installation.": [ - "" - ], - "There are not disks available for the installation. You may need to configure some device.": [ - "" - ], - "There are not usable partitions": [ - "გამოყენებადი დანაყოფები აღმოჩენილი არაა" - ], - "These are the most relevant installation settings. Feel free to browse the sections in the menu for further details.": [ - "" - ], - "This action could destroy any data stored on the devices listed below. Please, confirm that you really want to continue.": [ - "" - ], - "This device will contain any partition needed for booting": [ - "ეს მოწყობილობა შეიცავს ნებისმიერ დანაყოფს, რომელიც საჭიროა ჩასატვირთად" - ], - "This device will contain the LVM group '%s'": [ - "" - ], - "This device will contain the LVM group '%s' and any partition needed to boot": [ - "" - ], - "This device will contain the configured LVM groups": [ - "" - ], - "This device will contain the configured LVM groups and any partition needed to boot": [ - "" - ], - "This hostname is dynamic and may change after a reboot or network update, as configured by the local network administrator.": [ - "" - ], - "This product does not allow to select software patterns during installation. However, you can add additional software once the installation is finished.": [ - "" - ], - "This space includes the base system and the selected software patterns, if any.": [ - "" - ], - "This uses existing partitions at the device": [ - "იყენებს მოწყობილობაზე არსებულ დანაყოფებს" - ], - "TiB": [ - "ტიბ" - ], - "Time zone": [ - "დროის სარტყელი" - ], - "Tmpfs": [ - "Tmpfs" - ], - "To ensure the new system is able to boot, the installer may need to create or configure some partitions in the appropriate disk.": [ - "" - ], - "Transactional root file system": [ - "ტრანზაქციული საწყისი ფაილური სისტემა" - ], - "Try again": [ - "თავიდან სცადეთ" - ], - "Type": [ - "ტიპი" - ], - "Unable to modify the settings": [ - "პარამეტრების შეცვლა შეუძლებელია" - ], - "Unselect": [ - "მონიშვნის მოხსნა" - ], - "Unsupported AutoYaST elements": [ - "მხარდაუჭერელი AutoYaST-ის ელემენტები" - ], - "Unused space": [ - "გამოუყენებელი ადგილი" - ], - "Up to %s can be recovered by shrinking the device.": [ - "" - ], - "Updating the hostname now or later will not change the currently registered hostname.": [ - "" - ], - "Upload": [ - "ატვირთვა" - ], - "Upload, paste, or drop an SSH public key": [ - "" - ], - "Use": [ - "გამოყენება" - ], - "Use %s": [ - "%s-ის გამოყენება" - ], - "Use %s for LVM and additional partitions": [ - "" - ], - "Use %s for LVM, additional partitions and booting": [ - "" - ], - "Use %s for additional partitions": [ - "%s-ის გამოყენება დამატებითი დანაყოფებისთვის" - ], - "Use %s for additional partitions and booting": [ - "%s-ის გამოყენება დამატებითი დანაყოფებისთვის და ჩასატვირთად" - ], - "Use %s to configure boot partitions": [ - "%s-ის გამოყენება ჩასატვირთი დანაყოფების მოსარგებად" - ], - "Use %s to host LVM": [ - "%s-ის გამოყენება LVM-ისთვის" - ], - "Use %s to host LVM and boot": [ - "" - ], - "Use %s to install": [ - "%s-ის გამოყენება დასაყენებლად" - ], - "Use %s to install and boot": [ - "" - ], - "Use %s to install and host LVM": [ - "" - ], - "Use %s to install, host LVM and boot": [ - "" - ], - "Use actions below to set up your devices or click %s to start from scratch with the default configuration.": [ - "" - ], - "Use available space": [ - "ხელმისაწვდომი ადგილის გამოყენება" - ], - "Use password": [ - "პაროლის გამოყენება" - ], - "Use public SSH Key": [ - "საჯარო SSH გასაღების გამოყენება" - ], - "Use static hostname": [ - "სტატიკური ჰოსტის სახელის გამოყენება" - ], - "Use suggested username": [ - "მინიშნებული მომხმარებლის სახელის გამოყენება" - ], - "Use the Trusted Platform Module (TPM) to decrypt automatically on each boot": [ - "" - ], - "Used space": [ - "გამოყენებული ადგილი" - ], - "User name": [ - "მომხმარებლის სახელი" - ], - "Username": [ - "მომხმარებლის სახელი" - ], - "Username suggestion dropdown": [ - "მომხმარებლის სახელის მინიშნების ჩამოსაშლელი მენიუ" - ], - "Using a hashed password.": [ - "დაჰეშილი პაროლის გამოყენება." - ], - "Using an existing partition": [ - "არსებული დანაყოფის გამოყენება" - ], - "Using partition %s": [ - "გამოიყენება დანაყოფი %s" - ], - "Using transient hostname: %s": [ - "გამოიყენება გარდამავლი ჰოსტის სახელი: %s" - ], - "Visible Wi-Fi networks": [ - "ხილული WiFi ქსელები" - ], - "Volume group '%s' already exists. Enter a different name.": [ - "" - ], - "WPA & WPA2 Personal": [ - "WPA & WPA2 პერსონალური" - ], - "WPA Password": [ - "WPA პაროლი" - ], - "WWPN": [ - "WWPN" - ], - "Waiting for a mount point": [ - "მიმაგრების წერტილის მოლოდინი" - ], - "Waiting for information about storage configuration": [ - "" - ], - "Wi-Fi": [ - "Wi-Fi" - ], - "WiFi connection form": [ - "WiFi მიერთება წყაროდან" - ], - "Will be supported in a future version.": [ - "" - ], - "Wired": [ - "მავთულიანი" - ], - "XFS": [ - "XFS" - ], - "Yes": [ - "დიახ" - ], - "You can proceed to install with the current settings or you may want to discard the configuration and start from scratch with a simple one.": [ - "" - ], - "You cannot change it later. Go to the %s section if you want to modify it before proceeding with registration.": [ - "" - ], - "You may want to discard the current settings and start from scratch with a simple configuration.": [ - "" - ], - "You may want to discard those settings and start from scratch with a simple configuration.": [ - "" - ], - "ZFCP": [ - "ZFCP" - ], - "at least %s": [ - "%s მაინც" - ], - "auto selected": [ - "ავტომატურად არჩეული" - ], - "configured": [ - "მორგებულია" - ], - "hostname": [ - "ჰოსტის სახელი" - ], - "iBFT": [ - "iBFT" - ], - "iSCSI": [ - "iSCSI" - ], - "logical volume": [ - "ლოგიკური ტომი" - ], - "partition": [ - "დანაყოფი" - ], - "reset to defaults": [ - "ჩამოყრა ნაგულისხმევზე" - ], - "zFCP": [ - "zFCP" - ], - "zFCP Disk Activation": [ - "zFCP დისკის გააქტიურება" - ], - "zFCP Disk activation form": [ - "zFCP დისკის გააქტიურების ფორმა" - ] -}; diff --git a/web/src/po/po.sv.js b/web/src/po/po.sv.js index 21dd4e50db..7a704baaaf 100644 --- a/web/src/po/po.sv.js +++ b/web/src/po/po.sv.js @@ -153,9 +153,6 @@ export default { "Any existing partition will be removed and all data in the disk will be lost.": [ "Alla befintliga partitioner kommer att tas bort och all data på disken kommer att gå förlorad." ], - "As a new partition on %1$s (%2$s)": [ - "Som en ny partition på %1$s (%2$s)" - ], "At least one address must be provided for selected mode": [ "Minst en adress måste tillhandahållas för valt läge" ], @@ -222,6 +219,9 @@ export default { "Before starting the installation, you need to address the following problems:": [ "Innan du startar installationen måste du åtgärda följande problem:" ], + "Beta": [ + "" + ], "BitLocker": [ "BitLocker" ], @@ -288,6 +288,9 @@ export default { "Collapse the list of planned actions": [ "Dölj listan över planerade åtgärder" ], + "Configuration read from the iSCSI Boot Firmware Table (iBFT).": [ + "" + ], "Configure DASD": [ "Konfigurera DASD" ], @@ -435,9 +438,6 @@ export default { "Delete current content": [ "Radera nuvarande innehåll" ], - "Delete the volume group and its logical volumes": [ - "Ta bort volymgruppen och dess logiska volymer" - ], "Delete volume group": [ "Ta bort volymgrupp" ], @@ -489,9 +489,6 @@ export default { "Download logs": [ "Ladda ner loggar" ], - "Drive": [ - "Hårddisk" - ], "During installation, several actions will be performed to setup the layout shown at the table below.": [ "Under installationen kommer flera åtgärder att utföras för att ställa in layouten som visas i tabellen nedan." ], @@ -504,9 +501,6 @@ export default { "Edit connection %s": [ "Redigera anslutning %s" ], - "Edit iSCSI Initiator": [ - "Redigera iSCSI initiativtagare" - ], "Edit user": [ "Redigera användare" ], @@ -561,6 +555,9 @@ export default { "Ext4": [ "Ext4" ], + "Extensions": [ + "" + ], "F2FS": [ "F2FS" ], @@ -658,6 +655,12 @@ export default { "Hostname": [ "Värdnamn" ], + "Hostname could not be updated": [ + "" + ], + "Hostname successfully updated": [ + "" + ], "I have read and accept the [license] for %s": [ "Jag har läst och accepterar [licensen] för %s" ], @@ -700,6 +703,12 @@ export default { "Initiator name": [ "Initiativtagarens namn" ], + "Initiator name could not be updated": [ + "" + ], + "Initiator name successfully updated": [ + "" + ], "Install": [ "Installera" ], @@ -796,6 +805,9 @@ export default { "Limited": [ "Begränsad" ], + "Loading": [ + "Laddar" + ], "Loading data...": [ "Laddar data..." ], @@ -919,9 +931,6 @@ export default { "New": [ "Ny" ], - "New LVM volume group": [ - "Ny LVM volymgrupp" - ], "No": [ "Nej" ], @@ -949,6 +958,9 @@ export default { "No devices found": [ "Inga enheter hittades" ], + "No iSCSI Boot Firmware Table (iBFT) found. The initiator can be configured manually.": [ + "" + ], "No iSCSI targets found.": [ "Inga iSCSI mål hittades." ], @@ -1009,9 +1021,6 @@ export default { "Offline devices must be activated before formatting them. Please, unselect or activate the devices listed below and try it again": [ "Offlineenheter måste aktiveras innan de formateras. Vänligen avmarkera eller aktivera enheterna listade nedan och försök igen" ], - "Offload card": [ - "Avlastningskort" - ], "On boot": [ "Vid uppstart" ], @@ -1144,6 +1153,9 @@ export default { "Reboot": [ "Starta om" ], + "Recommended": [ + "" + ], "Register": [ "Registrera" ], @@ -1171,9 +1183,6 @@ export default { "Remove min channel filter": [ "Ta bort minimum kanal filter" ], - "Remove the configuration for this device": [ - "Ta bort konfigurationen för den här enheten" - ], "Repository load failed": [ "Det gick inte att ladda förråd" ], @@ -1213,15 +1222,6 @@ export default { "Select": [ "Välj" ], - "Select a device to configure": [ - "Välj en enhet att konfigurera" - ], - "Select a device to create %s": [ - "Välj en enhet för att skapa %s" - ], - "Select a device to install the system": [ - "Välj en enhet för att installera systemet" - ], "Select a disk": [ "Välj en disk" ], @@ -1255,6 +1255,9 @@ export default { "Select what to do with each partition.": [ "Välj vad som ska göras med varje partition." ], + "Selected disk (cannot be changed)": [ + "" + ], "Selected patterns": [ "Valda mönster" ], @@ -1367,9 +1370,6 @@ export default { "The configured LVM groups will remain at %s": [ "De konfigurerade LVM-grupperna kommer att finnas kvar på %s" ], - "The configured partitions will be created as logical volumes": [ - "De konfigurerade partitionerna kommer att skapas som logiska volymer" - ], "The content may be deleted": [ "Innehållet kan komma att raderas" ], @@ -1397,6 +1397,12 @@ export default { "The device will be used by the new system.": [ "Enheten kommer att användas av det nya systemet." ], + "The disk is used for LVM": [ + "" + ], + "The disk is used for booting": [ + "" + ], "The encryption password did not work": [ "Krypteringslösenordet fungerade inte" ], @@ -1514,20 +1520,8 @@ export default { "This action could destroy any data stored on the devices listed below. Please, confirm that you really want to continue.": [ "Denna åtgärd kan förstöra all data som lagras på enheterna som anges nedan. Vänligen bekräfta att du verkligen vill fortsätta." ], - "This device will contain any partition needed for booting": [ - "Den här enheten kommer att innehålla alla partitioner som behövs för uppstart" - ], - "This device will contain the LVM group '%s'": [ - "Den här enheten kommer att innehålla LVM-gruppen '%s'" - ], - "This device will contain the LVM group '%s' and any partition needed to boot": [ - "Den här enheten kommer att innehålla LVM-gruppen '%s' och vilken partition som helst som behövs för att starta systemet" - ], - "This device will contain the configured LVM groups": [ - "Den här enheten kommer att innehålla de konfigurerade LVM-grupperna" - ], - "This device will contain the configured LVM groups and any partition needed to boot": [ - "Den här enheten kommer att innehålla de konfigurerade LVM-grupperna och alla partitioner som behövs för att starta systemet" + "This extension is not available on the server. Ask the server administrator to mirror the extension.": [ + "" ], "This hostname is dynamic and may change after a reboot or network update, as configured by the local network administrator.": [ "Detta värdnamn är dynamiskt och kan ändras efter en omstart eller nätverksuppdatering, som konfigurerats av den lokala nätverksadministratören." @@ -1538,9 +1532,6 @@ export default { "This space includes the base system and the selected software patterns, if any.": [ "Detta utrymme inkluderar bassystemet och de valda programvarumönsterna, om några." ], - "This uses existing partitions at the device": [ - "Detta använder befintliga partitioner på enheten" - ], "TiB": [ "TiB" ], diff --git a/web/src/po/po.uk.js b/web/src/po/po.uk.js index 20e4e1c07a..19c926c8f5 100644 --- a/web/src/po/po.uk.js +++ b/web/src/po/po.uk.js @@ -99,6 +99,9 @@ export default { "Add another partition or mount an existing one": [ "Додати новий розділ або змонтувати наявний" ], + "Add device menu": [ + "" + ], "Add logical volume": [ "" ], @@ -132,9 +135,6 @@ export default { "Any existing partition will be removed and all data in the disk will be lost.": [ "Всі розділи буде видалено, а всі дані на диску буде втрачено." ], - "As a new partition on %1$s (%2$s)": [ - "Як новий розділ на %1$s (%2$s)" - ], "At least one address must be provided for selected mode": [ "Для обраного режиму має бути вказана принаймні одна адреса" ], @@ -192,6 +192,9 @@ export default { "Before starting the installation, you need to address the following problems:": [ "До початку встановлення потрібно усунути такі проблеми:" ], + "Beta": [ + "" + ], "BitLocker": [ "BitLocker" ], @@ -225,6 +228,9 @@ export default { "Change boot options": [ "Змінити параметри завантаження" ], + "Change device menu": [ + "" + ], "Change product": [ "Змінити продукт" ], @@ -258,6 +264,9 @@ export default { "Collapse the list of planned actions": [ "Згорнути список запланованих дій" ], + "Configuration read from the iSCSI Boot Firmware Table (iBFT).": [ + "" + ], "Configure DASD": [ "Налаштувати DASD" ], @@ -393,9 +402,6 @@ export default { "Delete current content": [ "Видалити поточний вміст" ], - "Delete the volume group and its logical volumes": [ - "" - ], "Destroy current data and format partition as": [ "Знищити поточні дані і відформатувати розділ як" ], @@ -444,9 +450,6 @@ export default { "Download logs": [ "Завантажити журнали" ], - "Drive": [ - "Накопичувач" - ], "During installation, several actions will be performed to setup the layout shown at the table below.": [ "Під час інсталяції буде виконано кілька дій, щоб налаштувати схему, як показано в таблиці нижче." ], @@ -459,9 +462,6 @@ export default { "Edit connection %s": [ "Редагувати з'єднання %s" ], - "Edit iSCSI Initiator": [ - "Змінити ініціатор iSCSI" - ], "Edit user": [ "Змінити користувача" ], @@ -504,6 +504,9 @@ export default { "Ext4": [ "Ext4" ], + "Extensions": [ + "" + ], "F2FS": [ "F2FS" ], @@ -599,6 +602,12 @@ export default { "Hostname": [ "Ім'я хоста" ], + "Hostname could not be updated": [ + "" + ], + "Hostname successfully updated": [ + "" + ], "I have read and accept the [license] for %s": [ "Я прочитав і приймаю [license] на %s" ], @@ -641,6 +650,12 @@ export default { "Initiator name": [ "Ім'я ініціатора" ], + "Initiator name could not be updated": [ + "" + ], + "Initiator name successfully updated": [ + "" + ], "Install": [ "Встановити" ], @@ -848,9 +863,6 @@ export default { "New": [ "Новий" ], - "New LVM volume group": [ - "Нова група томів LVM" - ], "No": [ "Ні" ], @@ -875,6 +887,9 @@ export default { "No devices found": [ "Пристроїв не знайдено" ], + "No iSCSI Boot Firmware Table (iBFT) found. The initiator can be configured manually.": [ + "" + ], "No iSCSI targets found.": [ "Цілі iSCSI не знайдені." ], @@ -932,9 +947,6 @@ export default { "Offline devices must be activated before formatting them. Please, unselect or activate the devices listed below and try it again": [ "Перед форматуванням автономних пристроїв їх необхідно активувати. Будь ласка, скасуйте вибір або активацію пристроїв, перелічених нижче, і повторіть спробу" ], - "Offload card": [ - "Картка вивантаження" - ], "On boot": [ "При завантаженні" ], @@ -1061,6 +1073,9 @@ export default { "Reboot": [ "Перезавантажити" ], + "Recommended": [ + "" + ], "Register": [ "Зареєструвати" ], @@ -1088,9 +1103,6 @@ export default { "Remove min channel filter": [ "Видалити фільтр за мінімальним каналом" ], - "Remove the configuration for this device": [ - "Видалити конфігурацію для цього пристрою" - ], "Repository load failed": [ "Не вдалося завантажити репозиторій" ], @@ -1130,15 +1142,6 @@ export default { "Select": [ "Вибір" ], - "Select a device to configure": [ - "Виберіть пристрій для налаштування" - ], - "Select a device to create %s": [ - "Виберіть пристрій для створення %s" - ], - "Select a device to install the system": [ - "Виберіть пристрій для встановлення системи" - ], "Select a disk": [ "Оберіть диск" ], @@ -1166,6 +1169,9 @@ export default { "Select what to do with each partition.": [ "Оберіть, що робити з кожним розділом." ], + "Selected disk (cannot be changed)": [ + "" + ], "Selected patterns": [ "Обрані шаблони" ], @@ -1273,9 +1279,6 @@ export default { "The configured LVM groups will remain at %s": [ "Налаштовані групи LVM залишаться у %s" ], - "The configured partitions will be created as logical volumes": [ - "Налаштовані розділи буде створено як логічні томи" - ], "The content may be deleted": [ "Вміст може бути видалений" ], @@ -1294,6 +1297,12 @@ export default { "The device will be used by the new system.": [ "Пристрій буде використовуватися новою системою." ], + "The disk is used for LVM": [ + "" + ], + "The disk is used for booting": [ + "" + ], "The encryption password did not work": [ "Пароль шифрування не спрацював" ], @@ -1402,20 +1411,8 @@ export default { "This action could destroy any data stored on the devices listed below. Please, confirm that you really want to continue.": [ "Ця дія може знищити будь-які дані, що зберігаються на перелічених нижче пристроях. Будь ласка, підтвердьте, що Ви дійсно хочете продовжити." ], - "This device will contain any partition needed for booting": [ - "Цей пристрій буде містити будь-який розділ, необхідний для завантаження" - ], - "This device will contain the LVM group '%s'": [ - "Цей пристрій міститиме групу LVM '%s'" - ], - "This device will contain the LVM group '%s' and any partition needed to boot": [ - "Цей пристрій міститиме групу LVM '%s' і будь-який розділ, необхідний для завантаження" - ], - "This device will contain the configured LVM groups": [ - "Цей пристрій міститиме налаштовані групи LVM" - ], - "This device will contain the configured LVM groups and any partition needed to boot": [ - "Цей пристрій міститиме налаштовані групи LVM і будь-який розділ, необхідний для завантаження" + "This extension is not available on the server. Ask the server administrator to mirror the extension.": [ + "" ], "This hostname is dynamic and may change after a reboot or network update, as configured by the local network administrator.": [ "Це ім'я хоста є динамічним і може змінитися після перезавантаження або оновлення мережі, як це налаштовано адміністратором локальної мережі." @@ -1426,9 +1423,6 @@ export default { "This space includes the base system and the selected software patterns, if any.": [ "Цей простір включає базову систему та вибрані програмні шаблони, якщо такі є." ], - "This uses existing partitions at the device": [ - "Для цього використовуються наявні розділи на пристрої" - ], "TiB": [ "ТіБ" ],