Hyperion is basicly a server service which is running on for example a Raspberry Pi connecting to LED stripes to get an ambilight like Philipps TVs have. The main page of this project: https://github.com/hyperion-project/hyperion.ng Here is a simple HowTo-Build tutorial: https://github.com/TBSniller/piccap/blob/main/DIY_Ambilight.md
The main idea of this is, to have a simple frontend app with autostart feature for the hyperion-webos executable firstly developed by mariotaku here: https://github.com/webosbrew/hyperion-webos and also ported to newer TVs here: https://github.com/TBSniller/hyperion-webos
I'm not a real programmer and all this stuff is really new to me. The only reason this exists, is because I just badly wanted it for any cost. Feel free to create an issue or pull request if you can make things better.
This app is still in very early development.
I think a picture describes what's going on:
Limiting FPS isn't working.
Libvt (old version) may not running on all TVs, if you get the status capture running: true, but Hyperion seems to be black, its an issue with the hyperion-webos_libvt binary and not this application.
Libvt (old version) can cause HDMI flickering. To get rid from it again, the TV has to be fully rebooted.
At this time root is neccessary. You will also have the Homebrew Channel installed: https://github.com/webosbrew/webos-homebrew-channel
You should also know what you are doing and should have basic knowledge about all this root stuff, because you can brick your TV and I wouldn't take any responsibilty if you did so. Mainly this isn't the case, but you have been warned.
You have to edit the permission file for the Homebrew Channel, to make it's service available to others:
Connect to your TV with SSH.
Open /var/luna-service2-dev/api-permissions.d/org.webosbrew.hbchannel.service.api.json with
vi /var/luna-service2-dev/api-permissions.d/org.webosbrew.hbchannel.service.api.json
Press 'a' to get into editmode and change org.webosbrew.hbchannel.service.group to public, so you have the following text in this file:
{ "public": [ "org.webosbrew.hbchannel.service/*" ], "ares.webos.cli": [ "org.webosbrew.hbchannel.service/*" ] }
Press 'ESC' to exit editmode, save with typing :wq! and pressing 'Enter'. Simply reboot your TV after that.
You can also run this command:
sed -i 's/org.webosbrew.hbchannel.service.group/public/g' /var/luna-service2-dev/api-permissions.d/org.webosbrew.hbchannel.service.api.json; reboot
And check after reboot:
cat /var/luna-service2-dev/api-permissions.d/org.webosbrew.hbchannel.service.api.json
Wait a few secounds to let the service elevate root permissions through the Homebrew Channel-Service. After that do a full reboot (no powercycle) of your TV using SSH and typing the reboot command, or removing the power source for a few secounds. The app will tell you when it's ready to get rebooted.
Actually we reversed four different librarys which are used by LG TVs to capture the screen. That's why this app covers two different ways of handling these librarys.
For older TVs (~2020 and before) it is libvt for capturing video and libgm for capturing the UI.
On newer TVs (~2020 and after) it is libvtcapture for capturing video and libhalgal for capturing the UI.
For using libvtcapture LG started to do some permission handling, so we need to do this also for our custom executeable. Just see piccap.service/setlibvtcaptureperms.sh to get an idea.
You can also find some information about these librarys here: https://github.com/webosbrew/tv-native-apis
Simply fill in your parameters and press save. The configuration files will then be saved to /var/luna/preferences/ and reloaded to the application.
Simply press start after the application ended loading (~30 secounds after start).
Download the ipk from releases or build it all yourself.
Then using ares:
cmd.exe /c E:\webOS_TV_SDK\CLI\bin\ares-install.cmd -d YOURTV E:\Downloads\org.webosbrew.piccap_0.0.8_all.ipk
Or manually:
Copy to TV:
scp /home/USER/downloads/org.webosbrew.piccap_0.0.8_all.ipk root@TVIP:/tmp/org.webosbrew.piccap_0.0.8_all.ipk
or download:
wget -P /tmp https://github.com/TBSniller/piccap/releases/download/testing/org.webosbrew.piccap_0.0.8_all.ipk
And installing on TV using:
luna-send -i -f luna://com.webos.appInstallService/dev/install '{"id":"org.webosbrew.p iccap","ipkUrl":"/tmp/org.webosbrew.piccap_0.0.8_all.ipk","subscribe":true}'
Put both compiled versions of hyperion-webos versions in service folder.
libvt (https://github.com/webosbrew/hyperion-webos): service/piccap.service/hyperion-webos_libvt
libvtcapture (https://github.com/TBSniller/hyperion-webos): service/piccap.service/hyperion-webos_libvtcapture
mkdir build
cd service
npm install
npm run build
cd ..
ares-package ./piccap ./service/piccap.service -o build
As stated in the application:
Love to Mariotaku https://github.com/mariotaku
Love to JohnPaul https://github.com/Informatic
Love to OpenLG-Discord https://discord.gg/9sqAgHVRhP
All this wouldn't be possible without them!
Obvously WebOS SDK from LG https://webostv.developer.lge.com/sdk/installation/download-installer/ Application design easily created with https://nicepage.com/html-website-builder