Skip to content

Latest commit

 

History

History
86 lines (58 loc) · 3.76 KB

README.md

File metadata and controls

86 lines (58 loc) · 3.76 KB
Raw

IoT Weather Station

IoT weather station based in ESP8266.

nextionDebugg

The proyect is composed by the following parts:

  • 3 x Wemos D1 Mini
  • 1 x bme280
  • 1 x dsb18b20
  • 1 x Nextion Display
  • 1 x Raspberry Pi 4 4GB
  • 1 x external SSD

We will sense the following variables :

  • temperature (ºC)
  • relative humidty (%)
  • pressure (Pa)

The data will be managed by IOTStack (https://github.com/SensorsIot/IOTstack) services but concretelly i choose the following :

  • Node-RED: For easy connection between hardware devices and software platforms
  • InfluxDB: Time series database
  • Mosquitto: MQTT server
  • Grafana : Analytics and interactive visualization web app

Aditonally the data is displayed on a Nextion Display (Tested on Nextion Basic Display NX4827T043 ) in which OpenWeather meteorological data such as wind speed, min-max temperatures and weather type is also included.

nextionDebugg

The files for the 3D case can be found in /3D folder.

Config

Arduino Libraries

Raspberry pi set-up

Credentials

The following constants are located in Arduino/libraries/myConfig/myConfig.h, you must define yours ;).

#define WIFI_SSID "WIFI_SSID"
#define WIFI_PASSWORD "WIFI_PASSWORD"

#define MQTT_USER "MQTT_USER"
#define MQTT_PASS "MQTT_PASS"
#define MQTT_HOST_1 192
#define MQTT_HOST_2 168
#define MQTT_HOST_3 12
#define MQTT_HOST_4 103
#define MQTT_HOST_ "192.168.12.103"
#define MQTT_PORT 1883

#define OpenWeatherAPIKEY "APIKEY"

Usefull tips

  • When uploading the OW2nextion.ino to the microcontroller disconnect all the nextion display wires (RX,TX), so that only the microUSB cable remains connected. Once finished reconnect then and reset the board to begin the comunication with the display.

  • Its safer to upload the .HMI files to the nextion display using a USB-to-TTL interface than using the microSD because of the poor quality of the nextion microSD slot. The uploading process using the microSD requires multiple insertions for each update thus increasing the possibility of damaging the slot.

  • Save your money and stuck with an basic nextion display unless you really need the bigger sizes (> 7.0"), in that case go for the 'intelligent hmi display' series. Most of the premium 'intelligent display' capabilites like transparent images can be handled with tricks like cropped images.

  • For the following Arduino IDE exception [Errno 13] pemission denied: '/dev/ttyUSB0' does not exist or your board is not connected run sudo chmod a+rw /dev/ttyUSB0

Useful links