x86 router cannot boot plugging in the network cable, boot with wrong eth0

[taylord0ng]

Current Behavior

openmptcprouter x86 router cannot boot plugging in the network cable, boot with wrong eth0

When I connected the network cable to start, it was unavailable after startup.

It started without the network cable, and then it worked fine after plugging in the network cable.

I compared the dmesg and ifconfig information when the network cable was connected and not connected, and I found that the eth1 that failed to start was incorrectly bound to the wan port network card (00:0B:00:F8:AE:DB), and the wan port network card should have been bound to eth0

compared the dmesg and ifconfig information(right
is success log)
https://www.diffchecker.com/qBlFLXVK/

Specifications

• OpenMPTCProuter version: openmptcprouter-v0.61-6.6-r0+27346-c7ba5574f5-x86-64-generic-ext4-combined.img.gz
• OpenMPTCProuter VPS version: not boot success
• OpenMPTCProuter VPS provider: not boot success
• OpenMPTCProuter platform: x86-64

[taylord0ng]

fail.txt
success.txt

[github-actions]

This issue is stale because it has been open 90 days with no activity. Remove stale label or comment or this will be closed in 5 days