install.sh

#!/usr/bin/env bash
# 检测区
# -------------------------------------------------------------
# 检查系统
export LANG=en_US.UTF-8

echoContent() {
    case $1 in
    # 红色
    "red")
        # shellcheck disable=SC2154
        ${echoType} "\033[31m${printN}$2 \033[0m"
        ;;
        # 天蓝色
    "skyBlue")
        ${echoType} "\033[1;36m${printN}$2 \033[0m"
        ;;
        # 绿色
    "green")
        ${echoType} "\033[32m${printN}$2 \033[0m"
        ;;
        # 白色
    "white")
        ${echoType} "\033[37m${printN}$2 \033[0m"
        ;;
    "magenta")
        ${echoType} "\033[31m${printN}$2 \033[0m"
        ;;
        # 黄色
    "yellow")
        ${echoType} "\033[33m${printN}$2 \033[0m"
        ;;
    esac
}
checkSystem() {
    if [[ -n $(find /etc -name "redhat-release") ]] || grep </proc/version -q -i "centos"; then
        mkdir -p /etc/yum.repos.d

        if [[ -f "/etc/centos-release" ]]; then
            centosVersion=$(rpm -q centos-release | awk -F "[-]" '{print $3}' | awk -F "[.]" '{print $1}')

            if [[ -z "${centosVersion}" ]] && grep </etc/centos-release -q -i "release 8"; then
                centosVersion=8
            fi
        fi

        release="centos"
        installType='yum -y install'
        removeType='yum -y remove'
        upgrade="yum update -y --skip-broken"

    elif grep </etc/issue -q -i "debian" && [[ -f "/etc/issue" ]] || grep </etc/issue -q -i "debian" && [[ -f "/proc/version" ]]; then
        release="debian"
        installType='apt -y install'
        upgrade="apt update"
        updateReleaseInfoChange='apt-get --allow-releaseinfo-change update'
        removeType='apt -y autoremove'

    elif grep </etc/issue -q -i "ubuntu" && [[ -f "/etc/issue" ]] || grep </etc/issue -q -i "ubuntu" && [[ -f "/proc/version" ]]; then
        release="ubuntu"
        installType='apt -y install'
        upgrade="apt update"
        updateReleaseInfoChange='apt-get --allow-releaseinfo-change update'
        removeType='apt -y autoremove'
        if grep </etc/issue -q -i "16."; then
            release=
        fi
    fi

    if [[ -z ${release} ]]; then
        echoContent red "\n本脚本不支持此系统，请将下方日志反馈给开发者\n"
        echoContent yellow "$(cat /etc/issue)"
        echoContent yellow "$(cat /proc/version)"
        exit 0
    fi
}

# 检查CPU提供商
checkCPUVendor() {
    if [[ -n $(which uname) ]]; then
        if [[ "$(uname)" == "Linux" ]]; then
            case "$(uname -m)" in
            'amd64' | 'x86_64')
                xrayCoreCPUVendor="Xray-linux-64"
                v2rayCoreCPUVendor="v2ray-linux-64"
                hysteriaCoreCPUVendor="hysteria-linux-amd64"
                ;;
            'armv8' | 'aarch64')
                xrayCoreCPUVendor="Xray-linux-arm64-v8a"
                v2rayCoreCPUVendor="v2ray-linux-arm64-v8a"
                hysteriaCoreCPUVendor="hysteria-linux-arm64"
                ;;
            *)
                echo "  不支持此CPU架构--->"
                exit 1
                ;;
            esac
        fi
    else
        echoContent red "  无法识别此CPU架构，默认amd64、x86_64--->"
        xrayCoreCPUVendor="Xray-linux-64"
        v2rayCoreCPUVendor="v2ray-linux-64"
    fi
}

# 初始化全局变量
initVar() {
    installType='yum -y install'
    removeType='yum -y remove'
    upgrade="yum -y update"
    echoType='echo -e'

    # 核心支持的cpu版本
    xrayCoreCPUVendor=""
    v2rayCoreCPUVendor=""
    hysteriaCoreCPUVendor=""

    # 域名
    domain=

    # CDN节点的address
    add=

    # 安装总进度
    totalProgress=1

    # 1.xray-core安装
    # 2.v2ray-core 安装
    # 3.v2ray-core[xtls] 安装
    coreInstallType=

    # 核心安装path
    # coreInstallPath=

    # v2ctl Path
    ctlPath=
    # 1.全部安装
    # 2.个性化安装
    # v2rayAgentInstallType=

    # 当前的个性化安装方式 01234
    currentInstallProtocolType=

    # 当前alpn的顺序
    currentAlpn=

    # 前置类型
    frontingType=

    # 选择的个性化安装方式
    selectCustomInstallType=

    # v2ray-core、xray-core配置文件的路径
    configPath=

    # hysteria 配置文件的路径
    hysteriaConfigPath=

    # 配置文件的path
    currentPath=

    # 配置文件的host
    currentHost=

    # 安装时选择的core类型
    selectCoreType=

    # 默认core版本
    v2rayCoreVersion=

    # 随机路径
    customPath=

    # centos version
    centosVersion=

    # UUID
    currentUUID=

    # previousClients
    previousClients=

    localIP=

    # 集成更新证书逻辑不再使用单独的脚本--RenewTLS
    renewTLS=$1

    # tls安装失败后尝试的次数
    installTLSCount=

    # BTPanel状态
    #	BTPanelStatus=

    # nginx配置文件路径
    nginxConfigPath=/etc/nginx/conf.d/

    # 是否为预览版
    prereleaseStatus=false

    # ssl类型
    sslType=

    # ssl邮箱
    sslEmail=

    # 检查天数
    sslRenewalDays=90

    # dns ssl状态
    dnsSSLStatus=

    # dns tls domain
    dnsTLSDomain=

    # 该域名是否通过dns安装通配符证书
    installDNSACMEStatus=

    # 自定义端口
    customPort=

    # hysteria端口
    hysteriaPort=

    # hysteria协议
    hysteriaProtocol=

    # hysteria延迟
    hysteriaLag=

    # hysteria下行速度
    hysteriaClientDownloadSpeed=

    # hysteria上行速度
    hysteriaClientUploadSpeed=

}

# 读取tls证书详情
readAcmeTLS() {
    if [[ -n "${currentHost}" ]]; then
        dnsTLSDomain=$(echo "${currentHost}" | awk -F "[.]" '{print $(NF-1)"."$NF}')
    fi
    if [[ -d "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc" && -f "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc/*.${dnsTLSDomain}.key" && -f "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc/*.${dnsTLSDomain}.cer" ]]; then
        installDNSACMEStatus=true
    fi
}
# 读取默认自定义端口
readCustomPort() {
    if [[ -n "${configPath}" ]]; then
        local port=
        port=$(jq -r .inbounds[0].port "${configPath}${frontingType}.json")
        if [[ "${port}" != "443" ]]; then
            customPort=${port}
        fi
    fi
}
# 检测安装方式
readInstallType() {
    coreInstallType=
    configPath=
    hysteriaConfigPath=

    # 1.检测安装目录
    if [[ -d "/etc/v2ray-agent" ]]; then
        # 检测安装方式 v2ray-core
        if [[ -d "/etc/v2ray-agent/v2ray" && -f "/etc/v2ray-agent/v2ray/v2ray" && -f "/etc/v2ray-agent/v2ray/v2ctl" ]]; then
            if [[ -d "/etc/v2ray-agent/v2ray/conf" && -f "/etc/v2ray-agent/v2ray/conf/02_VLESS_TCP_inbounds.json" ]]; then
                configPath=/etc/v2ray-agent/v2ray/conf/
                if grep </etc/v2ray-agent/v2ray/conf/02_VLESS_TCP_inbounds.json -q '"security": "tls"'; then
                    coreInstallType=2
                    ctlPath=/etc/v2ray-agent/v2ray/v2ctl
                fi
            fi
        fi

        if [[ -d "/etc/v2ray-agent/xray" && -f "/etc/v2ray-agent/xray/xray" ]]; then
            # 这里检测xray-core
            if [[ -d "/etc/v2ray-agent/xray/conf" ]] && [[ -f "/etc/v2ray-agent/xray/conf/02_VLESS_TCP_inbounds.json" || -f "/etc/v2ray-agent/xray/conf/02_trojan_TCP_inbounds.json" ]]; then
                # xray-core
                configPath=/etc/v2ray-agent/xray/conf/
                ctlPath=/etc/v2ray-agent/xray/xray
                coreInstallType=1
            fi
        fi

        if [[ -d "/etc/v2ray-agent/hysteria" && -f "/etc/v2ray-agent/hysteria/hysteria" ]]; then
            # 这里检测 hysteria
            if [[ -d "/etc/v2ray-agent/hysteria/conf" ]] && [[ -f "/etc/v2ray-agent/hysteria/conf/config.json" ]] && [[ -f "/etc/v2ray-agent/hysteria/conf/client_network.json" ]]; then
                hysteriaConfigPath=/etc/v2ray-agent/hysteria/conf/
            fi
        fi

    fi
}

# 读取协议类型
readInstallProtocolType() {
    currentInstallProtocolType=

    while read -r row; do
        if echo "${row}" | grep -q 02_trojan_TCP_inbounds; then
            currentInstallProtocolType=${currentInstallProtocolType}'trojan'
            frontingType=02_trojan_TCP_inbounds
        fi
        if echo "${row}" | grep -q VLESS_TCP_inbounds; then
            currentInstallProtocolType=${currentInstallProtocolType}'0'
            frontingType=02_VLESS_TCP_inbounds
        fi
        if echo "${row}" | grep -q VLESS_WS_inbounds; then
            currentInstallProtocolType=${currentInstallProtocolType}'1'
        fi
        if echo "${row}" | grep -q trojan_gRPC_inbounds; then
            currentInstallProtocolType=${currentInstallProtocolType}'2'
        fi
        if echo "${row}" | grep -q VMess_WS_inbounds; then
            currentInstallProtocolType=${currentInstallProtocolType}'3'
        fi
        if echo "${row}" | grep -q 04_trojan_TCP_inbounds; then
            currentInstallProtocolType=${currentInstallProtocolType}'4'
        fi
        if echo "${row}" | grep -q VLESS_gRPC_inbounds; then
            currentInstallProtocolType=${currentInstallProtocolType}'5'
        fi
    done < <(find ${configPath} -name "*inbounds.json" | awk -F "[.]" '{print $1}')

    if [[ -n "${hysteriaConfigPath}" ]]; then
        currentInstallProtocolType=${currentInstallProtocolType}'6'
    fi
}

# 检查是否安装宝塔
checkBTPanel() {
    if pgrep -f "BT-Panel"; then
        nginxConfigPath=/www/server/panel/vhost/nginx/
        #		BTPanelStatus=true
    fi
}
# 读取当前alpn的顺序
readInstallAlpn() {
    if [[ -n ${currentInstallProtocolType} ]]; then
        local alpn
        alpn=$(jq -r .inbounds[0].streamSettings.tlsSettings.alpn[0] ${configPath}${frontingType}.json)
        if [[ -n ${alpn} ]]; then
            currentAlpn=${alpn}
        fi
    fi
}

# 检查防火墙
allowPort() {
    local type=$2
    if [[ -z ${type} ]]; then
        type=tcp
    fi
    # 如果防火墙启动状态则添加相应的开放端口
    if systemctl status netfilter-persistent 2>/dev/null | grep -q "active (exited)"; then
        local updateFirewalldStatus=
        if ! iptables -L | grep -q "$1(mack-a)"; then
            updateFirewalldStatus=true
            iptables -I INPUT -p ${type} --dport "$1" -m comment --comment "allow $1(mack-a)" -j ACCEPT
        fi

        if echo "${updateFirewalldStatus}" | grep -q "true"; then
            netfilter-persistent save
        fi
    elif systemctl status ufw 2>/dev/null | grep -q "active (exited)"; then
        if ufw status | grep -q "Status: active"; then
            if ! ufw status | grep -q "$1"; then
                sudo ufw allow "$1/${type}"
                checkUFWAllowPort "$1"
            fi
        fi

    elif systemctl status firewalld 2>/dev/null | grep -q "active (running)"; then
        local updateFirewalldStatus=
        if ! firewall-cmd --list-ports --permanent | grep -qw "$1/${type}"; then
            updateFirewalldStatus=true
            firewall-cmd --zone=public --add-port="$1/${type}" --permanent
            checkFirewalldAllowPort "$1"
        fi

        if echo "${updateFirewalldStatus}" | grep -q "true"; then
            firewall-cmd --reload
        fi
    fi
}

# 检查80、443端口占用情况
checkPortUsedStatus() {
    if lsof -i tcp:80 | grep -q LISTEN; then
        echoContent red "\n ---> 80端口被占用，请手动关闭后安装\n"
        lsof -i tcp:80 | grep LISTEN
        exit 0
    fi

    if lsof -i tcp:443 | grep -q LISTEN; then
        echoContent red "\n ---> 443端口被占用，请手动关闭后安装\n"
        lsof -i tcp:80 | grep LISTEN
        exit 0
    fi
}

# 输出ufw端口开放状态
checkUFWAllowPort() {
    if ufw status | grep -q "$1"; then
        echoContent green " ---> $1端口开放成功"
    else
        echoContent red " ---> $1端口开放失败"
        exit 0
    fi
}

# 输出firewall-cmd端口开放状态
checkFirewalldAllowPort() {
    if firewall-cmd --list-ports --permanent | grep -q "$1"; then
        echoContent green " ---> $1端口开放成功"
    else
        echoContent red " ---> $1端口开放失败"
        exit 0
    fi
}

# 读取hysteria网络环境
readHysteriaConfig() {
    if [[ -n "${hysteriaConfigPath}" ]]; then
        hysteriaLag=$(jq -r .hysteriaLag <"${hysteriaConfigPath}client_network.json")
        hysteriaClientDownloadSpeed=$(jq -r .hysteriaClientDownloadSpeed <"${hysteriaConfigPath}client_network.json")
        hysteriaClientUploadSpeed=$(jq -r .hysteriaClientUploadSpeed <"${hysteriaConfigPath}client_network.json")
        hysteriaPort=$(jq -r .listen <"${hysteriaConfigPath}config.json" | awk -F "[:]" '{print $2}')
        hysteriaProtocol=$(jq -r .protocol <"${hysteriaConfigPath}config.json")
    fi
}
# 检查文件目录以及path路径
readConfigHostPathUUID() {
    currentPath=
    currentDefaultPort=
    currentUUID=
    currentHost=
    currentPort=
    currentAdd=
    # 读取path
    if [[ -n "${configPath}" ]]; then
        local fallback
        fallback=$(jq -r -c '.inbounds[0].settings.fallbacks[]|select(.path)' ${configPath}${frontingType}.json | head -1)

        local path
        path=$(echo "${fallback}" | jq -r .path | awk -F "[/]" '{print $2}')

        if [[ $(echo "${fallback}" | jq -r .dest) == 31297 ]]; then
            currentPath=$(echo "${path}" | awk -F "[w][s]" '{print $1}')
        elif [[ $(echo "${fallback}" | jq -r .dest) == 31298 ]]; then
            currentPath=$(echo "${path}" | awk -F "[t][c][p]" '{print $1}')
        elif [[ $(echo "${fallback}" | jq -r .dest) == 31299 ]]; then
            currentPath=$(echo "${path}" | awk -F "[v][w][s]" '{print $1}')
        fi
        # 尝试读取alpn h2 Path

        if [[ -z "${currentPath}" ]]; then
            dest=$(jq -r -c '.inbounds[0].settings.fallbacks[]|select(.alpn)|.dest' ${configPath}${frontingType}.json | head -1)
            if [[ "${dest}" == "31302" || "${dest}" == "31304" ]]; then

                if grep -q "trojangrpc {" <${nginxConfigPath}alone.conf; then
                    currentPath=$(grep "trojangrpc {" <${nginxConfigPath}alone.conf | awk -F "[/]" '{print $2}' | awk -F "[t][r][o][j][a][n]" '{print $1}')
                elif grep -q "grpc {" <${nginxConfigPath}alone.conf; then
                    currentPath=$(grep "grpc {" <${nginxConfigPath}alone.conf | head -1 | awk -F "[/]" '{print $2}' | awk -F "[g][r][p][c]" '{print $1}')
                fi
            fi
        fi

        local defaultPortFile=
        defaultPortFile=$(find ${configPath}* | grep "default")

        if [[ -n "${defaultPortFile}" ]]; then
            currentDefaultPort=$(echo "${defaultPortFile}" | awk -F [_] '{print $4}')
        else
            currentDefaultPort=$(jq -r .inbounds[0].port ${configPath}${frontingType}.json)
        fi

    fi
    if [[ "${coreInstallType}" == "1" ]]; then
        currentHost=$(jq -r .inbounds[0].streamSettings.tlsSettings.certificates[0].certificateFile ${configPath}${frontingType}.json | awk -F '[t][l][s][/]' '{print $2}' | awk -F '[.][c][r][t]' '{print $1}')
        currentUUID=$(jq -r .inbounds[0].settings.clients[0].id ${configPath}${frontingType}.json)
        currentAdd=$(jq -r .inbounds[0].settings.clients[0].add ${configPath}${frontingType}.json)
        if [[ "${currentAdd}" == "null" ]]; then
            currentAdd=${currentHost}
        fi
        currentPort=$(jq .inbounds[0].port ${configPath}${frontingType}.json)

    elif [[ "${coreInstallType}" == "2" ]]; then
        currentHost=$(jq -r .inbounds[0].streamSettings.tlsSettings.certificates[0].certificateFile ${configPath}${frontingType}.json | awk -F '[t][l][s][/]' '{print $2}' | awk -F '[.][c][r][t]' '{print $1}')
        currentAdd=$(jq -r .inbounds[0].settings.clients[0].add ${configPath}${frontingType}.json)

        if [[ "${currentAdd}" == "null" ]]; then
            currentAdd=${currentHost}
        fi
        currentUUID=$(jq -r .inbounds[0].settings.clients[0].id ${configPath}${frontingType}.json)
        currentPort=$(jq .inbounds[0].port ${configPath}${frontingType}.json)
    fi
}

# 状态展示
showInstallStatus() {
    if [[ -n "${coreInstallType}" ]]; then
        if [[ "${coreInstallType}" == 1 ]]; then
            if [[ -n $(pgrep -f xray/xray) ]]; then
                echoContent yellow "\n核心: Xray-core[运行中]"
            else
                echoContent yellow "\n核心: Xray-core[未运行]"
            fi

        elif [[ "${coreInstallType}" == 2 || "${coreInstallType}" == 3 ]]; then
            if [[ -n $(pgrep -f v2ray/v2ray) ]]; then
                echoContent yellow "\n核心: v2ray-core[运行中]"
            else
                echoContent yellow "\n核心: v2ray-core[未运行]"
            fi
        fi
        # 读取协议类型
        readInstallProtocolType

        if [[ -n ${currentInstallProtocolType} ]]; then
            echoContent yellow "已安装协议: \c"
        fi
        if echo ${currentInstallProtocolType} | grep -q 0; then
            if [[ "${coreInstallType}" == 2 ]]; then
                echoContent yellow "VLESS+TCP[TLS] \c"
            else
                echoContent yellow "VLESS+TCP[TLS/XTLS] \c"
            fi
        fi

        if echo ${currentInstallProtocolType} | grep -q trojan; then
            if [[ "${coreInstallType}" == 1 ]]; then
                echoContent yellow "Trojan+TCP[TLS/XTLS] \c"
            fi
        fi

        if echo ${currentInstallProtocolType} | grep -q 1; then
            echoContent yellow "VLESS+WS[TLS] \c"
        fi

        if echo ${currentInstallProtocolType} | grep -q 2; then
            echoContent yellow "Trojan+gRPC[TLS] \c"
        fi

        if echo ${currentInstallProtocolType} | grep -q 3; then
            echoContent yellow "VMess+WS[TLS] \c"
        fi

        if echo ${currentInstallProtocolType} | grep -q 4; then
            echoContent yellow "Trojan+TCP[TLS] \c"
        fi

        if echo ${currentInstallProtocolType} | grep -q 5; then
            echoContent yellow "VLESS+gRPC[TLS] \c"
        fi
    fi
}

# 清理旧残留
cleanUp() {
    if [[ "$1" == "v2rayClean" ]]; then
        rm -rf "$(find /etc/v2ray-agent/v2ray/* | grep -E '(config_full.json|conf)')"
        handleV2Ray stop >/dev/null
        rm -f /etc/systemd/system/v2ray.service
    elif [[ "$1" == "xrayClean" ]]; then
        rm -rf "$(find /etc/v2ray-agent/xray/* | grep -E '(config_full.json|conf)')"
        handleXray stop >/dev/null
        rm -f /etc/systemd/system/xray.service

    elif [[ "$1" == "v2rayDel" ]]; then
        rm -rf /etc/v2ray-agent/v2ray/*

    elif [[ "$1" == "xrayDel" ]]; then
        rm -rf /etc/v2ray-agent/xray/*
    fi
}

initVar "$1"
checkSystem
checkCPUVendor
readInstallType
readInstallProtocolType
readConfigHostPathUUID
readInstallAlpn
readCustomPort
checkBTPanel
# -------------------------------------------------------------

# 初始化安装目录
mkdirTools() {
    mkdir -p /etc/v2ray-agent/tls
    mkdir -p /etc/v2ray-agent/subscribe
    mkdir -p /etc/v2ray-agent/subscribe_tmp
    mkdir -p /etc/v2ray-agent/v2ray/conf
    mkdir -p /etc/v2ray-agent/v2ray/tmp
    mkdir -p /etc/v2ray-agent/xray/conf
    mkdir -p /etc/v2ray-agent/xray/tmp
    mkdir -p /etc/v2ray-agent/trojan
    mkdir -p /etc/v2ray-agent/hysteria/conf
    mkdir -p /etc/systemd/system/
    mkdir -p /tmp/v2ray-agent-tls/
}

# 安装工具包
installTools() {
    echoContent skyBlue "\n进度  $1/${totalProgress} : 安装工具"
    # 修复ubuntu个别系统问题
    if [[ "${release}" == "ubuntu" ]]; then
        dpkg --configure -a
    fi

    if [[ -n $(pgrep -f "apt") ]]; then
        pgrep -f apt | xargs kill -9
    fi

    echoContent green " ---> 检查、安装更新【新机器会很慢，如长时间无反应，请手动停止后重新执行】"

    ${upgrade} >/etc/v2ray-agent/install.log 2>&1
    if grep <"/etc/v2ray-agent/install.log" -q "changed"; then
        ${updateReleaseInfoChange} >/dev/null 2>&1
    fi

    if [[ "${release}" == "centos" ]]; then
        rm -rf /var/run/yum.pid
        ${installType} epel-release >/dev/null 2>&1
    fi

    #	[[ -z `find /usr/bin /usr/sbin |grep -v grep|grep -w curl` ]]

    if ! find /usr/bin /usr/sbin | grep -q -w wget; then
        echoContent green " ---> 安装wget"
        ${installType} wget >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w curl; then
        echoContent green " ---> 安装curl"
        ${installType} curl >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w unzip; then
        echoContent green " ---> 安装unzip"
        ${installType} unzip >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w socat; then
        echoContent green " ---> 安装socat"
        ${installType} socat >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w tar; then
        echoContent green " ---> 安装tar"
        ${installType} tar >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w cron; then
        echoContent green " ---> 安装crontabs"
        if [[ "${release}" == "ubuntu" ]] || [[ "${release}" == "debian" ]]; then
            ${installType} cron >/dev/null 2>&1
        else
            ${installType} crontabs >/dev/null 2>&1
        fi
    fi
    if ! find /usr/bin /usr/sbin | grep -q -w jq; then
        echoContent green " ---> 安装jq"
        ${installType} jq >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w binutils; then
        echoContent green " ---> 安装binutils"
        ${installType} binutils >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w ping6; then
        echoContent green " ---> 安装ping6"
        ${installType} inetutils-ping >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w qrencode; then
        echoContent green " ---> 安装qrencode"
        ${installType} qrencode >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w sudo; then
        echoContent green " ---> 安装sudo"
        ${installType} sudo >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w lsb-release; then
        echoContent green " ---> 安装lsb-release"
        ${installType} lsb-release >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w lsof; then
        echoContent green " ---> 安装lsof"
        ${installType} lsof >/dev/null 2>&1
    fi

    if ! find /usr/bin /usr/sbin | grep -q -w dig; then
        echoContent green " ---> 安装dig"
        if echo "${installType}" | grep -q -w "apt"; then
            ${installType} dnsutils >/dev/null 2>&1
        elif echo "${installType}" | grep -q -w "yum"; then
            ${installType} bind-utils >/dev/null 2>&1
        fi
    fi

    # 检测nginx版本，并提供是否卸载的选项

    if ! find /usr/bin /usr/sbin | grep -q -w nginx; then
        echoContent green " ---> 安装nginx"
        installNginxTools
    else
        nginxVersion=$(nginx -v 2>&1)
        nginxVersion=$(echo "${nginxVersion}" | awk -F "[n][g][i][n][x][/]" '{print $2}' | awk -F "[.]" '{print $2}')
        if [[ ${nginxVersion} -lt 14 ]]; then
            read -r -p "读取到当前的Nginx版本不支持gRPC，会导致安装失败，是否卸载Nginx后重新安装 ？[y/n]:" unInstallNginxStatus
            if [[ "${unInstallNginxStatus}" == "y" ]]; then
                ${removeType} nginx >/dev/null 2>&1
                echoContent yellow " ---> nginx卸载完成"
                echoContent green " ---> 安装nginx"
                installNginxTools >/dev/null 2>&1
            else
                exit 0
            fi
        fi
    fi
    if ! find /usr/bin /usr/sbin | grep -q -w semanage; then
        echoContent green " ---> 安装semanage"
        ${installType} bash-completion >/dev/null 2>&1

        if [[ "${centosVersion}" == "7" ]]; then
            policyCoreUtils="policycoreutils-python.x86_64"
        elif [[ "${centosVersion}" == "8" ]]; then
            policyCoreUtils="policycoreutils-python-utils-2.9-9.el8.noarch"
        fi

        if [[ -n "${policyCoreUtils}" ]]; then
            ${installType} ${policyCoreUtils} >/dev/null 2>&1
        fi
        if [[ -n $(which semanage) ]]; then
            semanage port -a -t http_port_t -p tcp 31300

        fi
    fi

    if [[ ! -d "$HOME/.acme.sh" ]] || [[ -d "$HOME/.acme.sh" && -z $(find "$HOME/.acme.sh/acme.sh") ]]; then
        echoContent green " ---> 安装acme.sh"
        curl -s https://get.acme.sh | sh >/etc/v2ray-agent/tls/acme.log 2>&1

        if [[ ! -d "$HOME/.acme.sh" ]] || [[ -z $(find "$HOME/.acme.sh/acme.sh") ]]; then
            echoContent red "  acme安装失败--->"
            tail -n 100 /etc/v2ray-agent/tls/acme.log
            echoContent yellow "错误排查:"
            echoContent red "  1.获取Github文件失败，请等待Github恢复后尝试，恢复进度可查看 [https://www.githubstatus.com/]"
            echoContent red "  2.acme.sh脚本出现bug，可查看[https://github.com/acmesh-official/acme.sh] issues"
            echoContent red "  3.如纯IPv6机器，请设置NAT64,可执行下方命令"
            echoContent skyBlue "  echo -e \"nameserver 2001:67c:2b0::4\\\nnameserver 2001:67c:2b0::6\" >> /etc/resolv.conf"
            exit 0
        fi
    fi
}

# 安装Nginx
installNginxTools() {

    if [[ "${release}" == "debian" ]]; then
        sudo apt install gnupg2 ca-certificates lsb-release -y >/dev/null 2>&1
        echo "deb http://nginx.org/packages/mainline/debian $(lsb_release -cs) nginx" | sudo tee /etc/apt/sources.list.d/nginx.list >/dev/null 2>&1
        echo -e "Package: *\nPin: origin nginx.org\nPin: release o=nginx\nPin-Priority: 900\n" | sudo tee /etc/apt/preferences.d/99nginx >/dev/null 2>&1
        curl -o /tmp/nginx_signing.key https://nginx.org/keys/nginx_signing.key >/dev/null 2>&1
        # gpg --dry-run --quiet --import --import-options import-show /tmp/nginx_signing.key
        sudo mv /tmp/nginx_signing.key /etc/apt/trusted.gpg.d/nginx_signing.asc
        sudo apt update >/dev/null 2>&1

    elif [[ "${release}" == "ubuntu" ]]; then
        sudo apt install gnupg2 ca-certificates lsb-release -y >/dev/null 2>&1
        echo "deb http://nginx.org/packages/mainline/ubuntu $(lsb_release -cs) nginx" | sudo tee /etc/apt/sources.list.d/nginx.list >/dev/null 2>&1
        echo -e "Package: *\nPin: origin nginx.org\nPin: release o=nginx\nPin-Priority: 900\n" | sudo tee /etc/apt/preferences.d/99nginx >/dev/null 2>&1
        curl -o /tmp/nginx_signing.key https://nginx.org/keys/nginx_signing.key >/dev/null 2>&1
        # gpg --dry-run --quiet --import --import-options import-show /tmp/nginx_signing.key
        sudo mv /tmp/nginx_signing.key /etc/apt/trusted.gpg.d/nginx_signing.asc
        sudo apt update >/dev/null 2>&1

    elif [[ "${release}" == "centos" ]]; then
        ${installType} yum-utils >/dev/null 2>&1
        cat <<EOF >/etc/yum.repos.d/nginx.repo
[nginx-stable]
name=nginx stable repo
baseurl=http://nginx.org/packages/centos/\$releasever/\$basearch/
gpgcheck=1
enabled=1
gpgkey=https://nginx.org/keys/nginx_signing.key
module_hotfixes=true

[nginx-mainline]
name=nginx mainline repo
baseurl=http://nginx.org/packages/mainline/centos/\$releasever/\$basearch/
gpgcheck=1
enabled=0
gpgkey=https://nginx.org/keys/nginx_signing.key
module_hotfixes=true
EOF
        sudo yum-config-manager --enable nginx-mainline >/dev/null 2>&1
    fi
    ${installType} nginx >/dev/null 2>&1
    systemctl daemon-reload
    systemctl enable nginx
}

# 安装warp
installWarp() {
    ${installType} gnupg2 -y >/dev/null 2>&1
    if [[ "${release}" == "debian" ]]; then
        curl -s https://pkg.cloudflareclient.com/pubkey.gpg | sudo apt-key add - >/dev/null 2>&1
        echo "deb http://pkg.cloudflareclient.com/ $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/cloudflare-client.list >/dev/null 2>&1
        sudo apt update >/dev/null 2>&1

    elif [[ "${release}" == "ubuntu" ]]; then
        curl -s https://pkg.cloudflareclient.com/pubkey.gpg | sudo apt-key add - >/dev/null 2>&1
        echo "deb http://pkg.cloudflareclient.com/ focal main" | sudo tee /etc/apt/sources.list.d/cloudflare-client.list >/dev/null 2>&1
        sudo apt update >/dev/null 2>&1

    elif [[ "${release}" == "centos" ]]; then
        ${installType} yum-utils >/dev/null 2>&1
        sudo rpm -ivh "http://pkg.cloudflareclient.com/cloudflare-release-el${centosVersion}.rpm" >/dev/null 2>&1
    fi

    echoContent green " ---> 安装WARP"
    ${installType} cloudflare-warp >/dev/null 2>&1
    if [[ -z $(which warp-cli) ]]; then
        echoContent red " ---> 安装WARP失败"
        exit 0
    fi
    systemctl enable warp-svc
    warp-cli --accept-tos register
    warp-cli --accept-tos set-mode proxy
    warp-cli --accept-tos set-proxy-port 31303
    warp-cli --accept-tos connect
    warp-cli --accept-tos enable-always-on

    #	if [[]];then
    #	fi
    # todo curl --socks5 127.0.0.1:31303 https://www.cloudflare.com/cdn-cgi/trace
    # systemctl daemon-reload
    # systemctl enable cloudflare-warp
}
# 初始化Nginx申请证书配置
initTLSNginxConfig() {
    handleNginx stop
    echoContent skyBlue "\n进度  $1/${totalProgress} : 初始化Nginx申请证书配置"
    if [[ -n "${currentHost}" ]]; then
        echo
        read -r -p "读取到上次安装记录，是否使用上次安装时的域名 ？[y/n]:" historyDomainStatus
        if [[ "${historyDomainStatus}" == "y" ]]; then
            domain=${currentHost}
            echoContent yellow "\n ---> 域名: ${domain}"
        else
            echo
            echoContent yellow "请输入要配置的域名 例: www.v2ray-agent.com --->"
            read -r -p "域名:" domain
        fi
    else
        echo
        echoContent yellow "请输入要配置的域名 例: www.v2ray-agent.com --->"
        read -r -p "域名:" domain
    fi

    if [[ -z ${domain} ]]; then
        echoContent red "  域名不可为空--->"
        initTLSNginxConfig 3
    else
        dnsTLSDomain=$(echo "${domain}" | awk -F "[.]" '{print $(NF-1)"."$NF}')
        customPortFunction
        local port=80
        if [[ -n "${customPort}" ]]; then
            port=${customPort}
        fi

        # 修改配置
        touch ${nginxConfigPath}alone.conf
        cat <<EOF >${nginxConfigPath}alone.conf
server {
    listen ${port};
    listen [::]:${port};
    server_name ${domain};
    root /usr/share/nginx/html;
    location ~ /.well-known {
    	allow all;
    }
    location /test {
    	return 200 'fjkvymb6len';
    }
	location /ip {
		proxy_set_header Host \$host;
        proxy_set_header X-Real-IP \$remote_addr;
        proxy_set_header REMOTE-HOST \$remote_addr;
        proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for;
		default_type text/plain;
		return 200 \$proxy_add_x_forwarded_for;
	}
}
EOF
    fi

    readAcmeTLS
}

# 修改nginx重定向配置
updateRedirectNginxConf() {

    #	if [[ ${BTPanelStatus} == "true" ]]; then
    #
    #		cat <<EOF >${nginxConfigPath}alone.conf
    #        server {
    #        		listen 127.0.0.1:31300;
    #        		server_name _;
    #        		return 403;
    #        }
    #EOF
    #
    #	elif [[ -n "${customPort}" ]]; then
    #		cat <<EOF >${nginxConfigPath}alone.conf
    #                server {
    #                		listen 127.0.0.1:31300;
    #                		server_name _;
    #                		return 403;
    #                }
    #EOF
    #	fi
    local redirectDomain=${domain}
    if [[ -n "${customPort}" ]]; then
        redirectDomain=${domain}:${customPort}
    fi
    cat <<EOF >${nginxConfigPath}alone.conf
server {
	listen 80;
	server_name ${domain};
	return 302 https://${redirectDomain};
}
server {
		listen 127.0.0.1:31300;
		server_name _;
		return 403;
}
EOF

    if echo "${selectCustomInstallType}" | grep -q 2 && echo "${selectCustomInstallType}" | grep -q 5 || [[ -z "${selectCustomInstallType}" ]]; then

        cat <<EOF >>${nginxConfigPath}alone.conf
server {
	listen 127.0.0.1:31302 http2 so_keepalive=on;
	server_name ${domain};
	root /usr/share/nginx/html;

	client_header_timeout 1071906480m;
    keepalive_timeout 1071906480m;

	location /s/ {
    	add_header Content-Type text/plain;
    	alias /etc/v2ray-agent/subscribe/;
    }

    location /${currentPath}grpc {
    	if (\$content_type !~ "application/grpc") {
    		return 404;
    	}
 		client_max_body_size 0;
		grpc_set_header X-Real-IP \$proxy_add_x_forwarded_for;
		client_body_timeout 1071906480m;
		grpc_read_timeout 1071906480m;
		grpc_pass grpc://127.0.0.1:31301;
	}

	location /${currentPath}trojangrpc {
		if (\$content_type !~ "application/grpc") {
            		return 404;
		}
 		client_max_body_size 0;
		grpc_set_header X-Real-IP \$proxy_add_x_forwarded_for;
		client_body_timeout 1071906480m;
		grpc_read_timeout 1071906480m;
		grpc_pass grpc://127.0.0.1:31304;
	}
	location / {
        	add_header Strict-Transport-Security "max-age=15552000; preload" always;
    }
}
EOF
    elif echo "${selectCustomInstallType}" | grep -q 5 || [[ -z "${selectCustomInstallType}" ]]; then
        cat <<EOF >>${nginxConfigPath}alone.conf
server {
	listen 127.0.0.1:31302 http2;
	server_name ${domain};
	root /usr/share/nginx/html;
	location /s/ {
    		add_header Content-Type text/plain;
    		alias /etc/v2ray-agent/subscribe/;
    }
	location /${currentPath}grpc {
		client_max_body_size 0;
#		keepalive_time 1071906480m;
		keepalive_requests 4294967296;
		client_body_timeout 1071906480m;
 		send_timeout 1071906480m;
 		lingering_close always;
 		grpc_read_timeout 1071906480m;
 		grpc_send_timeout 1071906480m;
		grpc_pass grpc://127.0.0.1:31301;
	}
}
EOF

    elif echo "${selectCustomInstallType}" | grep -q 2 || [[ -z "${selectCustomInstallType}" ]]; then

        cat <<EOF >>${nginxConfigPath}alone.conf
server {
	listen 127.0.0.1:31302 http2;
	server_name ${domain};
	root /usr/share/nginx/html;
	location /s/ {
    		add_header Content-Type text/plain;
    		alias /etc/v2ray-agent/subscribe/;
    }
	location /${currentPath}trojangrpc {
		client_max_body_size 0;
		# keepalive_time 1071906480m;
		keepalive_requests 4294967296;
		client_body_timeout 1071906480m;
 		send_timeout 1071906480m;
 		lingering_close always;
 		grpc_read_timeout 1071906480m;
 		grpc_send_timeout 1071906480m;
		grpc_pass grpc://127.0.0.1:31301;
	}
}
EOF
    else

        cat <<EOF >>${nginxConfigPath}alone.conf
server {
	listen 127.0.0.1:31302 http2;
	server_name ${domain};
	root /usr/share/nginx/html;
	location /s/ {
    		add_header Content-Type text/plain;
    		alias /etc/v2ray-agent/subscribe/;
    }
	location / {
	}
}
EOF
    fi

    cat <<EOF >>${nginxConfigPath}alone.conf
server {
	listen 127.0.0.1:31300;
	server_name ${domain};
	root /usr/share/nginx/html;
	location /s/ {
		add_header Content-Type text/plain;
		alias /etc/v2ray-agent/subscribe/;
	}
	location / {
		add_header Strict-Transport-Security "max-age=15552000; preload" always;
	}
}
EOF

}

# 检查ip
checkIP() {
    echoContent skyBlue "\n ---> 检查域名ip中"
    local checkDomain=${domain}
    if [[ -n "${customPort}" ]]; then
        checkDomain="http://${domain}:${customPort}"
    fi
    localIP=$(curl -s -m 2 "${checkDomain}/ip")

    handleNginx stop
    if [[ -z ${localIP} ]] || ! echo "${localIP}" | sed '1{s/[^(]*(//;s/).*//;q}' | grep -q '\.' && ! echo "${localIP}" | sed '1{s/[^(]*(//;s/).*//;q}' | grep -q ':'; then
        echoContent red "\n ---> 未检测到当前域名的ip"
        echoContent skyBlue " ---> 请依次进行下列检查"
        echoContent yellow " --->  1.检查域名是否书写正确"
        echoContent yellow " --->  2.检查域名dns解析是否正确"
        echoContent yellow " --->  3.如解析正确，请等待dns生效，预计三分钟内生效"
        echoContent yellow " --->  4.如报Nginx启动问题，请手动启动nginx查看错误，如自己无法处理请提issues"
        echoContent yellow " --->  5.错误日志:${localIP}"
        echo
        echoContent skyBlue " ---> 如以上设置都正确，请重新安装纯净系统后再次尝试"

        if [[ -n ${localIP} ]]; then
            echoContent yellow " ---> 检测返回值异常，建议手动卸载nginx后重新执行脚本"
        fi
        local portFirewallPortStatus="443、80"

        if [[ -n "${customPort}" ]]; then
            portFirewallPortStatus="${customPort}"
        fi
        echoContent red " ---> 请检查防火墙规则是否开放${portFirewallPortStatus}\n"
        read -r -p "是否通过脚本修改防火墙规则开放${portFirewallPortStatus}端口？[y/n]:" allPortFirewallStatus

        if [[ ${allPortFirewallStatus} == "y" ]]; then
            if [[ -n "${customPort}" ]]; then
                allowPort "${customPort}"
            else
                allowPort 80
                allowPort 443
            fi

            handleNginx start
            checkIP
        else
            exit 0
        fi
    else
        if echo "${localIP}" | awk -F "[,]" '{print $2}' | grep -q "." || echo "${localIP}" | awk -F "[,]" '{print $2}' | grep -q ":"; then
            echoContent red "\n ---> 检测到多个ip，请确认是否关闭cloudflare的云朵"
            echoContent yellow " ---> 关闭云朵后等待三分钟后重试"
            echoContent yellow " ---> 检测到的ip如下:[${localIP}]"
            exit 0
        fi
        echoContent green " ---> 当前域名ip为:[${localIP}]"
    fi

}
# 自定义email
customSSLEmail() {
    if echo "$1" | grep -q "validate email"; then
        read -r -p "是否重新输入邮箱地址[y/n]:" sslEmailStatus
        if [[ "${sslEmailStatus}" == "y" ]]; then
            sed '/ACCOUNT_EMAIL/d' /root/.acme.sh/account.conf >/root/.acme.sh/account.conf_tmp && mv /root/.acme.sh/account.conf_tmp /root/.acme.sh/account.conf
        else
            exit 0
        fi
    fi

    if [[ -d "/root/.acme.sh" && -f "/root/.acme.sh/account.conf" ]]; then
        if ! grep -q "ACCOUNT_EMAIL" <"/root/.acme.sh/account.conf" && ! echo "${sslType}" | grep -q "letsencrypt"; then
            read -r -p "请输入邮箱地址:" sslEmail
            if echo "${sslEmail}" | grep -q "@"; then
                echo "ACCOUNT_EMAIL='${sslEmail}'" >>/root/.acme.sh/account.conf
                echoContent green " ---> 添加成功"
            else
                echoContent yellow "请重新输入正确的邮箱格式[例: username@example.com]"
                customSSLEmail
            fi
        fi
    fi

}
# 选择ssl安装类型
switchSSLType() {
    if [[ -z "${sslType}" ]]; then
        echoContent red "\n=============================================================="
        echoContent yellow "1.letsencrypt[默认]"
        echoContent yellow "2.zerossl"
        echoContent yellow "3.buypass[不支持DNS申请]"
        echoContent red "=============================================================="
        read -r -p "请选择[回车]使用默认:" selectSSLType
        case ${selectSSLType} in
        1)
            sslType="letsencrypt"
            ;;
        2)
            sslType="zerossl"
            ;;
        3)
            sslType="buypass"
            ;;
        *)
            sslType="letsencrypt"
            ;;
        esac
        echo "${sslType}" >/etc/v2ray-agent/tls/ssl_type

    fi
}

# 选择acme安装证书方式
selectAcmeInstallSSL() {
    local installSSLIPv6=
    if echo "${localIP}" | grep -q ":"; then
        installSSLIPv6="--listen-v6"
    fi
    echo
    if [[ -n "${customPort}" ]]; then
        if [[ "${selectSSLType}" == "3" ]]; then
            echoContent red " ---> buypass不支持免费通配符证书"
            echo
            exit
        fi
        dnsSSLStatus=true
    else
        if [[ -z "${dnsSSLStatus}" ]]; then
            read -r -p "是否使用DNS申请证书，如不会使用DNS申请证书请输入n[y/n]:" installSSLDNStatus

            if [[ ${installSSLDNStatus} == 'y' ]]; then
                dnsSSLStatus=true
            else
                dnsSSLStatus=false
            fi
        fi

    fi
    acmeInstallSSL

    readAcmeTLS
}

# 安装SSL证书
acmeInstallSSL() {
    if [[ "${dnsSSLStatus}" == "true" ]]; then

        sudo "$HOME/.acme.sh/acme.sh" --issue -d "*.${dnsTLSDomain}" -d "${dnsTLSDomain}" --dns --yes-I-know-dns-manual-mode-enough-go-ahead-please -k ec-256 --server "${sslType}" ${installSSLIPv6} 2>&1 | tee -a /etc/v2ray-agent/tls/acme.log >/dev/null

        local txtValue=
        txtValue=$(tail -n 10 /etc/v2ray-agent/tls/acme.log | grep "TXT value" | awk -F "'" '{print $2}')
        if [[ -n "${txtValue}" ]]; then
            echoContent green " ---> 请手动添加DNS TXT记录"
            echoContent yellow " ---> 添加方法请参考此教程，https://github.com/mack-a/v2ray-agent/blob/master/documents/dns_txt.md"
            echoContent yellow " ---> 如同一个域名多台机器安装通配符证书，请添加多个TXT记录，不需要修改以前添加的TXT记录"
            echoContent green " --->  name：_acme-challenge"
            echoContent green " --->  value：${txtValue}"
            echoContent yellow " ---> 添加完成后等请等待1-2分钟"
            echo
            read -r -p "是否添加完成[y/n]:" addDNSTXTRecordStatus
            if [[ "${addDNSTXTRecordStatus}" == "y" ]]; then
                local txtAnswer=
                txtAnswer=$(dig @1.1.1.1 +nocmd "_acme-challenge.${dnsTLSDomain}" txt +noall +answer | awk -F "[\"]" '{print $2}')
                if echo "${txtAnswer}" | grep -q "^${txtValue}"; then
                    echoContent green " ---> TXT记录验证通过"
                    echoContent green " ---> 生成证书中"
                    if [[ -n "${installSSLIPv6}" ]]; then
                        sudo "$HOME/.acme.sh/acme.sh" --renew -d "*.${dnsTLSDomain}" -d "${dnsTLSDomain}" --yes-I-know-dns-manual-mode-enough-go-ahead-please --ecc --server "${sslType}" ${installSSLIPv6} 2>&1 | tee -a /etc/v2ray-agent/tls/acme.log >/dev/null
                    else
                        sudo "$HOME/.acme.sh/acme.sh" --renew -d "*.${dnsTLSDomain}" -d "${dnsTLSDomain}" --yes-I-know-dns-manual-mode-enough-go-ahead-please --ecc --server "${sslType}" 2>&1 | tee -a /etc/v2ray-agent/tls/acme.log >/dev/null
                    fi
                else
                    echoContent red " ---> 验证失败，请等待1-2分钟后重新尝试"
                    acmeInstallSSL
                fi
            else
                echoContent red " ---> 放弃"
                exit 0
            fi
        fi
    else
        echoContent green " ---> 生成证书中"
        sudo "$HOME/.acme.sh/acme.sh" --issue -d "${tlsDomain}" --standalone -k ec-256 --server "${sslType}" ${installSSLIPv6} 2>&1 | tee -a /etc/v2ray-agent/tls/acme.log >/dev/null
    fi
}
# 自定义端口
customPortFunction() {
    local historyCustomPortStatus=
    local showPort=
    if [[ -n "${customPort}" || -n "${currentPort}" ]]; then
        echo
        read -r -p "读取到上次安装时的端口，是否使用上次安装时的端口？[y/n]:" historyCustomPortStatus
        if [[ "${historyCustomPortStatus}" == "y" ]]; then
            showPort="${currentPort}"
            if [[ -n "${customPort}" ]]; then
                showPort="${customPort}"
            fi
            echoContent yellow "\n ---> 端口: ${showPort}"
        fi
    fi

    if [[ -z "${currentPort}" && -z "${customPort}" ]] || [[ "${historyCustomPortStatus}" == "n" ]]; then
        echo
        echoContent yellow "请输入端口[默认: 443]，如自定义端口，只允许使用DNS申请证书[回车使用默认]"
        read -r -p "端口:" customPort
        if [[ -n "${customPort}" && "${customPort}" != "443" ]]; then
            if ((customPort >= 1 && customPort <= 65535)); then
                checkCustomPort
                allowPort "${customPort}"
            else
                echoContent red " ---> 端口输入错误"
                exit
            fi
        else
            customPort=
            echoContent yellow "\n ---> 端口: 443"
        fi
    fi
}

# 检测端口是否占用
checkCustomPort() {
    if lsof -i "tcp:${customPort}" | grep -q LISTEN; then
        echoContent red "\n ---> ${customPort}端口被占用，请手动关闭后安装\n"
        lsof -i tcp:80 | grep LISTEN
        exit 0
    fi
}

# 安装TLS
installTLS() {
    echoContent skyBlue "\n进度  $1/${totalProgress} : 申请TLS证书\n"
    local tlsDomain=${domain}

    # 安装tls
    if [[ -f "/etc/v2ray-agent/tls/${tlsDomain}.crt" && -f "/etc/v2ray-agent/tls/${tlsDomain}.key" && -n $(cat "/etc/v2ray-agent/tls/${tlsDomain}.crt") ]] || [[ -d "$HOME/.acme.sh/${tlsDomain}_ecc" && -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.key" && -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.cer" ]]; then
        echoContent green " ---> 检测到证书"
        # checkTLStatus
        renewalTLS

        if [[ -z $(find /etc/v2ray-agent/tls/ -name "${tlsDomain}.crt") ]] || [[ -z $(find /etc/v2ray-agent/tls/ -name "${tlsDomain}.key") ]] || [[ -z $(cat "/etc/v2ray-agent/tls/${tlsDomain}.crt") ]]; then
            sudo "$HOME/.acme.sh/acme.sh" --installcert -d "${tlsDomain}" --fullchainpath "/etc/v2ray-agent/tls/${tlsDomain}.crt" --keypath "/etc/v2ray-agent/tls/${tlsDomain}.key" --ecc >/dev/null
        else
            echoContent yellow " ---> 如未过期或者自定义证书请选择[n]\n"
            read -r -p "是否重新安装？[y/n]:" reInstallStatus
            if [[ "${reInstallStatus}" == "y" ]]; then
                rm -rf /etc/v2ray-agent/tls/*
                installTLS "$1"
            fi
        fi

    elif [[ -d "$HOME/.acme.sh" ]] && [[ ! -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.cer" || ! -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.key" ]]; then
        echoContent green " ---> 安装TLS证书"

        if [[ "${installDNSACMEStatus}" != "true" ]]; then
            switchSSLType
            customSSLEmail
            selectAcmeInstallSSL
        else
            echoContent green " ---> 检测到已安装通配符证书，自动生成中"
        fi
        if [[ "${installDNSACMEStatus}" == "true" ]]; then
            echo
            if [[ -d "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc" && -f "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc/*.${dnsTLSDomain}.key" && -f "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc/*.${dnsTLSDomain}.cer" ]]; then
                sudo "$HOME/.acme.sh/acme.sh" --installcert -d "*.${dnsTLSDomain}" --fullchainpath "/etc/v2ray-agent/tls/${tlsDomain}.crt" --keypath "/etc/v2ray-agent/tls/${tlsDomain}.key" --ecc >/dev/null
            fi

        elif [[ -d "$HOME/.acme.sh/${tlsDomain}_ecc" && -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.key" && -f "$HOME/.acme.sh/${tlsDomain}_ecc/${tlsDomain}.cer" ]]; then
            sudo "$HOME/.acme.sh/acme.sh" --installcert -d "${tlsDomain}" --fullchainpath "/etc/v2ray-agent/tls/${tlsDomain}.crt" --keypath "/etc/v2ray-agent/tls/${tlsDomain}.key" --ecc >/dev/null
        fi

        if [[ ! -f "/etc/v2ray-agent/tls/${tlsDomain}.crt" || ! -f "/etc/v2ray-agent/tls/${tlsDomain}.key" ]] || [[ -z $(cat "/etc/v2ray-agent/tls/${tlsDomain}.key") || -z $(cat "/etc/v2ray-agent/tls/${tlsDomain}.crt") ]]; then
            tail -n 10 /etc/v2ray-agent/tls/acme.log
            if [[ ${installTLSCount} == "1" ]]; then
                echoContent red " ---> TLS安装失败，请检查acme日志"
                exit 0
            fi

            installTLSCount=1
            echo
            if [[ -z "${customPort}" ]]; then
                echoContent red " ---> TLS安装失败，正在检查80、443端口是否开放"
                allowPort 80
                allowPort 443
            fi

            echoContent yellow " ---> 重新尝试安装TLS证书"

            if tail -n 10 /etc/v2ray-agent/tls/acme.log | grep -q "Could not validate email address as valid"; then
                echoContent red " ---> 邮箱无法通过SSL厂商验证，请重新输入"
                echo
                customSSLEmail "validate email"
                installTLS "$1"
            else
                installTLS "$1"
            fi

        fi

        echoContent green " ---> TLS生成成功"
    else
        echoContent yellow " ---> 未安装acme.sh"
        exit 0
    fi
}
# 配置伪装博客
initNginxConfig() {
    echoContent skyBlue "\n进度  $1/${totalProgress} : 配置Nginx"

    cat <<EOF >${nginxConfigPath}alone.conf
server {
    listen 80;
    listen [::]:80;
    server_name ${domain};
    root /usr/share/nginx/html;
    location ~ /.well-known {allow all;}
    location /test {return 200 'fjkvymb6len';}
}
EOF
}

# 自定义/随机路径
randomPathFunction() {
    echoContent skyBlue "\n进度  $1/${totalProgress} : 生成随机路径"

    if [[ -n "${currentPath}" ]]; then
        echo
        read -r -p "读取到上次安装记录，是否使用上次安装时的path路径 ？[y/n]:" historyPathStatus
        echo
    fi

    if [[ "${historyPathStatus}" == "y" ]]; then
        customPath=${currentPath}
        echoContent green " ---> 使用成功\n"
    else
        echoContent yellow "请输入自定义路径[例: alone]，不需要斜杠，[回车]随机路径"
        read -r -p '路径:' customPath

        if [[ -z "${customPath}" ]]; then
            customPath=$(head -n 50 /dev/urandom | sed 's/[^a-z]//g' | strings -n 4 | tr '[:upper:]' '[:lower:]' | head -1)
            currentPath=${customPath:0:4}
            customPath=${currentPath}
        else
            currentPath=${customPath}
        fi

    fi
    echoContent yellow "\n path:${currentPath}"
    echoContent skyBlue "\n----------------------------"
}
# Nginx伪装博客
nginxBlog() {
    echoContent skyBlue "\n进度 $1/${totalProgress} : 添加伪装站点"
    if [[ -d "/usr/share/nginx/html" && -f "/usr/share/nginx/html/check" ]]; then
        echo
        read -r -p "检测到安装伪装站点，是否需要重新安装[y/n]:" nginxBlogInstallStatus
        if [[ "${nginxBlogInstallStatus}" == "y" ]]; then
            rm -rf /usr/share/nginx/html
            randomNum=$((RANDOM % 6 + 1))
            wget -q -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${randomNum}.zip >/dev/null
            unzip -o /usr/share/nginx/html${randomNum}.zip -d /usr/share/nginx/html >/dev/null
            rm -f /usr/share/nginx/html${randomNum}.zip*
            echoContent green " ---> 添加伪装站点成功"
        fi
    else
        randomNum=$((RANDOM % 6 + 1))
        rm -rf /usr/share/nginx/html
        wget -q -P /usr/share/nginx https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${randomNum}.zip >/dev/null
        unzip -o /usr/share/nginx/html${randomNum}.zip -d /usr/share/nginx/html >/dev/null
        rm -f /usr/share/nginx/html${randomNum}.zip*
        echoContent green " ---> 添加伪装站点成功"
    fi

}

# 修改http_port_t端口
updateSELinuxHTTPPortT() {

    $(find /usr/bin /usr/sbin | grep -w journalctl) -xe >/etc/v2ray-agent/nginx_error.log 2>&1

    if find /usr/bin /usr/sbin | grep -q -w semanage && find /usr/bin /usr/sbin | grep -q -w getenforce && grep -E "31300|31302" </etc/v2ray-agent/nginx_error.log | grep -q "Permission denied"; then
        echoContent red " ---> 检查SELinux端口是否开放"
        if ! $(find /usr/bin /usr/sbin | grep -w semanage) port -l | grep http_port | grep -q 31300; then
            $(find /usr/bin /usr/sbin | grep -w semanage) port -a -t http_port_t -p tcp 31300
            echoContent green " ---> http_port_t 31300 端口开放成功"
        fi

        if ! $(find /usr/bin /usr/sbin | grep -w semanage) port -l | grep http_port | grep -q 31302; then
            $(find /usr/bin /usr/sbin | grep -w semanage) port -a -t http_port_t -p tcp 31302
            echoContent green " ---> http_port_t 31302 端口开放成功"
        fi
        handleNginx start

    else
        exit 0
    fi
}

# 操作Nginx
handleNginx() {

    if [[ -z $(pgrep -f "nginx") ]] && [[ "$1" == "start" ]]; then
        systemctl start nginx 2>/etc/v2ray-agent/nginx_error.log

        sleep 0.5

        if [[ -z $(pgrep -f nginx) ]]; then
            echoContent red " ---> Nginx启动失败"
            echoContent red " ---> 请手动尝试安装nginx后，再次执行脚本"

            if grep -q "journalctl -xe" </etc/v2ray-agent/nginx_error.log; then
                updateSELinuxHTTPPortT
            fi

            # exit 0
        else
            echoContent green " ---> Nginx启动成功"
        fi

    elif [[ -n $(pgrep -f "nginx") ]] && [[ "$1" == "stop" ]]; then
        systemctl stop nginx
        sleep 0.5
        if [[ -n $(pgrep -f "nginx") ]]; then
            pgrep -f "nginx" | xargs kill -9
        fi
        echoContent green " ---> Nginx关闭成功"
    fi
}

# 定时任务更新tls证书
installCronTLS() {
    echoContent skyBlue "\n进度 $1/${totalProgress} : 添加定时维护证书"
    crontab -l >/etc/v2ray-agent/backup_crontab.cron
    local historyCrontab
    historyCrontab=$(sed '/v2ray-agent/d;/acme.sh/d' /etc/v2ray-agent/backup_crontab.cron)
    echo "${historyCrontab}" >/etc/v2ray-agent/backup_crontab.cron
    echo "30 1 * * * /bin/bash /etc/v2ray-agent/install.sh RenewTLS >> /etc/v2ray-agent/crontab_tls.log 2>&1" >>/etc/v2ray-agent/backup_crontab.cron
    crontab /etc/v2ray-agent/backup_crontab.cron
    echoContent green "\n ---> 添加定时维护证书成功"
}

# 更新证书
renewalTLS() {

    if [[ -n $1 ]]; then
        echoContent skyBlue "\n进度  $1/1 : 更新证书"
    fi
    readAcmeTLS
    local domain=${currentHost}
    if [[ -z "${currentHost}" && -n "${tlsDomain}" ]]; then
        domain=${tlsDomain}
    fi

    if [[ -f "/etc/v2ray-agent/tls/ssl_type" ]]; then
        if grep -q "buypass" <"/etc/v2ray-agent/tls/ssl_type"; then
            sslRenewalDays=180
        fi
    fi
    if [[ -d "$HOME/.acme.sh/${domain}_ecc" && -f "$HOME/.acme.sh/${domain}_ecc/${domain}.key" && -f "$HOME/.acme.sh/${domain}_ecc/${domain}.cer" ]] || [[ "${installDNSACMEStatus}" == "true" ]]; then
        modifyTime=

        if [[ "${installDNSACMEStatus}" == "true" ]]; then
            modifyTime=$(stat "$HOME/.acme.sh/*.${dnsTLSDomain}_ecc/*.${dnsTLSDomain}.cer" | sed -n '7,6p' | awk '{print $2" "$3" "$4" "$5}')
        else
            modifyTime=$(stat "$HOME/.acme.sh/${domain}_ecc/${domain}.cer" | sed -n '7,6p' | awk '{print $2" "$3" "$4" "$5}')
        fi

        modifyTime=$(date +%s -d "${modifyTime}")
        currentTime=$(date +%s)
        ((stampDiff = currentTime - modifyTime))
        ((days = stampDiff / 86400))
        ((remainingDays = sslRenewalDays - days))

        tlsStatus=${remainingDays}
        if [[ ${remainingDays} -le 0 ]]; then
            tlsStatus="已过期"
        fi

        echoContent skyBlue " ---> 证书检查日期:$(date "+%F %H:%M:%S")"
        echoContent skyBlue " ---> 证书生成日期:$(date -d @"${modifyTime}" +"%F %H:%M:%S")"
        echoContent skyBlue " ---> 证书生成天数:${days}"
        echoContent skyBlue " ---> 证书剩余天数:"${tlsStatus}
        echoContent skyBlue " ---> 证书过期前最后一天自动更新，如更新失败请手动更新"

        if [[ ${remainingDays} -le 1 ]]; then
            echoContent yellow " ---> 重新生成证书"
            handleNginx stop
            sudo "$HOME/.acme.sh/acme.sh" --cron --home "$HOME/.acme.sh"
            sudo "$HOME/.acme.sh/acme.sh" --installcert -d "${domain}" --fullchainpath /etc/v2ray-agent/tls/"${domain}.crt" --keypath /etc/v2ray-agent/tls/"${domain}.key" --ecc
            reloadCore
            handleNginx start
        else
            echoContent green " ---> 证书有效"
        fi
    else
        echoContent red " ---> 未安装"
    fi
}
# 查看TLS证书的状态
checkTLStatus() {

    if [[ -d "$HOME/.acme.sh/${currentHost}_ecc" ]] && [[ -f "$HOME/.acme.sh/${currentHost}_ecc/${currentHost}.key" ]] && [[ -f "$HOME/.acme.sh/${currentHost}_ecc/${currentHost}.cer" ]]; then
        modifyTime=$(stat "$HOME/.acme.sh/${currentHost}_ecc/${currentHost}.cer" | sed -n '7,6p' | awk '{print $2" "$3" "$4" "$5}')

        modifyTime=$(date +%s -d "${modifyTime}")
        currentTime=$(date +%s)
        ((stampDiff = currentTime - modifyTime))
        ((days = stampDiff / 86400))
        ((remainingDays = sslRenewalDays - days))

        tlsStatus=${remainingDays}
        if [[ ${remainingDays} -le 0 ]]; then
            tlsStatus="已过期"
        fi

        echoContent skyBlue " ---> 证书生成日期:$(date -d "@${modifyTime}" +"%F %H:%M:%S")"
        echoContent skyBlue " ---> 证书生成天数:${days}"
        echoContent skyBlue " ---> 证书剩余天数:${tlsStatus}"
    fi
}

# 安装V2Ray、指定版本
installV2Ray() {
    readInstallType
    echoContent skyBlue "\n进度  $1/${totalProgress} : 安装V2Ray"

    if [[ "${coreInstallType}" != "2" && "${coreInstallType}" != "3" ]]; then
        if [[ "${selectCoreType}" == "2" ]]; then

            version=$(curl -s https://api.github.com/repos/v2fly/v2ray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | grep -v 'v5' | head -1)
        else
            version=${v2rayCoreVersion}
        fi

        echoContent green " ---> v2ray-core版本:${version}"
        if wget --help | grep -q show-progress; then
            wget -c -q --show-progress -P /etc/v2ray-agent/v2ray/ "https://github.com/v2fly/v2ray-core/releases/download/${version}/${v2rayCoreCPUVendor}.zip"
        else
            wget -c -P /etc/v2ray-agent/v2ray/ "https://github.com/v2fly/v2ray-core/releases/download/${version}/${v2rayCoreCPUVendor}.zip" >/dev/null 2>&1
        fi

        unzip -o "/etc/v2ray-agent/v2ray/${v2rayCoreCPUVendor}.zip" -d /etc/v2ray-agent/v2ray >/dev/null
        rm -rf "/etc/v2ray-agent/v2ray/${v2rayCoreCPUVendor}.zip"
    else
        if [[ "${selectCoreType}" == "3" ]]; then
            echoContent green " ---> 锁定v2ray-core版本为v4.32.1"
            rm -f /etc/v2ray-agent/v2ray/v2ray
            rm -f /etc/v2ray-agent/v2ray/v2ctl
            installV2Ray "$1"
        else
            echoContent green " ---> v2ray-core版本:$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)"
            read -r -p "是否更新、升级？[y/n]:" reInstallV2RayStatus
            if [[ "${reInstallV2RayStatus}" == "y" ]]; then
                rm -f /etc/v2ray-agent/v2ray/v2ray
                rm -f /etc/v2ray-agent/v2ray/v2ctl
                installV2Ray "$1"
            fi
        fi
    fi
}

# 安装 hysteria
installHysteria() {
    readInstallType
    echoContent skyBlue "\n进度  $1/${totalProgress} : 安装Hysteria"

    if [[ -z "${hysteriaConfigPath}" ]]; then

        version=$(curl -s https://api.github.com/repos/apernet/hysteria/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | head -1)

        echoContent green " ---> Hysteria版本:${version}"
        if wget --help | grep -q show-progress; then
            wget -c -q --show-progress -P /etc/v2ray-agent/hysteria/ "https://github.com/apernet/hysteria/releases/download/${version}/${hysteriaCoreCPUVendor}"
        else
            wget -c -P /etc/v2ray-agent/hysteria/ "https://github.com/apernet/hysteria/releases/download/${version}/${hysteriaCoreCPUVendor}" >/dev/null 2>&1
        fi
        mv "/etc/v2ray-agent/hysteria/${hysteriaCoreCPUVendor}" /etc/v2ray-agent/hysteria/hysteria
        chmod 655 /etc/v2ray-agent/hysteria/hysteria
    else
        echoContent green " ---> Hysteria版本:$(/etc/v2ray-agent/hysteria/hysteria --version | awk '{print $3}')"
        read -r -p "是否更新、升级？[y/n]:" reInstallHysteriaStatus
        if [[ "${reInstallHysteriaStatus}" == "y" ]]; then
            rm -f /etc/v2ray-agent/hysteria/hysteria
            installHysteria "$1"
        fi
    fi

}
# 安装xray
installXray() {
    readInstallType
    echoContent skyBlue "\n进度  $1/${totalProgress} : 安装Xray"

    if [[ "${coreInstallType}" != "1" ]]; then

        version=$(curl -s https://api.github.com/repos/XTLS/Xray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | head -1)

        echoContent green " ---> Xray-core版本:${version}"
        if wget --help | grep -q show-progress; then
            wget -c -q --show-progress -P /etc/v2ray-agent/xray/ "https://github.com/XTLS/Xray-core/releases/download/${version}/${xrayCoreCPUVendor}.zip"
        else
            wget -c -P /etc/v2ray-agent/xray/ "https://github.com/XTLS/Xray-core/releases/download/${version}/${xrayCoreCPUVendor}.zip" >/dev/null 2>&1
        fi

        unzip -o "/etc/v2ray-agent/xray/${xrayCoreCPUVendor}.zip" -d /etc/v2ray-agent/xray >/dev/null
        rm -rf "/etc/v2ray-agent/xray/${xrayCoreCPUVendor}.zip"
        chmod 655 /etc/v2ray-agent/xray/xray
    else
        echoContent green " ---> Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)"
        read -r -p "是否更新、升级？[y/n]:" reInstallXrayStatus
        if [[ "${reInstallXrayStatus}" == "y" ]]; then
            rm -f /etc/v2ray-agent/xray/xray
            installXray "$1"
        fi
    fi
}

# v2ray版本管理
v2rayVersionManageMenu() {
    echoContent skyBlue "\n进度  $1/${totalProgress} : V2Ray版本管理"
    if [[ ! -d "/etc/v2ray-agent/v2ray/" ]]; then
        echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容"
        menu
        exit 0
    fi
    echoContent red "\n=============================================================="
    echoContent yellow "1.升级v2ray-core"
    echoContent yellow "2.回退v2ray-core"
    echoContent yellow "3.关闭v2ray-core"
    echoContent yellow "4.打开v2ray-core"
    echoContent yellow "5.重启v2ray-core"
    echoContent yellow "6.更新geosite、geoip"
    echoContent red "=============================================================="
    read -r -p "请选择:" selectV2RayType
    if [[ "${selectV2RayType}" == "1" ]]; then
        updateV2Ray
    elif [[ "${selectV2RayType}" == "2" ]]; then
        echoContent yellow "\n1.只可以回退最近的五个版本"
        echoContent yellow "2.不保证回退后一定可以正常使用"
        echoContent yellow "3.如果回退的版本不支持当前的config，则会无法连接，谨慎操作"
        echoContent skyBlue "------------------------Version-------------------------------"
        curl -s https://api.github.com/repos/v2fly/v2ray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | grep -v 'v5' | head -5 | awk '{print ""NR""":"$0}'

        echoContent skyBlue "--------------------------------------------------------------"
        read -r -p "请输入要回退的版本:" selectV2rayVersionType
        version=$(curl -s https://api.github.com/repos/v2fly/v2ray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | grep -v 'v5' | head -5 | awk '{print ""NR""":"$0}' | grep "${selectV2rayVersionType}:" | awk -F "[:]" '{print $2}')
        if [[ -n "${version}" ]]; then
            updateV2Ray "${version}"
        else
            echoContent red "\n ---> 输入有误，请重新输入"
            v2rayVersionManageMenu 1
        fi
    elif [[ "${selectV2RayType}" == "3" ]]; then
        handleV2Ray stop
    elif [[ "${selectV2RayType}" == "4" ]]; then
        handleV2Ray start
    elif [[ "${selectV2RayType}" == "5" ]]; then
        reloadCore
    elif [[ "${selectXrayType}" == "6" ]]; then
        updateGeoSite
    fi
}

# xray版本管理
xrayVersionManageMenu() {
    echoContent skyBlue "\n进度  $1/${totalProgress} : Xray版本管理"
    if [[ ! -d "/etc/v2ray-agent/xray/" ]]; then
        echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容"
        menu
        exit 0
    fi
    echoContent red "\n=============================================================="
    echoContent yellow "1.升级Xray-core"
    echoContent yellow "2.升级Xray-core 预览版"
    echoContent yellow "3.回退Xray-core"
    echoContent yellow "4.关闭Xray-core"
    echoContent yellow "5.打开Xray-core"
    echoContent yellow "6.重启Xray-core"
    echoContent yellow "7.更新geosite、geoip"
    echoContent red "=============================================================="
    read -r -p "请选择:" selectXrayType
    if [[ "${selectXrayType}" == "1" ]]; then
        updateXray
    elif [[ "${selectXrayType}" == "2" ]]; then

        prereleaseStatus=true
        updateXray

    elif [[ "${selectXrayType}" == "3" ]]; then
        echoContent yellow "\n1.只可以回退最近的五个版本"
        echoContent yellow "2.不保证回退后一定可以正常使用"
        echoContent yellow "3.如果回退的版本不支持当前的config，则会无法连接，谨慎操作"
        echoContent skyBlue "------------------------Version-------------------------------"
        curl -s https://api.github.com/repos/XTLS/Xray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | head -5 | awk '{print ""NR""":"$0}'
        echoContent skyBlue "--------------------------------------------------------------"
        read -r -p "请输入要回退的版本:" selectXrayVersionType
        version=$(curl -s https://api.github.com/repos/XTLS/Xray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | head -5 | awk '{print ""NR""":"$0}' | grep "${selectXrayVersionType}:" | awk -F "[:]" '{print $2}')
        if [[ -n "${version}" ]]; then
            updateXray "${version}"
        else
            echoContent red "\n ---> 输入有误，请重新输入"
            xrayVersionManageMenu 1
        fi
    elif [[ "${selectXrayType}" == "4" ]]; then
        handleXray stop
    elif [[ "${selectXrayType}" == "5" ]]; then
        handleXray start
    elif [[ "${selectXrayType}" == "6" ]]; then
        reloadCore
    elif [[ "${selectXrayType}" == "7" ]]; then
        updateGeoSite
    fi

}

# 更新 geosite
updateGeoSite() {
    echoContent yellow "\n来源 https://github.com/Loyalsoldier/v2ray-rules-dat"

    version=$(curl -s https://api.github.com/repos/Loyalsoldier/v2ray-rules-dat/releases | jq -r '.[]|.tag_name' | head -1)
    echoContent skyBlue "------------------------Version-------------------------------"
    echo "version:${version}"
    wget -c -q --show-progress -P ${configPath}../ "https://github.com/Loyalsoldier/v2ray-rules-dat/releases/download/${version}/geosite.dat"
    wget -c -q --show-progress -P ${configPath}../ "https://github.com/Loyalsoldier/v2ray-rules-dat/releases/download/${version}/geoip.dat"
    reloadCore
    echoContent green " ---> 更新完毕"

}
# 更新V2Ray
updateV2Ray() {
    readInstallType
    if [[ -z "${coreInstallType}" ]]; then

        if [[ -n "$1" ]]; then
            version=$1
        else
            version=$(curl -s https://api.github.com/repos/v2fly/v2ray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | grep -v 'v5' | head -1)
        fi
        # 使用锁定的版本
        if [[ -n "${v2rayCoreVersion}" ]]; then
            version=${v2rayCoreVersion}
        fi
        echoContent green " ---> v2ray-core版本:${version}"

        if wget --help | grep -q show-progress; then
            wget -c -q --show-progress -P /etc/v2ray-agent/v2ray/ "https://github.com/v2fly/v2ray-core/releases/download/${version}/${v2rayCoreCPUVendor}.zip"
        else
            wget -c -P "/etc/v2ray-agent/v2ray/ https://github.com/v2fly/v2ray-core/releases/download/${version}/${v2rayCoreCPUVendor}.zip" >/dev/null 2>&1
        fi

        unzip -o "/etc/v2ray-agent/v2ray/${v2rayCoreCPUVendor}.zip" -d /etc/v2ray-agent/v2ray >/dev/null
        rm -rf "/etc/v2ray-agent/v2ray/${v2rayCoreCPUVendor}.zip"
        handleV2Ray stop
        handleV2Ray start
    else
        echoContent green " ---> 当前v2ray-core版本:$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)"

        if [[ -n "$1" ]]; then
            version=$1
        else
            version=$(curl -s https://api.github.com/repos/v2fly/v2ray-core/releases | jq -r '.[]|select (.prerelease==false)|.tag_name' | grep -v 'v5' | head -1)
        fi

        if [[ -n "${v2rayCoreVersion}" ]]; then
            version=${v2rayCoreVersion}
        fi
        if [[ -n "$1" ]]; then
            read -r -p "回退版本为${version}，是否继续？[y/n]:" rollbackV2RayStatus
            if [[ "${rollbackV2RayStatus}" == "y" ]]; then
                if [[ "${coreInstallType}" == "2" ]]; then
                    echoContent green " ---> 当前v2ray-core版本:$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)"
                elif [[ "${coreInstallType}" == "1" ]]; then
                    echoContent green " ---> 当前Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)"
                fi

                handleV2Ray stop
                rm -f /etc/v2ray-agent/v2ray/v2ray
                rm -f /etc/v2ray-agent/v2ray/v2ctl
                updateV2Ray "${version}"
            else
                echoContent green " ---> 放弃回退版本"
            fi
        elif [[ "${version}" == "v$(/etc/v2ray-agent/v2ray/v2ray --version | awk '{print $2}' | head -1)" ]]; then
            read -r -p "当前版本与最新版相同，是否重新安装？[y/n]:" reInstallV2RayStatus
            if [[ "${reInstallV2RayStatus}" == "y" ]]; then
                handleV2Ray stop
                rm -f /etc/v2ray-agent/v2ray/v2ray
                rm -f /etc/v2ray-agent/v2ray/v2ctl
                updateV2Ray
            else
                echoContent green " ---> 放弃重新安装"
            fi
        else
            read -r -p "最新版本为:${version}，是否更新？[y/n]:" installV2RayStatus
            if [[ "${installV2RayStatus}" == "y" ]]; then
                rm -f /etc/v2ray-agent/v2ray/v2ray
                rm -f /etc/v2ray-agent/v2ray/v2ctl
                updateV2Ray
            else
                echoContent green " ---> 放弃更新"
            fi

        fi
    fi
}

# 更新Xray
updateXray() {
    readInstallType
    if [[ -z "${coreInstallType}" ]]; then
        if [[ -n "$1" ]]; then
            version=$1
        else
            version=$(curl -s https://api.github.com/repos/XTLS/Xray-core/releases | jq -r ".[]|select (.prerelease==${prereleaseStatus})|.tag_name" | head -1)
        fi

        echoContent green " ---> Xray-core版本:${version}"

        if wget --help | grep -q show-progress; then
            wget -c -q --show-progress -P /etc/v2ray-agent/xray/ "https://github.com/XTLS/Xray-core/releases/download/${version}/${xrayCoreCPUVendor}.zip"
        else
            wget -c -P /etc/v2ray-agent/xray/ "https://github.com/XTLS/Xray-core/releases/download/${version}/${xrayCoreCPUVendor}.zip" >/dev/null 2>&1
        fi

        unzip -o "/etc/v2ray-agent/xray/${xrayCoreCPUVendor}.zip" -d /etc/v2ray-agent/xray >/dev/null
        rm -rf "/etc/v2ray-agent/xray/${xrayCoreCPUVendor}.zip"
        chmod 655 /etc/v2ray-agent/xray/xray
        handleXray stop
        handleXray start
    else
        echoContent green " ---> 当前Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)"

        if [[ -n "$1" ]]; then
            version=$1
        else
            version=$(curl -s https://api.github.com/repos/XTLS/Xray-core/releases | jq -r ".[]|select (.prerelease==${prereleaseStatus})|.tag_name" | head -1)
        fi

        if [[ -n "$1" ]]; then
            read -r -p "回退版本为${version}，是否继续？[y/n]:" rollbackXrayStatus
            if [[ "${rollbackXrayStatus}" == "y" ]]; then
                echoContent green " ---> 当前Xray-core版本:$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)"

                handleXray stop
                rm -f /etc/v2ray-agent/xray/xray
                updateXray "${version}"
            else
                echoContent green " ---> 放弃回退版本"
            fi
        elif [[ "${version}" == "v$(/etc/v2ray-agent/xray/xray --version | awk '{print $2}' | head -1)" ]]; then
            read -r -p "当前版本与最新版相同，是否重新安装？[y/n]:" reInstallXrayStatus
            if [[ "${reInstallXrayStatus}" == "y" ]]; then
                handleXray stop
                rm -f /etc/v2ray-agent/xray/xray
                rm -f /etc/v2ray-agent/xray/xray
                updateXray
            else
                echoContent green " ---> 放弃重新安装"
            fi
        else
            read -r -p "最新版本为:${version}，是否更新？[y/n]:" installXrayStatus
            if [[ "${installXrayStatus}" == "y" ]]; then
                rm -f /etc/v2ray-agent/xray/xray
                updateXray
            else
                echoContent green " ---> 放弃更新"
            fi

        fi
    fi
}

# 验证整个服务是否可用
checkGFWStatue() {
    readInstallType
    echoContent skyBlue "\n进度 $1/${totalProgress} : 验证服务启动状态"
    if [[ "${coreInstallType}" == "1" ]] && [[ -n $(pgrep -f xray/xray) ]]; then
        echoContent green " ---> 服务启动成功"
    elif [[ "${coreInstallType}" == "2" ]] && [[ -n $(pgrep -f v2ray/v2ray) ]]; then
        echoContent green " ---> 服务启动成功"
    else
        echoContent red " ---> 服务启动失败，请检查终端是否有日志打印"
        exit 0
    fi

}

# V2Ray开机自启
installV2RayService() {
    echoContent skyBlue "\n进度  $1/${totalProgress} : 配置V2Ray开机自启"
    if [[ -n $(find /bin /usr/bin -name "systemctl") ]]; then
        rm -rf /etc/systemd/system/v2ray.service
        touch /etc/systemd/system/v2ray.service
        execStart='/etc/v2ray-agent/v2ray/v2ray -confdir /etc/v2ray-agent/v2ray/conf'
        cat <<EOF >/etc/systemd/system/v2ray.service
[Unit]
Description=V2Ray - A unified platform for anti-censorship
Documentation=https://v2ray.com https://guide.v2fly.org
After=network.target nss-lookup.target
Wants=network-online.target

[Service]
Type=simple
User=root
CapabilityBoundingSet=CAP_NET_BIND_SERVICE CAP_NET_RAW
NoNewPrivileges=yes
ExecStart=${execStart}
Restart=on-failure
RestartPreventExitStatus=23
LimitNPROC=10000
LimitNOFILE=1000000

[Install]
WantedBy=multi-user.target
EOF
        systemctl daemon-reload
        systemctl enable v2ray.service
        echoContent green " ---> 配置V2Ray开机自启成功"
    fi
}

# 安装hysteria开机自启
installHysteriaService() {
    echoContent skyBlue "\n进度  $1/${totalProgress} : 配置Hysteria开机自启"
    if [[ -n $(find /bin /usr/bin -name "systemctl") ]]; then
        rm -rf /etc/systemd/system/hysteria.service
        touch /etc/systemd/system/hysteria.service
        execStart='/etc/v2ray-agent/hysteria/hysteria --log-level info -c /etc/v2ray-agent/hysteria/conf/config.json server'
        cat <<EOF >/etc/systemd/system/hysteria.service
    [Unit]
    Description=Hysteria Service
    Documentation=https://github.com/apernet/hysteria/wiki
    After=network.target nss-lookup.target
    Wants=network-online.target

    [Service]
    Type=simple
    User=root
    CapabilityBoundingSet=CAP_NET_BIND_SERVICE CAP_NET_RAW
    NoNewPrivileges=yes
    ExecStart=${execStart}
    Restart=on-failure
    RestartPreventExitStatus=23
    LimitNPROC=10000
    LimitNOFILE=1000000

    [Install]
    WantedBy=multi-user.target
EOF
        systemctl daemon-reload
        systemctl enable hysteria.service
        echoContent green " ---> 配置Hysteria开机自启成功"
    fi
}
# Xray开机自启
installXrayService() {
    echoContent skyBlue "\n进度  $1/${totalProgress} : 配置Xray开机自启"
    if [[ -n $(find /bin /usr/bin -name "systemctl") ]]; then
        rm -rf /etc/systemd/system/xray.service
        touch /etc/systemd/system/xray.service
        execStart='/etc/v2ray-agent/xray/xray run -confdir /etc/v2ray-agent/xray/conf'
        cat <<EOF >/etc/systemd/system/xray.service
[Unit]
Description=Xray Service
Documentation=https://github.com/XTLS/Xray-core
After=network.target nss-lookup.target
Wants=network-online.target

[Service]
Type=simple
User=root
CapabilityBoundingSet=CAP_NET_BIND_SERVICE CAP_NET_RAW
NoNewPrivileges=yes
ExecStart=${execStart}
Restart=on-failure
RestartPreventExitStatus=23
LimitNPROC=10000
LimitNOFILE=1000000

[Install]
WantedBy=multi-user.target
EOF
        systemctl daemon-reload
        systemctl enable xray.service
        echoContent green " ---> 配置Xray开机自启成功"
    fi
}

# 操作V2Ray
handleV2Ray() {
    # shellcheck disable=SC2010
    if find /bin /usr/bin | grep -q systemctl && ls /etc/systemd/system/ | grep -q v2ray.service; then
        if [[ -z $(pgrep -f "v2ray/v2ray") ]] && [[ "$1" == "start" ]]; then
            systemctl start v2ray.service
        elif [[ -n $(pgrep -f "v2ray/v2ray") ]] && [[ "$1" == "stop" ]]; then
            systemctl stop v2ray.service
        fi
    fi
    sleep 0.8

    if [[ "$1" == "start" ]]; then
        if [[ -n $(pgrep -f "v2ray/v2ray") ]]; then
            echoContent green " ---> V2Ray启动成功"
        else
            echoContent red "V2Ray启动失败"
            echoContent red "请手动执行【/etc/v2ray-agent/v2ray/v2ray -confdir /etc/v2ray-agent/v2ray/conf】，查看错误日志"
            exit 0
        fi
    elif [[ "$1" == "stop" ]]; then
        if [[ -z $(pgrep -f "v2ray/v2ray") ]]; then
            echoContent green " ---> V2Ray关闭成功"
        else
            echoContent red "V2Ray关闭失败"
            echoContent red "请手动执行【ps -ef|grep -v grep|grep v2ray|awk '{print \$2}'|xargs kill -9】"
            exit 0
        fi
    fi
}

# 操作Hysteria
handleHysteria() {
    # shellcheck disable=SC2010
    if find /bin /usr/bin | grep -q systemctl && ls /etc/systemd/system/ | grep -q hysteria.service; then
        if [[ -z $(pgrep -f "hysteria/hysteria") ]] && [[ "$1" == "start" ]]; then
            systemctl start hysteria.service
        elif [[ -n $(pgrep -f "hysteria/hysteria") ]] && [[ "$1" == "stop" ]]; then
            systemctl stop hysteria.service
        fi
    fi
    sleep 0.8

    if [[ "$1" == "start" ]]; then
        if [[ -n $(pgrep -f "hysteria/hysteria") ]]; then
            echoContent green " ---> Hysteria启动成功"
        else
            echoContent red "Hysteria启动失败"
            echoContent red "请手动执行【/etc/v2ray-agent/hysteria/hysteria --log-level debug -c /etc/v2ray-agent/hysteria/conf/config.json server】，查看错误日志"
            exit 0
        fi
    elif [[ "$1" == "stop" ]]; then
        if [[ -z $(pgrep -f "hysteria/hysteria") ]]; then
            echoContent green " ---> Hysteria关闭成功"
        else
            echoContent red "Hysteria关闭失败"
            echoContent red "请手动执行【ps -ef|grep -v grep|grep hysteria|awk '{print \$2}'|xargs kill -9】"
            exit 0
        fi
    fi
}
# 操作xray
handleXray() {
    if [[ -n $(find /bin /usr/bin -name "systemctl") ]] && [[ -n $(find /etc/systemd/system/ -name "xray.service") ]]; then
        if [[ -z $(pgrep -f "xray/xray") ]] && [[ "$1" == "start" ]]; then
            systemctl start xray.service
        elif [[ -n $(pgrep -f "xray/xray") ]] && [[ "$1" == "stop" ]]; then
            systemctl stop xray.service
        fi
    fi

    sleep 0.8

    if [[ "$1" == "start" ]]; then
        if [[ -n $(pgrep -f "xray/xray") ]]; then
            echoContent green " ---> Xray启动成功"
        else
            echoContent red "Xray启动失败"
            echoContent red "请手动执行【/etc/v2ray-agent/xray/xray -confdir /etc/v2ray-agent/xray/conf】，查看错误日志"
            exit 0
        fi
    elif [[ "$1" == "stop" ]]; then
        if [[ -z $(pgrep -f "xray/xray") ]]; then
            echoContent green " ---> Xray关闭成功"
        else
            echoContent red "xray关闭失败"
            echoContent red "请手动执行【ps -ef|grep -v grep|grep xray|awk '{print \$2}'|xargs kill -9】"
            exit 0
        fi
    fi
}
# 获取clients配置
getClients() {
    local path=$1

    local addClientsStatus=$2
    previousClients=
    if [[ ${addClientsStatus} == "true" ]]; then
        if [[ ! -f "${path}" ]]; then
            echo
            local protocol
            protocol=$(echo "${path}" | awk -F "[_]" '{print $2 $3}')
            echoContent yellow "没有读取到此协议[${protocol}]上一次安装的配置文件，采用配置文件的第一个uuid"
        else
            previousClients=$(jq -r ".inbounds[0].settings.clients" "${path}")
        fi

    fi
}

# 添加client配置
addClients() {
    local path=$1
    local addClientsStatus=$2
    if [[ ${addClientsStatus} == "true" && -n "${previousClients}" ]]; then
        config=$(jq -r ".inbounds[0].settings.clients = ${previousClients}" "${path}")
        echo "${config}" | jq . >"${path}"
    fi
}
# 添加hysteria配置
addClientsHysteria() {
    local path=$1
    local addClientsStatus=$2

    if [[ ${addClientsStatus} == "true" && -n "${previousClients}" ]]; then
        local uuids=
        uuids=$(echo "${previousClients}" | jq -r [.[].id])

        if [[ "${frontingType}" == "02_trojan_TCP_inbounds" ]]; then
            uuids=$(echo "${previousClients}" | jq -r [.[].password])
        fi
        config=$(jq -r ".auth.config = ${uuids}" "${path}")
        echo "${config}" | jq . >"${path}"
    fi
}

# 初始化hysteria端口
initHysteriaPort() {
    readHysteriaConfig
    if [[ -n "${hysteriaPort}" ]]; then
        read -r -p "读取到上次安装时的端口，是否使用上次安装时的端口？[y/n]:" historyHysteriaPortStatus
        if [[ "${historyHysteriaPortStatus}" == "y" ]]; then
            echoContent yellow "\n ---> 端口: ${hysteriaPort}"
        else
            hysteriaPort=
        fi
    fi

    if [[ -z "${hysteriaPort}" ]]; then
        echoContent yellow "请输入Hysteria端口[例: 10000]，不可与其他服务重复"
        read -r -p "端口:" hysteriaPort
    fi
    if [[ -z ${hysteriaPort} ]]; then
        echoContent red " ---> 端口不可为空"
        initHysteriaPort "$2"
    elif ((hysteriaPort < 1 || hysteriaPort > 65535)); then
        echoContent red " ---> 端口不合法"
        initHysteriaPort "$2"
    fi
    allowPort "${hysteriaPort}"
}

# 初始化hysteria的协议
initHysteriaProtocol() {
    echoContent skyBlue "\n请选择协议类型"
    echoContent red "=============================================================="
    echoContent yellow "1.udp(QUIC)(默认)"
    echoContent yellow "2.faketcp"
    echoContent yellow "3.wechat-video"
    echoContent red "=============================================================="
    read -r -p "请选择:" selectHysteriaProtocol
    case ${selectHysteriaProtocol} in
    1)
        hysteriaProtocol="udp"
        ;;
    2)
        hysteriaProtocol="faketcp"
        ;;
    3)
        hysteriaProtocol="wechat-video"
        ;;
    *)
        hysteriaProtocol="udp"
        ;;
    esac
    echoContent yellow "\n ---> 协议: ${hysteriaProtocol}\n"
}

# 初始化hysteria网络信息
initHysteriaNetwork() {

    echoContent yellow "请输入本地到服务器的平均延迟，请按照真实情况填写（默认：180，单位：ms）"
    read -r -p "延迟:" hysteriaLag
    if [[ -z "${hysteriaLag}" ]]; then
        hysteriaLag=180
        echoContent yellow "\n ---> 延迟: ${hysteriaLag}\n"
    fi

    echoContent yellow "请输入本地带宽峰值的下行速度（默认：100，单位：Mbps）"
    read -r -p "下行速度:" hysteriaClientDownloadSpeed
    if [[ -z "${hysteriaClientDownloadSpeed}" ]]; then
        hysteriaClientDownloadSpeed=100
        echoContent yellow "\n ---> 下行速度: ${hysteriaClientDownloadSpeed}\n"
    fi

    echoContent yellow "请输入本地带宽峰值的上行速度（默认：50，单位：Mbps）"
    read -r -p "上行速度:" hysteriaClientUploadSpeed
    if [[ -z "${hysteriaClientUploadSpeed}" ]]; then
        hysteriaClientUploadSpeed=50
        echoContent yellow "\n ---> 上行速度: ${hysteriaClientUploadSpeed}\n"
    fi

    cat <<EOF >/etc/v2ray-agent/hysteria/conf/client_network.json
{
	"hysteriaLag":"${hysteriaLag}",
	"hysteriaClientUploadSpeed":"${hysteriaClientUploadSpeed}",
	"hysteriaClientDownloadSpeed":"${hysteriaClientDownloadSpeed}"
}
EOF

}
# 初始化Hysteria配置
initHysteriaConfig() {
    echoContent skyBlue "\n进度 $1/${totalProgress} : 初始化Hysteria配置"

    initHysteriaPort
    initHysteriaProtocol
    initHysteriaNetwork

    getClients "${configPath}${frontingType}.json" true
    cat <<EOF >/etc/v2ray-agent/hysteria/conf/config.json
{
	"listen": ":${hysteriaPort}",
	"protocol": "${hysteriaProtocol}",
	"disable_udp": false,
	"cert": "/etc/v2ray-agent/tls/${currentHost}.crt",
	"key": "/etc/v2ray-agent/tls/${currentHost}.key",
	"auth": {
		"mode": "passwords",
		"config": []
	},
	"alpn": "h3",
	"recv_window_conn": 15728640,
	"recv_window_client": 67108864,
	"max_conn_client": 4096,
	"disable_mtu_discovery": true,
	"resolve_preference": "46",
	"resolver": "https://8.8.8.8:443/dns-query"
}
EOF

    addClientsHysteria "/etc/v2ray-agent/hysteria/conf/config.json" true
}

# 初始化V2Ray 配置文件
initV2RayConfig() {
    echoContent skyBlue "\n进度 $2/${totalProgress} : 初始化V2Ray配置"
    echo

    read -r -p "是否自定义UUID ？[y/n]:" customUUIDStatus
    echo
    if [[ "${customUUIDStatus}" == "y" ]]; then
        read -r -p "请输入合法的UUID:" currentCustomUUID
        if [[ -n "${currentCustomUUID}" ]]; then
            uuid=${currentCustomUUID}
        fi
    fi
    local addClientsStatus=
    if [[ -n "${currentUUID}" && -z "${uuid}" ]]; then
        read -r -p "读取到上次安装记录，是否使用上次安装时的UUID ？[y/n]:" historyUUIDStatus
        if [[ "${historyUUIDStatus}" == "y" ]]; then
            uuid=${currentUUID}
            addClientsStatus=true
        else
            uuid=$(/etc/v2ray-agent/v2ray/v2ctl uuid)
        fi
    elif [[ -z "${uuid}" ]]; then
        uuid=$(/etc/v2ray-agent/v2ray/v2ctl uuid)
    fi

    if [[ -z "${uuid}" ]]; then
        addClientsStatus=
        echoContent red "\n ---> uuid读取错误，重新生成"
        uuid=$(/etc/v2ray-agent/v2ray/v2ctl uuid)
    fi

    movePreviousConfig
    # log
    cat <<EOF >/etc/v2ray-agent/v2ray/conf/00_log.json
{
  "log": {
    "error": "/etc/v2ray-agent/v2ray/error.log",
    "loglevel": "warning"
  }
}
EOF
    # outbounds
    if [[ -n "${pingIPv6}" ]]; then
        cat <<EOF >/etc/v2ray-agent/v2ray/conf/10_ipv6_outbounds.json
{
    "outbounds": [
        {
          "protocol": "freedom",
          "settings": {},
          "tag": "direct"
        }
    ]
}
EOF

    else
        cat <<EOF >/etc/v2ray-agent/v2ray/conf/10_ipv4_outbounds.json
{
    "outbounds":[
        {
            "protocol":"freedom",
            "settings":{
                "domainStrategy":"UseIPv4"
            },
            "tag":"IPv4-out"
        },
        {
            "protocol":"freedom",
            "settings":{
                "domainStrategy":"UseIPv6"
            },
            "tag":"IPv6-out"
        },
        {
            "protocol":"blackhole",
            "tag":"blackhole-out"
        }
    ]
}
EOF
    fi

    # dns
    cat <<EOF >/etc/v2ray-agent/v2ray/conf/11_dns.json
{
    "dns": {
        "servers": [
          "localhost"
        ]
  }
}
EOF

    # VLESS_TCP_TLS
    # 回落nginx
    local fallbacksList='{"dest":31300,"xver":0},{"alpn":"h2","dest":31302,"xver":0}'

    # trojan
    if echo "${selectCustomInstallType}" | grep -q 4 || [[ "$1" == "all" ]]; then

        fallbacksList='{"dest":31296,"xver":1},{"alpn":"h2","dest":31302,"xver":0}'

        getClients "${configPath}../tmp/04_trojan_TCP_inbounds.json" "${addClientsStatus}"
        cat <<EOF >/etc/v2ray-agent/v2ray/conf/04_trojan_TCP_inbounds.json
{
"inbounds":[
	{
	  "port": 31296,
	  "listen": "127.0.0.1",
	  "protocol": "trojan",
	  "tag":"trojanTCP",
	  "settings": {
		"clients": [
		  {
			"password": "${uuid}",
			"email": "default_Trojan_TCP"
		  }
		],
		"fallbacks":[
			{"dest":"31300"}
		]
	  },
	  "streamSettings": {
		"network": "tcp",
		"security": "none",
		"tcpSettings": {
			"acceptProxyProtocol": true
		}
	  }
	}
	]
}
EOF
        addClients "/etc/v2ray-agent/v2ray/conf/04_trojan_TCP_inbounds.json" "${addClientsStatus}"
    fi

    # VLESS_WS_TLS
    if echo "${selectCustomInstallType}" | grep -q 1 || [[ "$1" == "all" ]]; then
        fallbacksList=${fallbacksList}',{"path":"/'${customPath}'ws","dest":31297,"xver":1}'
        getClients "${configPath}../tmp/03_VLESS_WS_inbounds.json" "${addClientsStatus}"
        cat <<EOF >/etc/v2ray-agent/v2ray/conf/03_VLESS_WS_inbounds.json
{
"inbounds":[
    {
	  "port": 31297,
	  "listen": "127.0.0.1",
	  "protocol": "vless",
	  "tag":"VLESSWS",
	  "settings": {
		"clients": [
		  {
			"id": "${uuid}",
			"email": "default_VLESS_WS"
		  }
		],
		"decryption": "none"
	  },
	  "streamSettings": {
		"network": "ws",
		"security": "none",
		"wsSettings": {
		  "acceptProxyProtocol": true,
		  "path": "/${customPath}ws"
		}
	  }
	}
]
}
EOF
        addClients "/etc/v2ray-agent/v2ray/conf/03_VLESS_WS_inbounds.json" "${addClientsStatus}"
    fi

    # trojan_grpc
    if echo "${selectCustomInstallType}" | grep -q 2 || [[ "$1" == "all" ]]; then
        if ! echo "${selectCustomInstallType}" | grep -q 5 && [[ -n ${selectCustomInstallType} ]]; then
            fallbacksList=${fallbacksList//31302/31304}
        fi
        getClients "${configPath}../tmp/04_trojan_gRPC_inbounds.json" "${addClientsStatus}"
        cat <<EOF >/etc/v2ray-agent/v2ray/conf/04_trojan_gRPC_inbounds.json
{
    "inbounds": [
        {
            "port": 31304,
            "listen": "127.0.0.1",
            "protocol": "trojan",
            "tag": "trojangRPCTCP",
            "settings": {
                "clients": [
                    {
                        "password": "${uuid}",
                        "email": "default_Trojan_gRPC"
                    }
                ],
                "fallbacks": [
                    {
                        "dest": "31300"
                    }
                ]
            },
            "streamSettings": {
                "network": "grpc",
                "grpcSettings": {
                    "serviceName": "${customPath}trojangrpc"
                }
            }
        }
    ]
}
EOF
        addClients "/etc/v2ray-agent/v2ray/conf/04_trojan_gRPC_inbounds.json" "${addClientsStatus}"
    fi

    # VMess_WS
    if echo "${selectCustomInstallType}" | grep -q 3 || [[ "$1" == "all" ]]; then
        fallbacksList=${fallbacksList}',{"path":"/'${customPath}'vws","dest":31299,"xver":1}'

        getClients "${configPath}../tmp/05_VMess_WS_inbounds.json" "${addClientsStatus}"

        cat <<EOF >/etc/v2ray-agent/v2ray/conf/05_VMess_WS_inbounds.json
{
"inbounds":[
{
  "listen": "127.0.0.1",
  "port": 31299,
  "protocol": "vmess",
  "tag":"VMessWS",
  "settings": {
    "clients": [
      {
        "id": "${uuid}",
        "alterId": 0,
        "add": "${add}",
        "email": "default_VMess_WS"
      }
    ]
  },
  "streamSettings": {
    "network": "ws",
    "security": "none",
    "wsSettings": {
      "acceptProxyProtocol": true,
      "path": "/${customPath}vws"
    }
  }
}
]
}
EOF
        addClients "/etc/v2ray-agent/v2ray/conf/05_VMess_WS_inbounds.json" "${addClientsStatus}"
    fi

    if echo "${selectCustomInstallType}" | grep -q 5 || [[ "$1" == "all" ]]; then
        getClients "${configPath}../tmp/06_VLESS_gRPC_inbounds.json" "${addClientsStatus}"
        cat <<EOF >/etc/v2ray-agent/v2ray/conf/06_VLESS_gRPC_inbounds.json
{
    "inbounds":[
    {
        "port": 31301,
        "listen": "127.0.0.1",
        "protocol": "vless",
        "tag":"VLESSGRPC",
        "settings": {
            "clients": [
                {
                    "id": "${uuid}",
                    "add": "${add}",
                    "email": "default_VLESS_gRPC"
                }
            ],
            "decryption": "none"
        },
        "streamSettings": {
            "network": "grpc",
            "grpcSettings": {
                "serviceName": "${customPath}grpc"
            }
        }
    }
]
}
EOF
        addClients "/etc/v2ray-agent/v2ray/conf/06_VLESS_gRPC_inbounds.json" "${addClientsStatus}"
    fi

    # VLESS_TCP
    getClients "${configPath}../tmp/02_VLESS_TCP_inbounds.json" "${addClientsStatus}"
    local defaultPort=443
    if [[ -n "${customPort}" ]]; then
        defaultPort=${customPort}
    fi

    cat <<EOF >/etc/v2ray-agent/v2ray/conf/02_VLESS_TCP_inbounds.json
{
"inbounds":[
{
  "port": ${defaultPort},
  "protocol": "vless",
  "tag":"VLESSTCP",
  "settings": {
    "clients": [
     {
        "id": "${uuid}",
        "add":"${add}",
        "email": "default_VLESS_TCP"
      }
    ],
    "decryption": "none",
    "fallbacks": [
        ${fallbacksList}
    ]
  },
  "streamSettings": {
    "network": "tcp",
    "security": "tls",
    "tlsSettings": {
      "minVersion": "1.2",
      "alpn": [
        "http/1.1",
        "h2"
      ],
      "certificates": [
        {
          "certificateFile": "/etc/v2ray-agent/tls/${domain}.crt",
          "keyFile": "/etc/v2ray-agent/tls/${domain}.key",
          "ocspStapling": 3600,
          "usage":"encipherment"
        }
      ]
    }
  }
}
]
}
EOF
    addClients "/etc/v2ray-agent/v2ray/conf/02_VLESS_TCP_inbounds.json" "${addClientsStatus}"

}

# 初始化Xray Trojan XTLS 配置文件
initXrayFrontingConfig() {
    echoContent red " ---> Trojan暂不支持 xtls-rprx-vision"
    exit 0
    if [[ -z "${configPath}" ]]; then
        echoContent red " ---> 未安装，请使用脚本安装"
        menu
        exit 0
    fi
    if [[ "${coreInstallType}" != "1" ]]; then
        echoContent red " ---> 未安装可用类型"
    fi
    local xtlsType=
    if echo ${currentInstallProtocolType} | grep -q trojan; then
        xtlsType=VLESS
    else
        xtlsType=Trojan

    fi

    echoContent skyBlue "\n功能 1/${totalProgress} : 前置切换为${xtlsType}"
    echoContent red "\n=============================================================="
    echoContent yellow "# 注意事项\n"
    echoContent yellow "会将前置替换为${xtlsType}"
    echoContent yellow "如果前置是Trojan，查看账号时则会出现两个Trojan协议的节点，有一个不可用xtls"
    echoContent yellow "再次执行可切换至上一次的前置\n"

    echoContent yellow "1.切换至${xtlsType}"
    echoContent red "=============================================================="
    read -r -p "请选择:" selectType
    if [[ "${selectType}" == "1" ]]; then

        if [[ "${xtlsType}" == "Trojan" ]]; then

            local VLESSConfig
            VLESSConfig=$(cat ${configPath}${frontingType}.json)
            VLESSConfig=${VLESSConfig//"id"/"password"}
            VLESSConfig=${VLESSConfig//VLESSTCP/TrojanTCPXTLS}
            VLESSConfig=${VLESSConfig//VLESS/Trojan}
            VLESSConfig=${VLESSConfig//"vless"/"trojan"}
            VLESSConfig=${VLESSConfig//"id"/"password"}

            echo "${VLESSConfig}" | jq . >${configPath}02_trojan_TCP_inbounds.json
            rm ${configPath}${frontingType}.json
        elif [[ "${xtlsType}" == "VLESS" ]]; then

            local VLESSConfig
            VLESSConfig=$(cat ${configPath}02_trojan_TCP_inbounds.json)
            VLESSConfig=${VLESSConfig//"password"/"id"}
            VLESSConfig=${VLESSConfig//TrojanTCPXTLS/VLESSTCP}
            VLESSConfig=${VLESSConfig//Trojan/VLESS}
            VLESSConfig=${VLESSConfig//"trojan"/"vless"}
            VLESSConfig=${VLESSConfig//"password"/"id"}

            echo "${VLESSConfig}" | jq . >${configPath}02_VLESS_TCP_inbounds.json
            rm ${configPath}02_trojan_TCP_inbounds.json
        fi
        reloadCore
    fi

    exit 0
}

# 移动上次配置文件至临时文件
movePreviousConfig() {
    if [[ -n "${configPath}" ]] && [[ -f "${configPath}02_VLESS_TCP_inbounds.json" ]]; then
        rm -rf ${configPath}../tmp/*
        mv ${configPath}* ${configPath}../tmp/
    fi

}

# 初始化Xray 配置文件
initXrayConfig() {
    echoContent skyBlue "\n进度 $2/${totalProgress} : 初始化Xray配置"
    echo
    local uuid=
    local addClientsStatus=
    if [[ -n "${currentUUID}" ]]; then
        read -r -p "读取到上次安装记录，是否使用上次安装时的UUID ？[y/n]:" historyUUIDStatus
        if [[ "${historyUUIDStatus}" == "y" ]]; then
            addClientsStatus=true
            uuid=${currentUUID}
            echoContent green "\n ---> 使用成功"
        fi
    fi

    if [[ -z "${uuid}" ]]; then
        echoContent yellow "请输入自定义UUID[需合法]，[回车]随机UUID"
        read -r -p 'UUID:' customUUID

        if [[ -n ${customUUID} ]]; then
            uuid=${customUUID}
        else
            uuid=$(/etc/v2ray-agent/xray/xray uuid)
        fi

    fi

    if [[ -z "${uuid}" ]]; then
        addClientsStatus=
        echoContent red "\n ---> uuid读取错误，重新生成"
        uuid=$(/etc/v2ray-agent/xray/xray uuid)
    fi

    echoContent yellow "\n ${uuid}"

    movePreviousConfig

    # log
    cat <<EOF >/etc/v2ray-agent/xray/conf/00_log.json
{
  "log": {
    "error": "/etc/v2ray-agent/xray/error.log",
    "loglevel": "warning"
  }
}
EOF

    # outbounds
    if [[ -n "${pingIPv6}" ]]; then
        cat <<EOF >/etc/v2ray-agent/xray/conf/10_ipv6_outbounds.json
{
    "outbounds": [
        {
          "protocol": "freedom",
          "settings": {},
          "tag": "direct"
        }
    ]
}
EOF

    else
        cat <<EOF >/etc/v2ray-agent/xray/conf/10_ipv4_outbounds.json
{
    "outbounds":[
        {
            "protocol":"freedom",
            "settings":{
                "domainStrategy":"UseIPv4"
            },
            "tag":"IPv4-out"
        },
        {
            "protocol":"freedom",
            "settings":{
                "domainStrategy":"UseIPv6"
            },
            "tag":"IPv6-out"
        },
        {
            "protocol":"blackhole",
            "tag":"blackhole-out"
        }
    ]
}
EOF
    fi

    # dns
    cat <<EOF >/etc/v2ray-agent/xray/conf/11_dns.json
{
    "dns": {
        "servers": [
          "localhost"
        ]
  }
}
EOF

    # VLESS_TCP_TLS/XTLS
    # 回落nginx
    local fallbacksList='{"dest":31300,"xver":0},{"alpn":"h2","dest":31302,"xver":0}'

    # trojan
    if echo "${selectCustomInstallType}" | grep -q 4 || [[ "$1" == "all" ]]; then
        fallbacksList='{"dest":31296,"xver":1},{"alpn":"h2","dest":31302,"xver":0}'
        getClients "${configPath}../tmp/04_trojan_TCP_inbounds.json" "${addClientsStatus}"

        cat <<EOF >/etc/v2ray-agent/xray/conf/04_trojan_TCP_inbounds.json
{
"inbounds":[
	{
	  "port": 31296,
	  "listen": "127.0.0.1",
	  "protocol": "trojan",
	  "tag":"trojanTCP",
	  "settings": {
		"clients": [
		  {
			"password": "${uuid}",
			"email": "default_Trojan_TCP"
		  }
		],
		"fallbacks":[
			{"dest":"31300"}
		]
	  },
	  "streamSettings": {
		"network": "tcp",
		"security": "none",
		"tcpSettings": {
			"acceptProxyProtocol": true
		}
	  }
	}
	]
}
EOF
        addClients "/etc/v2ray-agent/xray/conf/04_trojan_TCP_inbounds.json" "${addClientsStatus}"
    fi

    # VLESS_WS_TLS
    if echo "${selectCustomInstallType}" | grep -q 1 || [[ "$1" == "all" ]]; then
        fallbacksList=${fallbacksList}',{"path":"/'${customPath}'ws","dest":31297,"xver":1}'
        getClients "${configPath}../tmp/03_VLESS_WS_inbounds.json" "${addClientsStatus}"
        cat <<EOF >/etc/v2ray-agent/xray/conf/03_VLESS_WS_inbounds.json
{
"inbounds":[
    {
	  "port": 31297,
	  "listen": "127.0.0.1",
	  "protocol": "vless",
	  "tag":"VLESSWS",
	  "settings": {
		"clients": [
		  {
			"id": "${uuid}",
			"email": "default_VLESS_WS"
		  }
		],
		"decryption": "none"
	  },
	  "streamSettings": {
		"network": "ws",
		"security": "none",
		"wsSettings": {
		  "acceptProxyProtocol": true,
		  "path": "/${customPath}ws"
		}
	  }
	}
]
}
EOF
        addClients "/etc/v2ray-agent/xray/conf/03_VLESS_WS_inbounds.json" "${addClientsStatus}"
    fi

    # trojan_grpc
    if echo "${selectCustomInstallType}" | grep -q 2 || [[ "$1" == "all" ]]; then
        if ! echo "${selectCustomInstallType}" | grep -q 5 && [[ -n ${selectCustomInstallType} ]]; then
            fallbacksList=${fallbacksList//31302/31304}
        fi
        getClients "${configPath}../tmp/04_trojan_gRPC_inbounds.json" "${addClientsStatus}"
        cat <<EOF >/etc/v2ray-agent/xray/conf/04_trojan_gRPC_inbounds.json
{
    "inbounds": [
        {
            "port": 31304,
            "listen": "127.0.0.1",
            "protocol": "trojan",
            "tag": "trojangRPCTCP",
            "settings": {
                "clients": [
                    {
                        "password": "${uuid}",
                        "email": "default_Trojan_gRPC"
                    }
                ],
                "fallbacks": [
                    {
                        "dest": "31300"
                    }
                ]
            },
            "streamSettings": {
                "network": "grpc",
                "grpcSettings": {
                    "serviceName": "${customPath}trojangrpc"
                }
            }
        }
    ]
}
EOF
        addClients "/etc/v2ray-agent/xray/conf/04_trojan_gRPC_inbounds.json" "${addClientsStatus}"
    fi

    # VMess_WS
    if echo "${selectCustomInstallType}" | grep -q 3 || [[ "$1" == "all" ]]; then
        fallbacksList=${fallbacksList}',{"path":"/'${customPath}'vws","dest":31299,"xver":1}'
        getClients "${configPath}../tmp/05_VMess_WS_inbounds.json" "${addClientsStatus}"
        cat <<EOF >/etc/v2ray-agent/xray/conf/05_VMess_WS_inbounds.json
{
"inbounds":[
{
  "listen": "127.0.0.1",
  "port": 31299,
  "protocol": "vmess",
  "tag":"VMessWS",
  "settings": {
    "clients": [
      {
        "id": "${uuid}",
        "alterId": 0,
        "add": "${add}",
        "email": "default_VMess_WS"
      }
    ]
  },
  "streamSettings": {
    "network": "ws",
    "security": "none",
    "wsSettings": {
      "acceptProxyProtocol": true,
      "path": "/${customPath}vws"
    }
  }
}
]
}
EOF
        addClients "/etc/v2ray-agent/xray/conf/05_VMess_WS_inbounds.json" "${addClientsStatus}"
    fi

    if echo "${selectCustomInstallType}" | grep -q 5 || [[ "$1" == "all" ]]; then
        getClients "${configPath}../tmp/06_VLESS_gRPC_inbounds.json" "${addClientsStatus}"
        cat <<EOF >/etc/v2ray-agent/xray/conf/06_VLESS_gRPC_inbounds.json
{
    "inbounds":[
    {
        "port": 31301,
        "listen": "127.0.0.1",
        "protocol": "vless",
        "tag":"VLESSGRPC",
        "settings": {
            "clients": [
                {
                    "id": "${uuid}",
                    "add": "${add}",
                    "email": "default_VLESS_gRPC"
                }
            ],
            "decryption": "none"
        },
        "streamSettings": {
            "network": "grpc",
            "grpcSettings": {
                "serviceName": "${customPath}grpc"
            }
        }
    }
]
}
EOF
        addClients "/etc/v2ray-agent/xray/conf/06_VLESS_gRPC_inbounds.json" "${addClientsStatus}"
    fi

    # VLESS_TCP
    getClients "${configPath}../tmp/02_VLESS_TCP_inbounds.json" "${addClientsStatus}"
    local defaultPort=443
    if [[ -n "${customPort}" ]]; then
        defaultPort=${customPort}
    fi

    cat <<EOF >/etc/v2ray-agent/xray/conf/02_VLESS_TCP_inbounds.json
{
"inbounds":[
{
  "port": ${defaultPort},
  "protocol": "vless",
  "tag":"VLESSTCP",
  "settings": {
    "clients": [
     {
        "id": "${uuid}",
        "add":"${add}",
        "flow":"xtls-rprx-vision,none",
        "email": "default_VLESS_TCP/XTLS"
      }
    ],
    "decryption": "none",
    "fallbacks": [
        ${fallbacksList}
    ]
  },
  "streamSettings": {
    "network": "tcp",
    "security": "tls",
    "tlsSettings": {
      "minVersion": "1.2",
      "alpn": [
        "http/1.1",
        "h2"
      ],
      "certificates": [
        {
          "certificateFile": "/etc/v2ray-agent/tls/${domain}.crt",
          "keyFile": "/etc/v2ray-agent/tls/${domain}.key",
          "ocspStapling": 3600,
          "usage":"encipherment"
        }
      ]
    }
  }
}
]
}
EOF
    addClients "/etc/v2ray-agent/xray/conf/02_VLESS_TCP_inbounds.json" "${addClientsStatus}"
}

# 初始化Trojan-Go配置
initTrojanGoConfig() {

    echoContent skyBlue "\n进度 $1/${totalProgress} : 初始化Trojan配置"
    cat <<EOF >/etc/v2ray-agent/trojan/config_full.json
{
    "run_type": "server",
    "local_addr": "127.0.0.1",
    "local_port": 31296,
    "remote_addr": "127.0.0.1",
    "remote_port": 31300,
    "disable_http_check":true,
    "log_level":3,
    "log_file":"/etc/v2ray-agent/trojan/trojan.log",
    "password": [
        "${uuid}"
    ],
    "dns":[
        "localhost"
    ],
    "transport_plugin":{
        "enabled":true,
        "type":"plaintext"
    },
    "websocket": {
        "enabled": true,
        "path": "/${customPath}tws",
        "host": "${domain}",
        "add":"${add}"
    },
    "router": {
        "enabled": false
    }
}
EOF
}

# 自定义CDN IP
customCDNIP() {
    echoContent skyBlue "\n进度 $1/${totalProgress} : 添加cloudflare自选CNAME"
    echoContent red "\n=============================================================="
    echoContent yellow "# 注意事项"
    echoContent yellow "\n教程地址:"
    echoContent skyBlue "https://github.com/mack-a/v2ray-agent/blob/master/documents/optimize_V2Ray.md"
    echoContent red "\n如对Cloudflare优化不了解，请不要使用"
    echoContent yellow "\n 1.CNAME www.digitalocean.com"
    echoContent yellow " 2.CNAME who.int"
    echoContent yellow " 3.CNAME blog.hostmonit.com"

    echoContent skyBlue "----------------------------"
    read -r -p "请选择[回车不使用]:" selectCloudflareType
    case ${selectCloudflareType} in
    1)
        add="www.digitalocean.com"
        ;;
    2)
        add="who.int"
        ;;
    3)
        add="blog.hostmonit.com"
        ;;
    *)
        add="${domain}"
        echoContent yellow "\n ---> 不使用"
        ;;
    esac
}
# 通用
defaultBase64Code() {
    local type=$1
    local email=$2
    local id=$3

    port=${currentDefaultPort}

    local subAccount
    subAccount=$(echo "${email}" | awk -F "[_]" '{print $1}')_$(echo "${id}_currentHost" | md5sum | awk '{print $1}')
    if [[ "${type}" == "vlesstcp" ]]; then

        if [[ "${coreInstallType}" == "1" ]] && echo "${currentInstallProtocolType}" | grep -q 0; then
            echoContent yellow " ---> 通用格式(VLESS+TCP+TLS/xtls-rprx-vision)"
            echoContent green "    vless://${id}@${currentHost}:${currentDefaultPort}?encryption=none&security=tls&type=tcp&host=${currentHost}&headerType=none&sni=${currentHost}&flow=xtls-rprx-vision#${email}\n"

            echoContent yellow " ---> 格式化明文(VLESS+TCP+TLS/xtls-rprx-vision)"
            echoContent green "协议类型:VLESS，地址:${currentHost}，端口:${currentDefaultPort}，用户ID:${id}，安全:tls，传输方式:tcp，flow:xtls-rprx-vision，账户名:${email}\n"
            cat <<EOF >>"/etc/v2ray-agent/subscribe_tmp/${subAccount}"
vless://${id}@${currentHost}:${currentDefaultPort}?encryption=none&security=tls&type=tcp&host=${currentHost}&headerType=none&sni=${currentHost}&flow=xtls-rprx-vision#${email}
EOF
            echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS/xtls-rprx-vision)"
            echoContent green "    https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${id}%40${currentHost}%3A${currentDefaultPort}%3Fencryption%3Dnone%26security%3Dtls%26type%3Dtcp%26${currentHost}%3D${currentHost}%26headerType%3Dnone%26sni%3D${currentHost}%26flow%3Dxtls-rprx-vision%23${email}\n"

            echoContent skyBlue "----------------------------------------------------------------------------------"

        elif [[ "${coreInstallType}" == 2 ]]; then
            echoContent yellow " ---> 通用格式(VLESS+TCP+TLS)"
            echoContent green "    vless://${id}@${currentHost}:${currentDefaultPort}?security=tls&encryption=none&host=${currentHost}&headerType=none&type=tcp#${email}\n"

            echoContent yellow " ---> 格式化明文(VLESS+TCP+TLS)"
            echoContent green "    协议类型:VLESS，地址:${currentHost}，端口:${currentDefaultPort}，用户ID:${id}，安全:tls，传输方式:tcp，账户名:${email}\n"

            cat <<EOF >>"/etc/v2ray-agent/subscribe_tmp/${subAccount}"
vless://${id}@${currentHost}:${currentDefaultPort}?security=tls&encryption=none&host=${currentHost}&headerType=none&type=tcp#${email}
EOF
            echoContent yellow " ---> 二维码 VLESS(VLESS+TCP+TLS)"
            echoContent green "    https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3a%2f%2f${id}%40${currentHost}%3a${currentDefaultPort}%3fsecurity%3dtls%26encryption%3dnone%26host%3d${currentHost}%26headerType%3dnone%26type%3dtcp%23${email}\n"
        fi

    elif [[ "${type}" == "trojanTCPXTLS" ]]; then
        echoContent yellow " ---> 通用格式(Trojan+TCP+TLS/xtls-rprx-vision)"
        echoContent green "    trojan://${id}@${currentHost}:${currentDefaultPort}?encryption=none&security=xtls&type=tcp&host=${currentHost}&headerType=none&sni=${currentHost}&flow=xtls-rprx-vision#${email}\n"

        echoContent yellow " ---> 格式化明文(Trojan+TCP+TLS/xtls-rprx-vision)"
        echoContent green "协议类型:Trojan，地址:${currentHost}，端口:${currentDefaultPort}，用户ID:${id}，安全:xtls，传输方式:tcp，flow:xtls-rprx-vision，账户名:${email}\n"
        cat <<EOF >>"/etc/v2ray-agent/subscribe_tmp/${subAccount}"
trojan://${id}@${currentHost}:${currentDefaultPort}?encryption=none&security=xtls&type=tcp&host=${currentHost}&headerType=none&sni=${currentHost}&flow=xtls-rprx-vision#${email}
EOF
        echoContent yellow " ---> 二维码 Trojan(Trojan+TCP+TLS/xtls-rprx-vision)"
        echoContent green "    https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=trojan%3A%2F%2F${id}%40${currentHost}%3A${currentDefaultPort}%3Fencryption%3Dnone%26security%3Dxtls%26type%3Dtcp%26${currentHost}%3D${currentHost}%26headerType%3Dnone%26sni%3D${currentHost}%26flow%3Dxtls-rprx-vision%23${email}\n"

    elif [[ "${type}" == "vmessws" ]]; then
        qrCodeBase64Default=$(echo -n "{\"port\":${currentDefaultPort},\"ps\":\"${email}\",\"tls\":\"tls\",\"id\":\"${id}\",\"aid\":0,\"v\":2,\"host\":\"${currentHost}\",\"type\":\"none\",\"path\":\"/${currentPath}vws\",\"net\":\"ws\",\"add\":\"${currentAdd}\",\"allowInsecure\":0,\"method\":\"none\",\"peer\":\"${currentHost}\",\"sni\":\"${currentHost}\"}" | base64 -w 0)
        qrCodeBase64Default="${qrCodeBase64Default// /}"

        echoContent yellow " ---> 通用json(VMess+WS+TLS)"
        echoContent green "    {\"port\":${currentDefaultPort},\"ps\":\"${email}\",\"tls\":\"tls\",\"id\":\"${id}\",\"aid\":0,\"v\":2,\"host\":\"${currentHost}\",\"type\":\"none\",\"path\":\"/${currentPath}vws\",\"net\":\"ws\",\"add\":\"${currentAdd}\",\"allowInsecure\":0,\"method\":\"none\",\"peer\":\"${currentHost}\",\"sni\":\"${currentHost}\"}\n"
        echoContent yellow " ---> 通用vmess(VMess+WS+TLS)链接"
        echoContent green "    vmess://${qrCodeBase64Default}\n"
        echoContent yellow " ---> 二维码 vmess(VMess+WS+TLS)"

        cat <<EOF >>"/etc/v2ray-agent/subscribe_tmp/${subAccount}"
vmess://${qrCodeBase64Default}
EOF
        echoContent green "    https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vmess://${qrCodeBase64Default}\n"

    elif [[ "${type}" == "vlessws" ]]; then

        echoContent yellow " ---> 通用格式(VLESS+WS+TLS)"
        echoContent green "    vless://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&security=tls&type=ws&host=${currentHost}&sni=${currentHost}&path=/${currentPath}ws#${email}\n"

        echoContent yellow " ---> 格式化明文(VLESS+WS+TLS)"
        echoContent green "    协议类型:VLESS，地址:${currentAdd}，伪装域名/SNI:${currentHost}，端口:${currentDefaultPort}，用户ID:${id}，安全:tls，传输方式:ws，路径:/${currentPath}ws，账户名:${email}\n"

        cat <<EOF >>"/etc/v2ray-agent/subscribe_tmp/${subAccount}"
vless://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&security=tls&type=ws&host=${currentHost}&sni=${currentHost}&path=/${currentPath}ws#${email}
EOF

        echoContent yellow " ---> 二维码 VLESS(VLESS+WS+TLS)"
        echoContent green "    https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${id}%40${currentAdd}%3A${currentDefaultPort}%3Fencryption%3Dnone%26security%3Dtls%26type%3Dws%26host%3D${currentHost}%26sni%3D${currentHost}%26path%3D%252f${currentPath}ws%23${email}"

    elif [[ "${type}" == "vlessgrpc" ]]; then

        echoContent yellow " ---> 通用格式(VLESS+gRPC+TLS)"
        echoContent green "    vless://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&security=tls&type=grpc&host=${currentHost}&path=${currentPath}grpc&serviceName=${currentPath}grpc&alpn=h2&sni=${currentHost}#${email}\n"

        echoContent yellow " ---> 格式化明文(VLESS+gRPC+TLS)"
        echoContent green "    协议类型:VLESS，地址:${currentAdd}，伪装域名/SNI:${currentHost}，端口:${currentDefaultPort}，用户ID:${id}，安全:tls，传输方式:gRPC，alpn:h2，serviceName:${currentPath}grpc，账户名:${email}\n"

        cat <<EOF >>"/etc/v2ray-agent/subscribe_tmp/${subAccount}"
vless://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&security=tls&type=grpc&host=${currentHost}&path=${currentPath}grpc&serviceName=${currentPath}grpc&alpn=h2&sni=${currentHost}#${email}
EOF
        echoContent yellow " ---> 二维码 VLESS(VLESS+gRPC+TLS)"
        echoContent green "    https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=vless%3A%2F%2F${id}%40${currentAdd}%3A${currentDefaultPort}%3Fencryption%3Dnone%26security%3Dtls%26type%3Dgrpc%26host%3D${currentHost}%26serviceName%3D${currentPath}grpc%26path%3D${currentPath}grpc%26sni%3D${currentHost}%26alpn%3Dh2%23${email}"

    elif [[ "${type}" == "trojan" ]]; then
        # URLEncode
        echoContent yellow " ---> Trojan(TLS)"
        echoContent green "    trojan://${id}@${currentHost}:${currentDefaultPort}?peer=${currentHost}&sni=${currentHost}&alpn=http/1.1#${currentHost}_Trojan\n"

        cat <<EOF >>"/etc/v2ray-agent/subscribe_tmp/${subAccount}"
trojan://${id}@${currentHost}:${currentDefaultPort}?peer=${currentHost}&sni=${currentHost}&alpn=http/1.1#${email}_Trojan
EOF
        echoContent yellow " ---> 二维码 Trojan(TLS)"
        echoContent green "    https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=trojan%3a%2f%2f${id}%40${currentHost}%3a${port}%3fpeer%3d${currentHost}%26sni%3d${currentHost}%26alpn%3Dhttp/1.1%23${email}\n"

    elif [[ "${type}" == "trojangrpc" ]]; then
        # URLEncode

        echoContent yellow " ---> Trojan gRPC(TLS)"
        echoContent green "    trojan://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&peer=${currentHost}&security=tls&type=grpc&sni=${currentHost}&alpn=h2&path=${currentPath}trojangrpc&serviceName=${currentPath}trojangrpc#${email}\n"
        cat <<EOF >>"/etc/v2ray-agent/subscribe_tmp/${subAccount}"
trojan://${id}@${currentAdd}:${currentDefaultPort}?encryption=none&peer=${currentHost}&security=tls&type=grpc&sni=${currentHost}&alpn=h2&path=${currentPath}trojangrpc&serviceName=${currentPath}trojangrpc#${email}
EOF
        echoContent yellow " ---> 二维码 Trojan gRPC(TLS)"
        echoContent green "    https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=trojan%3a%2f%2f${id}%40${currentAdd}%3a${currentDefaultPort}%3Fencryption%3Dnone%26security%3Dtls%26peer%3d${currentHost}%26type%3Dgrpc%26sni%3d${currentHost}%26path%3D${currentPath}trojangrpc%26alpn%3Dh2%26serviceName%3D${currentPath}trojangrpc%23${email}\n"

    elif [[ "${type}" == "hysteria" ]]; then
        echoContent yellow " ---> Hysteria(TLS)"
        echoContent green "    hysteria://${currentHost}:${hysteriaPort}?protocol=${hysteriaProtocol}&auth=${id}&peer=${currentHost}&insecure=0&alpn=h3&upmbps=${hysteriaClientUploadSpeed}&downmbps=${hysteriaClientDownloadSpeed}#${email}\n"
        cat <<EOF >>"/etc/v2ray-agent/subscribe_tmp/${subAccount}"
hysteria://${currentHost}:${hysteriaPort}?protocol=${hysteriaProtocol}&auth=${id}&peer=${currentHost}&insecure=0&alpn=h3&upmbps=${hysteriaClientUploadSpeed}&downmbps=${hysteriaClientDownloadSpeed}#${email}
EOF
        echoContent yellow " ---> 二维码 Hysteria(TLS)"
        echoContent green "    https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=hysteria%3A%2F%2F${currentHost}%3A${hysteriaPort}%3Fprotocol%3D${hysteriaProtocol}%26auth%3D${id}%26peer%3D${currentHost}%26insecure%3D0%26alpn%3Dh3%26upmbps%3D${hysteriaClientUploadSpeed}%26downmbps%3D${hysteriaClientDownloadSpeed}%23${email}\n"
    fi

}

# 账号
showAccounts() {
    readInstallType
    readInstallProtocolType
    readConfigHostPathUUID
    readHysteriaConfig
    echoContent skyBlue "\n进度 $1/${totalProgress} : 账号"
    local show
    # VLESS TCP
    if [[ -n "${configPath}" ]]; then
        show=1
        if echo "${currentInstallProtocolType}" | grep -q trojan; then
            echoContent skyBlue "===================== Trojan TCP TLS/XTLS-vision ======================\n"
            jq .inbounds[0].settings.clients ${configPath}02_trojan_TCP_inbounds.json | jq -c '.[]' | while read -r user; do
                local email=
                email=$(echo "${user}" | jq -r .email)
                echoContent skyBlue "\n ---> 账号:${email}"
                defaultBase64Code trojanTCPXTLS "${email}" "$(echo "${user}" | jq -r .password)"
            done

        else
            echoContent skyBlue "===================== VLESS TCP TLS/XTLS-vision ======================\n"
            echoContent red "\n --->如客户端不支持vision会使用默认的VLESS TCP TLS，vision可以有效规避端口封禁，非vision则没有此功能，请确认后再使用"
            jq .inbounds[0].settings.clients ${configPath}02_VLESS_TCP_inbounds.json | jq -c '.[]' | while read -r user; do
                local email=
                email=$(echo "${user}" | jq -r .email)

                echoContent skyBlue "\n ---> 账号:${email}"
                echo
                defaultBase64Code vlesstcp "${email}" "$(echo "${user}" | jq -r .id)"
            done
        fi

        # VLESS WS
        if echo ${currentInstallProtocolType} | grep -q 1; then
            echoContent skyBlue "\n================================ VLESS WS TLS CDN ================================\n"

            jq .inbounds[0].settings.clients ${configPath}03_VLESS_WS_inbounds.json | jq -c '.[]' | while read -r user; do
                local email=
                email=$(echo "${user}" | jq -r .email)

                echoContent skyBlue "\n ---> 账号:${email}"
                echo
                local path="${currentPath}ws"
                #	if [[ ${coreInstallType} == "1" ]]; then
                #		echoContent yellow "Xray的0-RTT path后面会有，不兼容以v2ray为核心的客户端，请手动删除后使用\n"
                #		path="${currentPath}ws"
                #	fi
                defaultBase64Code vlessws "${email}" "$(echo "${user}" | jq -r .id)"
            done
        fi

        # VMess WS
        if echo ${currentInstallProtocolType} | grep -q 3; then
            echoContent skyBlue "\n================================ VMess WS TLS CDN ================================\n"
            local path="${currentPath}vws"
            if [[ ${coreInstallType} == "1" ]]; then
                path="${currentPath}vws"
            fi
            jq .inbounds[0].settings.clients ${configPath}05_VMess_WS_inbounds.json | jq -c '.[]' | while read -r user; do
                local email=
                email=$(echo "${user}" | jq -r .email)

                echoContent skyBlue "\n ---> 账号:${email}"
                echo
                defaultBase64Code vmessws "${email}" "$(echo "${user}" | jq -r .id)"
            done
        fi

        # VLESS grpc
        if echo ${currentInstallProtocolType} | grep -q 5; then
            echoContent skyBlue "\n=============================== VLESS gRPC TLS CDN ===============================\n"
            echoContent red "\n --->gRPC处于测试阶段，可能对你使用的客户端不兼容，如不能使用请忽略"
            #			local serviceName
            #			serviceName=$(jq -r .inbounds[0].streamSettings.grpcSettings.serviceName ${configPath}06_VLESS_gRPC_inbounds.json)
            jq .inbounds[0].settings.clients ${configPath}06_VLESS_gRPC_inbounds.json | jq -c '.[]' | while read -r user; do

                local email=
                email=$(echo "${user}" | jq -r .email)

                echoContent skyBlue "\n ---> 账号:${email}"
                echo
                defaultBase64Code vlessgrpc "${email}" "$(echo "${user}" | jq -r .id)"
            done
        fi
    fi

    # trojan tcp
    if echo ${currentInstallProtocolType} | grep -q 4; then
        echoContent skyBlue "\n==================================  Trojan TLS  ==================================\n"
        jq .inbounds[0].settings.clients ${configPath}04_trojan_TCP_inbounds.json | jq -c '.[]' | while read -r user; do
            local email=
            email=$(echo "${user}" | jq -r .email)
            echoContent skyBlue "\n ---> 账号:${email}"

            defaultBase64Code trojan "${email}" "$(echo "${user}" | jq -r .password)"
        done
    fi

    if echo ${currentInstallProtocolType} | grep -q 2; then
        echoContent skyBlue "\n================================  Trojan gRPC TLS  ================================\n"
        echoContent red "\n --->gRPC处于测试阶段，可能对你使用的客户端不兼容，如不能使用请忽略"
        jq .inbounds[0].settings.clients ${configPath}04_trojan_gRPC_inbounds.json | jq -c '.[]' | while read -r user; do
            local email=
            email=$(echo "${user}" | jq -r .email)

            echoContent skyBlue "\n ---> 账号:${email}"
            echo
            defaultBase64Code trojangrpc "${email}" "$(echo "${user}" | jq -r .password)"
        done
    fi
    if echo ${currentInstallProtocolType} | grep -q 6; then
        echoContent skyBlue "\n================================  Hysteria TLS  ================================\n"
        echoContent red "\n --->Hysteria速度依赖与本地的网络环境，如果被QoS使用体验会非常差。IDC也有可能认为是攻击，请谨慎使用"

        jq .auth.config ${hysteriaConfigPath}config.json | jq -r '.[]' | while read -r user; do
            local defaultUser=
            local uuidType=
            uuidType=".id"

            if [[ "${frontingType}" == "02_trojan_TCP_inbounds" ]]; then
                uuidType=".password"
            fi

            defaultUser=$(jq '.inbounds[0].settings.clients[]|select('${uuidType}'=="'"${user}"'")' ${configPath}${frontingType}.json)
            local email=
            email=$(echo "${defaultUser}" | jq -r .email)

            if [[ -n ${defaultUser} ]]; then
                echoContent skyBlue "\n ---> 账号:${email}"
                echo
                defaultBase64Code hysteria "${email}" "${user}"
            fi

        done

    fi

    if [[ -z ${show} ]]; then
        echoContent red " ---> 未安装"
    fi
}
# 移除nginx302配置
removeNginx302() {
    local count=0
    grep -n "return 302" <"/etc/nginx/conf.d/alone.conf" | while read -r line; do

        if ! echo "${line}" | grep -q "request_uri"; then
            local removeIndex=
            removeIndex=$(echo "${line}" | awk -F "[:]" '{print $1}')
            removeIndex=$((removeIndex + count))
            sed -i "${removeIndex}d" /etc/nginx/conf.d/alone.conf
            count=$((count - 1))
        fi
    done
}

# 检查302是否成功
checkNginx302() {
    local domain302Status=
    domain302Status=$(curl -s "https://${currentHost}")
    if echo "${domain302Status}" | grep -q "302"; then
        local domain302Result=
        domain302Result=$(curl -L -s "https://${currentHost}")
        if [[ -n "${domain302Result}" ]]; then
            echoContent green " ---> 302重定向设置成功"
            exit 0
        fi
    fi
    echoContent red " ---> 302重定向设置失败，请仔细检查是否和示例相同"
    backupNginxConfig restoreBackup
}

# 备份恢复nginx文件
backupNginxConfig() {
    if [[ "$1" == "backup" ]]; then
        cp /etc/nginx/conf.d/alone.conf /etc/v2ray-agent/alone_backup.conf
        echoContent green " ---> nginx配置文件备份成功"
    fi

    if [[ "$1" == "restoreBackup" ]] && [[ -f "/etc/v2ray-agent/alone_backup.conf" ]]; then
        cp /etc/v2ray-agent/alone_backup.conf /etc/nginx/conf.d/alone.conf
        echoContent green " ---> nginx配置文件恢复备份成功"
        rm /etc/v2ray-agent/alone_backup.conf
    fi

}
# 添加302配置
addNginx302() {
    #	local line302Result=
    #	line302Result=$(| tail -n 1)
    local count=1
    grep -n "Strict-Transport-Security" <"/etc/nginx/conf.d/alone.conf" | while read -r line; do
        if [[ -n "${line}" ]]; then
            local insertIndex=
            insertIndex="$(echo "${line}" | awk -F "[:]" '{print $1}')"
            insertIndex=$((insertIndex + count))
            sed "${insertIndex}i return 302 '$1';" /etc/nginx/conf.d/alone.conf >/etc/nginx/conf.d/tmpfile && mv /etc/nginx/conf.d/tmpfile /etc/nginx/conf.d/alone.conf
            count=$((count + 1))
        else
            echoContent red " ---> 302添加失败"
            backupNginxConfig restoreBackup
        fi

    done
}

# 更新伪装站
updateNginxBlog() {
    echoContent skyBlue "\n进度 $1/${totalProgress} : 更换伪装站点"
    echoContent red "=============================================================="
    echoContent yellow "# 如需自定义，请手动复制模版文件到 /usr/share/nginx/html \n"
    echoContent yellow "1.新手引导"
    echoContent yellow "2.游戏网站"
    echoContent yellow "3.个人博客01"
    echoContent yellow "4.企业站"
    echoContent yellow "5.解锁加密的音乐文件模版[https://github.com/ix64/unlock-music]"
    echoContent yellow "6.mikutap[https://github.com/HFIProgramming/mikutap]"
    echoContent yellow "7.企业站02"
    echoContent yellow "8.个人博客02"
    echoContent yellow "9.404自动跳转baidu"
    echoContent yellow "10.302重定向网站"
    echoContent red "=============================================================="
    read -r -p "请选择:" selectInstallNginxBlogType

    if [[ "${selectInstallNginxBlogType}" == "10" ]]; then
        echoContent red "\n=============================================================="
        echoContent yellow "重定向的优先级更高，配置302之后如果更改伪装站点，根路由下伪装站点将不起作用"
        echoContent yellow "如想要伪装站点实现作用需删除302重定向配置\n"
        echoContent yellow "1.添加"
        echoContent yellow "2.删除"
        echoContent red "=============================================================="
        read -r -p "请选择:" redirectStatus

        if [[ "${redirectStatus}" == "1" ]]; then
            backupNginxConfig backup
            read -r -p "请输入要重定向的域名,例如 https://www.baidu.com:" redirectDomain
            removeNginx302
            addNginx302 "${redirectDomain}"
            handleNginx stop
            handleNginx start
            if [[ -z $(pgrep -f nginx) ]]; then
                backupNginxConfig restoreBackup
                handleNginx start
                exit 0
            fi
            checkNginx302
            exit 0
        fi
        if [[ "${redirectStatus}" == "2" ]]; then
            removeNginx302
            echoContent green " ---> 移除302重定向成功"
            exit 0
        fi
    fi
    if [[ "${selectInstallNginxBlogType}" =~ ^[1-9]$ ]]; then
        rm -rf /usr/share/nginx/*
        if wget --help | grep -q show-progress; then
            wget -c -q --show-progress -P /usr/share/nginx "https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${selectInstallNginxBlogType}.zip" >/dev/null
        else
            wget -c -P /usr/share/nginx "https://raw.githubusercontent.com/mack-a/v2ray-agent/master/fodder/blog/unable/html${selectInstallNginxBlogType}.zip" >/dev/null
        fi

        unzip -o "/usr/share/nginx/html${selectInstallNginxBlogType}.zip" -d /usr/share/nginx/html >/dev/null
        rm -f "/usr/share/nginx/html${selectInstallNginxBlogType}.zip*"
        echoContent green " ---> 更换伪站成功"
    else
        echoContent red " ---> 选择错误，请重新选择"
        updateNginxBlog
    fi
}

# 添加新端口
addCorePort() {
    readHysteriaConfig
    echoContent skyBlue "\n功能 1/${totalProgress} : 添加新端口"
    echoContent red "\n=============================================================="
    echoContent yellow "# 注意事项\n"
    echoContent yellow "支持批量添加"
    echoContent yellow "不影响默认端口的使用"
    echoContent yellow "查看账号时，只会展示默认端口的账号"
    echoContent yellow "不允许有特殊字符，注意逗号的格式"
    echoContent yellow "如已安装hysteria，会同时安装hysteria新端口"
    echoContent yellow "录入示例:2053,2083,2087\n"

    echoContent yellow "1.添加端口"
    echoContent yellow "2.删除端口"
    echoContent red "=============================================================="
    read -r -p "请选择:" selectNewPortType
    if [[ "${selectNewPortType}" == "1" ]]; then
        read -r -p "请输入端口号:" newPort
        read -r -p "请输入默认的端口号，同时会更改订阅端口以及节点端口，[回车]默认443:" defaultPort

        if [[ -n "${defaultPort}" ]]; then
            rm -rf "$(find ${configPath}* | grep "default")"
        fi

        if [[ -n "${newPort}" ]]; then

            while read -r port; do
                rm -rf "$(find ${configPath}* | grep "${port}")"

                local fileName=
                local hysteriaFileName=
                if [[ -n "${defaultPort}" && "${port}" == "${defaultPort}" ]]; then
                    fileName="${configPath}02_dokodemodoor_inbounds_${port}_default.json"
                else
                    fileName="${configPath}02_dokodemodoor_inbounds_${port}.json"
                fi

                if [[ -n ${hysteriaPort} ]]; then
                    hysteriaFileName="${configPath}02_dokodemodoor_inbounds_hysteria_${port}.json"
                fi

                # 开放端口
                allowPort "${port}"
                allowPort "${port}" "udp"

                local settingsPort=443
                if [[ -n "${customPort}" ]]; then
                    settingsPort=${customPort}
                fi

                if [[ -n ${hysteriaFileName} ]]; then
                    cat <<EOF >"${hysteriaFileName}"
{
  "inbounds": [
	{
	  "listen": "0.0.0.0",
	  "port": ${port},
	  "protocol": "dokodemo-door",
	  "settings": {
		"address": "127.0.0.1",
		"port": ${hysteriaPort},
		"network": "udp",
		"followRedirect": false
	  },
	  "tag": "dokodemo-door-newPort-hysteria-${port}"
	}
  ]
}
EOF
                fi
                cat <<EOF >"${fileName}"
{
  "inbounds": [
	{
	  "listen": "0.0.0.0",
	  "port": ${port},
	  "protocol": "dokodemo-door",
	  "settings": {
		"address": "127.0.0.1",
		"port": ${settingsPort},
		"network": "tcp",
		"followRedirect": false
	  },
	  "tag": "dokodemo-door-newPort-${port}"
	}
  ]
}
EOF
            done < <(echo "${newPort}" | tr ',' '\n')

            echoContent green " ---> 添加成功"
            reloadCore
            addCorePort
        fi
    elif [[ "${selectNewPortType}" == "2" ]]; then

        find ${configPath} -name "*dokodemodoor*" | awk -F "[c][o][n][f][/]" '{print ""NR""":"$2}'
        read -r -p "请输入要删除的端口编号:" portIndex
        local dokoConfig
        dokoConfig=$(find ${configPath} -name "*dokodemodoor*" | awk -F "[c][o][n][f][/]" '{print ""NR""":"$2}' | grep "${portIndex}:")
        if [[ -n "${dokoConfig}" ]]; then
            rm "${configPath}/$(echo "${dokoConfig}" | awk -F "[:]" '{print $2}')"
            reloadCore
            addCorePort
        else
            echoContent yellow "\n ---> 编号输入错误，请重新选择"
            addCorePort
        fi
    fi
}

# 卸载脚本
unInstall() {
    read -r -p "是否确认卸载安装内容？[y/n]:" unInstallStatus
    if [[ "${unInstallStatus}" != "y" ]]; then
        echoContent green " ---> 放弃卸载"
        menu
        exit 0
    fi

    handleNginx stop
    if [[ -z $(pgrep -f "nginx") ]]; then
        echoContent green " ---> 停止Nginx成功"
    fi

    if [[ "${coreInstallType}" == "1" ]]; then
        handleXray stop
        rm -rf /etc/systemd/system/xray.service
        echoContent green " ---> 删除Xray开机自启完成"

    elif [[ "${coreInstallType}" == "2" ]]; then

        handleV2Ray stop
        rm -rf /etc/systemd/system/v2ray.service
        echoContent green " ---> 删除V2Ray开机自启完成"

    fi

    if [[ -z "${hysteriaConfigPath}" ]]; then
        handleHysteria stop
        rm -rf /etc/systemd/system/hysteria.service
        echoContent green " ---> 删除Hysteria开机自启完成"
    fi

    if [[ -f "/root/.acme.sh/acme.sh.env" ]] && grep -q 'acme.sh.env' </root/.bashrc; then
        sed -i 's/. "\/root\/.acme.sh\/acme.sh.env"//g' "$(grep '. "/root/.acme.sh/acme.sh.env"' -rl /root/.bashrc)"
    fi
    rm -rf /root/.acme.sh
    echoContent green " ---> 删除acme.sh完成"

    rm -rf /tmp/v2ray-agent-tls/*
    if [[ -d "/etc/v2ray-agent/tls" ]] && [[ -n $(find /etc/v2ray-agent/tls/ -name "*.key") ]] && [[ -n $(find /etc/v2ray-agent/tls/ -name "*.crt") ]]; then
        mv /etc/v2ray-agent/tls /tmp/v2ray-agent-tls
        if [[ -n $(find /tmp/v2ray-agent-tls -name '*.key') ]]; then
            echoContent yellow " ---> 备份证书成功，请注意留存。[/tmp/v2ray-agent-tls]"
        fi
    fi

    rm -rf /etc/v2ray-agent
    rm -rf ${nginxConfigPath}alone.conf

    if [[ -d "/usr/share/nginx/html" && -f "/usr/share/nginx/html/check" ]]; then
        rm -rf /usr/share/nginx/html
        echoContent green " ---> 删除伪装网站完成"
    fi

    rm -rf /usr/bin/vasma
    rm -rf /usr/sbin/vasma
    echoContent green " ---> 卸载快捷方式完成"
    echoContent green " ---> 卸载v2ray-agent脚本完成"
}

#updateGeoSite

# 修改V2Ray CDN节点
updateV2RayCDN() {

    # todo 重构此方法
    echoContent skyBlue "\n进度 $1/${totalProgress} : 修改CDN节点"

    if [[ -n "${currentAdd}" ]]; then
        echoContent red "=============================================================="
        echoContent yellow "1.CNAME www.digitalocean.com"
        echoContent yellow "2.CNAME who.int"
        echoContent yellow "3.CNAME blog.hostmonit.com"
        echoContent yellow "4.手动输入"
        echoContent red "=============================================================="
        read -r -p "请选择:" selectCDNType
        case ${selectCDNType} in
        1)
            setDomain="www.digitalocean.com"
            ;;
        2)
            setDomain="who.int"
            ;;
        3)
            setDomain="blog.hostmonit.com"
            ;;
        4)
            read -r -p "请输入想要自定义CDN IP或者域名:" setDomain
            ;;
        esac

        if [[ -n ${setDomain} ]]; then
            if [[ -n "${currentAdd}" ]]; then
                sed -i "s/\"${currentAdd}\"/\"${setDomain}\"/g" "$(grep "${currentAdd}" -rl ${configPath}${frontingType}.json)"
            fi
            if [[ $(jq -r .inbounds[0].settings.clients[0].add ${configPath}${frontingType}.json) == "${setDomain}" ]]; then
                echoContent green " ---> CDN修改成功"
                reloadCore
            else
                echoContent red " ---> 修改CDN失败"
            fi
        fi
    else
        echoContent red " ---> 未安装可用类型"
    fi
}

# manageUser 用户管理
manageUser() {
    echoContent skyBlue "\n进度 $1/${totalProgress} : 多用户管理"
    echoContent skyBlue "-----------------------------------------------------"
    echoContent yellow "1.添加用户"
    echoContent yellow "2.删除用户"
    echoContent skyBlue "-----------------------------------------------------"
    read -r -p "请选择:" manageUserType
    if [[ "${manageUserType}" == "1" ]]; then
        addUser
    elif [[ "${manageUserType}" == "2" ]]; then
        removeUser
    else
        echoContent red " ---> 选择错误"
    fi
}

# 自定义uuid
customUUID() {
    #	read -r -p "是否自定义UUID ？[y/n]:" customUUIDStatus
    #	echo
    #	if [[ "${customUUIDStatus}" == "y" ]]; then
    read -r -p "请输入合法的UUID，[回车]随机UUID:" currentCustomUUID
    echo
    if [[ -z "${currentCustomUUID}" ]]; then
        # echoContent red " ---> UUID不可为空"
        currentCustomUUID=$(${ctlPath} uuid)
        echoContent yellow "uuid:${currentCustomUUID}\n"

    else
        jq -r -c '.inbounds[0].settings.clients[].id' ${configPath}${frontingType}.json | while read -r line; do
            if [[ "${line}" == "${currentCustomUUID}" ]]; then
                echo >/tmp/v2ray-agent
            fi
        done
        if [[ -f "/tmp/v2ray-agent" && -n $(cat /tmp/v2ray-agent) ]]; then
            echoContent red " ---> UUID不可重复"
            rm /tmp/v2ray-agent
            exit 0
        fi
    fi
    #	fi
}

# 自定义email
customUserEmail() {
    #	read -r -p "是否自定义email ？[y/n]:" customEmailStatus
    #	echo
    #	if [[ "${customEmailStatus}" == "y" ]]; then
    read -r -p "请输入合法的email，[回车]随机email:" currentCustomEmail
    echo
    if [[ -z "${currentCustomEmail}" ]]; then
        currentCustomEmail="${currentCustomUUID}"
        echoContent yellow "email: ${currentCustomEmail}\n"
    else
        jq -r -c '.inbounds[0].settings.clients[].email' ${configPath}${frontingType}.json | while read -r line; do
            if [[ "${line}" == "${currentCustomEmail}" ]]; then
                echo >/tmp/v2ray-agent
            fi
        done
        if [[ -f "/tmp/v2ray-agent" && -n $(cat /tmp/v2ray-agent) ]]; then
            echoContent red " ---> email不可重复"
            rm /tmp/v2ray-agent
            exit 0
        fi
    fi
    #	fi
}

# 添加用户
addUser() {

    echoContent yellow "添加新用户后，需要重新查看订阅"
    read -r -p "请输入要添加的用户数量:" userNum
    echo
    if [[ -z ${userNum} || ${userNum} -le 0 ]]; then
        echoContent red " ---> 输入有误，请重新输入"
        exit 0
    fi

    # 生成用户
    if [[ "${userNum}" == "1" ]]; then
        customUUID
        customUserEmail
    fi

    while [[ ${userNum} -gt 0 ]]; do
        local users=
        ((userNum--)) || true
        if [[ -n "${currentCustomUUID}" ]]; then
            uuid=${currentCustomUUID}
        else
            uuid=$(${ctlPath} uuid)
        fi

        if [[ -n "${currentCustomEmail}" ]]; then
            email=${currentCustomEmail}_${uuid}
        else
            email=${currentHost}_${uuid}
        fi

        #	兼容v2ray-core
        users="{\"id\":\"${uuid}\",\"flow\":\"xtls-rprx-vision,none\",\"email\":\"${email}\",\"alterId\":0}"

        if [[ "${coreInstallType}" == "2" ]]; then
            users="{\"id\":\"${uuid}\",\"email\":\"${email}\",\"alterId\":0}"
        fi

        if echo ${currentInstallProtocolType} | grep -q 0; then
            local vlessUsers="${users//\,\"alterId\":0/}"
            vlessUsers="${users//${email}/${email}_VLESS_TCP}"
            local vlessTcpResult
            vlessTcpResult=$(jq -r ".inbounds[0].settings.clients += [${vlessUsers}]" ${configPath}${frontingType}.json)
            echo "${vlessTcpResult}" | jq . >${configPath}${frontingType}.json
        fi

        if echo ${currentInstallProtocolType} | grep -q trojan; then
            local trojanXTLSUsers="${users//\,\"alterId\":0/}"
            trojanXTLSUsers="${trojanXTLSUsers//${email}/${email}_Trojan_TCP}"
            trojanXTLSUsers=${trojanXTLSUsers//"id"/"password"}

            local trojanXTLSResult
            trojanXTLSResult=$(jq -r ".inbounds[0].settings.clients += [${trojanXTLSUsers}]" ${configPath}${frontingType}.json)
            echo "${trojanXTLSResult}" | jq . >${configPath}${frontingType}.json
        fi

        if echo ${currentInstallProtocolType} | grep -q 1; then
            local vlessUsers="${users//\,\"alterId\":0/}"
            vlessUsers="${vlessUsers//${email}/${email}_VLESS_TCP}"
            vlessUsers="${vlessUsers//\"flow\":\"xtls-rprx-vision,none\"\,/}"
            local vlessWsResult
            vlessWsResult=$(jq -r ".inbounds[0].settings.clients += [${vlessUsers}]" ${configPath}03_VLESS_WS_inbounds.json)
            echo "${vlessWsResult}" | jq . >${configPath}03_VLESS_WS_inbounds.json
        fi

        if echo ${currentInstallProtocolType} | grep -q 2; then
            local trojangRPCUsers="${users//\"flow\":\"xtls-rprx-vision,none\"\,/}"
            trojangRPCUsers="${trojangRPCUsers//${email}/${email}_Trojan_gRPC}"
            trojangRPCUsers="${trojangRPCUsers//\,\"alterId\":0/}"
            trojangRPCUsers=${trojangRPCUsers//"id"/"password"}

            local trojangRPCResult
            trojangRPCResult=$(jq -r ".inbounds[0].settings.clients += [${trojangRPCUsers}]" ${configPath}04_trojan_gRPC_inbounds.json)
            echo "${trojangRPCResult}" | jq . >${configPath}04_trojan_gRPC_inbounds.json
        fi

        if echo ${currentInstallProtocolType} | grep -q 3; then
            local vmessUsers="${users//\"flow\":\"xtls-rprx-vision,none\"\,/}"
            vmessUsers="${vmessUsers//${email}/${email}_VMess_TCP}"
            local vmessWsResult
            vmessWsResult=$(jq -r ".inbounds[0].settings.clients += [${vmessUsers}]" ${configPath}05_VMess_WS_inbounds.json)
            echo "${vmessWsResult}" | jq . >${configPath}05_VMess_WS_inbounds.json
        fi

        if echo ${currentInstallProtocolType} | grep -q 5; then
            local vlessGRPCUsers="${users//\"flow\":\"xtls-rprx-vision,none\"\,/}"
            vlessGRPCUsers="${vlessGRPCUsers//\,\"alterId\":0/}"
            vlessGRPCUsers="${vlessGRPCUsers//${email}/${email}_VLESS_gRPC}"
            local vlessGRPCResult
            vlessGRPCResult=$(jq -r ".inbounds[0].settings.clients += [${vlessGRPCUsers}]" ${configPath}06_VLESS_gRPC_inbounds.json)
            echo "${vlessGRPCResult}" | jq . >${configPath}06_VLESS_gRPC_inbounds.json
        fi

        if echo ${currentInstallProtocolType} | grep -q 4; then
            local trojanUsers="${users//\"flow\":\"xtls-rprx-vision,none\"\,/}"
            trojanUsers="${trojanUsers//id/password}"
            trojanUsers="${trojanUsers//\,\"alterId\":0/}"
            trojanUsers="${trojanUsers//${email}/${email}_Trojan_TCP}"

            local trojanTCPResult
            trojanTCPResult=$(jq -r ".inbounds[0].settings.clients += [${trojanUsers}]" ${configPath}04_trojan_TCP_inbounds.json)
            echo "${trojanTCPResult}" | jq . >${configPath}04_trojan_TCP_inbounds.json
        fi

        if echo ${currentInstallProtocolType} | grep -q 6; then
            local hysteriaResult
            hysteriaResult=$(jq -r ".auth.config += [\"${uuid}\"]" ${hysteriaConfigPath}config.json)
            echo "${hysteriaResult}" | jq . >${hysteriaConfigPath}config.json
        fi
    done

    reloadCore
    echoContent green " ---> 添加完成"
    manageAccount 1
}

# 移除用户
removeUser() {

    if echo ${currentInstallProtocolType} | grep -q 0 || echo ${currentInstallProtocolType} | grep -q trojan; then
        jq -r -c .inbounds[0].settings.clients[].email ${configPath}${frontingType}.json | awk '{print NR""":"$0}'
        read -r -p "请选择要删除的用户编号[仅支持单个删除]:" delUserIndex
        if [[ $(jq -r '.inbounds[0].settings.clients|length' ${configPath}${frontingType}.json) -lt ${delUserIndex} ]]; then
            echoContent red " ---> 选择错误"
        else
            delUserIndex=$((delUserIndex - 1))
            local vlessTcpResult
            vlessTcpResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}${frontingType}.json)
            echo "${vlessTcpResult}" | jq . >${configPath}${frontingType}.json
        fi
    fi
    if [[ -n "${delUserIndex}" ]]; then
        if echo ${currentInstallProtocolType} | grep -q 1; then
            local vlessWSResult
            vlessWSResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}03_VLESS_WS_inbounds.json)
            echo "${vlessWSResult}" | jq . >${configPath}03_VLESS_WS_inbounds.json
        fi

        if echo ${currentInstallProtocolType} | grep -q 2; then
            local trojangRPCUsers
            trojangRPCUsers=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}04_trojan_gRPC_inbounds.json)
            echo "${trojangRPCUsers}" | jq . >${configPath}04_trojan_gRPC_inbounds.json
        fi

        if echo ${currentInstallProtocolType} | grep -q 3; then
            local vmessWSResult
            vmessWSResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}05_VMess_WS_inbounds.json)
            echo "${vmessWSResult}" | jq . >${configPath}05_VMess_WS_inbounds.json
        fi

        if echo ${currentInstallProtocolType} | grep -q 5; then
            local vlessGRPCResult
            vlessGRPCResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}06_VLESS_gRPC_inbounds.json)
            echo "${vlessGRPCResult}" | jq . >${configPath}06_VLESS_gRPC_inbounds.json
        fi

        if echo ${currentInstallProtocolType} | grep -q 4; then
            local trojanTCPResult
            trojanTCPResult=$(jq -r 'del(.inbounds[0].settings.clients['${delUserIndex}'])' ${configPath}04_trojan_TCP_inbounds.json)
            echo "${trojanTCPResult}" | jq . >${configPath}04_trojan_TCP_inbounds.json
        fi

        if echo ${currentInstallProtocolType} | grep -q 6; then
            local hysteriaResult
            hysteriaResult=$(jq -r 'del(.auth.config['${delUserIndex}'])' ${hysteriaConfigPath}config.json)
            echo "${hysteriaResult}" | jq . >${hysteriaConfigPath}config.json
        fi

        reloadCore
    fi
    manageAccount 1
}
# 更新脚本
updateV2RayAgent() {
    echoContent skyBlue "\n进度  $1/${totalProgress} : 更新v2ray-agent脚本"
    rm -rf /etc/v2ray-agent/install.sh
    if wget --help | grep -q show-progress; then
        wget -c -q --show-progress -P /etc/v2ray-agent/ -N --no-check-certificate "https://raw.githubusercontent.com/mack-a/v2ray-agent/master/install.sh"
    else
        wget -c -q -P /etc/v2ray-agent/ -N --no-check-certificate "https://raw.githubusercontent.com/mack-a/v2ray-agent/master/install.sh"
    fi

    sudo chmod 700 /etc/v2ray-agent/install.sh
    local version
    version=$(grep '当前版本:v' "/etc/v2ray-agent/install.sh" | awk -F "[v]" '{print $2}' | tail -n +2 | head -n 1 | awk -F "[\"]" '{print $1}')

    echoContent green "\n ---> 更新完毕"
    echoContent yellow " ---> 请手动执行[vasma]打开脚本"
    echoContent green " ---> 当前版本:${version}\n"
    echoContent yellow "如更新不成功，请手动执行下面命令\n"
    echoContent skyBlue "wget -P /root -N --no-check-certificate https://raw.githubusercontent.com/mack-a/v2ray-agent/master/install.sh && chmod 700 /root/install.sh && /root/install.sh"
    echo
    exit 0
}

# 防火墙
handleFirewall() {
    if systemctl status ufw 2>/dev/null | grep -q "active (exited)" && [[ "$1" == "stop" ]]; then
        systemctl stop ufw >/dev/null 2>&1
        systemctl disable ufw >/dev/null 2>&1
        echoContent green " ---> ufw关闭成功"

    fi

    if systemctl status firewalld 2>/dev/null | grep -q "active (running)" && [[ "$1" == "stop" ]]; then
        systemctl stop firewalld >/dev/null 2>&1
        systemctl disable firewalld >/dev/null 2>&1
        echoContent green " ---> firewalld关闭成功"
    fi
}

# 安装BBR
bbrInstall() {
    echoContent red "\n=============================================================="
    echoContent green "BBR、DD脚本用的[ylx2016]的成熟作品，地址[https://github.com/ylx2016/Linux-NetSpeed]，请熟知"
    echoContent yellow "1.安装脚本【推荐原版BBR+FQ】"
    echoContent yellow "2.回退主目录"
    echoContent red "=============================================================="
    read -r -p "请选择:" installBBRStatus
    if [[ "${installBBRStatus}" == "1" ]]; then
        wget -N --no-check-certificate "https://raw.githubusercontent.com/ylx2016/Linux-NetSpeed/master/tcp.sh" && chmod +x tcp.sh && ./tcp.sh
    else
        menu
    fi
}

# 查看、检查日志
checkLog() {
    if [[ -z ${configPath} ]]; then
        echoContent red " ---> 没有检测到安装目录，请执行脚本安装内容"
    fi
    local logStatus=false
    if grep -q "access" ${configPath}00_log.json; then
        logStatus=true
    fi

    echoContent skyBlue "\n功能 $1/${totalProgress} : 查看日志"
    echoContent red "\n=============================================================="
    echoContent yellow "# 建议仅调试时打开access日志\n"

    if [[ "${logStatus}" == "false" ]]; then
        echoContent yellow "1.打开access日志"
    else
        echoContent yellow "1.关闭access日志"
    fi

    echoContent yellow "2.监听access日志"
    echoContent yellow "3.监听error日志"
    echoContent yellow "4.查看证书定时任务日志"
    echoContent yellow "5.查看证书安装日志"
    echoContent yellow "6.清空日志"
    echoContent red "=============================================================="

    read -r -p "请选择:" selectAccessLogType
    local configPathLog=${configPath//conf\//}

    case ${selectAccessLogType} in
    1)
        if [[ "${logStatus}" == "false" ]]; then
            cat <<EOF >${configPath}00_log.json
{
  "log": {
  	"access":"${configPathLog}access.log",
    "error": "${configPathLog}error.log",
    "loglevel": "debug"
  }
}
EOF
        elif [[ "${logStatus}" == "true" ]]; then
            cat <<EOF >${configPath}00_log.json
{
  "log": {
    "error": "${configPathLog}error.log",
    "loglevel": "warning"
  }
}
EOF
        fi
        reloadCore
        checkLog 1
        ;;
    2)
        tail -f ${configPathLog}access.log
        ;;
    3)
        tail -f ${configPathLog}error.log
        ;;
    4)
        tail -n 100 /etc/v2ray-agent/crontab_tls.log
        ;;
    5)
        tail -n 100 /etc/v2ray-agent/tls/acme.log
        ;;
    6)
        echo >${configPathLog}access.log
        echo >${configPathLog}error.log
        ;;
    esac
}

# 脚本快捷方式
aliasInstall() {

    if [[ -f "$HOME/install.sh" ]] && [[ -d "/etc/v2ray-agent" ]] && grep <"$HOME/install.sh" -q "作者:mack-a"; then
        mv "$HOME/install.sh" /etc/v2ray-agent/install.sh
        local vasmaType=
        if [[ -d "/usr/bin/" ]]; then
            if [[ ! -f "/usr/bin/vasma" ]]; then
                ln -s /etc/v2ray-agent/install.sh /usr/bin/vasma
                chmod 700 /usr/bin/vasma
                vasmaType=true
            fi

            rm -rf "$HOME/install.sh"
        elif [[ -d "/usr/sbin" ]]; then
            if [[ ! -f "/usr/sbin/vasma" ]]; then
                ln -s /etc/v2ray-agent/install.sh /usr/sbin/vasma
                chmod 700 /usr/sbin/vasma
                vasmaType=true
            fi
            rm -rf "$HOME/install.sh"
        fi
        if [[ "${vasmaType}" == "true" ]]; then
            echoContent green "快捷方式创建成功，可执行[vasma]重新打开脚本"
        fi
    fi
}

# 检查ipv6、ipv4
checkIPv6() {
    # pingIPv6=$(ping6 -c 1 www.google.com | sed '2{s/[^(]*(//;s/).*//;q;}' | tail -n +2)
    pingIPv6=$(ping6 -c 1 www.google.com | sed -n '1p' | sed 's/.*(//g;s/).*//g')

    if [[ -z "${pingIPv6}" ]]; then
        echoContent red " ---> 不支持ipv6"
        exit 0
    fi
}

# ipv6 分流
ipv6Routing() {
    if [[ -z "${configPath}" ]]; then
        echoContent red " ---> 未安装，请使用脚本安装"
        menu
        exit 0
    fi

    checkIPv6
    echoContent skyBlue "\n功能 1/${totalProgress} : IPv6分流"
    echoContent red "\n=============================================================="
    echoContent yellow "1.添加域名"
    echoContent yellow "2.卸载IPv6分流"
    echoContent red "=============================================================="
    read -r -p "请选择:" ipv6Status
    if [[ "${ipv6Status}" == "1" ]]; then
        echoContent red "=============================================================="
        echoContent yellow "# 注意事项\n"
        echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]"
        echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]"
        echoContent yellow "3.如内核启动失败请检查域名后重新添加域名"
        echoContent yellow "4.不允许有特殊字符，注意逗号的格式"
        echoContent yellow "5.每次添加都是重新添加，不会保留上次域名"
        echoContent yellow "6.强烈建议屏蔽国内的网站，下方输入【cn】即可屏蔽"
        echoContent yellow "7.录入示例:google,youtube,facebook,cn\n"
        read -r -p "请按照上面示例录入域名:" domainList

        if [[ -f "${configPath}09_routing.json" ]]; then

            unInstallRouting IPv6-out outboundTag

            routing=$(jq -r ".routing.rules += [{\"type\":\"field\",\"domain\":[\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"IPv6-out\"}]" ${configPath}09_routing.json)

            echo "${routing}" | jq . >${configPath}09_routing.json

        else
            cat <<EOF >"${configPath}09_routing.json"
{
    "routing":{
        "domainStrategy": "IPOnDemand",
        "rules": [
          {
            "type": "field",
            "domain": [
            	"geosite:${domainList//,/\",\"geosite:}"
            ],
            "outboundTag": "IPv6-out"
          }
        ]
  }
}
EOF
        fi

        unInstallOutbounds IPv6-out

        outbounds=$(jq -r '.outbounds += [{"protocol":"freedom","settings":{"domainStrategy":"UseIPv6"},"tag":"IPv6-out"}]' ${configPath}10_ipv4_outbounds.json)

        echo "${outbounds}" | jq . >${configPath}10_ipv4_outbounds.json

        echoContent green " ---> 添加成功"

    elif [[ "${ipv6Status}" == "2" ]]; then

        unInstallRouting IPv6-out outboundTag

        unInstallOutbounds IPv6-out

        echoContent green " ---> IPv6分流卸载成功"
    else
        echoContent red " ---> 选择错误"
        exit 0
    fi

    reloadCore
}

# bt下载管理
btTools() {
    if [[ -z "${configPath}" ]]; then
        echoContent red " ---> 未安装，请使用脚本安装"
        menu
        exit 0
    fi

    echoContent skyBlue "\n功能 1/${totalProgress} : bt下载管理"
    echoContent red "\n=============================================================="

    if [[ -f ${configPath}09_routing.json ]] && grep -q bittorrent <${configPath}09_routing.json; then
        echoContent yellow "当前状态:已禁用"
    else
        echoContent yellow "当前状态:未禁用"
    fi

    echoContent yellow "1.禁用"
    echoContent yellow "2.打开"
    echoContent red "=============================================================="
    read -r -p "请选择:" btStatus
    if [[ "${btStatus}" == "1" ]]; then

        if [[ -f "${configPath}09_routing.json" ]]; then

            unInstallRouting blackhole-out outboundTag

            routing=$(jq -r '.routing.rules += [{"type":"field","outboundTag":"blackhole-out","protocol":["bittorrent"]}]' ${configPath}09_routing.json)

            echo "${routing}" | jq . >${configPath}09_routing.json

        else
            cat <<EOF >${configPath}09_routing.json
{
    "routing":{
        "domainStrategy": "IPOnDemand",
        "rules": [
          {
            "type": "field",
            "outboundTag": "blackhole-out",
            "protocol": [ "bittorrent" ]
          }
        ]
  }
}
EOF
        fi

        installSniffing

        unInstallOutbounds blackhole-out

        outbounds=$(jq -r '.outbounds += [{"protocol":"blackhole","tag":"blackhole-out"}]' ${configPath}10_ipv4_outbounds.json)

        echo "${outbounds}" | jq . >${configPath}10_ipv4_outbounds.json

        echoContent green " ---> BT下载禁用成功"

    elif [[ "${btStatus}" == "2" ]]; then

        unInstallSniffing

        unInstallRouting blackhole-out outboundTag bittorrent

        #		unInstallOutbounds blackhole-out

        echoContent green " ---> BT下载打开成功"
    else
        echoContent red " ---> 选择错误"
        exit 0
    fi

    reloadCore
}

# 域名黑名单
blacklist() {
    if [[ -z "${configPath}" ]]; then
        echoContent red " ---> 未安装，请使用脚本安装"
        menu
        exit 0
    fi

    echoContent skyBlue "\n进度  $1/${totalProgress} : 域名黑名单"
    echoContent red "\n=============================================================="
    echoContent yellow "1.添加域名"
    echoContent yellow "2.删除黑名单"
    echoContent red "=============================================================="
    read -r -p "请选择:" blacklistStatus
    if [[ "${blacklistStatus}" == "1" ]]; then
        echoContent red "=============================================================="
        echoContent yellow "# 注意事项\n"
        echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]"
        echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]"
        echoContent yellow "3.如内核启动失败请检查域名后重新添加域名"
        echoContent yellow "4.不允许有特殊字符，注意逗号的格式"
        echoContent yellow "5.每次添加都是重新添加，不会保留上次域名"
        echoContent yellow "6.录入示例:speedtest,facebook,cn\n"
        read -r -p "请按照上面示例录入域名:" domainList

        if [[ -f "${configPath}09_routing.json" ]]; then
            unInstallRouting blackhole-out outboundTag

            routing=$(jq -r ".routing.rules += [{\"type\":\"field\",\"domain\":[\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"blackhole-out\"}]" ${configPath}09_routing.json)

            echo "${routing}" | jq . >${configPath}09_routing.json

        else
            cat <<EOF >${configPath}09_routing.json
{
    "routing":{
        "domainStrategy": "IPOnDemand",
        "rules": [
          {
            "type": "field",
            "domain": [
            	"geosite:${domainList//,/\",\"geosite:}"
            ],
            "outboundTag": "blackhole-out"
          }
        ]
  }
}
EOF
        fi

        echoContent green " ---> 添加成功"

    elif [[ "${blacklistStatus}" == "2" ]]; then

        unInstallRouting blackhole-out outboundTag

        echoContent green " ---> 域名黑名单删除成功"
    else
        echoContent red " ---> 选择错误"
        exit 0
    fi
    reloadCore
}

# 根据tag卸载Routing
unInstallRouting() {
    local tag=$1
    local type=$2
    local protocol=$3

    if [[ -f "${configPath}09_routing.json" ]]; then
        local routing
        if grep -q "${tag}" ${configPath}09_routing.json && grep -q "${type}" ${configPath}09_routing.json; then

            jq -c .routing.rules[] ${configPath}09_routing.json | while read -r line; do
                local index=$((index + 1))
                local delStatus=0
                if [[ "${type}" == "outboundTag" ]] && echo "${line}" | jq .outboundTag | grep -q "${tag}"; then
                    delStatus=1
                elif [[ "${type}" == "inboundTag" ]] && echo "${line}" | jq .inboundTag | grep -q "${tag}"; then
                    delStatus=1
                fi

                if [[ -n ${protocol} ]] && echo "${line}" | jq .protocol | grep -q "${protocol}"; then
                    delStatus=1
                elif [[ -z ${protocol} ]] && [[ $(echo "${line}" | jq .protocol) != "null" ]]; then
                    delStatus=0
                fi

                if [[ ${delStatus} == 1 ]]; then
                    routing=$(jq -r 'del(.routing.rules['"$(("${index}" - 1))"'])' ${configPath}09_routing.json)
                    echo "${routing}" | jq . >${configPath}09_routing.json
                fi
            done
        fi
    fi
}

# 根据tag卸载出站
unInstallOutbounds() {
    local tag=$1

    if grep -q "${tag}" ${configPath}10_ipv4_outbounds.json; then
        local ipv6OutIndex
        ipv6OutIndex=$(jq .outbounds[].tag ${configPath}10_ipv4_outbounds.json | awk '{print ""NR""":"$0}' | grep "${tag}" | awk -F "[:]" '{print $1}' | head -1)
        if [[ ${ipv6OutIndex} -gt 0 ]]; then
            routing=$(jq -r 'del(.outbounds['$(("${ipv6OutIndex}" - 1))'])' ${configPath}10_ipv4_outbounds.json)
            echo "${routing}" | jq . >${configPath}10_ipv4_outbounds.json
        fi
    fi

}

# 卸载嗅探
unInstallSniffing() {

    find ${configPath} -name "*inbounds.json*" | awk -F "[c][o][n][f][/]" '{print $2}' | while read -r inbound; do
        sniffing=$(jq -r 'del(.inbounds[0].sniffing)' "${configPath}${inbound}")
        echo "${sniffing}" | jq . >"${configPath}${inbound}"
    done
}

# 安装嗅探
installSniffing() {

    find ${configPath} -name "*inbounds.json*" | awk -F "[c][o][n][f][/]" '{print $2}' | while read -r inbound; do
        sniffing=$(jq -r '.inbounds[0].sniffing = {"enabled":true,"destOverride":["http","tls"]}' "${configPath}${inbound}")
        echo "${sniffing}" | jq . >"${configPath}${inbound}"
    done
}

# warp分流
warpRouting() {
    echoContent skyBlue "\n进度  $1/${totalProgress} : WARP分流"
    echoContent red "=============================================================="
    #	echoContent yellow "# 注意事项\n"
    #	echoContent yellow "1.官方warp经过几轮测试有bug，重启会导致warp失效，并且无法启动，也有可能CPU使用率暴涨"
    #	echoContent yellow "2.不重启机器可正常使用，如果非要使用官方warp，建议不重启机器"
    #	echoContent yellow "3.有的机器重启后仍正常使用"
    #	echoContent yellow "4.重启后无法使用，也可卸载重新安装"
    # 安装warp
    if [[ -z $(which warp-cli) ]]; then
        echo
        read -r -p "WARP未安装，是否安装 ？[y/n]:" installCloudflareWarpStatus
        if [[ "${installCloudflareWarpStatus}" == "y" ]]; then
            installWarp
        else
            echoContent yellow " ---> 放弃安装"
            exit 0
        fi
    fi

    echoContent red "\n=============================================================="
    echoContent yellow "1.添加域名"
    echoContent yellow "2.卸载WARP分流"
    echoContent red "=============================================================="
    read -r -p "请选择:" warpStatus
    if [[ "${warpStatus}" == "1" ]]; then
        echoContent red "=============================================================="
        echoContent yellow "# 注意事项\n"
        echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]"
        echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]"
        echoContent yellow "3.只可以把流量分流给warp，不可指定是ipv4或者ipv6"
        echoContent yellow "4.如内核启动失败请检查域名后重新添加域名"
        echoContent yellow "5.不允许有特殊字符，注意逗号的格式"
        echoContent yellow "6.每次添加都是重新添加，不会保留上次域名"
        echoContent yellow "7.录入示例:google,youtube,facebook\n"
        read -r -p "请按照上面示例录入域名:" domainList

        if [[ -f "${configPath}09_routing.json" ]]; then
            unInstallRouting warp-socks-out outboundTag

            routing=$(jq -r ".routing.rules += [{\"type\":\"field\",\"domain\":[\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"warp-socks-out\"}]" ${configPath}09_routing.json)

            echo "${routing}" | jq . >${configPath}09_routing.json

        else
            cat <<EOF >${configPath}09_routing.json
{
    "routing":{
        "domainStrategy": "IPOnDemand",
        "rules": [
          {
            "type": "field",
            "domain": [
            	"geosite:${domainList//,/\",\"geosite:}"
            ],
            "outboundTag": "warp-socks-out"
          }
        ]
  }
}
EOF
        fi
        unInstallOutbounds warp-socks-out

        local outbounds
        outbounds=$(jq -r '.outbounds += [{"protocol":"socks","settings":{"servers":[{"address":"127.0.0.1","port":31303}]},"tag":"warp-socks-out"}]' ${configPath}10_ipv4_outbounds.json)

        echo "${outbounds}" | jq . >${configPath}10_ipv4_outbounds.json

        echoContent green " ---> 添加成功"

    elif [[ "${warpStatus}" == "2" ]]; then

        ${removeType} cloudflare-warp >/dev/null 2>&1

        unInstallRouting warp-socks-out outboundTag

        unInstallOutbounds warp-socks-out

        echoContent green " ---> WARP分流卸载成功"
    else
        echoContent red " ---> 选择错误"
        exit 0
    fi
    reloadCore
}
# 流媒体工具箱
streamingToolbox() {
    echoContent skyBlue "\n功能 1/${totalProgress} : 流媒体工具箱"
    echoContent red "\n=============================================================="
    #	echoContent yellow "1.Netflix检测"
    echoContent yellow "1.任意门落地机解锁流媒体"
    echoContent yellow "2.DNS解锁流媒体"
    echoContent yellow "3.VMess+WS+TLS解锁流媒体"
    read -r -p "请选择:" selectType

    case ${selectType} in
    1)
        dokodemoDoorUnblockStreamingMedia
        ;;
    2)
        dnsUnlockNetflix
        ;;
    3)
        unblockVMessWSTLSStreamingMedia
        ;;
    esac

}

# 任意门解锁流媒体
dokodemoDoorUnblockStreamingMedia() {
    echoContent skyBlue "\n功能 1/${totalProgress} : 任意门落地机解锁流媒体"
    echoContent red "\n=============================================================="
    echoContent yellow "# 注意事项"
    echoContent yellow "任意门解锁详解，请查看此文章[https://github.com/mack-a/v2ray-agent/blob/master/documents/netflix/dokodemo-unblock_netflix.md]\n"

    echoContent yellow "1.添加出站"
    echoContent yellow "2.添加入站"
    echoContent yellow "3.卸载"
    read -r -p "请选择:" selectType

    case ${selectType} in
    1)
        setDokodemoDoorUnblockStreamingMediaOutbounds
        ;;
    2)
        setDokodemoDoorUnblockStreamingMediaInbounds
        ;;
    3)
        removeDokodemoDoorUnblockStreamingMedia
        ;;
    esac
}

# VMess+WS+TLS 出战解锁流媒体【仅出站】
unblockVMessWSTLSStreamingMedia() {
    echoContent skyBlue "\n功能 1/${totalProgress} : VMess+WS+TLS 出站解锁流媒体"
    echoContent red "\n=============================================================="
    echoContent yellow "# 注意事项"
    echoContent yellow "适合通过其他服务商提供的VMess解锁服务\n"

    echoContent yellow "1.添加出站"
    echoContent yellow "2.卸载"
    read -r -p "请选择:" selectType

    case ${selectType} in
    1)
        setVMessWSTLSUnblockStreamingMediaOutbounds
        ;;
    2)
        removeVMessWSTLSUnblockStreamingMedia
        ;;
    esac
}

# 设置VMess+WS+TLS解锁Netflix【仅出站】
setVMessWSTLSUnblockStreamingMediaOutbounds() {
    read -r -p "请输入解锁流媒体VMess+WS+TLS的地址:" setVMessWSTLSAddress
    echoContent red "=============================================================="
    echoContent yellow "# 注意事项\n"
    echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]"
    echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]"
    echoContent yellow "3.如内核启动失败请检查域名后重新添加域名"
    echoContent yellow "4.不允许有特殊字符，注意逗号的格式"
    echoContent yellow "5.每次添加都是重新添加，不会保留上次域名"
    echoContent yellow "6.录入示例:netflix,disney,hulu\n"
    read -r -p "请按照上面示例录入域名:" domainList

    if [[ -z ${domainList} ]]; then
        echoContent red " ---> 域名不可为空"
        setVMessWSTLSUnblockStreamingMediaOutbounds
    fi

    if [[ -n "${setVMessWSTLSAddress}" ]]; then

        unInstallOutbounds VMess-out

        echo
        read -r -p "请输入VMess+WS+TLS的端口:" setVMessWSTLSPort
        echo
        if [[ -z "${setVMessWSTLSPort}" ]]; then
            echoContent red " ---> 端口不可为空"
        fi

        read -r -p "请输入VMess+WS+TLS的UUID:" setVMessWSTLSUUID
        echo
        if [[ -z "${setVMessWSTLSUUID}" ]]; then
            echoContent red " ---> UUID不可为空"
        fi

        read -r -p "请输入VMess+WS+TLS的Path路径:" setVMessWSTLSPath
        echo
        if [[ -z "${setVMessWSTLSPath}" ]]; then
            echoContent red " ---> 路径不可为空"
        fi

        outbounds=$(jq -r ".outbounds += [{\"tag\":\"VMess-out\",\"protocol\":\"vmess\",\"streamSettings\":{\"network\":\"ws\",\"security\":\"tls\",\"tlsSettings\":{\"allowInsecure\":false},\"wsSettings\":{\"path\":\"${setVMessWSTLSPath}\"}},\"mux\":{\"enabled\":true,\"concurrency\":8},\"settings\":{\"vnext\":[{\"address\":\"${setVMessWSTLSAddress}\",\"port\":${setVMessWSTLSPort},\"users\":[{\"id\":\"${setVMessWSTLSUUID}\",\"security\":\"auto\",\"alterId\":0}]}]}}]" ${configPath}10_ipv4_outbounds.json)

        echo "${outbounds}" | jq . >${configPath}10_ipv4_outbounds.json

        if [[ -f "${configPath}09_routing.json" ]]; then
            unInstallRouting VMess-out outboundTag

            local routing

            routing=$(jq -r ".routing.rules += [{\"type\":\"field\",\"domain\":[\"ip.sb\",\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"VMess-out\"}]" ${configPath}09_routing.json)

            echo "${routing}" | jq . >${configPath}09_routing.json
        else
            cat <<EOF >${configPath}09_routing.json
{
  "routing": {
    "rules": [
      {
        "type": "field",
        "domain": [
          "ip.sb",
          "geosite:${domainList//,/\",\"geosite:}"
        ],
        "outboundTag": "VMess-out"
      }
    ]
  }
}
EOF
        fi
        reloadCore
        echoContent green " ---> 添加出站解锁成功"
        exit 0
    fi
    echoContent red " ---> 地址不可为空"
    setVMessWSTLSUnblockStreamingMediaOutbounds
}

# 设置任意门解锁Netflix【出站】
setDokodemoDoorUnblockStreamingMediaOutbounds() {
    read -r -p "请输入解锁流媒体 vps的IP:" setIP
    echoContent red "=============================================================="
    echoContent yellow "# 注意事项\n"
    echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]"
    echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]"
    echoContent yellow "3.如内核启动失败请检查域名后重新添加域名"
    echoContent yellow "4.不允许有特殊字符，注意逗号的格式"
    echoContent yellow "5.每次添加都是重新添加，不会保留上次域名"
    echoContent yellow "6.录入示例:netflix,disney,hulu\n"
    read -r -p "请按照上面示例录入域名:" domainList

    if [[ -z ${domainList} ]]; then
        echoContent red " ---> 域名不可为空"
        setDokodemoDoorUnblockStreamingMediaOutbounds
    fi

    if [[ -n "${setIP}" ]]; then

        unInstallOutbounds streamingMedia-80
        unInstallOutbounds streamingMedia-443

        outbounds=$(jq -r ".outbounds += [{\"tag\":\"streamingMedia-80\",\"protocol\":\"freedom\",\"settings\":{\"domainStrategy\":\"AsIs\",\"redirect\":\"${setIP}:22387\"}},{\"tag\":\"streamingMedia-443\",\"protocol\":\"freedom\",\"settings\":{\"domainStrategy\":\"AsIs\",\"redirect\":\"${setIP}:22388\"}}]" ${configPath}10_ipv4_outbounds.json)

        echo "${outbounds}" | jq . >${configPath}10_ipv4_outbounds.json

        if [[ -f "${configPath}09_routing.json" ]]; then
            unInstallRouting streamingMedia-80 outboundTag
            unInstallRouting streamingMedia-443 outboundTag

            local routing

            routing=$(jq -r ".routing.rules += [{\"type\":\"field\",\"port\":80,\"domain\":[\"ip.sb\",\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"streamingMedia-80\"},{\"type\":\"field\",\"port\":443,\"domain\":[\"ip.sb\",\"geosite:${domainList//,/\",\"geosite:}\"],\"outboundTag\":\"streamingMedia-443\"}]" ${configPath}09_routing.json)

            echo "${routing}" | jq . >${configPath}09_routing.json
        else
            cat <<EOF >${configPath}09_routing.json
{
  "routing": {
    "domainStrategy": "AsIs",
    "rules": [
      {
        "type": "field",
        "port": 80,
        "domain": [
          "ip.sb",
          "geosite:${domainList//,/\",\"geosite:}"
        ],
        "outboundTag": "streamingMedia-80"
      },
      {
        "type": "field",
        "port": 443,
        "domain": [
          "ip.sb",
          "geosite:${domainList//,/\",\"geosite:}"
        ],
        "outboundTag": "streamingMedia-443"
      }
    ]
  }
}
EOF
        fi
        reloadCore
        echoContent green " ---> 添加出站解锁成功"
        exit 0
    fi
    echoContent red " ---> ip不可为空"
}

# 设置任意门解锁Netflix【入站】
setDokodemoDoorUnblockStreamingMediaInbounds() {

    echoContent skyBlue "\n功能 1/${totalProgress} : 任意门添加入站"
    echoContent red "\n=============================================================="
    echoContent yellow "# 注意事项\n"
    echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]"
    echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]"
    echoContent yellow "3.如内核启动失败请检查域名后重新添加域名"
    echoContent yellow "4.不允许有特殊字符，注意逗号的格式"
    echoContent yellow "5.每次添加都是重新添加，不会保留上次域名"
    echoContent yellow "6.ip录入示例:1.1.1.1,1.1.1.2"
    echoContent yellow "7.下面的域名一定要和出站的vps一致"
    #	echoContent yellow "8.如有防火墙请手动开启22387、22388端口"
    echoContent yellow "8.域名录入示例:netflix,disney,hulu\n"
    read -r -p "请输入允许访问该解锁 vps的IP:" setIPs
    if [[ -n "${setIPs}" ]]; then
        read -r -p "请按照上面示例录入域名:" domainList
        allowPort 22387
        allowPort 22388

        cat <<EOF >${configPath}01_netflix_inbounds.json
{
  "inbounds": [
    {
      "listen": "0.0.0.0",
      "port": 22387,
      "protocol": "dokodemo-door",
      "settings": {
        "address": "0.0.0.0",
        "port": 80,
        "network": "tcp",
        "followRedirect": false
      },
      "sniffing": {
        "enabled": true,
        "destOverride": [
          "http"
        ]
      },
      "tag": "streamingMedia-80"
    },
    {
      "listen": "0.0.0.0",
      "port": 22388,
      "protocol": "dokodemo-door",
      "settings": {
        "address": "0.0.0.0",
        "port": 443,
        "network": "tcp",
        "followRedirect": false
      },
      "sniffing": {
        "enabled": true,
        "destOverride": [
          "tls"
        ]
      },
      "tag": "streamingMedia-443"
    }
  ]
}
EOF

        cat <<EOF >${configPath}10_ipv4_outbounds.json
{
    "outbounds":[
        {
            "protocol":"freedom",
            "settings":{
                "domainStrategy":"UseIPv4"
            },
            "tag":"IPv4-out"
        },
        {
            "protocol":"freedom",
            "settings":{
                "domainStrategy":"UseIPv6"
            },
            "tag":"IPv6-out"
        },
        {
            "protocol":"blackhole",
            "tag":"blackhole-out"
        }
    ]
}
EOF

        if [[ -f "${configPath}09_routing.json" ]]; then
            unInstallRouting streamingMedia-80 inboundTag
            unInstallRouting streamingMedia-443 inboundTag

            local routing
            routing=$(jq -r ".routing.rules += [{\"source\":[\"${setIPs//,/\",\"}\"],\"type\":\"field\",\"inboundTag\":[\"streamingMedia-80\",\"streamingMedia-443\"],\"outboundTag\":\"direct\"},{\"domains\":[\"geosite:${domainList//,/\",\"geosite:}\"],\"type\":\"field\",\"inboundTag\":[\"streamingMedia-80\",\"streamingMedia-443\"],\"outboundTag\":\"blackhole-out\"}]" ${configPath}09_routing.json)
            echo "${routing}" | jq . >${configPath}09_routing.json
        else
            cat <<EOF >${configPath}09_routing.json
            {
              "routing": {
                "rules": [
                  {
                    "source": [
                    	"${setIPs//,/\",\"}"
                    ],
                    "type": "field",
                    "inboundTag": [
                      "streamingMedia-80",
                      "streamingMedia-443"
                    ],
                    "outboundTag": "direct"
                  },
                  {
                    "domains": [
                    	"geosite:${domainList//,/\",\"geosite:}"
                    ],
                    "type": "field",
                    "inboundTag": [
                      "streamingMedia-80",
                      "streamingMedia-443"
                    ],
                    "outboundTag": "blackhole-out"
                  }
                ]
              }
            }
EOF

        fi

        reloadCore
        echoContent green " ---> 添加落地机入站解锁成功"
        exit 0
    fi
    echoContent red " ---> ip不可为空"
}

# 移除任意门解锁Netflix
removeDokodemoDoorUnblockStreamingMedia() {

    unInstallOutbounds streamingMedia-80
    unInstallOutbounds streamingMedia-443

    unInstallRouting streamingMedia-80 inboundTag
    unInstallRouting streamingMedia-443 inboundTag

    unInstallRouting streamingMedia-80 outboundTag
    unInstallRouting streamingMedia-443 outboundTag

    rm -rf ${configPath}01_netflix_inbounds.json

    reloadCore
    echoContent green " ---> 卸载成功"
}

# 移除VMess+WS+TLS解锁流媒体
removeVMessWSTLSUnblockStreamingMedia() {

    unInstallOutbounds VMess-out

    unInstallRouting VMess-out outboundTag

    reloadCore
    echoContent green " ---> 卸载成功"
}

# 重启核心
reloadCore() {
    if [[ "${coreInstallType}" == "1" ]]; then
        handleXray stop
        handleXray start
    elif [[ "${coreInstallType}" == "2" ]]; then
        handleV2Ray stop
        handleV2Ray start
    fi

    if [[ -n "${hysteriaConfigPath}" ]]; then
        handleHysteria stop
        handleHysteria start
    fi
}

# dns解锁Netflix
dnsUnlockNetflix() {
    if [[ -z "${configPath}" ]]; then
        echoContent red " ---> 未安装，请使用脚本安装"
        menu
        exit 0
    fi
    echoContent skyBlue "\n功能 1/${totalProgress} : DNS解锁流媒体"
    echoContent red "\n=============================================================="
    echoContent yellow "1.添加"
    echoContent yellow "2.卸载"
    read -r -p "请选择:" selectType

    case ${selectType} in
    1)
        setUnlockDNS
        ;;
    2)
        removeUnlockDNS
        ;;
    esac
}

# 设置dns
setUnlockDNS() {
    read -r -p "请输入解锁流媒体DNS:" setDNS
    if [[ -n ${setDNS} ]]; then
        echoContent red "=============================================================="
        echoContent yellow "# 注意事项\n"
        echoContent yellow "1.规则仅支持预定义域名列表[https://github.com/v2fly/domain-list-community]"
        echoContent yellow "2.详细文档[https://www.v2fly.org/config/routing.html]"
        echoContent yellow "3.如内核启动失败请检查域名后重新添加域名"
        echoContent yellow "4.不允许有特殊字符，注意逗号的格式"
        echoContent yellow "5.每次添加都是重新添加，不会保留上次域名"
        echoContent yellow "6.录入示例:netflix,disney,hulu"
        echoContent yellow "7.默认方案请输入1，默认方案包括以下内容"
        echoContent yellow "netflix,bahamut,hulu,hbo,disney,bbc,4chan,fox,abema,dmm,niconico,pixiv,bilibili,viu"
        read -r -p "请按照上面示例录入域名:" domainList
        if [[ "${domainList}" == "1" ]]; then
            cat <<EOF >${configPath}11_dns.json
            {
            	"dns": {
            		"servers": [
            			{
            				"address": "${setDNS}",
            				"port": 53,
            				"domains": [
            					"geosite:netflix",
            					"geosite:bahamut",
            					"geosite:hulu",
            					"geosite:hbo",
            					"geosite:disney",
            					"geosite:bbc",
            					"geosite:4chan",
            					"geosite:fox",
            					"geosite:abema",
            					"geosite:dmm",
            					"geosite:niconico",
            					"geosite:pixiv",
            					"geosite:bilibili",
            					"geosite:viu"
            				]
            			},
            		"localhost"
            		]
            	}
            }
EOF
        elif [[ -n "${domainList}" ]]; then
            cat <<EOF >${configPath}11_dns.json
                        {
                        	"dns": {
                        		"servers": [
                        			{
                        				"address": "${setDNS}",
                        				"port": 53,
                        				"domains": [
                        					"geosite:${domainList//,/\",\"geosite:}"
                        				]
                        			},
                        		"localhost"
                        		]
                        	}
                        }
EOF
        fi

        reloadCore

        echoContent yellow "\n ---> 如还无法观看可以尝试以下两种方案"
        echoContent yellow " 1.重启vps"
        echoContent yellow " 2.卸载dns解锁后，修改本地的[/etc/resolv.conf]DNS设置并重启vps\n"
    else
        echoContent red " ---> dns不可为空"
    fi
    exit 0
}

# 移除Netflix解锁
removeUnlockDNS() {
    cat <<EOF >${configPath}11_dns.json
{
	"dns": {
		"servers": [
			"localhost"
		]
	}
}
EOF
    reloadCore

    echoContent green " ---> 卸载成功"

    exit 0
}

# v2ray-core个性化安装
customV2RayInstall() {
    echoContent skyBlue "\n========================个性化安装============================"
    echoContent yellow "VLESS前置，默认安装0，如果只需要安装0，则只选择0即可"
    echoContent yellow "0.VLESS+TLS/XTLS+TCP"
    echoContent yellow "1.VLESS+TLS+WS[CDN]"
    echoContent yellow "2.Trojan+TLS+gRPC[CDN]"
    echoContent yellow "3.VMess+TLS+WS[CDN]"
    echoContent yellow "4.Trojan+TLS"
    echoContent yellow "5.VLESS+TLS+gRPC[CDN]"
    read -r -p "请选择[多选]，[例如:123]:" selectCustomInstallType
    echoContent skyBlue "--------------------------------------------------------------"
    if [[ -z ${selectCustomInstallType} ]]; then
        selectCustomInstallType=0
    fi
    if [[ "${selectCustomInstallType}" =~ ^[0-5]+$ ]]; then
        cleanUp xrayClean
        totalProgress=17
        installTools 1
        # 申请tls
        initTLSNginxConfig 2
        installTLS 3
        handleNginx stop
        # 随机path
        if echo ${selectCustomInstallType} | grep -q 1 || echo ${selectCustomInstallType} | grep -q 3 || echo ${selectCustomInstallType} | grep -q 4; then
            randomPathFunction 5
            customCDNIP 6
        fi
        nginxBlog 7
        updateRedirectNginxConf
        handleNginx start

        # 安装V2Ray
        installV2Ray 8
        installV2RayService 9
        initV2RayConfig custom 10
        cleanUp xrayDel
        installCronTLS 14
        handleV2Ray stop
        handleV2Ray start
        # 生成账号
        checkGFWStatue 15
        showAccounts 16
    else
        echoContent red " ---> 输入不合法"
        customV2RayInstall
    fi
}

# Xray-core个性化安装
customXrayInstall() {
    echoContent skyBlue "\n========================个性化安装============================"
    echoContent yellow "VLESS前置，默认安装0，如果只需要安装0，则只选择0即可"
    echoContent yellow "0.VLESS+TLS/XTLS+TCP"
    echoContent yellow "1.VLESS+TLS+WS[CDN]"
    echoContent yellow "2.Trojan+TLS+gRPC[CDN]"
    echoContent yellow "3.VMess+TLS+WS[CDN]"
    echoContent yellow "4.Trojan+TLS"
    echoContent yellow "5.VLESS+TLS+gRPC[CDN]"
    read -r -p "请选择[多选]，[例如:123]:" selectCustomInstallType
    echoContent skyBlue "--------------------------------------------------------------"
    if [[ -z ${selectCustomInstallType} ]]; then
        echoContent red " ---> 不可为空"
        customXrayInstall
    elif [[ "${selectCustomInstallType}" =~ ^[0-5]+$ ]]; then
        cleanUp v2rayClean
        totalProgress=17
        installTools 1
        # 申请tls
        initTLSNginxConfig 2
        handleXray stop
        handleNginx start
        checkIP

        installTLS 3
        handleNginx stop
        # 随机path
        if echo "${selectCustomInstallType}" | grep -q 1 || echo "${selectCustomInstallType}" | grep -q 2 || echo "${selectCustomInstallType}" | grep -q 3 || echo "${selectCustomInstallType}" | grep -q 5; then
            randomPathFunction 5
            customCDNIP 6
        fi
        nginxBlog 7
        updateRedirectNginxConf
        handleNginx start

        # 安装V2Ray
        installXray 8
        installXrayService 9
        initXrayConfig custom 10
        cleanUp v2rayDel

        installCronTLS 14
        handleXray stop
        handleXray start
        # 生成账号
        checkGFWStatue 15
        showAccounts 16
    else
        echoContent red " ---> 输入不合法"
        customXrayInstall
    fi
}

# 选择核心安装---v2ray-core、xray-core
selectCoreInstall() {
    echoContent skyBlue "\n功能 1/${totalProgress} : 选择核心安装"
    echoContent red "\n=============================================================="
    echoContent yellow "1.Xray-core"
    echoContent yellow "2.v2ray-core"
    echoContent red "=============================================================="
    read -r -p "请选择:" selectCoreType
    case ${selectCoreType} in
    1)
        if [[ "${selectInstallType}" == "2" ]]; then
            customXrayInstall
        else
            xrayCoreInstall
        fi
        ;;
    2)
        v2rayCoreVersion=
        if [[ "${selectInstallType}" == "2" ]]; then
            customV2RayInstall
        else
            v2rayCoreInstall
        fi
        ;;
    3)
        v2rayCoreVersion=v4.32.1
        if [[ "${selectInstallType}" == "2" ]]; then
            customV2RayInstall
        else
            v2rayCoreInstall
        fi
        ;;
    *)
        echoContent red ' ---> 选择错误，重新选择'
        selectCoreInstall
        ;;
    esac
}

# v2ray-core 安装
v2rayCoreInstall() {
    cleanUp xrayClean
    selectCustomInstallType=
    totalProgress=13
    installTools 2
    # 申请tls
    initTLSNginxConfig 3

    handleV2Ray stop
    handleNginx start
    checkIP

    installTLS 4
    handleNginx stop
    #	initNginxConfig 5
    randomPathFunction 5
    # 安装V2Ray
    installV2Ray 6
    installV2RayService 7
    customCDNIP 8
    initV2RayConfig all 9
    cleanUp xrayDel
    installCronTLS 10
    nginxBlog 11
    updateRedirectNginxConf
    handleV2Ray stop
    sleep 2
    handleV2Ray start
    handleNginx start
    # 生成账号
    checkGFWStatue 12
    showAccounts 13
}

# xray-core 安装
xrayCoreInstall() {
    cleanUp v2rayClean
    selectCustomInstallType=
    totalProgress=13
    installTools 2
    # 申请tls
    initTLSNginxConfig 3

    handleXray stop
    handleNginx start
    checkIP

    installTLS 4
    handleNginx stop
    randomPathFunction 5
    # 安装Xray
    # handleV2Ray stop
    installXray 6
    installXrayService 7
    customCDNIP 8
    initXrayConfig all 9
    cleanUp v2rayDel
    installCronTLS 10
    nginxBlog 11
    updateRedirectNginxConf
    handleXray stop
    sleep 2
    handleXray start

    handleNginx start
    # 生成账号
    checkGFWStatue 12
    showAccounts 13
}
# Hysteria安装
hysteriaCoreInstall() {
    if [[ -z "${coreInstallType}" ]]; then
        echoContent red "\n ---> 由于环境依赖，如安装hysteria，请先安装Xray/V2ray"
        menu
        exit 0
    fi
    totalProgress=5
    installHysteria 1
    initHysteriaConfig 2
    installHysteriaService 3
    handleHysteria stop
    handleHysteria start
    showAccounts 5
}
# 卸载 hysteria
unInstallHysteriaCore() {

    if [[ -z "${hysteriaConfigPath}" ]]; then
        echoContent red "\n ---> 未安装"
        exit 0
    fi
    handleHysteria stop
    rm -rf /etc/v2ray-agent/hysteria/*
    rm -rf /etc/systemd/system/hysteria.service
    echoContent green " ---> 卸载完成"
}

# 核心管理
coreVersionManageMenu() {

    if [[ -z "${coreInstallType}" ]]; then
        echoContent red "\n ---> 没有检测到安装目录，请执行脚本安装内容"
        menu
        exit 0
    fi
    if [[ "${coreInstallType}" == "1" ]]; then
        xrayVersionManageMenu 1
    elif [[ "${coreInstallType}" == "2" ]]; then
        v2rayCoreVersion=
        v2rayVersionManageMenu 1
    fi
}
# 定时任务检查证书
cronRenewTLS() {
    if [[ "${renewTLS}" == "RenewTLS" ]]; then
        renewalTLS
        exit 0
    fi
}
# 账号管理
manageAccount() {
    echoContent skyBlue "\n功能 1/${totalProgress} : 账号管理"
    echoContent red "\n=============================================================="
    echoContent yellow "# 每次删除、添加账号后，需要重新查看订阅生成订阅"
    echoContent yellow "# 添加单个用户时可自定义email和uuid"
    echoContent yellow "# 如安装了Hysteria，账号会同时添加到Hysteria\n"
    echoContent yellow "1.查看账号"
    echoContent yellow "2.查看订阅"
    echoContent yellow "3.添加用户"
    echoContent yellow "4.删除用户"
    echoContent red "=============================================================="
    read -r -p "请输入:" manageAccountStatus
    if [[ "${manageAccountStatus}" == "1" ]]; then
        showAccounts 1
    elif [[ "${manageAccountStatus}" == "2" ]]; then
        subscribe 1
    elif [[ "${manageAccountStatus}" == "3" ]]; then
        addUser
    elif [[ "${manageAccountStatus}" == "4" ]]; then
        removeUser
    else
        echoContent red " ---> 选择错误"
    fi
}

# 订阅
subscribe() {
    if [[ -n "${configPath}" ]]; then
        echoContent skyBlue "-------------------------备注---------------------------------"
        echoContent yellow "# 查看订阅时会重新生成订阅"
        echoContent yellow "# 每次添加、删除账号需要重新查看订阅"
        rm -rf /etc/v2ray-agent/subscribe/*
        rm -rf /etc/v2ray-agent/subscribe_tmp/*
        showAccounts >/dev/null
        mv /etc/v2ray-agent/subscribe_tmp/* /etc/v2ray-agent/subscribe/

        if [[ -n $(ls /etc/v2ray-agent/subscribe/) ]]; then
            find /etc/v2ray-agent/subscribe/* | while read -r email; do
                email=$(echo "${email}" | awk -F "[b][e][/]" '{print $2}')

                local base64Result
                base64Result=$(base64 -w 0 "/etc/v2ray-agent/subscribe/${email}")
                echo "${base64Result}" >"/etc/v2ray-agent/subscribe/${email}"
                echoContent skyBlue "--------------------------------------------------------------"
                echoContent yellow "email:${email}\n"
                local currentDomain=${currentHost}

                if [[ -n "${currentDefaultPort}" && "${currentDefaultPort}" != "443" ]]; then
                    currentDomain="${currentHost}:${currentDefaultPort}"
                fi

                echoContent yellow "url:https://${currentDomain}/s/${email}\n"
                echoContent yellow "在线二维码:https://api.qrserver.com/v1/create-qr-code/?size=400x400&data=https://${currentDomain}/s/${email}\n"
                echo "https://${currentDomain}/s/${email}" | qrencode -s 10 -m 1 -t UTF8
                echoContent skyBlue "--------------------------------------------------------------"
            done
        fi
    else
        echoContent red " ---> 未安装"
    fi
}

# 切换alpn
switchAlpn() {
    echoContent skyBlue "\n功能 1/${totalProgress} : 切换alpn"
    if [[ -z ${currentAlpn} ]]; then
        echoContent red " ---> 无法读取alpn，请检查是否安装"
        exit 0
    fi

    echoContent red "\n=============================================================="
    echoContent green "当前alpn首位为:${currentAlpn}"
    echoContent yellow "  1.当http/1.1首位时，trojan可用，gRPC部分客户端可用【客户端支持手动选择alpn的可用】"
    echoContent yellow "  2.当h2首位时，gRPC可用，trojan部分客户端可用【客户端支持手动选择alpn的可用】"
    echoContent yellow "  3.如客户端不支持手动更换alpn，建议使用此功能更改服务端alpn顺序，来使用相应的协议"
    echoContent red "=============================================================="

    if [[ "${currentAlpn}" == "http/1.1" ]]; then
        echoContent yellow "1.切换alpn h2 首位"
    elif [[ "${currentAlpn}" == "h2" ]]; then
        echoContent yellow "1.切换alpn http/1.1 首位"
    else
        echoContent red '不符合'
    fi

    echoContent red "=============================================================="

    read -r -p "请选择:" selectSwitchAlpnType
    if [[ "${selectSwitchAlpnType}" == "1" && "${currentAlpn}" == "http/1.1" ]]; then

        local frontingTypeJSON
        frontingTypeJSON=$(jq -r ".inbounds[0].streamSettings.tlsSettings.alpn = [\"h2\",\"http/1.1\"]" ${configPath}${frontingType}.json)
        echo "${frontingTypeJSON}" | jq . >${configPath}${frontingType}.json

    elif [[ "${selectSwitchAlpnType}" == "1" && "${currentAlpn}" == "h2" ]]; then
        local frontingTypeJSON
        frontingTypeJSON=$(jq -r ".inbounds[0].streamSettings.tlsSettings.alpn =[\"http/1.1\",\"h2\"]" ${configPath}${frontingType}.json)
        echo "${frontingTypeJSON}" | jq . >${configPath}${frontingType}.json
    else
        echoContent red " ---> 选择错误"
        exit 0
    fi
    reloadCore
}

# hysteria管理
manageHysteria() {

    echoContent skyBlue "\n进度  1/1 : Hysteria管理"
    echoContent red "\n=============================================================="
    local hysteriaStatus=
    if [[ -n "${hysteriaConfigPath}" ]]; then
        echoContent yellow "1.重新安装"
        echoContent yellow "2.卸载"
        echoContent yellow "3.更新core"
        echoContent yellow "4.查看日志"
        hysteriaStatus=true
    else
        echoContent yellow "1.安装"
    fi

    echoContent red "=============================================================="
    read -r -p "请选择:" installHysteriaStatus
    if [[ "${installHysteriaStatus}" == "1" ]]; then
        hysteriaCoreInstall
    elif [[ "${installHysteriaStatus}" == "2" && "${hysteriaStatus}" == "true" ]]; then
        unInstallHysteriaCore
    elif [[ "${installHysteriaStatus}" == "3" && "${hysteriaStatus}" == "true" ]]; then
        installHysteria 1
        handleHysteria start
    elif [[ "${installHysteriaStatus}" == "4" && "${hysteriaStatus}" == "true" ]]; then
        journalctl -fu hysteria
    fi
}
# 主菜单
menu() {
    cd "$HOME" || exit
    echoContent red "\n=============================================================="
    echoContent green "作者:mack-a"
    echoContent green "当前版本:v2.6.25"
    echoContent green "Github:https://github.com/mack-a/v2ray-agent"
    echoContent green "描述:八合一共存脚本\c"
    showInstallStatus
    echoContent red "\n=============================================================="
    echoContent red "                        推广区                      "
    echoContent green "AFF捐赠：https://github.com/mack-a/v2ray-agent/blob/master/documents/donation_aff.md\n"
    echoContent red "=============================================================="
    if [[ -n "${coreInstallType}" ]]; then
        echoContent yellow "1.重新安装"
    else
        echoContent yellow "1.安装"
    fi

    echoContent yellow "2.任意组合安装"
    if echo ${currentInstallProtocolType} | grep -q trojan; then
        echoContent yellow "3.切换VLESS[XTLS]"
    elif echo ${currentInstallProtocolType} | grep -q 0; then
        echoContent yellow "3.切换Trojan[XTLS]"
    fi

    echoContent yellow "4.Hysteria管理"
    echoContent skyBlue "-------------------------工具管理-----------------------------"
    echoContent yellow "5.账号管理"
    echoContent yellow "6.更换伪装站"
    echoContent yellow "7.更新证书"
    echoContent yellow "8.更换CDN节点"
    echoContent yellow "9.IPv6分流"
    echoContent yellow "10.WARP分流"
    echoContent yellow "11.流媒体工具"
    echoContent yellow "12.添加新端口"
    echoContent yellow "13.BT下载管理"
    echoContent yellow "14.切换alpn"
    echoContent yellow "15.域名黑名单"
    echoContent skyBlue "-------------------------版本管理-----------------------------"
    echoContent yellow "16.core管理"
    echoContent yellow "17.更新脚本"
    echoContent yellow "18.安装BBR、DD脚本"
    echoContent skyBlue "-------------------------脚本管理-----------------------------"
    echoContent yellow "19.查看日志"
    echoContent yellow "20.卸载脚本"
    echoContent red "=============================================================="
    mkdirTools
    aliasInstall
    read -r -p "请选择:" selectInstallType
    case ${selectInstallType} in
    1)
        selectCoreInstall
        ;;
    2)
        selectCoreInstall
        ;;
    3)
        initXrayFrontingConfig 1
        ;;
    4)
        manageHysteria
        ;;
    5)
        manageAccount 1
        ;;
    6)
        updateNginxBlog 1
        ;;
    7)
        renewalTLS 1
        ;;
    8)
        updateV2RayCDN 1
        ;;
    9)
        ipv6Routing 1
        ;;
    10)
        warpRouting 1
        ;;
    11)
        streamingToolbox 1
        ;;
    12)
        addCorePort 1
        ;;
    13)
        btTools 1
        ;;
    14)
        switchAlpn 1
        ;;
    15)
        blacklist 1
        ;;
    16)
        coreVersionManageMenu 1
        ;;
    17)
        updateV2RayAgent 1
        ;;
    18)
        bbrInstall
        ;;
    19)
        checkLog 1
        ;;
    20)
        unInstall 1
        ;;
    esac
}
cronRenewTLS
menu