Skip to content

Latest commit

 

History

History
108 lines (82 loc) · 8.94 KB

README.md

File metadata and controls

108 lines (82 loc) · 8.94 KB

blobfuse

About

blobfuse is an open source project developed to provide a virtual filesystem backed by the Azure Blob storage. It uses the libfuse open source library to communicate with the Linux FUSE kernel module, and implements the filesystem operations using the Azure Storage Blob REST APIs.

Blobfuse is stable, and is supported by Azure Storage given that it is used within its limits documented here. Please submit an issue here for any issues/requests/questions.

Features

  • Mount a Blob storage container on Linux
  • Basic file system operations such as mkdir, opendir, readdir, rmdir, open, read, create, write, close, unlink, truncate, stat, rename
  • Local cache to improve subsequent access times
  • Parallel download and upload features for fast access to large blobs
  • Allows multiple nodes to mount the same container for read-only scenarios.

Installation

You can install blobfuse from the Linux Software Repository for Microsoft products. The process is explained in the blobfuse installation page. Alternatively, you can clone this repository, install the dependencies (fuse, libcurl, gcrypt and GnuTLS) and build from source code. See details in the wiki.

Usage

Mounting

Once you have installed blobfuse, configure your account credentials either in the template provided in blobfuse folder (connection.cfg), or in the environment variables. For brevity, let's use the environment variables:

export AZURE_STORAGE_ACCOUNT=myaccountname
export AZURE_STORAGE_ACCESS_KEY=myaccountkey

Use of a high performance disk, or ramdisk for the local cache is recommended. In Azure VMs, this is the ephemeral disk which is mounted on /mnt in Ubuntu, and /mnt/resource in RHEL. Please make sure that your user has write access to this location. If not, create and chown to your user.

mkdir -p /mnt/blobfusetmp
chown <myuser> /mnt/blobfusetmp

Create your mountpoint (mkdir /path/to/mount) and mount a Blob container (must already exist) with blobfuse:

blobfuse /path/to/mount --container-name=mycontainer --tmp-path=/mnt/blobfusetmp

NOTE Use absolute paths for directory paths in the command. Relative, and shortcut paths (~/) do not work.

For more information, see the wiki

Mount Options

  • All options for the FUSE module is described in the FUSE man page
  • See mount.sh provided in this repository for a sample of most used options
  • In addition to the FUSE module options; blobfuse offers following options:
    • --tmp-path=/path/to/cache : Configures the tmp location for the cache. Always configure the fastest disk (SSD or ramdisk) for best performance.
    • [OPTIONAL] --config-file=/path/to/connection.cfg : Configures the path for the file where the account credentials are provided
    • [OPTIONAL] --container-name=container : Required if no configuration file is specified. Also set account name and key/SAS via the environment variables AZURE_STORAGE_ACCOUNT and AZURE_STORAGE_ACCESS_KEY/AZURE_STORAGE_SAS_TOKEN
    • [OPTIONAL] --use-https=true|false : Enables HTTPS communication with Blob storage. True by default.
    • [OPTIONAL] --file-cache-timeout-in-seconds=120 : Blobs will be cached in the temp folder for this many seconds. 120 seconds by default. During this time, blobfuse will not check whether the file is up to date or not.
    • [OPTIONAL] --log-level=LOG_WARNING : Enables logs written to syslog. Set to LOG_WARNING by default. Allowed values are LOG_OFF|LOG_CRIT|LOG_ERR|LOG_WARNING|LOG_INFO|LOG_DEBUG
    • [OPTIONAL] --use-attr-cache=true|false : Enables attributes of a blob being cached. False by default. (Only available in blobfuse 1.1.0 or above)

Considerations

Design

  • When blobfuse receives an 'open' request for a file, it will block and download the entire content of the blob down to the cache location specified in --tmp-path
  • All read and writes will go to the cache location when the file is open
  • When blobfuse receives a 'close' request for the file, it will block and upload the entire content to Blob storage, and return success/failure to the 'close' call.
  • If blobfuse receives another open request within --file-cache-timeout-in-seconds, it will simply use the existing file in the local cache rather than downloading the file again from Blob storage.
  • Files in the cache (--tmp-path) will be deleted after --file-cache-timeout-in-seconds. Make sure to configure your tmp path with enough space to accomodate this behavior, or set --file-cache-timeout-in-seconds to 0 to accelerate deletion of cached files.

Performance and caching

Please take careful note of the following points, before using blobfuse:

  • In order to achieve reasonable performance, blobfuse requires a temporary directory to use as a local cache. This directory will contain the full contents of any file (blob) read to or written from through blobfuse. Cached files will be purged as they age (--file-cache-timeout-in-seconds) if there are no longer open file handles to them.
    • Putting the cache directory on a ramdisk, or on an SSD (ephemeral disk on Azure) will greatly enhance performance.
    • Blobfuse currently does not manage available disk space in the tmp path. Make sure to have enough space, or reduce --file-cache-timeout-in-seconds value to accelerating purging cached files.
    • In order to delete the cache, un-mount and re-mount blobfuse.
    • Do not use the same cache directory for multiple instances of blobfuse, or for any other purpose while blobfuse is running.

If your workload is read-only:

  • Because blobs get cached locally and reused for a number of seconds (--file-cache-timeout-in-seconds), if the blob on the service is modified, these changes will only be retrieved after the local cache times out, and the file is closed and re-opened.
  • By setting --file-cache-timeout-in-seconds to 0, you may achieve close-to-open cache consistency like in NFS v3. This means once a file is closed, subsequent opens will see the latest changes from the Blob storage service ignoring the local cache.

If your workload is NOT read-only:

  • Do not edit, modify, or delete the contents of the temp directory while blobfuse is mounted. Doing so could cause data loss or data corruption.
  • While a container is mounted, the data in the container should not be modified by any process other than blobfuse. This includes other instances of blobfuse, running on this or other machines. Doing so could cause data loss or data corruption. Mounting other containers is fine.
  • Modifications to files are not persisted to Azure Blob storage until the file is closed. If multiple handles are open to a file simultaneously, and data in the file has been modified, the close of each handle will flush the file to blob storage.

Syslog security warning

By default, blobfuse will log to syslog. The default settings will, in some cases, log relevant file paths to syslog. If this is sensitive information, turn off logging completely. See the wiki for more details.

Current Limitations

  • Some file system APIs have not been implemented: readlink, symlink, link, chmod, chown, fsync, lock and extended attribute calls.
  • Not optimized for updating an existing file. blobfuse downloads the entire file to local cache to be able to modify and update the file
  • When using enabling the "--use-attr-cache" feature, there may be an issue with overflow and will not clear the attribute cache until blobfuse is unmounted
  • See the list of differences between POSIX and blobfuse here

License

This project is licensed under MIT.

Contributing

This project welcomes contributions and suggestions. Most contributions require you to agree to a Contributor License Agreement (CLA) declaring that you have the right to, and actually do, grant us the rights to use your contribution. For details, visit https://cla.microsoft.com.

When you submit a pull request, a CLA-bot will automatically determine whether you need to provide a CLA and decorate the PR appropriately (e.g., label, comment). Simply follow the instructions provided by the bot. You will only need to do this once across all repos using our CLA.

This project has adopted the Microsoft Open Source Code of Conduct. For more information see the Code of Conduct FAQ or contact [email protected] with any additional questions or comments.