diff --git a/.github/FUNDING.yml b/.github/FUNDING.yml new file mode 100644 index 0000000000..262a9ee4be --- /dev/null +++ b/.github/FUNDING.yml @@ -0,0 +1 @@ +github: meshcore-dev diff --git a/.github/workflows/build-all-firmwares.yml b/.github/workflows/build-all-firmwares.yml new file mode 100644 index 0000000000..d5b41cfbec --- /dev/null +++ b/.github/workflows/build-all-firmwares.yml @@ -0,0 +1,53 @@ +name: Build All Firmwares + +permissions: + contents: write + +on: + workflow_dispatch: + push: + branches: + - main-m5stack-unit-c6l + tags: + - 'all-*' + +jobs: + + build: + runs-on: ubuntu-latest + steps: + + - name: Clone Repo + uses: actions/checkout@v4 + + - name: Setup Build Environment + uses: ./.github/actions/setup-build-environment + + - name: Set FIRMWARE_VERSION for tag push + if: github.ref_type == 'tag' + run: | + GIT_TAG_NAME="${GITHUB_REF#refs/tags/}" + echo "FIRMWARE_VERSION=${GIT_TAG_NAME##*-}" >> $GITHUB_ENV + + - name: Set FIRMWARE_VERSION for branch push + if: github.ref_type != 'tag' + run: | + echo "FIRMWARE_VERSION=$(git rev-parse --short HEAD)" >> $GITHUB_ENV + + - name: Build All Firmwares + run: /usr/bin/env bash build.sh build-firmwares + + - name: Upload Workflow Artifacts + uses: actions/upload-artifact@v4 + with: + name: all-firmwares + path: out + + - name: Create Release + uses: softprops/action-gh-release@v2 + if: startsWith(github.ref, 'refs/tags/') + with: + name: All Firmwares ${{ env.FIRMWARE_VERSION }} + body: "" + draft: true + files: out/* diff --git a/.github/workflows/build-companion-firmwares.yml b/.github/workflows/build-companion-firmwares.yml deleted file mode 100644 index 721076a175..0000000000 --- a/.github/workflows/build-companion-firmwares.yml +++ /dev/null @@ -1,42 +0,0 @@ -name: Build Companion Firmwares - -permissions: - contents: write - -on: - workflow_dispatch: - push: - tags: - - 'companion-*' - -jobs: - - build: - runs-on: ubuntu-latest - steps: - - - name: Clone Repo - uses: actions/checkout@v4 - - - name: Setup Build Environment - uses: ./.github/actions/setup-build-environment - - - name: Build Firmwares - env: - FIRMWARE_VERSION: ${{ env.GIT_TAG_VERSION }} - run: /usr/bin/env bash build.sh build-companion-firmwares - - - name: Upload Workflow Artifacts - uses: actions/upload-artifact@v4 - with: - name: companion-firmwares - path: out - - - name: Create Release - uses: softprops/action-gh-release@v2 - if: startsWith(github.ref, 'refs/tags/') - with: - name: Companion Firmware ${{ env.GIT_TAG_VERSION }} - body: "" - draft: true - files: out/* \ No newline at end of file diff --git a/.github/workflows/build-m5stack-c6l-firmwares.yml b/.github/workflows/build-m5stack-c6l-firmwares.yml new file mode 100644 index 0000000000..845df9bb77 --- /dev/null +++ b/.github/workflows/build-m5stack-c6l-firmwares.yml @@ -0,0 +1,69 @@ +name: Build M5Stack C6L Firmwares + +permissions: + contents: write + +on: + workflow_dispatch: + push: + branches: + - main-m5stack-unit-c6l + tags: + - 'c6l-v*' + +jobs: + build: + runs-on: ubuntu-latest + steps: + - uses: actions/checkout@v4 + + - uses: ./.github/actions/setup-build-environment + + - name: Set FIRMWARE_VERSION for tag push + if: github.ref_type == 'tag' + run: | + GIT_TAG_NAME="${GITHUB_REF#refs/tags/}" + echo "FIRMWARE_VERSION=${GIT_TAG_NAME##*-}" >> $GITHUB_ENV + + - name: Set FIRMWARE_VERSION for branch push + if: github.ref_type != 'tag' + run: | + echo "FIRMWARE_VERSION=$(git rev-parse --short HEAD)" >> $GITHUB_ENV + + - name: Build all C6L firmwares + run: | + mkdir -p out + for env in m5stack_unit_c6l_companion_radio_usb m5stack_unit_c6l_companion_radio_ble m5stack_unit_c6l_repeater m5stack_unit_c6l_room_server + do + echo "=== Building $env ===" + pio run -e "$env" + + # Run mergebin to generate bootloader, partitions, and merged binary + pio run -t mergebin -e "$env" + + # Copy individual files + cp .pio/build/"$env"/firmware.bin out/"$env"_0x10000.bin + cp .pio/build/"$env"/bootloader.bin out/"$env"_bootloader_0x0.bin + cp .pio/build/"$env"/partitions.bin out/"$env"_partitions_0x8000.bin + + # Copy the merged binary produced by platformio (uses --chip esp32c6 correctly) + cp .pio/build/"$env"/firmware-merged.bin out/"$env"-"$FIRMWARE_VERSION"-merged.bin + done + + - name: List artifacts + run: ls -la out/ + + - name: Upload Artifacts + uses: actions/upload-artifact@v4 + with: + name: m5stack-c6l-firmwares + path: out/*.bin + + - name: Create Release + uses: softprops/action-gh-release@v2 + if: github.ref_type == 'tag' + with: + name: M5Stack C6L Firmware ${{ env.FIRMWARE_VERSION }} + body: "" + draft: true + files: out/*.bin diff --git a/.github/workflows/build-repeater-firmwares.yml b/.github/workflows/build-repeater-firmwares.yml deleted file mode 100644 index f12bd82949..0000000000 --- a/.github/workflows/build-repeater-firmwares.yml +++ /dev/null @@ -1,42 +0,0 @@ -name: Build Repeater Firmwares - -permissions: - contents: write - -on: - workflow_dispatch: - push: - tags: - - 'repeater-*' - -jobs: - - build: - runs-on: ubuntu-latest - steps: - - - name: Clone Repo - uses: actions/checkout@v4 - - - name: Setup Build Environment - uses: ./.github/actions/setup-build-environment - - - name: Build Firmwares - env: - FIRMWARE_VERSION: ${{ env.GIT_TAG_VERSION }} - run: /usr/bin/env bash build.sh build-repeater-firmwares - - - name: Upload Workflow Artifacts - uses: actions/upload-artifact@v4 - with: - name: repeater-firmwares - path: out - - - name: Create Release - uses: softprops/action-gh-release@v2 - if: startsWith(github.ref, 'refs/tags/') - with: - name: Repeater Firmware ${{ env.GIT_TAG_VERSION }} - body: "" - draft: true - files: out/* \ No newline at end of file diff --git a/.github/workflows/build-room-server-firmwares.yml b/.github/workflows/build-room-server-firmwares.yml deleted file mode 100644 index a488af6a1c..0000000000 --- a/.github/workflows/build-room-server-firmwares.yml +++ /dev/null @@ -1,42 +0,0 @@ -name: Build Room Server Firmwares - -permissions: - contents: write - -on: - workflow_dispatch: - push: - tags: - - 'room-server-*' - -jobs: - - build: - runs-on: ubuntu-latest - steps: - - - name: Clone Repo - uses: actions/checkout@v4 - - - name: Setup Build Environment - uses: ./.github/actions/setup-build-environment - - - name: Build Firmwares - env: - FIRMWARE_VERSION: ${{ env.GIT_TAG_VERSION }} - run: /usr/bin/env bash build.sh build-room-server-firmwares - - - name: Upload Workflow Artifacts - uses: actions/upload-artifact@v4 - with: - name: room-server-firmwares - path: out - - - name: Create Release - uses: softprops/action-gh-release@v2 - if: startsWith(github.ref, 'refs/tags/') - with: - name: Room Server Firmware ${{ env.GIT_TAG_VERSION }} - body: "" - draft: true - files: out/* \ No newline at end of file diff --git a/.github/workflows/github-pages.yml b/.github/workflows/github-pages.yml index d50a044c5b..5fd2734bfd 100644 --- a/.github/workflows/github-pages.yml +++ b/.github/workflows/github-pages.yml @@ -31,6 +31,6 @@ jobs: uses: peaceiris/actions-gh-pages@v3 with: github_token: ${{ secrets.GITHUB_TOKEN }} - cname: docs.meshcore.nz + cname: docs.meshcore.io publish_dir: ./site publish_branch: 'gh-pages' diff --git a/.gitignore b/.gitignore index 50631d890c..a0ad5f6ea9 100644 --- a/.gitignore +++ b/.gitignore @@ -16,3 +16,4 @@ cmake-* compile_commands.json .venv/ venv/ +platformio.local.ini diff --git a/README.md b/README.md index 3a671f0b3a..d5f2a16ff9 100644 --- a/README.md +++ b/README.md @@ -28,8 +28,9 @@ MeshCore provides the ability to create wireless mesh networks, similar to Mesht ## 🚀 How to Get Started -- Watch the [MeshCore Intro Video](https://www.youtube.com/watch?v=t1qne8uJBAc) by Andy Kirby. -- Read through our [Frequently Asked Questions](./docs/faq.md) section. +- Watch the [MeshCore QuickStart Playlist](https://www.youtube.com/watch?v=iaFltojJrAc&list=PLshzThxhw4O4WU_iZo3NmNZOv6KMrUuF9) by The Comms Channel +- Watch the [MeshCore Technical Presentation](https://www.youtube.com/watch?v=OwmkVkZQTf4) by Liam Cottle. +- Read through our [Frequently Asked Questions](./docs/faq.md) and [Documentation](https://docs.meshcore.io). - Flash the MeshCore firmware on a supported device. - Connect with a supported client. @@ -51,7 +52,7 @@ The Simple Secure Chat example can be interacted with through the Serial Monitor We have prebuilt firmware ready to flash on supported devices. -- Launch https://flasher.meshcore.co.uk +- Launch https://meshcore.io/flasher - Select a supported device - Flash one of the firmware types: - Companion, Repeater or Room Server @@ -73,13 +74,13 @@ The companion firmware can be connected to via BLE, USB or WiFi depending on the The repeater and room server firmwares can be setup via USB in the web config tool. -- https://config.meshcore.dev +- https://config.meshcore.io They can also be managed via LoRa in the mobile app by using the Remote Management feature. ## 🛠 Hardware Compatibility -MeshCore is designed for devices listed in the [MeshCore Flasher](https://flasher.meshcore.co.uk) +MeshCore is designed for devices listed in the [MeshCore Flasher](https://meshcore.io/flasher) ## 📜 License @@ -116,4 +117,4 @@ There are a number of fairly major features in the pipeline, with no particular - Report bugs and request features on the [GitHub Issues](https://github.com/ripplebiz/MeshCore/issues) page. - Find additional guides and components on [my site](https://buymeacoffee.com/ripplebiz). -- Join [MeshCore Discord](https://discord.gg/BMwCtwHj5V) to chat with the developers and get help from the community. +- Join [MeshCore Discord](https://meshcore.gg) to chat with the developers and get help from the community. diff --git a/arch/esp32/AsyncElegantOTA/src/AsyncElegantOTA.h b/arch/esp32/AsyncElegantOTA/src/AsyncElegantOTA.h index afae3f91ac..219d11029e 100644 --- a/arch/esp32/AsyncElegantOTA/src/AsyncElegantOTA.h +++ b/arch/esp32/AsyncElegantOTA/src/AsyncElegantOTA.h @@ -15,8 +15,6 @@ #include "WiFi.h" #include "AsyncTCP.h" #include "Update.h" - #include "esp_int_wdt.h" - #include "esp_task_wdt.h" #endif #include "Hash.h" diff --git a/docs/_assets/meshcore.svg b/docs/_assets/meshcore.svg new file mode 100644 index 0000000000..eb1b7bc41e --- /dev/null +++ b/docs/_assets/meshcore.svg @@ -0,0 +1,12 @@ + + + + + + + + + + + + diff --git a/docs/cli_commands.md b/docs/cli_commands.md index 9769d71334..99dced3658 100644 --- a/docs/cli_commands.md +++ b/docs/cli_commands.md @@ -102,7 +102,9 @@ This document provides an overview of CLI commands that can be sent to MeshCore - `neighbor.remove ` **Parameters:** -- `pubkey_prefix`: The public key of the node to remove from the neighbors list +- `pubkey_prefix`: The public key of the node to remove from the neighbors list. This can be a short prefix or the full key. All neighbors matching the provided prefix will be removed. + +**Note:** You can remove all neighbors by sending a space character as the prefix. The space indicates an empty prefix, which matches all existing neighbors. --- @@ -217,6 +219,20 @@ This document provides an overview of CLI commands that can be sent to MeshCore --- +#### View or change the boosted receive gain mode +**Usage:** +- `get radio.rxgain` +- `set radio.rxgain ` + +**Parameters:** +- `state`: `on`|`off` + +**Default:** `off` + +**Note:** Only available on SX1262 and SX1268 based boards. + +--- + #### Change the radio parameters for a set duration **Usage:** - `tempradio ,,,,` @@ -389,6 +405,11 @@ This document provides an overview of CLI commands that can be sent to MeshCore --- +#### View this node's firmware version +**Usage:** `ver` + +--- + #### View this node's configured role **Usage:** `get role` @@ -500,7 +521,29 @@ This document provides an overview of CLI commands that can be sent to MeshCore --- +#### View or change the duty cycle limit +**Usage:** +- `get dutycycle` +- `set dutycycle ` + +**Parameters:** +- `value`: Duty cycle percentage (1-100) + +**Default:** `50%` (equivalent to airtime factor 1.0) + +**Examples:** +- `set dutycycle 100` — no duty cycle limit +- `set dutycycle 50` — 50% duty cycle (default) +- `set dutycycle 10` — 10% duty cycle +- `set dutycycle 1` — 1% duty cycle (strictest EU requirement) + +> **Note:** Added in firmware v1.15.0 + +--- + #### View or change the airtime factor (duty cycle limit) +> **Deprecated** as of firmware v1.15.0. Use [`get/set dutycycle`](#view-or-change-the-duty-cycle-limit) instead. + **Usage:** - `get af` - `set af ` @@ -510,8 +553,8 @@ This document provides an overview of CLI commands that can be sent to MeshCore - `af = 1` → ~50% duty - `af = 2` → ~33% duty - `af = 3` → ~25% duty - - `af = 9` → ~10% duty - Yyou are responsible for choosing a value that is appropriate for your jurisdiction and channel plan (for example EU 868 Mhz 10% duty cycle regulation). + - `af = 9` → ~10% duty + You are responsible for choosing a value that is appropriate for your jurisdiction and channel plan (for example EU 868 Mhz 10% duty cycle regulation). **Default:** `1.0` @@ -535,7 +578,7 @@ This document provides an overview of CLI commands that can be sent to MeshCore - `set agc.reset.interval ` **Parameters:** -- `value`: Interval in seconds rounded down to a multiple of 4 (17 becomes 16) +- `value`: Interval in seconds rounded down to a multiple of 4 (17 becomes 16). 0 to disable. **Default:** `0.0` @@ -692,6 +735,16 @@ This document provides an overview of CLI commands that can be sent to MeshCore --- +#### View or change the default scope region for this node +**Usage:** +- `region default` +- `region default {name|}` + +**Parameters:** +- `name`: Region name, or to reset/clear + +--- + #### Create a new region **Usage:** - `region put [parent_name]` @@ -834,7 +887,9 @@ region save **Default:** `off` -**Note:** Output format: `{status}, {fix}, {sat count}` (when enabled) +**Note:** Output format: +- `off` when the GPS hardware is disabled +- `on, {active|deactivated}, {fix|no fix}, {sat count} sats` when the GPS hardware is enabled --- diff --git a/docs/faq.md b/docs/faq.md index 560e3f629b..0efe96103c 100644 --- a/docs/faq.md +++ b/docs/faq.md @@ -2,107 +2,93 @@ A list of frequently-asked questions and answers for MeshCore -- [1. Introduction](#1-introduction) - - [1.1. Q: What is MeshCore?](#11-q-what-is-meshcore) - - [1.2. Q: What do you need to start using MeshCore?](#12-q-what-do-you-need-to-start-using-meshcore) - - [1.2.1. Hardware](#121-hardware) - - [1.2.2. Firmware](#122-firmware) - - [1.2.3. Companion Radio Firmware](#123-companion-radio-firmware) - - [1.2.4. Repeater](#124-repeater) - - [1.2.5. Room Server](#125-room-server) -- [2. Initial Setup](#2-initial-setup) - - [2.1. Q: How many devices do I need to start using MeshCore?](#21-q-how-many-devices-do-i-need-to-start-using-meshcore) - - [2.2. Q: Does MeshCore cost any money?](#22-q-does-meshcore-cost-any-money) - - [2.3. Q: What frequencies are supported by MeshCore?](#23-q-what-frequencies-are-supported-by-meshcore) - - [2.4. Q: What is an "advert" in MeshCore?](#24-q-what-is-an-advert-in-meshcore) - - [2.5. Q: Is there a hop limit?](#25-q-is-there-a-hop-limit) -- [3. Server Administration](#3-server-administration) - - [3.1. Q: How do you configure a repeater or a room server?](#31-q-how-do-you-configure-a-repeater-or-a-room-server) - - [3.2. Q: Do I need to set the location for a repeater?](#32-q-do-i-need-to-set-the-location-for-a-repeater) - - [3.3. Q: What is the password to administer a repeater or a room server?](#33-q-what-is-the-password-to-administer-a-repeater-or-a-room-server) - - [3.4. Q: What is the password to join a room server?](#34-q-what-is-the-password-to-join-a-room-server) - - [3.5. Q: Can I retrieve a repeater's private key or set a repeater's private key?](#35-q-can-i-retrieve-a-repeaters-private-key-or-set-a-repeaters-private-key) - - [3.6. Q: The first byte of my repeater's public key collides with an exisitng repeater on the mesh. How do I get a new private key with a matching public key that has its first byte of my choosing?](#36-q-the-first-byte-of-my-repeaters-public-key-collides-with-an-exisitng-repeater-on-the-mesh--how-do-i-get-a-new-private-key-with-a-matching-public-key-that-has-its-first-byte-of-my-choosing) - - [3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do?](#37-q-my-repeater-maybe-suffering-from-deafness-due-to-high-power-interference-near-my-meshs-frequency-it-is-not-hearing-other-in-range-meshcore-radios--what-can-i-do) - - [3.8. Q: How do I make my repeater an observer on the mesh?](#38-q-how-do-i-make-my-repeater-an-observer-on-the-mesh) -- [4. T-Deck Related](#4-t-deck-related) - - [4.1. Q: Is there a user guide for T-Deck, T-Pager, T-Watch, or T-Display Pro?](#41-q-is-there-a-user-guide-for-t-deck-t-pager-t-watch-or-t-display-pro) - - [4.2. Q: What are the steps to get a T-Deck into DFU (Device Firmware Update) mode?](#42-q-what-are-the-steps-to-get-a-t-deck-into-dfu-device-firmware-update-mode) - - [4.3. Q: Why is my T-Deck Plus not getting any satellite lock?](#43-q-why-is-my-t-deck-plus-not-getting-any-satellite-lock) - - [4.4. Q: Why is my OG (non-Plus) T-Deck not getting any satellite lock?](#44-q-why-is-my-og-non-plus-t-deck-not-getting-any-satellite-lock) - - [4.5. Q: What size of SD card does the T-Deck support?](#45-q-what-size-of-sd-card-does-the-t-deck-support) - - [4.6. Q: what is the public key for the default public channel?](#46-q-what-is-the-public-key-for-the-default-public-channel) - - [4.7. Q: How do I get maps on T-Deck?](#47-q-how-do-i-get-maps-on-t-deck) - - [4.8. Q: Where do the map tiles go?](#48-q-where-do-the-map-tiles-go) - - [4.9. Q: How to unlock deeper map zoom and server management features on T-Deck?](#49-q-how-to-unlock-deeper-map-zoom-and-server-management-features-on-t-deck) - - [4.10. Q: How to decipher the diagnostics screen on T-Deck?](#410-q-how-to-decipher-the-diagnostics-screen-on-t-deck) - - [4.11. Q: The T-Deck sound is too loud?](#411-q-the-t-deck-sound-is-too-loud) - - [4.12. Q: Can you customize the sound?](#412-q-can-you-customize-the-sound) - - [4.13. Q: What is the 'Import from Clipboard' feature on the t-deck and is there a way to manually add nodes without having to receive adverts?](#413-q-what-is-the-import-from-clipboard-feature-on-the-t-deck-and-is-there-a-way-to-manually-add-nodes-without-having-to-receive-adverts) - - [4.14. Q: How to capture a screenshot on T-Deck?](#414-q-how-to-capture-a-screenshot-on-t-deck) -- [5. General](#5-general) - - [5.1. Q: What are BW, SF, and CR?](#51-q-what-are-bw-sf-and-cr) - - [5.2. Q: Do MeshCore clients repeat?](#52-q-do-meshcore-clients-repeat) - - [5.3. Q: What happens when a node learns a route via a mobile repeater, and that repeater is gone?](#53-q-what-happens-when-a-node-learns-a-route-via-a-mobile-repeater-and-that-repeater-is-gone) - - [5.4. Q: How does a node discovery a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic?](#54-q-how-does-a-node-discovery-a-path-to-its-destination-and-then-use-it-to-send-messages-in-the-future-instead-of-flooding-every-message-it-sends-like-meshtastic) - - [5.5. Q: Do public channels always flood? Do private channels always flood?](#55-q-do-public-channels-always-flood-do-private-channels-always-flood) - - [5.6. Q: what is the public key for the default public channel?](#56-q-what-is-the-public-key-for-the-default-public-channel) - - [5.7. Q: Is MeshCore open source?](#57-q-is-meshcore-open-source) - - [5.8. Q: How can I support MeshCore?](#58-q-how-can-i-support-meshcore) - - [5.9. Q: How do I build MeshCore firmware from source?](#59-q-how-do-i-build-meshcore-firmware-from-source) - - [5.10. Q: Are there other MeshCore related open source projects?](#510-q-are-there-other-meshcore-related-open-source-projects) - - [5.11. Q: Does MeshCore support ATAK](#511-q-does-meshcore-support-atak) - - [5.12. Q: How do I add a node to the MeshCore Map](#512-q-how-do-i-add-a-node-to-the-meshcore-map) - - [5.13. Q: Can I use a Raspberry Pi to update a MeshCore radio?](#513-q-can-i-use-a-raspberry-pi-to-update-a-meshcore-radio) - - [5.14. Q: Are there are projects built around MeshCore?](#514-q-are-there-are-projects-built-around-meshcore) - - [5.14.1. overview](#5141-overview) - - [5.14.1.1. awesome-meshcore](#51411-awesome-meshcore) - - [5.14.2. programming libraries, command line software](#5142-programming-libraries-command-line-software) - - [5.14.2.1. meshcoremqtt](#51421-meshcoremqtt) - - [5.14.2.2. MeshCore for Home Assistant](#51422-meshcore-for-home-assistant) - - [5.14.2.3. Python MeshCore](#51423-python-meshcore) - - [5.14.2.4. meshcore-cli](#51424-meshcore-cli) - - [5.14.2.5. meshcore.js](#51425-meshcorejs) - - [5.14.2.6. pyMC\_core](#51426-pymc_core) - - [5.14.2.7. MeshCore Packet Decoder](#51427-meshcore-packet-decoder) - - [5.14.2.8. meshcore-pi](#51428-meshcore-pi) - - [5.14.2.9. pyMC\_Repeater](#51429-pymc_repeater) - - [5.14.2.10. MeshCore map auto uploader](#514210-MeshCore-map-auto-uploader) - - [5.14.3. apps, graphical software](#5143-apps-graphical-software) - - [5.14.3.1. meshcore-open](#51431-meshcore-open) - - [5.14.4. firmwares](#5144-firmwares) - - [5.14.4.1. MeshCore-Cardputer-ADV](#51441-MeshCore-Cardputer-ADV) - - [5.14.4.2. LunarCore](#51442-LunarCore) - - [5.14.4.3. MC-Term](#51443-MC-Term) - - [5.14.4.4. Meck](#51444-Meck) - - [5.14.4.5. Meshcore for Wio Tracker L1 Pro](#51445-Meshcore-for-Wio-Tracker-L1-Pro) - - [5.14.5. online services](#5145-online-services) - - [5.15. Q: Are there client applications for Windows or Mac?](#515-q-are-there-client-applications-for-windows-or-mac) - - [5.16. Q: Are there any resources that compare MeshCore to other LoRa systems?](#516-q-are-there-any-resources-that-compare-meshcore-to-other-lora-systems) -- [6. Troubleshooting](#6-troubleshooting) - - [6.1. Q: My client says another client or a repeater or a room server was last seen many, many days ago.](#61-q-my-client-says-another-client-or-a-repeater-or-a-room-server-was-last-seen-many-many-days-ago) - - [6.2. Q: A repeater or a client or a room server I expect to see on my discover list (on T-Deck) or contact list (on a smart device client) are not listed.](#62-q-a-repeater-or-a-client-or-a-room-server-i-expect-to-see-on-my-discover-list-on-t-deck-or-contact-list-on-a-smart-device-client-are-not-listed) - - [6.3. Q: How to connect to a repeater via BLE (Bluetooth)?](#63-q-how-to-connect-to-a-repeater-via-ble-bluetooth) - - [6.4. Q: My companion isn't showing up over Bluetooth?](#64-q-my-companion-isnt-showing-up-over-bluetooth) - - [6.5. Q: I can't connect via Bluetooth, what is the Bluetooth pairing code?](#65-q-i-cant-connect-via-bluetooth-what-is-the-bluetooth-pairing-code) - - [6.6. Q: My Heltec V3 keeps disconnecting from my smartphone. It can't hold a solid Bluetooth connection.](#66-q-my-heltec-v3-keeps-disconnecting-from-my-smartphone--it-cant-hold-a-solid-bluetooth-connection) - - [6.7. Q: My RAK/T1000-E/xiao\_nRF52 device seems to be corrupted, how do I wipe it clean to start fresh?](#67-q-my-rakt1000-exiao_nrf52-device-seems-to-be-corrupted-how-do-i-wipe-it-clean-to-start-fresh) - - [6.8. Q: WebFlasher fails on Linux with failed to open](#68-q-webflasher-fails-on-linux-with-failed-to-open) -- [7. Other Questions:](#7-other-questions) - - [7.1. Q: How to update nRF (RAK, T114, Seed XIAO) repeater and room server firmware over the air using the new simpler DFU app?](#71-q-how-to-update-nrf-rak-t114-seed-xiao-repeater-and-room-server-firmware-over-the-air-using-the-new-simpler-dfu-app) - - [7.1.1 Q: Can I update Seeed Studio Wio Tracker L1 Pro using OTA?](#711-q-can-i-update-seeed-studio-wio-tracker-l1-pro-using-ota) - - [7.2. Q: How to update ESP32-based devices over the air?](#72-q-how-to-update-esp32-based-devices-over-the-air) - - [7.3. Q: Is there a way to lower the chance of a failed OTA device firmware update (DFU)?](#73-q-is-there-a-way-to-lower-the-chance-of-a-failed-ota-device-firmware-update-dfu) - - [7.4. Q: are the MeshCore logo and font available?](#74-q-are-the-meshcore-logo-and-font-available) - - [7.5. Q: What is the format of a contact or channel QR code?](#75-q-what-is-the-format-of-a-contact-or-channel-qr-code) - - [7.6. Q: How do I connect to the companion via WIFI, e.g. using a heltec v3?](#76-q-how-do-i-connect-to-the-companion-via-wifi-eg-using-a-heltec-v3) - - [7.7. Q: I have a Station G2, or a Heltec V4, or an Ikoka Stick, or a radio with a EByte E22-900M30S or a E22-900M33S module, what should their transmit power be set to?](#77-q-i-have-a-station-g2-or-a-heltec-v4-or-an-ikoka-stick-or-a-radio-with-a-ebyte-e22-900m30s-or-a-e22-900m33s-module-what-should-their-transmit-power-be-set-to) +- [Frequently Asked Questions](#frequently-asked-questions) + - [1. Introduction](#1-introduction) + - [1.1. Q: What is MeshCore?](#11-q-what-is-meshcore) + - [1.2. Q: What do you need to start using MeshCore?](#12-q-what-do-you-need-to-start-using-meshcore) + - [1.2.1. Hardware](#121-hardware) + - [1.2.2. Firmware](#122-firmware) + - [1.2.3. Companion Radio Firmware](#123-companion-radio-firmware) + - [1.2.4. Repeater](#124-repeater) + - [1.2.5. Room Server](#125-room-server) + - [2. Initial Setup](#2-initial-setup) + - [2.1. Q: How many devices do I need to start using MeshCore?](#21-q-how-many-devices-do-i-need-to-start-using-meshcore) + - [2.2. Q: Does MeshCore cost any money?](#22-q-does-meshcore-cost-any-money) + - [2.3. Q: What frequencies are supported by MeshCore?](#23-q-what-frequencies-are-supported-by-meshcore) + - [2.4. Q: What is an "advert" in MeshCore?](#24-q-what-is-an-advert-in-meshcore) + - [2.5. Q: Is there a hop limit?](#25-q-is-there-a-hop-limit) + - [3. Server Administration](#3-server-administration) + - [3.1. Q: How do you configure a repeater or a room server?](#31-q-how-do-you-configure-a-repeater-or-a-room-server) + - [3.2. Q: Do I need to set the location for a repeater?](#32-q-do-i-need-to-set-the-location-for-a-repeater) + - [3.3. Q: What is the password to administer a repeater or a room server?](#33-q-what-is-the-password-to-administer-a-repeater-or-a-room-server) + - [3.4. Q: What is the password to join a room server?](#34-q-what-is-the-password-to-join-a-room-server) + - [3.5. Q: Can I retrieve a repeater's private key or set a repeater's private key?](#35-q-can-i-retrieve-a-repeaters-private-key-or-set-a-repeaters-private-key) + - [3.6. Q: The first byte of my repeater's public key collides with an exisitng repeater on the mesh. How do I get a new private key with a matching public key that has its first byte of my choosing?](#36-q-the-first-byte-of-my-repeaters-public-key-collides-with-an-exisitng-repeater-on-the-mesh--how-do-i-get-a-new-private-key-with-a-matching-public-key-that-has-its-first-byte-of-my-choosing) + - [3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do?](#37-q-my-repeater-maybe-suffering-from-deafness-due-to-high-power-interference-near-my-meshs-frequency-it-is-not-hearing-other-in-range-meshcore-radios--what-can-i-do) + - [3.8. Q: How do I make my repeater an observer on the mesh?](#38-q-how-do-i-make-my-repeater-an-observer-on-the-mesh) + - [3.9. Q: What is multi-byte support? What do 1-byte, 2-byte, 3-byte adverts and messages mean?](#39-q-what-is-multi-byte-support--what-do-1-byte-2-byte-3-byte-adverts-and-messages-mean) + - [3.9.1. Q: **What path hash sizes will my repeater forward?**](#391-q-what-path-hash-sizes-will-my-repeater-forward) + - [3.9.2. Q: **What determines a packet's path hash size?**](#392-q-what-determines-a-packets-path-hash-size) + - [3.9.3. Q: **How do I change my companion's path hash size?**](#393-q-how-do-i-change-my-companions-path-hash-size) + - [3.9.4. Q: **What does the CLI command `path.hash.mode` do on a repeater?**](#394-q-what-does-the-cli-command-pathhashmode-do-on-a-repeater) + - [3.9.5. Q: **Why use 2- or 3-byte path hash for adverts?**](#395-q-why-use-2--or-3-byte-path-hash-for-adverts) + - [3.9.6. Q: **When can we move away from 1-byte path hash for channel and direct messages?**](#396-q-when-can-we-move-away-from-1-byte-path-hash-for-channel-and-direct-messages) + - [4. T-Deck Related](#4-t-deck-related) + - [4.1. Q: Is there a user guide for T-Deck, T-Pager, T-Watch, or T-Display Pro?](#41-q-is-there-a-user-guide-for-t-deck-t-pager-t-watch-or-t-display-pro) + - [4.2. Q: What are the steps to get a T-Deck into DFU (Device Firmware Update) mode?](#42-q-what-are-the-steps-to-get-a-t-deck-into-dfu-device-firmware-update-mode) + - [4.3. Q: Why is my T-Deck Plus not getting any satellite lock?](#43-q-why-is-my-t-deck-plus-not-getting-any-satellite-lock) + - [4.4. Q: Why is my OG (non-Plus) T-Deck not getting any satellite lock?](#44-q-why-is-my-og-non-plus-t-deck-not-getting-any-satellite-lock) + - [4.5. Q: What size of SD card does the T-Deck support?](#45-q-what-size-of-sd-card-does-the-t-deck-support) + - [4.6. Q: what is the public key for the default public channel?](#46-q-what-is-the-public-key-for-the-default-public-channel) + - [4.7. Q: How do I get maps on T-Deck?](#47-q-how-do-i-get-maps-on-t-deck) + - [4.8. Q: Where do the map tiles go?](#48-q-where-do-the-map-tiles-go) + - [4.9. Q: How to unlock deeper map zoom and server management features on T-Deck?](#49-q-how-to-unlock-deeper-map-zoom-and-server-management-features-on-t-deck) + - [4.10. Q: How to decipher the diagnostics screen on T-Deck?](#410-q-how-to-decipher-the-diagnostics-screen-on-t-deck) + - [4.11. Q: The T-Deck sound is too loud?](#411-q-the-t-deck-sound-is-too-loud) + - [4.12. Q: Can you customize the sound?](#412-q-can-you-customize-the-sound) + - [4.13. Q: What is the 'Import from Clipboard' feature on the t-deck and is there a way to manually add nodes without having to receive adverts?](#413-q-what-is-the-import-from-clipboard-feature-on-the-t-deck-and-is-there-a-way-to-manually-add-nodes-without-having-to-receive-adverts) + - [4.14. Q: How to capture a screenshot on T-Deck?](#414-q-how-to-capture-a-screenshot-on-t-deck) + - [5. General](#5-general) + - [5.1. Q: What are BW, SF, and CR?](#51-q-what-are-bw-sf-and-cr) + - [5.2. Q: Do MeshCore clients repeat?](#52-q-do-meshcore-clients-repeat) + - [5.3. Q: What happens when a node learns a route via a mobile repeater, and that repeater is gone?](#53-q-what-happens-when-a-node-learns-a-route-via-a-mobile-repeater-and-that-repeater-is-gone) + - [5.4. Q: How does a node discovery a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic?](#54-q-how-does-a-node-discovery-a-path-to-its-destination-and-then-use-it-to-send-messages-in-the-future-instead-of-flooding-every-message-it-sends-like-meshtastic) + - [5.5. Q: Do public channels always flood? Do private channels always flood?](#55-q-do-public-channels-always-flood-do-private-channels-always-flood) + - [5.6. Q: what is the public key for the default public channel?](#56-q-what-is-the-public-key-for-the-default-public-channel) + - [5.7. Q: Is MeshCore open source?](#57-q-is-meshcore-open-source) + - [5.8. Q: How can I support MeshCore?](#58-q-how-can-i-support-meshcore) + - [5.9. Q: How do I build MeshCore firmware from source?](#59-q-how-do-i-build-meshcore-firmware-from-source) + - [5.10. Q: Are there other MeshCore related open source projects?](#510-q-are-there-other-meshcore-related-open-source-projects) + - [5.11. Q: Does MeshCore support ATAK](#511-q-does-meshcore-support-atak) + - [5.12. Q: How do I add a node to the MeshCore Map](#512-q-how-do-i-add-a-node-to-the-meshcore-map) + - [5.13. Q: Can I use a Raspberry Pi to update a MeshCore radio?](#513-q-can-i-use-a-raspberry-pi-to-update-a-meshcore-radio) + - [5.14. Q: Are there are projects built around MeshCore?](#514-q-are-there-are-projects-built-around-meshcore) + - [5.15. Q: Are there client applications for Windows or Mac?](#515-q-are-there-client-applications-for-windows-or-mac) + - [5.16. Q: Are there any resources that compare MeshCore to other LoRa systems?](#516-q-are-there-any-resources-that-compare-meshcore-to-other-lora-systems) + - [6. Troubleshooting](#6-troubleshooting) + - [6.1. Q: My client says another client or a repeater or a room server was last seen many, many days ago.](#61-q-my-client-says-another-client-or-a-repeater-or-a-room-server-was-last-seen-many-many-days-ago) + - [6.2. Q: A repeater or a client or a room server I expect to see on my discover list (on T-Deck) or contact list (on a smart device client) are not listed.](#62-q-a-repeater-or-a-client-or-a-room-server-i-expect-to-see-on-my-discover-list-on-t-deck-or-contact-list-on-a-smart-device-client-are-not-listed) + - [6.3. Q: How to connect to a repeater via BLE (Bluetooth)?](#63-q-how-to-connect-to-a-repeater-via-ble-bluetooth) + - [6.4. Q: My companion isn't showing up over Bluetooth?](#64-q-my-companion-isnt-showing-up-over-bluetooth) + - [6.5. Q: I can't connect via Bluetooth, what is the Bluetooth pairing code?](#65-q-i-cant-connect-via-bluetooth-what-is-the-bluetooth-pairing-code) + - [6.6. Q: My Heltec V3 keeps disconnecting from my smartphone. It can't hold a solid Bluetooth connection.](#66-q-my-heltec-v3-keeps-disconnecting-from-my-smartphone--it-cant-hold-a-solid-bluetooth-connection) + - [6.7. Q: My RAK/T1000-E/xiao\_nRF52 device seems to be corrupted, how do I wipe it clean to start fresh?](#67-q-my-rakt1000-exiao_nrf52-device-seems-to-be-corrupted-how-do-i-wipe-it-clean-to-start-fresh) + - [6.8. Q: WebFlasher fails on Linux with failed to open](#68-q-webflasher-fails-on-linux-with-failed-to-open) + - [7. Other Questions:](#7-other-questions) + - [7.1. Q: How to update nRF (RAK, T114, Seed XIAO) repeater and room server firmware over the air using the new simpler DFU app?](#71-q-how-to-update-nrf-rak-t114-seed-xiao-repeater-and-room-server-firmware-over-the-air-using-the-new-simpler-dfu-app) + - [7.1.1 Q: Can I update Seeed Studio Wio Tracker L1 Pro using OTA?](#711-q-can-i-update-seeed-studio-wio-tracker-l1-pro-using-ota) + - [7.2. Q: How to update ESP32-based devices over the air?](#72-q-how-to-update-esp32-based-devices-over-the-air) + - [7.3. Q: Is there a way to lower the chance of a failed OTA device firmware update (DFU)?](#73-q-is-there-a-way-to-lower-the-chance-of-a-failed-ota-device-firmware-update-dfu) + - [7.4. Q: are the MeshCore logo and font available?](#74-q-are-the-meshcore-logo-and-font-available) + - [7.5. Q: What is the format of a contact or channel QR code?](#75-q-what-is-the-format-of-a-contact-or-channel-qr-code) + - [7.6. Q: How do I connect to the companion via WIFI, e.g. using a heltec v3?](#76-q-how-do-i-connect-to-the-companion-via-wifi-eg-using-a-heltec-v3) + - [7.7. Q: I have a Station G2, or a Heltec V4, or an Ikoka Stick, or a radio with a EByte E22-900M30S or a E22-900M33S module, what should their transmit power be set to?](#77-q-i-have-a-station-g2-or-a-heltec-v4-or-an-ikoka-stick-or-a-radio-with-a-ebyte-e22-900m30s-or-a-e22-900m33s-module-what-should-their-transmit-power-be-set-to) ## 1. Introduction ### 1.1. Q: What is MeshCore? -**A:** MeshCore is a multi platform system for enabling secure text based communications utilising LoRa radio hardware. It can be used for Off-Grid Communication, Emergency Response & Disaster Recovery, Outdoor Activities, Tactical Security including law enforcement and private security and also IoT sensor networks. ([source](https://meshcore.co.uk/)) +**A:** MeshCore is a multi platform system for enabling secure text based communications utilising LoRa radio hardware. It can be used for Off-Grid Communication, Emergency Response & Disaster Recovery, Outdoor Activities, Tactical Security including law enforcement and private security and also IoT sensor networks. ([source](https://meshcore.io/)) MeshCore is free and open source: * MeshCore is the routing and firmware etc, available on GitHub under MIT license @@ -120,19 +106,19 @@ Anyone is able to build anything they like on top of MeshCore without paying any ### 1.2. Q: What do you need to start using MeshCore? **A:** Everything you need for MeshCore is available at: -- Main web site: [https://meshcore.co.uk](https://meshcore.co.uk) -- Firmware Flasher: [https://flasher.meshcore.co.uk](https://flasher.meshcore.co.uk) +- Main Website: [https://meshcore.io](https://meshcore.io) +- Firmware Flasher: [https://flasher.meshcore.io](https://flasher.meshcore.io) - MeshCore Firmware on GitHub: [https://github.com/meshcore-dev/MeshCore](https://github.com/meshcore-dev/MeshCore) -- MeshCore Companion App: [https://meshcore.nz](https://meshcore.nz) -- MeshCore Map: [https://meshcore.co.uk/map.html](https://meshcore.co.uk/map.html) -- Andy Kirby has a very useful [intro video](https://www.youtube.com/watch?v=t1qne8uJBAc) for beginners. +- MeshCore Companion Web App: [https://app.meshcore.nz](https://app.meshcore.nz) +- MeshCore Map: [https://map.meshcore.io](https://map.meshcore.io) +- Liam Cottle's [MeshCore Technical Presentation](https://www.youtube.com/watch?v=OwmkVkZQTf4) You need LoRa hardware devices to run MeshCore firmware as clients or server (repeater and room server). #### 1.2.1. Hardware MeshCore is available on a variety of 433MHz, 868MHz and 915MHz LoRa devices. For example, Lilygo T-Deck, T-Pager, RAK Wireless WisBlock RAK4631 devices (e.g. 19003, 19007, 19026), Heltec V3, Xiao S3 WIO, Xiao C3, Heltec T114, Station G2, Nano G2 Ultra, Seeed Studio T1000-E. More devices are being added regularly. -For an up-to-date list of supported devices, please go to https://flasher.meshcore.co.uk/ +For an up-to-date list of supported devices, please go to https://flasher.meshcore.io To use MeshCore without using a phone as the client interface, you can run MeshCore on a LiLygo's T-Deck, T-Deck Plus, T-Pager, T-Watch, or T-Display Pro. MeshCore Ultra firmware running on these devices are a complete off-grid secure communication solution. @@ -144,12 +130,11 @@ Companion radios are for connecting to the Android app or web app as a messenger 1. **BLE Companion** BLE Companion firmware runs on a supported LoRa device and connects to a smart device running the Android or iOS MeshCore client over BLE - + 2. **USB Serial Companion** USB Serial Companion firmware runs on a supported LoRa device and connects to a smart device or a computer over USB Serial running the MeshCore web client - - + #### 1.2.4. Repeater Repeaters are used to extend the range of a MeshCore network. Repeater firmware runs on the same devices that run client firmware. A repeater's job is to forward MeshCore packets to the destination device. It does **not** forward or retransmit every packet it receives, unlike other LoRa mesh systems. @@ -208,7 +193,7 @@ Recently, as of October 2025, many regions have moved to the "narrow" setting, a After extensive testing, many regions have switched or about to switch over to BW62.5 and SF7, 8, or 9. Narrower bandwidth setting and lower SF setting allow MeshCore's radio signals to fit between interference in the ISM band, provide for a lower noise floor, better SNR, and faster transmissions. -If you have consensus from your community in your region to update your region's preset recommendation, please post your update request on the [#meshcore-app](https://discord.com/channels/1343693475589263471/1391681655911088241) channel on the [MeshCore Discord server ](https://discord.gg/cYtQNYCCRK) to let Liam Cottle know. +If you have consensus from your community in your region to update your region's preset recommendation, please post your update request on the [#meshcore-app](https://discord.com/channels/1343693475589263471/1391681655911088241) channel on the [MeshCore Discord server ](https://meshcore.gg) to let Liam Cottle know. @@ -243,11 +228,11 @@ The separate `set advert.interval {minutes}` command controls the local zero-hop Repeater or room server can be administered with one of the options below: -- After a repeater or room server firmware is flashed on to a LoRa device, go to and use the web user interface to connect to the LoRa device via USB serial. From there you can set the name of the server, its frequency and other related settings, location, passwords etc. +- After a repeater or room server firmware is flashed on to a LoRa device, go to and use the web user interface to connect to the LoRa device via USB serial. From there you can set the name of the server, its frequency and other related settings, location, passwords etc. ![image](https://github.com/user-attachments/assets/2a9d9894-e34d-4dbe-b57c-fc3c250a2d34) -- Connect the server device using a USB cable to a computer running Chrome on https://flasher.meshcore.co.uk/, then use the `console` feature to connect to the device +- Connect the server device using a USB cable to a computer running Chrome on https://flasher.meshcore.io, then use the `console` feature to connect to the device - Use a MeshCore smartphone clients to remotely administer servers via LoRa. @@ -290,6 +275,10 @@ Reboot the repeater after `set prv.key ` command for the new private key to **A:** You can generate a new private key and specific the first byte of its public key here: https://gessaman.com/mc-keygen/ +Having multiple repeaters with the same first byte ID does not negatively affect the mesh or its functionality. Flood and pathed packets will still reach their destinations. First byte ID collision makes traceroute and path analysis harder because these tools don't know exactly which of the two (or more) colliding repeaters is the one in the path. + +Best practice is when you set up a new repeater, choose a public key that is not in use. If it is not possible to find a unique first byte for your repeater's public key, choose one that is unique within about 10 miles (16 km) to minimize collision with nearby repeaters. + ### 3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do? @@ -306,6 +295,58 @@ This is a very low cost operation. AGC reset is done by simply setting `state = **A:** The observer instruction is available here: https://analyzer.letsmesh.net/observer/onboard +### 3.9. Q: What is multi-byte support? What do 1-byte, 2-byte, 3-byte adverts and messages mean? + +**A:** +The original MeshCore protocol design uses the first byte of a repeater's public key to denote the repeater in a path. And with 1 byte for each repeater in the path, MeshCore packets can travel as many as 64 hops. + +However, with 1 byte, there are only 254 unique IDs (exclude 00 and FF which are reserved). Many meshes group have multiple repeaters with the same first byte in their public keys. Packets continue to pass through repeaters and the mesh is not harmed in anyway. It does make it harder for tools to analyze paths with duplicated repeater IDs. + +Firmware version 1.14 and newer introduces the ability for repeaters to advert with 1-, 2-, or 3-byte adverts. Companions can also send out channel and direct messages with 1-, 2-, or 3-byte path. Adverts and messages sent in 1-byte path is compatible with repeater firmware older or newer than 1.14. They will travel up to 64 hops. 2-byte adverts and messages will travel up to 32 hops. 3-byte adverts and messages will travel up to 21 hops. + +### 3.9.1. Q: **What path hash sizes will my repeater forward?** + +Repeaters running firmware 1.14+ repeat packets sent with 1-, 2-, or 3-byte path hash. Repeaters on firmware older than 1.14 only repeat 1-byte path hash packets and silently drop 2- and 3-byte packets. + +### 3.9.2. Q: **What determines a packet's path hash size?** + +The original packet sender determines the path hash size. The most common original sender is a companion app. The other common original sender is a repeater, when it broadcasts its advert. + +### 3.9.3. Q: **How do I change my companion's path hash size?** + +As of firmware version 1.14 and MeshCore app version 1.41.0, in the MeshCore app, you can set your companion's message path hash size in `Settings (gear icon)`, `Experimental Settings`. + +Until your regional mesh has the vast majority of the repeaters updated to 1.14+ firmware, it is recommended to keep your companion at the default 1-byte because pre-1.14 repeaters will silently drop messages with larger path hashes. + +### 3.9.4. Q: **What does the CLI command `path.hash.mode` do on a repeater?** + +This CLI command `path.hash.mode` *only* controls the path hash size used in a repeater's own advert broadcasts. It does **NOT** affect which packets the repeater forwards. A repeater with firmware 1.14+ always forward 1-, 2-, and 3-byte packets regardless of this setting. + +Usage: `set path.hash.mode {0|1|2}`: + +``` +┌────────────────┬───────────────────────┐ +│ path.hash.mode │ Advert path hash size │ +├────────────────┼───────────────────────┤ +│ 0 │ 1 byte (default) │ +├────────────────┼───────────────────────┤ +│ 1 │ 2 bytes │ +├────────────────┼───────────────────────┤ +│ 2 │ 3 bytes │ +└────────────────┴───────────────────────┘ +``` + +It is safe to set your 1.14+ repeaters to mode 1 or 2. + +### 3.9.5. Q: **Why use 2- or 3-byte path hash for adverts?** + +A longer path hash helps tools like the LetsMesh.net Analyzer and MeshMapper disambiguate repeaters more reliably. With only 1 byte, the chance of different repeaters having the same first byte in their public key is high, making it harder to tell them apart in mesh network analysis. Since this only affects adverts, there's no downside. 2- and 3-byte adverts don't travel as far as 1-byte adverts, but it is not important for MeshCore nodes to hear a repeater's advert that are 21 or 32 hops away. + +### 3.9.6. Q: **When can we move away from 1-byte path hash for channel and direct messages?** + +You should move to send 2-byte or 3-byte channel and direct messages when the vast majority of the repeaters in your regional mesh are updated to firmware version 1.14 or newer. Setting your repeater's `path.hash.mode` to 1 (for 2-byte path hash) or 2 (for 3-byte path hash) now helps the community gauge to how many repeaters have updated to 1.14+. Please work with your MeshCore community together to decide when to switch to 2-byte path or 3-byte path for channel and direct messages. + + --- ## 4. T-Deck Related @@ -323,7 +364,7 @@ This is a very low cost operation. AGC reset is done by simply setting `state = 5. Hear USB connection sound 6. Release trackball 7. T-Deck in DFU mode now -8. At this point you can begin flashing using +8. At this point you can begin flashing using ### 4.3. Q: Why is my T-Deck Plus not getting any satellite lock? **A:** For T-Deck Plus, the GPS baud rate should be set to **38400**. Also, some T-Deck Plus devices were found to have the GPS module installed upside down, with the GPS antenna facing down instead of up. If your T-Deck Plus still doesn't get any satellite lock after setting the baud rate to 38400, you might need to open the device to check the GPS orientation. @@ -360,10 +401,7 @@ Another way to download map tiles is to use this Python script to get the tiles There is also a modified script that adds additional error handling and parallel downloads: - - -UK map tiles are available separately from Andy Kirby on his discord server: - + ### 4.8. Q: Where do the map tiles go? Once you have the tiles downloaded, copy the `\tiles` folder to the root of your T-Deck's SD card. @@ -484,7 +522,7 @@ The third character is the capital letter 'O', not zero `0` - Firmware repo: https://github.com/meshcore-dev/MeshCore ### 5.8. Q: How can I support MeshCore? -**A:** Provide your honest feedback on GitHub and on [MeshCore Discord server](https://discord.gg/BMwCtwHj5V). Spread the word of MeshCore to your friends and communities; help them get started with MeshCore. Support Scott's MeshCore development at . +**A:** Provide your honest feedback on GitHub and on [MeshCore Discord server](https://meshcore.gg). Spread the word of MeshCore to your friends and communities; help them get started with MeshCore. Support Scott's MeshCore development at . Support Liam Cottle's smartphone client development by unlocking the server administration wait gate with in-app purchase @@ -521,10 +559,6 @@ pio run -e RAK_4631_Repeater ``` then you'll find `firmware.zip` in `.pio/build/RAK_4631_Repeater` -Andy also has a video on how to build using VS Code: -*How to build and flash Meshcore repeater firmware | Heltec V3* - *(Link referenced in the Discord post)* - ### 5.10. Q: Are there other MeshCore related open source projects? **A:** [Liam Cottle](https://liamcottle.net)'s MeshCore web client and MeshCore Javascript library are open source under MIT license. @@ -544,7 +578,7 @@ MeshCore clients would need to reset path constantly and flood traffic across th This could change in the future if MeshCore develops a client firmware that repeats. [Source](https://discord.com/channels/826570251612323860/1330643963501351004/1354780032140054659) -### 5.12. Q: How do I add a node to the [MeshCore Map](https://meshcore.co.uk/map.html) +### 5.12. Q: How do I add a node to the [MeshCore Map](https://map.meshcore.io) **A:** To add a BLE Companion radio, connect to the BLE Companion radio from the MeshCore smartphone app. In the app, tap the `3 dot` menu icon at the top right corner, then tap `Internet Map`. Tap the `3 dot` menu icon again and choose `Add me to the Map` @@ -561,18 +595,18 @@ Below are the instructions to flash firmware onto a supported LoRa device using > Instructions for nRF devices like RAK, T1000-E, T114 are immediately after the ESP instructions For ESP-based devices (e.g. Heltec V3) you need: -- Download firmware file from flasher.meshcore.co.uk +- Download firmware file from https://flasher.meshcore.io - Go to the web site on a browser, find the section that has the firmware up need - Click the Download button, right click on the file you need, for example, - `Heltec_V3_companion_radio_ble-v1.7.1-165fb33.bin` - Non-merged bin keeps the existing Bluetooth pairing database - `Heltec_v3_companion_radio_usb-v1.7.1-165fb33-merged.bin` - Merged bin overwrites everything including the bootloader, existing Bluetooth pairing database, but keeps configurations. - - Right click on the file name and copy the link and note it for later use here is an example: `https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin` + - Right click on the file name and copy the link and note it for later use here is an example: `https://flasher.meshcore.io/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin` - Run: - - `wget https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin` to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, merged bin or non-merged bin + - `wget https://flasher.meshcore.io/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin` to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, merged bin or non-merged bin - If the above wget command only downloads a very small file (10K bytes instead of more than 100K byte, use this command instead: - - `wget --user-agent="Mozilla/5.0" --content-disposition "https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_usb-v1.7.1-165fb33.bin"` + - `wget --user-agent="Mozilla/5.0" --content-disposition "https://flasher.meshcore.io/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_usb-v1.7.1-165fb33.bin"` - Confirm the `ttyXXXX` device path on your Raspberry Pi: - Go to `/dev` directory, run ls command to find confirm your device path - They are usually `/dev/ttyUSB0` for ESP devices @@ -589,14 +623,14 @@ For ESP-based devices (e.g. Heltec V3) you need: **Instructions for nRF devices:** For nRF devices (e.g. RAK, Heltec T114) you need the following: -- Download firmware file from flasher.meshcore.co.uk +- Download firmware file from https://flasher.meshcore.io - Go to the web site on a browser, find the section that has the firmware up need - You need the ZIP version for the adafruit flash tool (below) - Click the Download button, right click on the ZIP file, for example: - `RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip` - - Right click on the file name and copy the link and note it for later use here is an example: `https://flasher.meshcore.dev/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip` + - Right click on the file name and copy the link and note it for later use here is an example: `https://flasher.meshcore.io/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip` - Run: - - `wget https://flasher.meshcore.dev/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip` to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, ZIP file only + - `wget https://flasher.meshcore.io/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip` to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, ZIP file only - Confirm the `ttyXXXX` device path on your Raspberry Pi: - Go to `/dev` directory, run ls command to find confirm your device path - They are usually `/dev/ttyACM0` for nRF devices @@ -618,101 +652,16 @@ From here, reference repeater and room server command line commands on MeshCore ### 5.14. Q: Are there are projects built around MeshCore? -**A:** Yes. Some of them are listed below. +**A:** Yes, there are many. MeshCore's protocol is open source using the MIT license. The MIT license and the open source protocol makes it very easy for the MeshCore community to build new firmware for radios, applications on mobile devices, map tools, and analysis tools, and integration with other projects like Home Asistant. -#### 5.14.1. overview - -Some resources that by themselves give overviews about MeshCore related projects: - -##### 5.14.1.1. awesome-meshcore -A meta website/ git-repository collecting many projects related to MeshCore, grouped by type. See -https://github.com/samuk/awesome-meshcore. - -#### 5.14.2. programming libraries, command line software - -##### 5.14.2.1. meshcoremqtt -A Python script to send meshcore debug and packet capture data to MQTT for analysis. Cisien's version is a fork of Andrew-a-g's and is being used to to collect data for https://map.w0z.is/messages and https://analyzer.letsmesh.net/ -https://github.com/Cisien/meshcoretomqtt -https://github.com/Andrew-a-g/meshcoretomqtt - -##### 5.14.2.2. MeshCore for Home Assistant -A custom Home Assistant integration for MeshCore mesh radio nodes. It allows you to monitor and control MeshCore nodes via USB, BLE, or TCP connections. -https://github.com/awolden/meshcore-ha - -##### 5.14.2.3. Python MeshCore -Bindings to access your MeshCore companion radio nodes in python. -https://github.com/fdlamotte/meshcore_py - -##### 5.14.2.4. meshcore-cli -CLI interface to MeshCore companion radio over BLE, TCP, or serial. Uses Python MeshCore above. - https://github.com/fdlamotte/meshcore-cli - -##### 5.14.2.5. meshcore.js -A JavaScript library for interacting with a MeshCore device running the companion radio firmware -https://github.com/liamcottle/meshcore.js - -##### 5.14.2.6. pyMC_core -pyMC_Core is a Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI. -https://github.com/rightup/pyMC_core - -##### 5.14.2.7. MeshCore Packet Decoder -A TypeScript library for decoding MeshCore mesh networking packets with full cryptographic support. Uses WebAssembly (WASM) for Ed25519 key derivation through the orlp/ed25519 library. It powers the [MeshCore Packet Analyzer](https://analyzer.letsmesh.net/packets). -https://github.com/michaelhart/meshcore-decoder - -##### 5.14.2.8. meshcore-pi -meshcore-pi is another Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI or GPIO. -https://github.com/brianwiddas/meshcore-pi - -##### 5.14.2.9. pyMC_Repeater -pyMC_Repeater is a repeater daemon in Python built on top of the [`pymc_core`](#5146-pymc_core) library. -https://github.com/rightup/pyMC_Repeater - -##### 5.14.2.10. MeshCore map auto uploader -A Node.js software that will upload every repeater or room server to [map.meshcore.dev](https://map.meshcore.dev/) when a connected companion hears new advert. -https://github.com/recrof/map.meshcore.dev-uploader - -#### 5.14.3. apps, graphical software - -##### 5.14.3.1. meshcore-open -Open Source companion app for Android, iOS, GNU/Linux (and maybe other Unixes), Windows, macOS, chromium-based browsers. -https://github.com/zjs81/meshcore-open - -#### 5.14.4. firmwares - -##### 5.14.4.1. MeshCore-Cardputer-ADV -Standalone client firmware for the "[M5Stack Cardputer ADV](https://docs.m5stack.com/en/core/Cardputer-Adv)" with the "[M5Stack Cap LoRa-1262](https://docs.m5stack.com/en/cap/Cap_LoRa-1262)" module. - -There are two variants: - -* https://github.com/Stachugit/MeshCore-Cardputer-ADV, -* https://github.com/sosprz/meshcore-cardputer-adv. - -##### 5.14.4.2. LunarCore -Multi-protocol mesh firmware for ESP32-S3 LoRa devices (MeshCore, Meshtastic, RNode/KISS (Reticulum)). Protocol is auto-detected from the first bytes over serial or BLE. -https://github.com/STCisGOOD/lunarcore - -##### 5.14.4.3. MC-Term -(Soon to be) Open Source companion firmware for [LilyGO T-Deck (Plus)](https://lilygo.cc/en-us/products/t-deck-plus-1) and [Seeed Studio SenseCap Indicator (TFT / D1Pro)](https://www.seeedstudio.com/SenseCAP-Indicator-D1Pro-p-5644.html), that can be used both standalone and together with a companion app. -https://github.com/dabeani/meshcore - -##### 5.14.4.4. Meck -Companion firmware for [LilyGo T-Deck Pro](https://lilygo.cc/products/t-deck-pro) that allows standalone operation and connection to a companion app via Bluetooth Low Energy (BLE). -https://github.com/pelgraine/Meck - -##### 5.14.4.5. Meshcore for Wio Tracker L1 Pro -Companion firmware for [Seeed Studio Wio Tracker L1 Pro](https://www.seeedstudio.com/Wio-Tracker-L1-Pro-p-6454.html) with specific UI adjustments that can be used standalone. -https://github.com/sosprz/Meshcore-Wio-Tracker-L1-Pro - -#### 5.14.5. online services - -*(None yet listed here. See [overview ressources](#5141-overview).)* +As new MeshCore community projects become available on a weekly basis, we have stopped tracking them here in this FAQ. [samuk](https://github.com/samuk) maintains a very exhausive list of MeshCore community project at https://github.com/samuk/awesome-meshcore/blob/main/README.md. samuk accepts PRs and merges them regularly. ### 5.15. Q: Are there client applications for Windows or Mac? -**A:** Yes, the same iOS and Android client is also available for Windows and Intel Mac (sorry, not available for ARM-based Mac yet). You can find them together with the Android APK here: +**A:** Yes, the same iOS and Android client is also available for Windows and Mac. You can find them together with the Android APK here: https://files.liamcottle.net/MeshCore -Both the Windows and Intel Mac versions of the client app are fully unlocked and are free to use. +Both the Windows and Mac versions of the client app are fully unlocked and are free to use. ### 5.16. Q: Are there any resources that compare MeshCore to other LoRa systems? @@ -761,16 +710,16 @@ You can get the epoch time on and use it to se - For Heltec T114, click the reset button **TWICE** (the bottom button) - For Xiao nRF52, click the reset button once. If that doesn't work, quickly double click the reset button twice. If that doesn't work, disconnection the board from your PC and reconnect again ([seeed studio wiki](https://wiki.seeedstudio.com/XIAO_BLE/#access-the-swd-pins-for-debugging-and-reflashing-bootloader)) 5. A new folder will appear on your computer's desktop -6. Download the `flash_erase*.uf2` file for your device on flasher.meshcore.co.uk +6. Download the `flash_erase*.uf2` file for your device on https://flasher.meshcore.io - RAK WisBlock and Heltec T114: `Flash_erase-nRF32_softdevice_v6.uf2` - Seeed Studio Xiao nRF52 WIO: `Flash_erase-nRF52_softdevice_v7.uf2` 8. drag and drop the uf2 file for your device to the root of the new folder 9. Wait for the copy to complete. You might get an error dialog, you can ignore it -10. Go to https://flasher.meshcore.co.uk/, click `Console` and select the serial port for your connected device +10. Go to https://flasher.meshcore.io, click `Console` and select the serial port for your connected device 11. In the console, press enter. Your flash should now be erased 12. You may now flash the latest MeshCore firmware onto your device -Separately, starting in firmware version 1.7.0, there is a CLI Rescue mode. If your device has a user button (e.g. some RAK, T114), you can activate the rescue mode by hold down the user button of the device within 8 seconds of boot. Then you can use the 'Console' on flasher.meshcore.co.uk +Separately, starting in firmware version 1.7.0, there is a CLI Rescue mode. If your device has a user button (e.g. some RAK, T114), you can activate the rescue mode by hold down the user button of the device within 8 seconds of boot. Then you can use the 'Console' on https://flasher.meshcore.io ### 6.8. Q: WebFlasher fails on Linux with failed to open @@ -783,12 +732,12 @@ Allow the browser user on it: --- ## 7. Other Questions: -### 7.1. Q: How to update nRF (RAK, T114, Seed XIAO) repeater and room server firmware over the air using the new simpler DFU app? +### 7.1. Q: How to update nRF (RAK, T114, Seed XIAO) companion, repeater and room server firmware over the air using the new simpler DFU app? **A:** The steps below work on both Android and iOS as nRF has made both apps' user interface the same on both platforms: 1. Download nRF's DFU app from iOS App Store or Android's Play Store, you can find the app by searching for `nrf dfu`, the app's full name is `nRF Device Firmware Update` -2. On flasher.meshcore.co.uk, download the **ZIP** version of the firmware for your nRF device (e.g. RAK or Heltec T114 or Seeed Studio's Xiao) +2. On https://flasher.meshcore.io, download the **ZIP** version of the firmware for your nRF device (e.g. RAK or Heltec T114 or Seeed Studio's Xiao) 3. From the MeshCore app, login remotely to the repeater you want to update with admin privilege 4. Go to the Command Line tab, type `start ota` and hit enter. 5. you should see `OK` to confirm the repeater device is now in OTA mode @@ -798,8 +747,14 @@ Allow the browser user on it: 10. Select the device you want to update. If the device you want to update is not on the list, try enabling`OTA` on the device again 11. If the device is not found, enable `Force Scanning` in the DFU app 12. Tab the `Upload` to begin OTA update -13. If it fails, try turning off and on Bluetooth on your phone. If that doesn't work, try rebooting your phone. -14. Wait for the update to complete. It can take a few minutes. +13. If it fails, try turning off and on Bluetooth on your phone. If that doesn't work, try rebooting your phone. If you keep getting failures at the "Enabling Bootloader" step, try forgetting the NRF board in your IOS or Andriod device's bluetooth settings and re-pair it through the DFU app. +14. Wait for the update to complete. It can take a few minutes. +15. It is strongly recommended that you install and use the OTAFIX bootloader at https://github.com/oltaco/Adafruit_nRF52_Bootloader_OTAFIX. +16. To update a companion node over OTA, it must be running companion firmware v1.15 or greater. +17. Please see the Meshcore Blog for additional information on OTA firmware flashing: + - https://blog.meshcore.io/2026/04/06/otafix-bootloader + - https://blog.meshcore.io/2026/04/02/nrf-ota-update + #### 7.1.1 Q: Can I update Seeed Studio Wio Tracker L1 Pro using OTA? **A:** You can flash this safer bootloader to the Wio Tracker L1 Pro @@ -811,7 +766,7 @@ After this bootloader is flashed onto the device, you can trigger over the air u ### 7.2. Q: How to update ESP32-based devices over the air? **A:** For ESP32-based devices (e.g. Heltec V3): -1. On flasher.meshcore.co.uk, download the **non-merged** version of the firmware for your ESP32 device (e.g. `Heltec_v3_repeater-v1.6.2-4449fd3.bin`, no `"merged"` in the file name) +1. On https://flasher.meshcore.io, download the **non-merged** version of the firmware for your ESP32 device (e.g. `Heltec_v3_repeater-v1.6.2-4449fd3.bin`, no `"merged"` in the file name) 2. From the MeshCore app, login remotely to the repeater you want to update with admin privilege 4. Go to the Command Line tab, type `start ota` and hit enter. 5. you should see `OK` to confirm the repeater device is now in OTA mode @@ -833,7 +788,7 @@ Currently, the following boards are supported: - Seeed Studio Wio Tracker L1 - Seeed Studio XIAO nRF52840 BLE - Seeed Studio XIAO nRF52840 BLE SENSE -- RAK 4631 (See note) +- RAK 4631 - RAK WisMesh Tag (new 28/11/2025) ### 7.4. Q: are the MeshCore logo and font available? @@ -866,17 +821,18 @@ Edit WIFI_SSID and WIFI_PWD in `./variants/heltec_v3/platformio.ini` and then fl For companion radios, you can set these radios' transmit power in the smartphone app. For repeater and room server radios, you can set their transmit power using the command line command `set tx`. You can get their current value using command line comand `get tx` -> ### ⚠️ **WARNING: Set these values at your own risk. Incorrect power settings can permanently damage your radio hardware.** + ⚠️ **WARNING: Set these values at your own risk. Incorrect power settings can permanently damage your radio hardware.** | Device / Model | Region / Description | In-App Setting (dBm) | Target Radio Output | Notes | | :--- | :--- | :--- | :--- | :--- | | **Station G2**
[Reference](https://wiki.uniteng.com/en/meshtastic/station-g2) | US915 Max Output | 19 dBm | 36.5 dBm (4.46W) | | -| | US915 Recommended Max | 16 dBm | 35 dBm (3.16W) | 1dB compression point | -| | EU868 Recommended Max | 15 dBm | 34.5 dBm (2.82W) | 1dB compression point | -| | US915 1W Output | 10 dBm | 1W | | -| | EU868 1W Output | 9 dBm | 1W | | -| **Ikoka Stick E22-900M30S** | 1W Model | 19 dBm | 1W | **DO NOT EXCEED** (Risk of burn out) | -| **Ikoka Stick E22-900M33S** | 2W Model | 9 dBm | 2W | **DO NOT EXCEED** (Risk of burn out) | -| **Heltec V4** | Standard Output | 10 dBm | 22 dBm | | -| | High Output | 22 dBm | 28 dBm | | +| | US915 Max at 1dB compression point | 16 dBm | 35 dBm (3.16W) | 1dB compression point | +| | EU868 Max at 1dB compression point | 15 dBm | 34.5 dBm (2.82W) | 1dB compression point | +| | US915 1W Output | 10 dBm | 1W | Refer to your local government's requirements | +| | EU868 1W Output | 9 dBm | 1W |Refer to your local government's requirements | +| **Ikoka Stick E22-900M30S** | 1W Model | 19 dBm | 1W | **DO NOT EXCEED** (Risk of burn out) [data sheet](https://www.cdebyte.com/pdf-down.aspx?id=4216) | +| **Ikoka Stick E22-900M33S** | 2W Model | 9 dBm | 2W | **DO NOT EXCEED** (Risk of burn out) [data sheet](https://www.cdebyte.com/pdf-down.aspx?id=4216) Refer to your local government's requirements | +| **Heltec V4** | Standard Output | 10 dBm | 22 dBm (~0.15W) | | +| | High Output | 22 dBm | 28 dBm (~0.5W to 0.6W) | | + --- diff --git a/docs/nrf52_power_management.md b/docs/nrf52_power_management.md index 9c7416b3d6..58818edd50 100644 --- a/docs/nrf52_power_management.md +++ b/docs/nrf52_power_management.md @@ -33,11 +33,13 @@ Shutdown reason codes (stored in GPREGRET2): ## Supported Boards + | Board | Implemented | LPCOMP wake | VBUS wake | |-------|-------------|-------------|-----------| | Seeed Studio XIAO nRF52840 (`xiao_nrf52`) | Yes | Yes | Yes | | RAK4631 (`rak4631`) | Yes | Yes | Yes | | Heltec T114 (`heltec_t114`) | Yes | Yes | Yes | +| GAT562 Mesh Watch13 | Yes | Yes | Yes | | Promicro nRF52840 | No | No | No | | RAK WisMesh Tag | No | No | No | | Heltec Mesh Solar | No | No | No | diff --git a/docs/number_allocations.md b/docs/number_allocations.md new file mode 100644 index 0000000000..94ad1efda1 --- /dev/null +++ b/docs/number_allocations.md @@ -0,0 +1,20 @@ +# Number Allocations + +This document lists unique numbers/identifiers used in various MeshCore protcol payloads. + +# Group Data Types + +The `PAYLOAD_TYPE_GRP_DATA` payloads have a 16-bit data-type field, which identifies which application the packet is for. + +To make sure multiple applications can function without interfering with each other, the table below is for reserving various ranges of data-type values. Just modify this table, adding a row, then submit a PR to have it authorised/merged. + +NOTE: the range FF00 - FFFF is for use while you're developing, doing POC, and for these you don't need to request to use/allocate. + +Once you have a working app/project, you need to be able to demonstrate it exists/works, and THEN request type IDs. So, just use the testing/dev range while developing, then request IDs before you transition to publishing your project. + +| Data-Type range | App name | Contact | +|-----------------|-----------------------------|------------------------------------------------------| +| 0000 - 00FF | -reserved for internal use- | | +| FF00 - FFFF | -reserved for testing/dev- | | + +(add rows, inside the range 0100 - FEFF for custom apps) diff --git a/docs/payloads.md b/docs/payloads.md index 15fec7578a..7745ac61ba 100644 --- a/docs/payloads.md +++ b/docs/payloads.md @@ -226,7 +226,7 @@ txt_type | reply path | (variable) | reply path | -# Group text message / datagram +# Group text message | Field | Size (bytes) | Description | |--------------|-----------------|--------------------------------------------| @@ -236,6 +236,22 @@ txt_type The plaintext contained in the ciphertext matches the format described in [plain text message](#plain-text-message). Specifically, it consists of a four byte timestamp, a flags byte, and the message. The flags byte will generally be `0x00` because it is a "plain text message". The message will be of the form `: ` (eg., `user123: I'm on my way`). +# Group datagram + +| Field | Size (bytes) | Description | +|--------------|-----------------|--------------------------------------------| +| channel hash | 1 | first byte of SHA256 of channel's shared key | +| cipher MAC | 2 | MAC for encrypted data in next field | +| ciphertext | rest of payload | encrypted data, see below for details | + +The data contained in the ciphertext uses the format below: + +| Field | Size (bytes) | Description | +|--------------|-----------------|--------------------------------------------| +| data type | 2 | Identifier for type of data. (See number_allocations.md) | +| data len | 1 | byte length of data | +| data | rest of payload | (depends on data type) | + # Control data diff --git a/docs/terminal_chat_cli.md b/docs/terminal_chat_cli.md index f053e64d81..c889da9672 100644 --- a/docs/terminal_chat_cli.md +++ b/docs/terminal_chat_cli.md @@ -27,10 +27,15 @@ set lon {longitude} ``` Sets your advertisement map longitude. (decimal degrees) +``` +set dutycycle {percent} +``` +Sets the transmit duty cycle limit (1-100%). Example: `set dutycycle 10` for 10%. + ``` set af {air-time-factor} ``` -Sets the transmit air-time-factor. +Sets the transmit air-time-factor. Deprecated — use `set dutycycle` instead. ``` diff --git a/examples/companion_radio/DataStore.cpp b/examples/companion_radio/DataStore.cpp index 40f1ceeb61..c7988bb344 100644 --- a/examples/companion_radio/DataStore.cpp +++ b/examples/companion_radio/DataStore.cpp @@ -230,7 +230,9 @@ void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& no file.read((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval)); // 86 file.read((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config)); // 87 file.read((uint8_t *)&_prefs.autoadd_max_hops, sizeof(_prefs.autoadd_max_hops)); // 88 - file.read((uint8_t *)&_prefs.rx_boosted_gain, sizeof(_prefs.rx_boosted_gain)); // 89 + file.read((uint8_t *)&_prefs.rx_boosted_gain, sizeof(_prefs.rx_boosted_gain)); // 89 + file.read((uint8_t *)_prefs.default_scope_name, sizeof(_prefs.default_scope_name)); // 90 + file.read((uint8_t *)_prefs.default_scope_key, sizeof(_prefs.default_scope_key)); // 121 file.close(); } @@ -268,7 +270,9 @@ void DataStore::savePrefs(const NodePrefs& _prefs, double node_lat, double node_ file.write((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval)); // 86 file.write((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config)); // 87 file.write((uint8_t *)&_prefs.autoadd_max_hops, sizeof(_prefs.autoadd_max_hops)); // 88 - file.write((uint8_t *)&_prefs.rx_boosted_gain, sizeof(_prefs.rx_boosted_gain)); // 89 + file.write((uint8_t *)&_prefs.rx_boosted_gain, sizeof(_prefs.rx_boosted_gain)); // 89 + file.write((uint8_t *)_prefs.default_scope_name, sizeof(_prefs.default_scope_name)); // 90 + file.write((uint8_t *)_prefs.default_scope_key, sizeof(_prefs.default_scope_key)); // 121 file.close(); } diff --git a/examples/companion_radio/MyMesh.cpp b/examples/companion_radio/MyMesh.cpp index 60a5a75fec..e8c1914bad 100644 --- a/examples/companion_radio/MyMesh.cpp +++ b/examples/companion_radio/MyMesh.cpp @@ -50,7 +50,7 @@ #define CMD_SEND_BINARY_REQ 50 #define CMD_FACTORY_RESET 51 #define CMD_SEND_PATH_DISCOVERY_REQ 52 -#define CMD_SET_FLOOD_SCOPE 54 // v8+ +#define CMD_SET_FLOOD_SCOPE_KEY 54 // v8+ #define CMD_SEND_CONTROL_DATA 55 // v8+ #define CMD_GET_STATS 56 // v8+, second byte is stats type #define CMD_SEND_ANON_REQ 57 @@ -59,6 +59,8 @@ #define CMD_GET_ALLOWED_REPEAT_FREQ 60 #define CMD_SET_PATH_HASH_MODE 61 #define CMD_SEND_CHANNEL_DATA 62 +#define CMD_SET_DEFAULT_FLOOD_SCOPE 63 +#define CMD_GET_DEFAULT_FLOOD_SCOPE 64 // Stats sub-types for CMD_GET_STATS #define STATS_TYPE_CORE 0 @@ -93,6 +95,7 @@ #define RESP_CODE_AUTOADD_CONFIG 25 #define RESP_ALLOWED_REPEAT_FREQ 26 #define RESP_CODE_CHANNEL_DATA_RECV 27 +#define RESP_CODE_DEFAULT_FLOOD_SCOPE 28 #define MAX_CHANNEL_DATA_LENGTH (MAX_FRAME_SIZE - 9) @@ -479,27 +482,32 @@ bool MyMesh::allowPacketForward(const mesh::Packet* packet) { return _prefs.client_repeat != 0; } -void MyMesh::sendFloodScoped(const ContactInfo& recipient, mesh::Packet* pkt, uint32_t delay_millis) { - // TODO: dynamic send_scope, depending on recipient and current 'home' Region - if (send_scope.isNull()) { +void MyMesh::sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis) { + if (scope.isNull()) { sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1); } else { uint16_t codes[2]; - codes[0] = send_scope.calcTransportCode(pkt); + codes[0] = scope.calcTransportCode(pkt); codes[1] = 0; // REVISIT: set to 'home' Region, for sender/return region? sendFlood(pkt, codes, delay_millis, _prefs.path_hash_mode + 1); } } + +void MyMesh::sendFloodScoped(const ContactInfo& recipient, mesh::Packet* pkt, uint32_t delay_millis) { + // TODO: dynamic send_scope, depending on recipient and current 'home' Region + TransportKey default_scope; + memcpy(&default_scope.key, _prefs.default_scope_key, sizeof(default_scope.key)); + + auto scope = send_scope.isNull() ? &default_scope : &send_scope; + sendFloodScoped(*scope, pkt, delay_millis); +} void MyMesh::sendFloodScoped(const mesh::GroupChannel& channel, mesh::Packet* pkt, uint32_t delay_millis) { // TODO: have per-channel send_scope - if (send_scope.isNull()) { - sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1); - } else { - uint16_t codes[2]; - codes[0] = send_scope.calcTransportCode(pkt); - codes[1] = 0; // REVISIT: set to 'home' Region, for sender/return region? - sendFlood(pkt, codes, delay_millis, _prefs.path_hash_mode + 1); - } + TransportKey default_scope; + memcpy(&default_scope.key, _prefs.default_scope_key, sizeof(default_scope.key)); + + auto scope = send_scope.isNull() ? &default_scope : &send_scope; + sendFloodScoped(*scope, pkt, delay_millis); } void MyMesh::onMessageRecv(const ContactInfo &from, mesh::Packet *pkt, uint32_t sender_timestamp, @@ -893,6 +901,17 @@ void MyMesh::begin(bool has_display) { strcpy(_prefs.node_name, pub_key_hex); #endif + // if build provides default-scope, init with that +#ifdef DEFAULT_FLOOD_SCOPE_NAME + strcpy(_prefs.default_scope_name, DEFAULT_FLOOD_SCOPE_NAME); + { + TransportKeyStore temp; + TransportKey key; + temp.getAutoKeyFor(0, "#" DEFAULT_FLOOD_SCOPE_NAME, key); + memcpy(_prefs.default_scope_key, key.key, sizeof(key.key)); + } +#endif + // load persisted prefs _store->loadPrefs(_prefs, sensors.node_lat, sensors.node_lon); @@ -1210,7 +1229,9 @@ void MyMesh::handleCmdFrame(size_t len) { if (pkt) { if (len >= 2 && cmd_frame[1] == 1) { // optional param (1 = flood, 0 = zero hop) unsigned long delay_millis = 0; - sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1); + TransportKey default_scope; + memcpy(&default_scope.key, _prefs.default_scope_key, sizeof(default_scope.key)); + sendFloodScoped(default_scope, pkt, delay_millis); } else { sendZeroHop(pkt); } @@ -1862,13 +1883,39 @@ void MyMesh::handleCmdFrame(size_t len) { } else { writeErrFrame(ERR_CODE_FILE_IO_ERROR); } - } else if (cmd_frame[0] == CMD_SET_FLOOD_SCOPE && len >= 2 && cmd_frame[1] == 0) { + } else if (cmd_frame[0] == CMD_SET_FLOOD_SCOPE_KEY && len >= 2 && cmd_frame[1] == 0) { if (len >= 2 + 16) { memcpy(send_scope.key, &cmd_frame[2], sizeof(send_scope.key)); // set curr scope TransportKey } else { memset(send_scope.key, 0, sizeof(send_scope.key)); // set scope to null } writeOKFrame(); + } else if (cmd_frame[0] == CMD_SET_DEFAULT_FLOOD_SCOPE && len >= 1) { + if (len >= 1+31+16) { + int n = strlen((char *) &cmd_frame[1]); + if (n > 0 && n < 31) { + strcpy(_prefs.default_scope_name, (char *) &cmd_frame[1]); + memcpy(_prefs.default_scope_key, &cmd_frame[1+31], 16); + savePrefs(); + writeOKFrame(); + } else { + writeErrFrame(ERR_CODE_ILLEGAL_ARG); + } + } else { + memset(_prefs.default_scope_name, 0, sizeof(_prefs.default_scope_name)); // set default scope to null + memset(_prefs.default_scope_key, 0, sizeof(_prefs.default_scope_key)); + savePrefs(); + writeOKFrame(); + } + } else if (cmd_frame[0] == CMD_GET_DEFAULT_FLOOD_SCOPE) { + out_frame[0] = RESP_CODE_DEFAULT_FLOOD_SCOPE; + if (strlen(_prefs.default_scope_name) > 0) { + memcpy(&out_frame[1], _prefs.default_scope_name, 31); + memcpy(&out_frame[1+31], _prefs.default_scope_key, 16); + _serial->writeFrame(out_frame, 1+31+16); + } else { + _serial->writeFrame(out_frame, 1); // no name or key means null + } } else if (cmd_frame[0] == CMD_SEND_CONTROL_DATA && len >= 2 && (cmd_frame[1] & 0x80) != 0) { auto resp = createControlData(&cmd_frame[1], len - 1); if (resp) { diff --git a/examples/companion_radio/MyMesh.h b/examples/companion_radio/MyMesh.h index 3b02f5f69d..aeff591cf4 100644 --- a/examples/companion_radio/MyMesh.h +++ b/examples/companion_radio/MyMesh.h @@ -5,14 +5,14 @@ #include "AbstractUITask.h" /*------------ Frame Protocol --------------*/ -#define FIRMWARE_VER_CODE 10 +#define FIRMWARE_VER_CODE 11 #ifndef FIRMWARE_BUILD_DATE -#define FIRMWARE_BUILD_DATE "20 Mar 2026" +#define FIRMWARE_BUILD_DATE "19 Apr 2026" #endif #ifndef FIRMWARE_VERSION -#define FIRMWARE_VERSION "v1.14.1" +#define FIRMWARE_VERSION "v1.15.0" #endif #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM) @@ -112,6 +112,7 @@ class MyMesh : public BaseChatMesh, public DataStoreHost { bool filterRecvFloodPacket(mesh::Packet* packet) override; bool allowPacketForward(const mesh::Packet* packet) override; + void sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis); void sendFloodScoped(const ContactInfo& recipient, mesh::Packet* pkt, uint32_t delay_millis=0) override; void sendFloodScoped(const mesh::GroupChannel& channel, mesh::Packet* pkt, uint32_t delay_millis=0) override; diff --git a/examples/companion_radio/NodePrefs.h b/examples/companion_radio/NodePrefs.h index 557be306c0..48c381ceaf 100644 --- a/examples/companion_radio/NodePrefs.h +++ b/examples/companion_radio/NodePrefs.h @@ -32,4 +32,6 @@ struct NodePrefs { // persisted to file uint8_t client_repeat; uint8_t path_hash_mode; // which path mode to use when sending uint8_t autoadd_max_hops; // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops (max 64) + char default_scope_name[31]; + uint8_t default_scope_key[16]; }; \ No newline at end of file diff --git a/examples/simple_repeater/MyMesh.cpp b/examples/simple_repeater/MyMesh.cpp index 24e8894927..666f79fc5c 100644 --- a/examples/simple_repeater/MyMesh.cpp +++ b/examples/simple_repeater/MyMesh.cpp @@ -413,6 +413,19 @@ bool MyMesh::isLooped(const mesh::Packet* packet, const uint8_t max_counters[]) return n >= max_counters[hash_size]; } +void MyMesh::sendFloodReply(mesh::Packet* packet, unsigned long delay_millis, uint8_t path_hash_size) { + if (recv_pkt_region && !recv_pkt_region->isWildcard()) { // if _request_ packet scope is known, send reply with same scope + TransportKey scope; + if (region_map.getTransportKeysFor(*recv_pkt_region, &scope, 1) > 0) { + sendFloodScoped(scope, packet, delay_millis, path_hash_size); + } else { + sendFlood(packet, delay_millis, path_hash_size); // send un-scoped + } + } else { + sendFlood(packet, delay_millis, path_hash_size); // send un-scoped + } +} + bool MyMesh::allowPacketForward(const mesh::Packet *packet) { if (_prefs.disable_fwd) return false; if (packet->isRouteFlood() && packet->getPathHashCount() >= _prefs.flood_max) return false; @@ -578,10 +591,10 @@ void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const m // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the response mesh::Packet* path = createPathReturn(sender, secret, packet->path, packet->path_len, PAYLOAD_TYPE_RESPONSE, reply_data, reply_len); - if (path) sendFlood(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); + if (path) sendFloodReply(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); } else if (reply_path_len < 0) { mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, secret, reply_data, reply_len); - if (reply) sendFlood(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); + if (reply) sendFloodReply(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); } else { mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, secret, reply_data, reply_len); uint8_t path_len = ((reply_path_hash_size - 1) << 6) | (reply_path_len & 63); @@ -654,7 +667,7 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx, // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the response mesh::Packet *path = createPathReturn(client->id, secret, packet->path, packet->path_len, PAYLOAD_TYPE_RESPONSE, reply_data, reply_len); - if (path) sendFlood(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); + if (path) sendFloodReply(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); } else { mesh::Packet *reply = createDatagram(PAYLOAD_TYPE_RESPONSE, client->id, secret, reply_data, reply_len); @@ -662,7 +675,7 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx, if (client->out_path_len != OUT_PATH_UNKNOWN) { // we have an out_path, so send DIRECT sendDirect(reply, client->out_path, client->out_path_len, SERVER_RESPONSE_DELAY); } else { - sendFlood(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); + sendFloodReply(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); } } } @@ -693,7 +706,7 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx, mesh::Packet *ack = createAck(ack_hash); if (ack) { if (client->out_path_len == OUT_PATH_UNKNOWN) { - sendFlood(ack, TXT_ACK_DELAY, packet->getPathHashSize()); + sendFloodReply(ack, TXT_ACK_DELAY, packet->getPathHashSize()); } else { sendDirect(ack, client->out_path, client->out_path_len, TXT_ACK_DELAY); } @@ -721,7 +734,7 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx, auto reply = createDatagram(PAYLOAD_TYPE_TXT_MSG, client->id, secret, temp, 5 + text_len); if (reply) { if (client->out_path_len == OUT_PATH_UNKNOWN) { - sendFlood(reply, CLI_REPLY_DELAY_MILLIS, packet->getPathHashSize()); + sendFloodReply(reply, CLI_REPLY_DELAY_MILLIS, packet->getPathHashSize()); } else { sendDirect(reply, client->out_path, client->out_path_len, CLI_REPLY_DELAY_MILLIS); } @@ -831,7 +844,9 @@ void MyMesh::sendNodeDiscoverReq() { MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondClock &ms, mesh::RNG &rng, mesh::RTCClock &rtc, mesh::MeshTables &tables) : mesh::Mesh(radio, ms, rng, rtc, *new StaticPoolPacketManager(32), tables), - _cli(board, rtc, sensors, acl, &_prefs, this), telemetry(MAX_PACKET_PAYLOAD - 4), region_map(key_store), temp_map(key_store), + region_map(key_store), temp_map(key_store), + _cli(board, rtc, sensors, region_map, acl, &_prefs, this), + telemetry(MAX_PACKET_PAYLOAD - 4), discover_limiter(4, 120), // max 4 every 2 minutes anon_limiter(4, 180) // max 4 every 3 minutes #if defined(WITH_RS232_BRIDGE) @@ -899,6 +914,8 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc pending_discover_tag = 0; pending_discover_until = 0; + + memset(default_scope.key, 0, sizeof(default_scope.key)); } void MyMesh::begin(FILESYSTEM *fs) { @@ -910,6 +927,26 @@ void MyMesh::begin(FILESYSTEM *fs) { // TODO: key_store.begin(); region_map.load(_fs); + // establish default-scope + { + RegionEntry* r = region_map.getDefaultRegion(); + if (r) { + region_map.getTransportKeysFor(*r, &default_scope, 1); + } else { +#ifdef DEFAULT_FLOOD_SCOPE_NAME + r = region_map.findByName(DEFAULT_FLOOD_SCOPE_NAME); + if (r == NULL) { + r = region_map.putRegion(DEFAULT_FLOOD_SCOPE_NAME, 0); // auto-create the default scope region + if (r) { r->flags = 0; } // Allow-flood + } + if (r) { + region_map.setDefaultRegion(r); + region_map.getTransportKeysFor(*r, &default_scope, 1); + } +#endif + } + } + #if defined(WITH_BRIDGE) if (_prefs.bridge_enabled) { bridge.begin(); @@ -933,6 +970,17 @@ void MyMesh::begin(FILESYSTEM *fs) { #endif } +void MyMesh::sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis, uint8_t path_hash_size) { + if (scope.isNull()) { + sendFlood(pkt, delay_millis, path_hash_size); + } else { + uint16_t codes[2]; + codes[0] = scope.calcTransportCode(pkt); + codes[1] = 0; // REVISIT: set to 'home' Region, for sender/return region? + sendFlood(pkt, codes, delay_millis, path_hash_size); + } +} + void MyMesh::applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) { set_radio_at = futureMillis(2000); // give CLI reply some time to be sent back, before applying temp radio params pending_freq = freq; @@ -960,7 +1008,7 @@ void MyMesh::sendSelfAdvertisement(int delay_millis, bool flood) { mesh::Packet *pkt = createSelfAdvert(); if (pkt) { if (flood) { - sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1); + sendFloodScoped(default_scope, pkt, delay_millis, _prefs.path_hash_mode + 1); } else { sendZeroHop(pkt, delay_millis); } @@ -1066,6 +1114,25 @@ void MyMesh::removeNeighbor(const uint8_t *pubkey, int key_len) { #endif } +void MyMesh::startRegionsLoad() { + temp_map.resetFrom(region_map); // rebuild regions in a temp instance + memset(load_stack, 0, sizeof(load_stack)); + load_stack[0] = &temp_map.getWildcard(); + region_load_active = true; +} + +bool MyMesh::saveRegions() { + return region_map.save(_fs); +} + +void MyMesh::onDefaultRegionChanged(const RegionEntry* r) { + if (r) { + region_map.getTransportKeysFor(*r, &default_scope, 1); + } else { + memset(default_scope.key, 0, sizeof(default_scope.key)); + } +} + void MyMesh::formatStatsReply(char *reply) { StatsFormatHelper::formatCoreStats(reply, board, *_ms, _err_flags, _mgr); } @@ -1175,107 +1242,6 @@ void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply Serial.printf("\n"); } reply[0] = 0; - } else if (memcmp(command, "region", 6) == 0) { - reply[0] = 0; - - const char* parts[4]; - int n = mesh::Utils::parseTextParts(command, parts, 4, ' '); - if (n == 1) { - region_map.exportTo(reply, 160); - } else if (n >= 2 && strcmp(parts[1], "load") == 0) { - temp_map.resetFrom(region_map); // rebuild regions in a temp instance - memset(load_stack, 0, sizeof(load_stack)); - load_stack[0] = &temp_map.getWildcard(); - region_load_active = true; - } else if (n >= 2 && strcmp(parts[1], "save") == 0) { - _prefs.discovery_mod_timestamp = rtc_clock.getCurrentTime(); // this node is now 'modified' (for discovery info) - savePrefs(); - bool success = region_map.save(_fs); - strcpy(reply, success ? "OK" : "Err - save failed"); - } else if (n >= 3 && strcmp(parts[1], "allowf") == 0) { - auto region = region_map.findByNamePrefix(parts[2]); - if (region) { - region->flags &= ~REGION_DENY_FLOOD; - strcpy(reply, "OK"); - } else { - strcpy(reply, "Err - unknown region"); - } - } else if (n >= 3 && strcmp(parts[1], "denyf") == 0) { - auto region = region_map.findByNamePrefix(parts[2]); - if (region) { - region->flags |= REGION_DENY_FLOOD; - strcpy(reply, "OK"); - } else { - strcpy(reply, "Err - unknown region"); - } - } else if (n >= 3 && strcmp(parts[1], "get") == 0) { - auto region = region_map.findByNamePrefix(parts[2]); - if (region) { - auto parent = region_map.findById(region->parent); - if (parent && parent->id != 0) { - sprintf(reply, " %s (%s) %s", region->name, parent->name, (region->flags & REGION_DENY_FLOOD) ? "" : "F"); - } else { - sprintf(reply, " %s %s", region->name, (region->flags & REGION_DENY_FLOOD) ? "" : "F"); - } - } else { - strcpy(reply, "Err - unknown region"); - } - } else if (n >= 3 && strcmp(parts[1], "home") == 0) { - auto home = region_map.findByNamePrefix(parts[2]); - if (home) { - region_map.setHomeRegion(home); - sprintf(reply, " home is now %s", home->name); - } else { - strcpy(reply, "Err - unknown region"); - } - } else if (n == 2 && strcmp(parts[1], "home") == 0) { - auto home = region_map.getHomeRegion(); - sprintf(reply, " home is %s", home ? home->name : "*"); - } else if (n >= 3 && strcmp(parts[1], "put") == 0) { - auto parent = n >= 4 ? region_map.findByNamePrefix(parts[3]) : ®ion_map.getWildcard(); - if (parent == NULL) { - strcpy(reply, "Err - unknown parent"); - } else { - auto region = region_map.putRegion(parts[2], parent->id); - if (region == NULL) { - strcpy(reply, "Err - unable to put"); - } else { - strcpy(reply, "OK"); - } - } - } else if (n >= 3 && strcmp(parts[1], "remove") == 0) { - auto region = region_map.findByName(parts[2]); - if (region) { - if (region_map.removeRegion(*region)) { - strcpy(reply, "OK"); - } else { - strcpy(reply, "Err - not empty"); - } - } else { - strcpy(reply, "Err - not found"); - } - } else if (n >= 3 && strcmp(parts[1], "list") == 0) { - uint8_t mask = 0; - bool invert = false; - - if (strcmp(parts[2], "allowed") == 0) { - mask = REGION_DENY_FLOOD; - invert = false; // list regions that DON'T have DENY flag - } else if (strcmp(parts[2], "denied") == 0) { - mask = REGION_DENY_FLOOD; - invert = true; // list regions that DO have DENY flag - } else { - strcpy(reply, "Err - use 'allowed' or 'denied'"); - return; - } - - int len = region_map.exportNamesTo(reply, 160, mask, invert); - if (len == 0) { - strcpy(reply, "-none-"); - } - } else { - strcpy(reply, "Err - ??"); - } } else if (memcmp(command, "discover.neighbors", 18) == 0) { const char* sub = command + 18; while (*sub == ' ') sub++; @@ -1300,7 +1266,7 @@ void MyMesh::loop() { if (next_flood_advert && millisHasNowPassed(next_flood_advert)) { mesh::Packet *pkt = createSelfAdvert(); uint32_t delay_millis = 0; - if (pkt) sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1); + if (pkt) sendFloodScoped(default_scope, pkt, delay_millis, _prefs.path_hash_mode + 1); updateFloodAdvertTimer(); // schedule next flood advert updateAdvertTimer(); // also schedule local advert (so they don't overlap) diff --git a/examples/simple_repeater/MyMesh.h b/examples/simple_repeater/MyMesh.h index 929584484f..8ed0317e69 100644 --- a/examples/simple_repeater/MyMesh.h +++ b/examples/simple_repeater/MyMesh.h @@ -69,11 +69,11 @@ struct NeighbourInfo { }; #ifndef FIRMWARE_BUILD_DATE - #define FIRMWARE_BUILD_DATE "20 Mar 2026" + #define FIRMWARE_BUILD_DATE "19 Apr 2026" #endif #ifndef FIRMWARE_VERSION - #define FIRMWARE_VERSION "v1.14.1" + #define FIRMWARE_VERSION "v1.15.0" #endif #define FIRMWARE_ROLE "repeater" @@ -97,6 +97,7 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks { RegionMap region_map, temp_map; RegionEntry* load_stack[8]; RegionEntry* recv_pkt_region; + TransportKey default_scope; RateLimiter discover_limiter, anon_limiter; uint32_t pending_discover_tag; unsigned long pending_discover_until; @@ -119,7 +120,6 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks { #endif void putNeighbour(const mesh::Identity& id, uint32_t timestamp, float snr); - void sendNodeDiscoverReq(); uint8_t handleLoginReq(const mesh::Identity& sender, const uint8_t* secret, uint32_t sender_timestamp, const uint8_t* data, bool is_flood); uint8_t handleAnonRegionsReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data); uint8_t handleAnonOwnerReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data); @@ -173,11 +173,13 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks { bool onPeerPathRecv(mesh::Packet* packet, int sender_idx, const uint8_t* secret, uint8_t* path, uint8_t path_len, uint8_t extra_type, uint8_t* extra, uint8_t extra_len) override; void onControlDataRecv(mesh::Packet* packet) override; + void sendFloodReply(mesh::Packet* packet, unsigned long delay_millis, uint8_t path_hash_size); + public: MyMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::MillisecondClock& ms, mesh::RNG& rng, mesh::RTCClock& rtc, mesh::MeshTables& tables); void begin(FILESYSTEM* fs); - + void sendNodeDiscoverReq(); const char* getFirmwareVer() override { return FIRMWARE_VERSION; } const char* getBuildDate() override { return FIRMWARE_BUILD_DATE; } const char* getRole() override { return FIRMWARE_ROLE; } @@ -190,6 +192,9 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks { _cli.savePrefs(_fs); } + void sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis, uint8_t path_hash_size); + + // CommonCLICallbacks void applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) override; bool formatFileSystem() override; void sendSelfAdvertisement(int delay_millis, bool flood) override; @@ -209,11 +214,15 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks { void formatStatsReply(char *reply) override; void formatRadioStatsReply(char *reply) override; void formatPacketStatsReply(char *reply) override; + void startRegionsLoad() override; + bool saveRegions() override; + void onDefaultRegionChanged(const RegionEntry* r) override; mesh::LocalIdentity& getSelfId() override { return self_id; } void saveIdentity(const mesh::LocalIdentity& new_id) override; void clearStats() override; + void handleCommand(uint32_t sender_timestamp, char* command, char* reply); void loop(); diff --git a/examples/simple_repeater/UITask.cpp b/examples/simple_repeater/UITask.cpp index d096d14b22..acb4632581 100644 --- a/examples/simple_repeater/UITask.cpp +++ b/examples/simple_repeater/UITask.cpp @@ -2,6 +2,10 @@ #include #include +#ifndef USER_BTN_PRESSED +#define USER_BTN_PRESSED LOW +#endif + #define AUTO_OFF_MILLIS 20000 // 20 seconds #define BOOT_SCREEN_MILLIS 4000 // 4 seconds @@ -85,7 +89,7 @@ void UITask::loop() { if (millis() >= _next_read) { int btnState = digitalRead(PIN_USER_BTN); if (btnState != _prevBtnState) { - if (btnState == LOW) { // pressed? + if (btnState == USER_BTN_PRESSED) { // pressed? if (_display->isOn()) { // TODO: any action ? } else { diff --git a/examples/simple_room_server/MyMesh.cpp b/examples/simple_room_server/MyMesh.cpp index 7b94377387..145fb0fd9f 100644 --- a/examples/simple_room_server/MyMesh.cpp +++ b/examples/simple_room_server/MyMesh.cpp @@ -75,7 +75,7 @@ void MyMesh::pushPostToClient(ClientInfo *client, PostInfo &post) { if (reply) { if (client->out_path_len == OUT_PATH_UNKNOWN) { unsigned long delay_millis = 0; - sendFlood(reply, delay_millis, _prefs.path_hash_mode + 1); + sendFloodScoped(default_scope, reply, delay_millis, _prefs.path_hash_mode + 1); // REVISIT client->extra.room.ack_timeout = futureMillis(PUSH_ACK_TIMEOUT_FLOOD); } else { sendDirect(reply, client->out_path, client->out_path_len); @@ -286,6 +286,23 @@ bool MyMesh::allowPacketForward(const mesh::Packet *packet) { return true; } +bool MyMesh::filterRecvFloodPacket(mesh::Packet* pkt) { + // just try to determine region for packet (apply later in allowPacketForward()) + if (pkt->getRouteType() == ROUTE_TYPE_TRANSPORT_FLOOD) { + recv_pkt_region = region_map.findMatch(pkt, REGION_DENY_FLOOD); + } else if (pkt->getRouteType() == ROUTE_TYPE_FLOOD) { + if (region_map.getWildcard().flags & REGION_DENY_FLOOD) { + recv_pkt_region = NULL; + } else { + recv_pkt_region = ®ion_map.getWildcard(); + } + } else { + recv_pkt_region = NULL; + } + // do normal processing + return false; +} + void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const mesh::Identity &sender, uint8_t *data, size_t len) { if (packet->getPayloadType() == PAYLOAD_TYPE_ANON_REQ) { // received an initial request by a possible admin @@ -361,14 +378,14 @@ void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const m // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the response mesh::Packet *path = createPathReturn(sender, client->shared_secret, packet->path, packet->path_len, PAYLOAD_TYPE_RESPONSE, reply_data, 13); - if (path) sendFlood(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); + if (path) sendFloodReply(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); } else { mesh::Packet *reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, client->shared_secret, reply_data, 13); if (reply) { if (client->out_path_len != OUT_PATH_UNKNOWN) { // we have an out_path, so send DIRECT sendDirect(reply, client->out_path, client->out_path_len, SERVER_RESPONSE_DELAY); } else { - sendFlood(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); + sendFloodReply(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); } } } @@ -458,7 +475,7 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx, if (send_ack) { if (client->out_path_len == OUT_PATH_UNKNOWN) { mesh::Packet *ack = createAck(ack_hash); - if (ack) sendFlood(ack, TXT_ACK_DELAY, packet->getPathHashSize()); + if (ack) sendFloodReply(ack, TXT_ACK_DELAY, packet->getPathHashSize()); delay_millis = TXT_ACK_DELAY + REPLY_DELAY_MILLIS; } else { uint32_t d = TXT_ACK_DELAY; @@ -491,7 +508,7 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx, auto reply = createDatagram(PAYLOAD_TYPE_TXT_MSG, client->id, secret, temp, 5 + text_len); if (reply) { if (client->out_path_len == OUT_PATH_UNKNOWN) { - sendFlood(reply, delay_millis + SERVER_RESPONSE_DELAY, packet->getPathHashSize()); + sendFloodReply(reply, delay_millis + SERVER_RESPONSE_DELAY, packet->getPathHashSize()); } else { sendDirect(reply, client->out_path, client->out_path_len, delay_millis + SERVER_RESPONSE_DELAY); } @@ -546,14 +563,14 @@ void MyMesh::onPeerDataRecv(mesh::Packet *packet, uint8_t type, int sender_idx, // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the response mesh::Packet *path = createPathReturn(client->id, secret, packet->path, packet->path_len, PAYLOAD_TYPE_RESPONSE, reply_data, reply_len); - if (path) sendFlood(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); + if (path) sendFloodReply(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); } else { mesh::Packet *reply = createDatagram(PAYLOAD_TYPE_RESPONSE, client->id, secret, reply_data, reply_len); if (reply) { if (client->out_path_len != OUT_PATH_UNKNOWN) { // we have an out_path, so send DIRECT sendDirect(reply, client->out_path, client->out_path_len, SERVER_RESPONSE_DELAY); } else { - sendFlood(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); + sendFloodReply(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize()); } } } @@ -595,12 +612,16 @@ void MyMesh::onAckRecv(mesh::Packet *packet, uint32_t ack_crc) { MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondClock &ms, mesh::RNG &rng, mesh::RTCClock &rtc, mesh::MeshTables &tables) : mesh::Mesh(radio, ms, rng, rtc, *new StaticPoolPacketManager(32), tables), - _cli(board, rtc, sensors, acl, &_prefs, this), telemetry(MAX_PACKET_PAYLOAD - 4) { + region_map(key_store), temp_map(key_store), + _cli(board, rtc, sensors, region_map, acl, &_prefs, this), + telemetry(MAX_PACKET_PAYLOAD - 4) +{ last_millis = 0; uptime_millis = 0; next_local_advert = next_flood_advert = 0; dirty_contacts_expiry = 0; _logging = false; + region_load_active = false; set_radio_at = revert_radio_at = 0; // defaults @@ -637,6 +658,8 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc next_push = 0; memset(posts, 0, sizeof(posts)); _num_posted = _num_post_pushes = 0; + + memset(default_scope.key, 0, sizeof(default_scope.key)); } void MyMesh::begin(FILESYSTEM *fs) { @@ -646,6 +669,27 @@ void MyMesh::begin(FILESYSTEM *fs) { _cli.loadPrefs(_fs); acl.load(_fs, self_id); + region_map.load(_fs); + + // establish default-scope + { + RegionEntry* r = region_map.getDefaultRegion(); + if (r) { + region_map.getTransportKeysFor(*r, &default_scope, 1); + } else { +#ifdef DEFAULT_FLOOD_SCOPE_NAME + r = region_map.findByName(DEFAULT_FLOOD_SCOPE_NAME); + if (r == NULL) { + r = region_map.putRegion(DEFAULT_FLOOD_SCOPE_NAME, 0); // auto-create the default scope region + if (r) { r->flags = 0; } // Allow-flood + } + if (r) { + region_map.setDefaultRegion(r); + region_map.getTransportKeysFor(*r, &default_scope, 1); + } +#endif + } + } radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); radio_set_tx_power(_prefs.tx_power_dbm); @@ -660,6 +704,30 @@ void MyMesh::begin(FILESYSTEM *fs) { #endif } +void MyMesh::sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis, uint8_t path_hash_size) { + if (scope.isNull()) { + sendFlood(pkt, delay_millis, path_hash_size); + } else { + uint16_t codes[2]; + codes[0] = scope.calcTransportCode(pkt); + codes[1] = 0; // REVISIT: set to 'home' Region, for sender/return region? + sendFlood(pkt, codes, delay_millis, path_hash_size); + } +} + +void MyMesh::sendFloodReply(mesh::Packet* packet, unsigned long delay_millis, uint8_t path_hash_size) { + if (recv_pkt_region && !recv_pkt_region->isWildcard()) { // if _request_ packet scope is known, send reply with same scope + TransportKey scope; + if (region_map.getTransportKeysFor(*recv_pkt_region, &scope, 1) > 0) { + sendFloodScoped(scope, packet, delay_millis, path_hash_size); + } else { + sendFlood(packet, delay_millis, path_hash_size); // send un-scoped + } + } else { + sendFlood(packet, delay_millis, path_hash_size); // send un-scoped + } +} + void MyMesh::applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) { set_radio_at = futureMillis(2000); // give CLI reply some time to be sent back, before applying temp radio params pending_freq = freq; @@ -687,7 +755,7 @@ void MyMesh::sendSelfAdvertisement(int delay_millis, bool flood) { mesh::Packet *pkt = createSelfAdvert(); if (pkt) { if (flood) { - sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1); + sendFloodScoped(default_scope, pkt, delay_millis, _prefs.path_hash_mode + 1); } else { sendZeroHop(pkt, delay_millis); } @@ -744,6 +812,25 @@ void MyMesh::saveIdentity(const mesh::LocalIdentity &new_id) { store.save("_main", new_id); } +void MyMesh::startRegionsLoad() { + temp_map.resetFrom(region_map); // rebuild regions in a temp instance + memset(load_stack, 0, sizeof(load_stack)); + load_stack[0] = &temp_map.getWildcard(); + region_load_active = true; +} + +bool MyMesh::saveRegions() { + return region_map.save(_fs); +} + +void MyMesh::onDefaultRegionChanged(const RegionEntry* r) { + if (r) { + region_map.getTransportKeysFor(*r, &default_scope, 1); + } else { + memset(default_scope.key, 0, sizeof(default_scope.key)); + } +} + void MyMesh::clearStats() { radio_driver.resetStats(); resetStats(); @@ -764,6 +851,40 @@ void MyMesh::formatPacketStatsReply(char *reply) { } void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply) { + if (region_load_active) { + if (StrHelper::isBlank(command)) { // empty/blank line, signal to terminate 'load' operation + region_map = temp_map; // copy over the temp instance as new current map + region_load_active = false; + + sprintf(reply, "OK - loaded %d regions", region_map.getCount()); + } else { + char *np = command; + while (*np == ' ') np++; // skip indent + int indent = np - command; + + char *ep = np; + while (RegionMap::is_name_char(*ep)) ep++; + if (*ep) { *ep++ = 0; } // set null terminator for end of name + + while (*ep && *ep != 'F') ep++; // look for (optional) flags + + if (indent > 0 && indent < 8 && strlen(np) > 0) { + auto parent = load_stack[indent - 1]; + if (parent) { + auto old = region_map.findByName(np); + auto nw = temp_map.putRegion(np, parent->id, old ? old->id : 0); // carry-over the current ID (if name already exists) + if (nw) { + nw->flags = old ? old->flags : (*ep == 'F' ? 0 : REGION_DENY_FLOOD); // carry-over flags from curr + + load_stack[indent] = nw; // keep pointers to parent regions, to resolve parent_id's + } + } + } + reply[0] = 0; + } + return; + } + while (*command == ' ') command++; // skip leading spaces @@ -865,7 +986,7 @@ void MyMesh::loop() { if (next_flood_advert && millisHasNowPassed(next_flood_advert)) { mesh::Packet *pkt = createSelfAdvert(); uint32_t delay_millis = 0; - if (pkt) sendFlood(pkt, delay_millis, _prefs.path_hash_mode + 1); + if (pkt) sendFloodScoped(default_scope, pkt, delay_millis, _prefs.path_hash_mode + 1); updateFloodAdvertTimer(); // schedule next flood advert updateAdvertTimer(); // also schedule local advert (so they don't overlap) diff --git a/examples/simple_room_server/MyMesh.h b/examples/simple_room_server/MyMesh.h index e888bfa513..1b35ae95a1 100644 --- a/examples/simple_room_server/MyMesh.h +++ b/examples/simple_room_server/MyMesh.h @@ -20,17 +20,18 @@ #include #include #include +#include #include #include /* ------------------------------ Config -------------------------------- */ #ifndef FIRMWARE_BUILD_DATE - #define FIRMWARE_BUILD_DATE "20 Mar 2026" + #define FIRMWARE_BUILD_DATE "19 Apr 2026" #endif #ifndef FIRMWARE_VERSION - #define FIRMWARE_VERSION "v1.14.1" + #define FIRMWARE_VERSION "v1.15.0" #endif #ifndef LORA_FREQ @@ -93,7 +94,10 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks { uint64_t uptime_millis; unsigned long next_local_advert, next_flood_advert; bool _logging; + bool region_load_active; NodePrefs _prefs; + TransportKeyStore key_store; + RegionMap region_map, temp_map; ClientACL acl; CommonCLI _cli; unsigned long dirty_contacts_expiry; @@ -104,6 +108,9 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks { int next_post_idx; PostInfo posts[MAX_UNSYNCED_POSTS]; // cyclic queue CayenneLPP telemetry; + RegionEntry* load_stack[8]; + RegionEntry* recv_pkt_region; + TransportKey default_scope; unsigned long set_radio_at, revert_radio_at; float pending_freq; float pending_bw; @@ -144,6 +151,8 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks { return _prefs.multi_acks; } + bool filterRecvFloodPacket(mesh::Packet* pkt) override; + bool allowPacketForward(const mesh::Packet* packet) override; void onAnonDataRecv(mesh::Packet* packet, const uint8_t* secret, const mesh::Identity& sender, uint8_t* data, size_t len) override; int searchPeersByHash(const uint8_t* hash) override ; @@ -158,6 +167,8 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks { } #endif + void sendFloodReply(mesh::Packet* packet, unsigned long delay_millis, uint8_t path_hash_size); + public: MyMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::MillisecondClock& ms, mesh::RNG& rng, mesh::RTCClock& rtc, mesh::MeshTables& tables); @@ -175,6 +186,9 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks { _cli.savePrefs(_fs); } + void sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis, uint8_t path_hash_size); + + // CommonCLICallbacks void applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) override; bool formatFileSystem() override; void sendSelfAdvertisement(int delay_millis, bool flood) override; @@ -196,6 +210,9 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks { void formatStatsReply(char *reply) override; void formatRadioStatsReply(char *reply) override; void formatPacketStatsReply(char *reply) override; + void startRegionsLoad() override; + bool saveRegions() override; + void onDefaultRegionChanged(const RegionEntry* r) override; mesh::LocalIdentity& getSelfId() override { return self_id; } diff --git a/examples/simple_room_server/UITask.cpp b/examples/simple_room_server/UITask.cpp index 46311c5eb9..42bc14d4a5 100644 --- a/examples/simple_room_server/UITask.cpp +++ b/examples/simple_room_server/UITask.cpp @@ -2,6 +2,10 @@ #include #include +#ifndef USER_BTN_PRESSED +#define USER_BTN_PRESSED LOW +#endif + #define AUTO_OFF_MILLIS 20000 // 20 seconds #define BOOT_SCREEN_MILLIS 4000 // 4 seconds @@ -85,7 +89,7 @@ void UITask::loop() { if (millis() >= _next_read) { int btnState = digitalRead(PIN_USER_BTN); if (btnState != _prevBtnState) { - if (btnState == LOW) { // pressed? + if (btnState == USER_BTN_PRESSED) { // pressed? if (_display->isOn()) { // TODO: any action ? } else { diff --git a/examples/simple_sensor/SensorMesh.cpp b/examples/simple_sensor/SensorMesh.cpp index 57d23a311e..b8fe1e579c 100644 --- a/examples/simple_sensor/SensorMesh.cpp +++ b/examples/simple_sensor/SensorMesh.cpp @@ -696,7 +696,9 @@ void SensorMesh::onAckRecv(mesh::Packet* packet, uint32_t ack_crc) { SensorMesh::SensorMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::MillisecondClock& ms, mesh::RNG& rng, mesh::RTCClock& rtc, mesh::MeshTables& tables) : mesh::Mesh(radio, ms, rng, rtc, *new StaticPoolPacketManager(32), tables), - _cli(board, rtc, sensors, acl, &_prefs, this), telemetry(MAX_PACKET_PAYLOAD - 4) + region_map(key_store), + _cli(board, rtc, sensors, region_map, acl, &_prefs, this), + telemetry(MAX_PACKET_PAYLOAD - 4) { next_local_advert = next_flood_advert = 0; dirty_contacts_expiry = 0; @@ -729,6 +731,8 @@ SensorMesh::SensorMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::Millise _prefs.gps_enabled = 0; _prefs.gps_interval = 0; _prefs.advert_loc_policy = ADVERT_LOC_PREFS; + + memset(default_scope.key, 0, sizeof(default_scope.key)); } void SensorMesh::begin(FILESYSTEM* fs) { @@ -738,6 +742,27 @@ void SensorMesh::begin(FILESYSTEM* fs) { _cli.loadPrefs(_fs); acl.load(_fs, self_id); + region_map.load(_fs); + + // establish default-scope + { + RegionEntry* r = region_map.getDefaultRegion(); + if (r) { + region_map.getTransportKeysFor(*r, &default_scope, 1); + } else { +#ifdef DEFAULT_FLOOD_SCOPE_NAME + r = region_map.findByName(DEFAULT_FLOOD_SCOPE_NAME); + if (r == NULL) { + r = region_map.putRegion(DEFAULT_FLOOD_SCOPE_NAME, 0); // auto-create the default scope region + if (r) { r->flags = 0; } // Allow-flood + } + if (r) { + region_map.setDefaultRegion(r); + region_map.getTransportKeysFor(*r, &default_scope, 1); + } +#endif + } + } radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr); radio_set_tx_power(_prefs.tx_power_dbm); diff --git a/examples/simple_sensor/SensorMesh.h b/examples/simple_sensor/SensorMesh.h index bb786b2abd..ee5d5e025a 100644 --- a/examples/simple_sensor/SensorMesh.h +++ b/examples/simple_sensor/SensorMesh.h @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -138,6 +139,9 @@ class SensorMesh : public mesh::Mesh, public CommonCLICallbacks { uint8_t reply_data[MAX_PACKET_PAYLOAD]; unsigned long dirty_contacts_expiry; CayenneLPP telemetry; + TransportKeyStore key_store; + RegionMap region_map; + TransportKey default_scope; uint32_t last_read_time; int matching_peer_indexes[MAX_SEARCH_RESULTS]; int num_alert_tasks; diff --git a/examples/simple_sensor/UITask.cpp b/examples/simple_sensor/UITask.cpp index 0694bc3c1a..0e78fee005 100644 --- a/examples/simple_sensor/UITask.cpp +++ b/examples/simple_sensor/UITask.cpp @@ -2,6 +2,10 @@ #include #include +#ifndef USER_BTN_PRESSED +#define USER_BTN_PRESSED LOW +#endif + #define AUTO_OFF_MILLIS 20000 // 20 seconds #define BOOT_SCREEN_MILLIS 4000 // 4 seconds @@ -85,7 +89,7 @@ void UITask::loop() { if (millis() >= _next_read) { int btnState = digitalRead(PIN_USER_BTN); if (btnState != _prevBtnState) { - if (btnState == LOW) { // pressed? + if (btnState == USER_BTN_PRESSED) { // pressed? if (_display->isOn()) { // TODO: any action ? } else { diff --git a/library.json b/library.json index aa37cb6ed0..8504793c23 100644 --- a/library.json +++ b/library.json @@ -4,7 +4,7 @@ "dependencies": { "SPI": "*", "Wire": "*", - "jgromes/RadioLib": "^7.3.0", + "jgromes/RadioLib": "^7.6.0", "rweather/Crypto": "^0.4.0", "adafruit/RTClib": "^2.1.3", "melopero/Melopero RV3028": "^1.1.0", diff --git a/mkdocs.yml b/mkdocs.yml index 3a76842f54..110680cd46 100644 --- a/mkdocs.yml +++ b/mkdocs.yml @@ -8,7 +8,7 @@ edit_uri: edit/main/docs/ theme: name: material - logo: _assets/meshcore_tm.svg + logo: _assets/meshcore.svg features: - content.action.edit - content.code.copy diff --git a/platformio.ini b/platformio.ini index ba601c26cd..864e5e1ffe 100644 --- a/platformio.ini +++ b/platformio.ini @@ -11,6 +11,7 @@ [platformio] extra_configs = variants/*/platformio.ini + platformio.local.ini [arduino_base] framework = arduino @@ -18,7 +19,7 @@ monitor_speed = 115200 lib_deps = SPI Wire - jgromes/RadioLib @ ^7.3.0 + jgromes/RadioLib @ ^7.6.0 rweather/Crypto @ ^0.4.0 adafruit/RTClib @ ^2.1.3 melopero/Melopero RV3028 @ ^1.1.0 @@ -65,7 +66,7 @@ build_src_filter = ${arduino_base.build_src_filter} [esp32_ota] lib_deps = - me-no-dev/ESPAsyncWebServer @ ^3.6.0 + ESP32Async/ESPAsyncWebServer @ 3.10.3 file://arch/esp32/AsyncElegantOTA ; esp32c6 uses arduino framework 3.x diff --git a/src/Mesh.cpp b/src/Mesh.cpp index 57fee14036..0c96e14da7 100644 --- a/src/Mesh.cpp +++ b/src/Mesh.cpp @@ -50,7 +50,9 @@ DispatcherAction Mesh::onRecvPacket(Packet* pkt) { uint8_t path_sz = flags & 0x03; // NEW v1.11+: lower 2 bits is path hash size uint8_t len = pkt->payload_len - i; - uint8_t offset = pkt->path_len << path_sz; + // path_len*entry_size can exceed 255 (path_len up to 63, entry_size up to 8); + // a uint8_t offset would wrap and steer the isHashMatch() read to the wrong place. + uint16_t offset = (uint16_t)pkt->path_len << path_sz; if (offset >= len) { // TRACE has reached end of given path onTraceRecv(pkt, trace_tag, auth_code, flags, pkt->path, &pkt->payload[i], len); } else if (self_id.isHashMatch(&pkt->payload[i + offset], 1 << path_sz) && allowPacketForward(pkt) && !_tables->hasSeen(pkt)) { diff --git a/src/helpers/AutoDiscoverRTCClock.cpp b/src/helpers/AutoDiscoverRTCClock.cpp index 5c3a4f1cc0..49a72893d9 100644 --- a/src/helpers/AutoDiscoverRTCClock.cpp +++ b/src/helpers/AutoDiscoverRTCClock.cpp @@ -1,6 +1,7 @@ #include "AutoDiscoverRTCClock.h" #include "RTClib.h" #include +#include "RTC_RX8130CE.h" static RTC_DS3231 rtc_3231; static bool ds3231_success = false; @@ -11,9 +12,13 @@ static bool rv3028_success = false; static RTC_PCF8563 rtc_8563; static bool rtc_8563_success = false; +static RTC_RX8130CE rtc_8130; +static bool rtc_8130_success = false; + #define DS3231_ADDRESS 0x68 #define RV3028_ADDRESS 0x52 #define PCF8563_ADDRESS 0x51 +#define RX8130CE_ADDRESS 0x32 bool AutoDiscoverRTCClock::i2c_probe(TwoWire& wire, uint8_t addr) { wire.beginTransmission(addr); @@ -25,22 +30,32 @@ void AutoDiscoverRTCClock::begin(TwoWire& wire) { if (i2c_probe(wire, DS3231_ADDRESS)) { ds3231_success = rtc_3231.begin(&wire); } + if (i2c_probe(wire, RV3028_ADDRESS)) { rtc_rv3028.initI2C(wire); - rtc_rv3028.writeToRegister(0x35, 0x00); - rtc_rv3028.writeToRegister(0x37, 0xB4); // Direct Switching Mode (DSM): when VDD < VBACKUP, switchover occurs from VDD to VBACKUP - rtc_rv3028.set24HourMode(); // Set the device to use the 24hour format (default) instead of the 12 hour format + rtc_rv3028.writeToRegister(0x35, 0x00); + rtc_rv3028.writeToRegister(0x37, 0xB4); // Direct Switching Mode (DSM): when VDD < VBACKUP, switchover occurs from VDD to VBACKUP + rtc_rv3028.set24HourMode(); // Set the device to use the 24hour format (default) instead of the 12 hour format rv3028_success = true; } - if(i2c_probe(wire,PCF8563_ADDRESS)){ + + if (i2c_probe(wire, PCF8563_ADDRESS)) { rtc_8563_success = rtc_8563.begin(&wire); } + + if (i2c_probe(wire, RX8130CE_ADDRESS)) { + MESH_DEBUG_PRINTLN("RX8130CE: Found"); + rtc_8130.begin(&wire); + rtc_8130_success = true; + MESH_DEBUG_PRINTLN("RX8130CE: Initialized"); + } } uint32_t AutoDiscoverRTCClock::getCurrentTime() { if (ds3231_success) { return rtc_3231.now().unixtime(); } + if (rv3028_success) { return DateTime( rtc_rv3028.getYear(), @@ -51,9 +66,16 @@ uint32_t AutoDiscoverRTCClock::getCurrentTime() { rtc_rv3028.getSecond() ).unixtime(); } - if(rtc_8563_success){ + + if (rtc_8563_success) { return rtc_8563.now().unixtime(); } + + if (rtc_8130_success) { + MESH_DEBUG_PRINTLN("RX8130CE: Reading time"); + return rtc_8130.now().unixtime(); + } + return _fallback->getCurrentTime(); } @@ -66,6 +88,9 @@ void AutoDiscoverRTCClock::setCurrentTime(uint32_t time) { rtc_rv3028.setTime(dt.year(), dt.month(), weekday, dt.day(), dt.hour(), dt.minute(), dt.second()); } else if (rtc_8563_success) { rtc_8563.adjust(DateTime(time)); + } else if (rtc_8130_success) { + MESH_DEBUG_PRINTLN("RX8130CE: Setting time"); + rtc_8130.adjust(DateTime(time)); } else { _fallback->setCurrentTime(time); } diff --git a/src/helpers/CommonCLI.cpp b/src/helpers/CommonCLI.cpp index 8b097c29fe..d495aada5f 100644 --- a/src/helpers/CommonCLI.cpp +++ b/src/helpers/CommonCLI.cpp @@ -207,7 +207,7 @@ uint8_t CommonCLI::buildAdvertData(uint8_t node_type, uint8_t* app_data) { } } -void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, char* reply) { +void CommonCLI::handleCommand(uint32_t sender_timestamp, char* command, char* reply) { if (memcmp(command, "poweroff", 8) == 0 || memcmp(command, "shutdown", 8) == 0) { _board->powerOff(); // doesn't return } else if (memcmp(command, "reboot", 6) == 0) { @@ -289,420 +289,10 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch } else if (memcmp(command, "clear stats", 11) == 0) { _callbacks->clearStats(); strcpy(reply, "(OK - stats reset)"); - /* - * GET commands - */ } else if (memcmp(command, "get ", 4) == 0) { - const char* config = &command[4]; - if (memcmp(config, "af", 2) == 0) { - sprintf(reply, "> %s", StrHelper::ftoa(_prefs->airtime_factor)); - } else if (memcmp(config, "int.thresh", 10) == 0) { - sprintf(reply, "> %d", (uint32_t) _prefs->interference_threshold); - } else if (memcmp(config, "agc.reset.interval", 18) == 0) { - sprintf(reply, "> %d", ((uint32_t) _prefs->agc_reset_interval) * 4); - } else if (memcmp(config, "multi.acks", 10) == 0) { - sprintf(reply, "> %d", (uint32_t) _prefs->multi_acks); - } else if (memcmp(config, "allow.read.only", 15) == 0) { - sprintf(reply, "> %s", _prefs->allow_read_only ? "on" : "off"); - } else if (memcmp(config, "flood.advert.interval", 21) == 0) { - sprintf(reply, "> %d", ((uint32_t) _prefs->flood_advert_interval)); - } else if (memcmp(config, "advert.interval", 15) == 0) { - sprintf(reply, "> %d", ((uint32_t) _prefs->advert_interval) * 2); - } else if (memcmp(config, "guest.password", 14) == 0) { - sprintf(reply, "> %s", _prefs->guest_password); - } else if (sender_timestamp == 0 && memcmp(config, "prv.key", 7) == 0) { // from serial command line only - uint8_t prv_key[PRV_KEY_SIZE]; - int len = _callbacks->getSelfId().writeTo(prv_key, PRV_KEY_SIZE); - mesh::Utils::toHex(tmp, prv_key, len); - sprintf(reply, "> %s", tmp); - } else if (memcmp(config, "name", 4) == 0) { - sprintf(reply, "> %s", _prefs->node_name); - } else if (memcmp(config, "repeat", 6) == 0) { - sprintf(reply, "> %s", _prefs->disable_fwd ? "off" : "on"); - } else if (memcmp(config, "lat", 3) == 0) { - sprintf(reply, "> %s", StrHelper::ftoa(_prefs->node_lat)); - } else if (memcmp(config, "lon", 3) == 0) { - sprintf(reply, "> %s", StrHelper::ftoa(_prefs->node_lon)); -#if defined(USE_SX1262) || defined(USE_SX1268) - } else if (memcmp(config, "radio.rxgain", 12) == 0) { - sprintf(reply, "> %s", _prefs->rx_boosted_gain ? "on" : "off"); -#endif - } else if (memcmp(config, "radio", 5) == 0) { - char freq[16], bw[16]; - strcpy(freq, StrHelper::ftoa(_prefs->freq)); - strcpy(bw, StrHelper::ftoa3(_prefs->bw)); - sprintf(reply, "> %s,%s,%d,%d", freq, bw, (uint32_t)_prefs->sf, (uint32_t)_prefs->cr); - } else if (memcmp(config, "rxdelay", 7) == 0) { - sprintf(reply, "> %s", StrHelper::ftoa(_prefs->rx_delay_base)); - } else if (memcmp(config, "txdelay", 7) == 0) { - sprintf(reply, "> %s", StrHelper::ftoa(_prefs->tx_delay_factor)); - } else if (memcmp(config, "flood.max", 9) == 0) { - sprintf(reply, "> %d", (uint32_t)_prefs->flood_max); - } else if (memcmp(config, "direct.txdelay", 14) == 0) { - sprintf(reply, "> %s", StrHelper::ftoa(_prefs->direct_tx_delay_factor)); - } else if (memcmp(config, "owner.info", 10) == 0) { - *reply++ = '>'; - *reply++ = ' '; - const char* sp = _prefs->owner_info; - while (*sp) { - *reply++ = (*sp == '\n') ? '|' : *sp; // translate newline back to orig '|' - sp++; - } - *reply = 0; // set null terminator - } else if (memcmp(config, "path.hash.mode", 14) == 0) { - sprintf(reply, "> %d", (uint32_t)_prefs->path_hash_mode); - } else if (memcmp(config, "loop.detect", 11) == 0) { - if (_prefs->loop_detect == LOOP_DETECT_OFF) { - strcpy(reply, "> off"); - } else if (_prefs->loop_detect == LOOP_DETECT_MINIMAL) { - strcpy(reply, "> minimal"); - } else if (_prefs->loop_detect == LOOP_DETECT_MODERATE) { - strcpy(reply, "> moderate"); - } else { - strcpy(reply, "> strict"); - } - } else if (memcmp(config, "tx", 2) == 0 && (config[2] == 0 || config[2] == ' ')) { - sprintf(reply, "> %d", (int32_t) _prefs->tx_power_dbm); - } else if (memcmp(config, "freq", 4) == 0) { - sprintf(reply, "> %s", StrHelper::ftoa(_prefs->freq)); - } else if (memcmp(config, "public.key", 10) == 0) { - strcpy(reply, "> "); - mesh::Utils::toHex(&reply[2], _callbacks->getSelfId().pub_key, PUB_KEY_SIZE); - } else if (memcmp(config, "role", 4) == 0) { - sprintf(reply, "> %s", _callbacks->getRole()); - } else if (memcmp(config, "bridge.type", 11) == 0) { - sprintf(reply, "> %s", -#ifdef WITH_RS232_BRIDGE - "rs232" -#elif WITH_ESPNOW_BRIDGE - "espnow" -#else - "none" -#endif - ); -#ifdef WITH_BRIDGE - } else if (memcmp(config, "bridge.enabled", 14) == 0) { - sprintf(reply, "> %s", _prefs->bridge_enabled ? "on" : "off"); - } else if (memcmp(config, "bridge.delay", 12) == 0) { - sprintf(reply, "> %d", (uint32_t)_prefs->bridge_delay); - } else if (memcmp(config, "bridge.source", 13) == 0) { - sprintf(reply, "> %s", _prefs->bridge_pkt_src ? "logRx" : "logTx"); -#endif -#ifdef WITH_RS232_BRIDGE - } else if (memcmp(config, "bridge.baud", 11) == 0) { - sprintf(reply, "> %d", (uint32_t)_prefs->bridge_baud); -#endif -#ifdef WITH_ESPNOW_BRIDGE - } else if (memcmp(config, "bridge.channel", 14) == 0) { - sprintf(reply, "> %d", (uint32_t)_prefs->bridge_channel); - } else if (memcmp(config, "bridge.secret", 13) == 0) { - sprintf(reply, "> %s", _prefs->bridge_secret); -#endif - } else if (memcmp(config, "bootloader.ver", 14) == 0) { - #ifdef NRF52_PLATFORM - char ver[32]; - if (_board->getBootloaderVersion(ver, sizeof(ver))) { - sprintf(reply, "> %s", ver); - } else { - strcpy(reply, "> unknown"); - } - #else - strcpy(reply, "ERROR: unsupported"); - #endif - } else if (memcmp(config, "adc.multiplier", 14) == 0) { - float adc_mult = _board->getAdcMultiplier(); - if (adc_mult == 0.0f) { - strcpy(reply, "Error: unsupported by this board"); - } else { - sprintf(reply, "> %.3f", adc_mult); - } - // Power management commands - } else if (memcmp(config, "pwrmgt.support", 14) == 0) { -#ifdef NRF52_POWER_MANAGEMENT - strcpy(reply, "> supported"); -#else - strcpy(reply, "> unsupported"); -#endif - } else if (memcmp(config, "pwrmgt.source", 13) == 0) { -#ifdef NRF52_POWER_MANAGEMENT - strcpy(reply, _board->isExternalPowered() ? "> external" : "> battery"); -#else - strcpy(reply, "ERROR: Power management not supported"); -#endif - } else if (memcmp(config, "pwrmgt.bootreason", 17) == 0) { -#ifdef NRF52_POWER_MANAGEMENT - sprintf(reply, "> Reset: %s; Shutdown: %s", - _board->getResetReasonString(_board->getResetReason()), - _board->getShutdownReasonString(_board->getShutdownReason())); -#else - strcpy(reply, "ERROR: Power management not supported"); -#endif - } else if (memcmp(config, "pwrmgt.bootmv", 13) == 0) { -#ifdef NRF52_POWER_MANAGEMENT - sprintf(reply, "> %u mV", _board->getBootVoltage()); -#else - strcpy(reply, "ERROR: Power management not supported"); -#endif - } else { - sprintf(reply, "??: %s", config); - } - /* - * SET commands - */ + handleGetCmd(sender_timestamp, command, reply); } else if (memcmp(command, "set ", 4) == 0) { - const char* config = &command[4]; - if (memcmp(config, "af ", 3) == 0) { - _prefs->airtime_factor = atof(&config[3]); - savePrefs(); - strcpy(reply, "OK"); - } else if (memcmp(config, "int.thresh ", 11) == 0) { - _prefs->interference_threshold = atoi(&config[11]); - savePrefs(); - strcpy(reply, "OK"); - } else if (memcmp(config, "agc.reset.interval ", 19) == 0) { - _prefs->agc_reset_interval = atoi(&config[19]) / 4; - savePrefs(); - sprintf(reply, "OK - interval rounded to %d", ((uint32_t) _prefs->agc_reset_interval) * 4); - } else if (memcmp(config, "multi.acks ", 11) == 0) { - _prefs->multi_acks = atoi(&config[11]); - savePrefs(); - strcpy(reply, "OK"); - } else if (memcmp(config, "allow.read.only ", 16) == 0) { - _prefs->allow_read_only = memcmp(&config[16], "on", 2) == 0; - savePrefs(); - strcpy(reply, "OK"); - } else if (memcmp(config, "flood.advert.interval ", 22) == 0) { - int hours = _atoi(&config[22]); - if ((hours > 0 && hours < 3) || (hours > 168)) { - strcpy(reply, "Error: interval range is 3-168 hours"); - } else { - _prefs->flood_advert_interval = (uint8_t)(hours); - _callbacks->updateFloodAdvertTimer(); - savePrefs(); - strcpy(reply, "OK"); - } - } else if (memcmp(config, "advert.interval ", 16) == 0) { - int mins = _atoi(&config[16]); - if ((mins > 0 && mins < MIN_LOCAL_ADVERT_INTERVAL) || (mins > 240)) { - sprintf(reply, "Error: interval range is %d-240 minutes", MIN_LOCAL_ADVERT_INTERVAL); - } else { - _prefs->advert_interval = (uint8_t)(mins / 2); - _callbacks->updateAdvertTimer(); - savePrefs(); - strcpy(reply, "OK"); - } - } else if (memcmp(config, "guest.password ", 15) == 0) { - StrHelper::strncpy(_prefs->guest_password, &config[15], sizeof(_prefs->guest_password)); - savePrefs(); - strcpy(reply, "OK"); - } else if (memcmp(config, "prv.key ", 8) == 0) { - uint8_t prv_key[PRV_KEY_SIZE]; - bool success = mesh::Utils::fromHex(prv_key, PRV_KEY_SIZE, &config[8]); - // only allow rekey if key is valid - if (success && mesh::LocalIdentity::validatePrivateKey(prv_key)) { - mesh::LocalIdentity new_id; - new_id.readFrom(prv_key, PRV_KEY_SIZE); - _callbacks->saveIdentity(new_id); - strcpy(reply, "OK, reboot to apply! New pubkey: "); - mesh::Utils::toHex(&reply[33], new_id.pub_key, PUB_KEY_SIZE); - } else { - strcpy(reply, "Error, bad key"); - } - } else if (memcmp(config, "name ", 5) == 0) { - if (isValidName(&config[5])) { - StrHelper::strncpy(_prefs->node_name, &config[5], sizeof(_prefs->node_name)); - savePrefs(); - strcpy(reply, "OK"); - } else { - strcpy(reply, "Error, bad chars"); - } - } else if (memcmp(config, "repeat ", 7) == 0) { - _prefs->disable_fwd = memcmp(&config[7], "off", 3) == 0; - savePrefs(); - strcpy(reply, _prefs->disable_fwd ? "OK - repeat is now OFF" : "OK - repeat is now ON"); -#if defined(USE_SX1262) || defined(USE_SX1268) - } else if (memcmp(config, "radio.rxgain ", 13) == 0) { - _prefs->rx_boosted_gain = memcmp(&config[13], "on", 2) == 0; - strcpy(reply, "OK"); - savePrefs(); - _callbacks->setRxBoostedGain(_prefs->rx_boosted_gain); -#endif - } else if (memcmp(config, "radio ", 6) == 0) { - strcpy(tmp, &config[6]); - const char *parts[4]; - int num = mesh::Utils::parseTextParts(tmp, parts, 4); - float freq = num > 0 ? strtof(parts[0], nullptr) : 0.0f; - float bw = num > 1 ? strtof(parts[1], nullptr) : 0.0f; - uint8_t sf = num > 2 ? atoi(parts[2]) : 0; - uint8_t cr = num > 3 ? atoi(parts[3]) : 0; - if (freq >= 150.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f) { - _prefs->sf = sf; - _prefs->cr = cr; - _prefs->freq = freq; - _prefs->bw = bw; - _callbacks->savePrefs(); - strcpy(reply, "OK - reboot to apply"); - } else { - strcpy(reply, "Error, invalid radio params"); - } - } else if (memcmp(config, "lat ", 4) == 0) { - _prefs->node_lat = atof(&config[4]); - savePrefs(); - strcpy(reply, "OK"); - } else if (memcmp(config, "lon ", 4) == 0) { - _prefs->node_lon = atof(&config[4]); - savePrefs(); - strcpy(reply, "OK"); - } else if (memcmp(config, "rxdelay ", 8) == 0) { - float db = atof(&config[8]); - if (db >= 0) { - _prefs->rx_delay_base = db; - savePrefs(); - strcpy(reply, "OK"); - } else { - strcpy(reply, "Error, cannot be negative"); - } - } else if (memcmp(config, "txdelay ", 8) == 0) { - float f = atof(&config[8]); - if (f >= 0) { - _prefs->tx_delay_factor = f; - savePrefs(); - strcpy(reply, "OK"); - } else { - strcpy(reply, "Error, cannot be negative"); - } - } else if (memcmp(config, "flood.max ", 10) == 0) { - uint8_t m = atoi(&config[10]); - if (m <= 64) { - _prefs->flood_max = m; - savePrefs(); - strcpy(reply, "OK"); - } else { - strcpy(reply, "Error, max 64"); - } - } else if (memcmp(config, "direct.txdelay ", 15) == 0) { - float f = atof(&config[15]); - if (f >= 0) { - _prefs->direct_tx_delay_factor = f; - savePrefs(); - strcpy(reply, "OK"); - } else { - strcpy(reply, "Error, cannot be negative"); - } - } else if (memcmp(config, "owner.info ", 11) == 0) { - config += 11; - char *dp = _prefs->owner_info; - while (*config && dp - _prefs->owner_info < sizeof(_prefs->owner_info)-1) { - *dp++ = (*config == '|') ? '\n' : *config; // translate '|' to newline chars - config++; - } - *dp = 0; - savePrefs(); - strcpy(reply, "OK"); - } else if (memcmp(config, "path.hash.mode ", 15) == 0) { - config += 15; - uint8_t mode = atoi(config); - if (mode < 3) { - _prefs->path_hash_mode = mode; - savePrefs(); - strcpy(reply, "OK"); - } else { - strcpy(reply, "Error, must be 0,1, or 2"); - } - } else if (memcmp(config, "loop.detect ", 12) == 0) { - config += 12; - uint8_t mode; - if (memcmp(config, "off", 3) == 0) { - mode = LOOP_DETECT_OFF; - } else if (memcmp(config, "minimal", 7) == 0) { - mode = LOOP_DETECT_MINIMAL; - } else if (memcmp(config, "moderate", 8) == 0) { - mode = LOOP_DETECT_MODERATE; - } else if (memcmp(config, "strict", 6) == 0) { - mode = LOOP_DETECT_STRICT; - } else { - mode = 0xFF; - strcpy(reply, "Error, must be: off, minimal, moderate, or strict"); - } - if (mode != 0xFF) { - _prefs->loop_detect = mode; - savePrefs(); - strcpy(reply, "OK"); - } - } else if (memcmp(config, "tx ", 3) == 0) { - _prefs->tx_power_dbm = atoi(&config[3]); - savePrefs(); - _callbacks->setTxPower(_prefs->tx_power_dbm); - strcpy(reply, "OK"); - } else if (sender_timestamp == 0 && memcmp(config, "freq ", 5) == 0) { - _prefs->freq = atof(&config[5]); - savePrefs(); - strcpy(reply, "OK - reboot to apply"); -#ifdef WITH_BRIDGE - } else if (memcmp(config, "bridge.enabled ", 15) == 0) { - _prefs->bridge_enabled = memcmp(&config[15], "on", 2) == 0; - _callbacks->setBridgeState(_prefs->bridge_enabled); - savePrefs(); - strcpy(reply, "OK"); - } else if (memcmp(config, "bridge.delay ", 13) == 0) { - int delay = _atoi(&config[13]); - if (delay >= 0 && delay <= 10000) { - _prefs->bridge_delay = (uint16_t)delay; - savePrefs(); - strcpy(reply, "OK"); - } else { - strcpy(reply, "Error: delay must be between 0-10000 ms"); - } - } else if (memcmp(config, "bridge.source ", 14) == 0) { - _prefs->bridge_pkt_src = memcmp(&config[14], "rx", 2) == 0; - savePrefs(); - strcpy(reply, "OK"); -#endif -#ifdef WITH_RS232_BRIDGE - } else if (memcmp(config, "bridge.baud ", 12) == 0) { - uint32_t baud = atoi(&config[12]); - if (baud >= 9600 && baud <= BRIDGE_MAX_BAUD) { - _prefs->bridge_baud = (uint32_t)baud; - _callbacks->restartBridge(); - savePrefs(); - strcpy(reply, "OK"); - } else { - sprintf(reply, "Error: baud rate must be between 9600-%d",BRIDGE_MAX_BAUD); - } -#endif -#ifdef WITH_ESPNOW_BRIDGE - } else if (memcmp(config, "bridge.channel ", 15) == 0) { - int ch = atoi(&config[15]); - if (ch > 0 && ch < 15) { - _prefs->bridge_channel = (uint8_t)ch; - _callbacks->restartBridge(); - savePrefs(); - strcpy(reply, "OK"); - } else { - strcpy(reply, "Error: channel must be between 1-14"); - } - } else if (memcmp(config, "bridge.secret ", 14) == 0) { - StrHelper::strncpy(_prefs->bridge_secret, &config[14], sizeof(_prefs->bridge_secret)); - _callbacks->restartBridge(); - savePrefs(); - strcpy(reply, "OK"); -#endif - } else if (memcmp(config, "adc.multiplier ", 15) == 0) { - _prefs->adc_multiplier = atof(&config[15]); - if (_board->setAdcMultiplier(_prefs->adc_multiplier)) { - savePrefs(); - if (_prefs->adc_multiplier == 0.0f) { - strcpy(reply, "OK - using default board multiplier"); - } else { - sprintf(reply, "OK - multiplier set to %.3f", _prefs->adc_multiplier); - } - } else { - _prefs->adc_multiplier = 0.0f; - strcpy(reply, "Error: unsupported by this board"); - }; - } else { - sprintf(reply, "unknown config: %s", config); - } + handleSetCmd(sender_timestamp, command, reply); } else if (sender_timestamp == 0 && strcmp(command, "erase") == 0) { bool s = _callbacks->formatFileSystem(); sprintf(reply, "File system erase: %s", s ? "OK" : "Err"); @@ -754,6 +344,8 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch *(dp-1) = 0; // remove last CR } } + } else if (memcmp(command, "region", 6) == 0) { + handleRegionCmd(command, reply); #if ENV_INCLUDE_GPS == 1 } else if (memcmp(command, "gps on", 6) == 0) { if (_sensors->setSettingValue("gps", "1")) { @@ -869,3 +461,557 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch strcpy(reply, "Unknown command"); } } + +void CommonCLI::handleSetCmd(uint32_t sender_timestamp, char* command, char* reply) { + const char* config = &command[4]; + if (memcmp(config, "dutycycle ", 10) == 0) { + float dc = atof(&config[10]); + if (dc < 1 || dc > 100) { + strcpy(reply, "ERROR: dutycycle must be 1-100"); + } else { + _prefs->airtime_factor = (100.0f / dc) - 1.0f; + savePrefs(); + float actual = 100.0f / (_prefs->airtime_factor + 1.0f); + int a_int = (int)actual; + int a_frac = (int)((actual - a_int) * 10.0f + 0.5f); + sprintf(reply, "OK - %d.%d%%", a_int, a_frac); + } + } else if (memcmp(config, "af ", 3) == 0) { + _prefs->airtime_factor = atof(&config[3]); + savePrefs(); + strcpy(reply, "OK"); + } else if (memcmp(config, "int.thresh ", 11) == 0) { + _prefs->interference_threshold = atoi(&config[11]); + savePrefs(); + strcpy(reply, "OK"); + } else if (memcmp(config, "agc.reset.interval ", 19) == 0) { + _prefs->agc_reset_interval = atoi(&config[19]) / 4; + savePrefs(); + sprintf(reply, "OK - interval rounded to %d", ((uint32_t) _prefs->agc_reset_interval) * 4); + } else if (memcmp(config, "multi.acks ", 11) == 0) { + _prefs->multi_acks = atoi(&config[11]); + savePrefs(); + strcpy(reply, "OK"); + } else if (memcmp(config, "allow.read.only ", 16) == 0) { + _prefs->allow_read_only = memcmp(&config[16], "on", 2) == 0; + savePrefs(); + strcpy(reply, "OK"); + } else if (memcmp(config, "flood.advert.interval ", 22) == 0) { + int hours = _atoi(&config[22]); + if ((hours > 0 && hours < 3) || (hours > 168)) { + strcpy(reply, "Error: interval range is 3-168 hours"); + } else { + _prefs->flood_advert_interval = (uint8_t)(hours); + _callbacks->updateFloodAdvertTimer(); + savePrefs(); + strcpy(reply, "OK"); + } + } else if (memcmp(config, "advert.interval ", 16) == 0) { + int mins = _atoi(&config[16]); + if ((mins > 0 && mins < MIN_LOCAL_ADVERT_INTERVAL) || (mins > 240)) { + sprintf(reply, "Error: interval range is %d-240 minutes", MIN_LOCAL_ADVERT_INTERVAL); + } else { + _prefs->advert_interval = (uint8_t)(mins / 2); + _callbacks->updateAdvertTimer(); + savePrefs(); + strcpy(reply, "OK"); + } + } else if (memcmp(config, "guest.password ", 15) == 0) { + StrHelper::strncpy(_prefs->guest_password, &config[15], sizeof(_prefs->guest_password)); + savePrefs(); + strcpy(reply, "OK"); + } else if (memcmp(config, "prv.key ", 8) == 0) { + uint8_t prv_key[PRV_KEY_SIZE]; + bool success = mesh::Utils::fromHex(prv_key, PRV_KEY_SIZE, &config[8]); + // only allow rekey if key is valid + if (success && mesh::LocalIdentity::validatePrivateKey(prv_key)) { + mesh::LocalIdentity new_id; + new_id.readFrom(prv_key, PRV_KEY_SIZE); + _callbacks->saveIdentity(new_id); + strcpy(reply, "OK, reboot to apply! New pubkey: "); + mesh::Utils::toHex(&reply[33], new_id.pub_key, PUB_KEY_SIZE); + } else { + strcpy(reply, "Error, bad key"); + } + } else if (memcmp(config, "name ", 5) == 0) { + if (isValidName(&config[5])) { + StrHelper::strncpy(_prefs->node_name, &config[5], sizeof(_prefs->node_name)); + savePrefs(); + strcpy(reply, "OK"); + } else { + strcpy(reply, "Error, bad chars"); + } + } else if (memcmp(config, "repeat ", 7) == 0) { + _prefs->disable_fwd = memcmp(&config[7], "off", 3) == 0; + savePrefs(); + strcpy(reply, _prefs->disable_fwd ? "OK - repeat is now OFF" : "OK - repeat is now ON"); +#if defined(USE_SX1262) || defined(USE_SX1268) + } else if (memcmp(config, "radio.rxgain ", 13) == 0) { + _prefs->rx_boosted_gain = memcmp(&config[13], "on", 2) == 0; + strcpy(reply, "OK"); + savePrefs(); + _callbacks->setRxBoostedGain(_prefs->rx_boosted_gain); +#endif + } else if (memcmp(config, "radio ", 6) == 0) { + strcpy(tmp, &config[6]); + const char *parts[4]; + int num = mesh::Utils::parseTextParts(tmp, parts, 4); + float freq = num > 0 ? strtof(parts[0], nullptr) : 0.0f; + float bw = num > 1 ? strtof(parts[1], nullptr) : 0.0f; + uint8_t sf = num > 2 ? atoi(parts[2]) : 0; + uint8_t cr = num > 3 ? atoi(parts[3]) : 0; + if (freq >= 150.0f && freq <= 2500.0f && sf >= 5 && sf <= 12 && cr >= 5 && cr <= 8 && bw >= 7.0f && bw <= 500.0f) { + _prefs->sf = sf; + _prefs->cr = cr; + _prefs->freq = freq; + _prefs->bw = bw; + _callbacks->savePrefs(); + strcpy(reply, "OK - reboot to apply"); + } else { + strcpy(reply, "Error, invalid radio params"); + } + } else if (memcmp(config, "lat ", 4) == 0) { + _prefs->node_lat = atof(&config[4]); + savePrefs(); + strcpy(reply, "OK"); + } else if (memcmp(config, "lon ", 4) == 0) { + _prefs->node_lon = atof(&config[4]); + savePrefs(); + strcpy(reply, "OK"); + } else if (memcmp(config, "rxdelay ", 8) == 0) { + float db = atof(&config[8]); + if (db >= 0) { + _prefs->rx_delay_base = db; + savePrefs(); + strcpy(reply, "OK"); + } else { + strcpy(reply, "Error, cannot be negative"); + } + } else if (memcmp(config, "txdelay ", 8) == 0) { + float f = atof(&config[8]); + if (f >= 0) { + _prefs->tx_delay_factor = f; + savePrefs(); + strcpy(reply, "OK"); + } else { + strcpy(reply, "Error, cannot be negative"); + } + } else if (memcmp(config, "flood.max ", 10) == 0) { + uint8_t m = atoi(&config[10]); + if (m <= 64) { + _prefs->flood_max = m; + savePrefs(); + strcpy(reply, "OK"); + } else { + strcpy(reply, "Error, max 64"); + } + } else if (memcmp(config, "direct.txdelay ", 15) == 0) { + float f = atof(&config[15]); + if (f >= 0) { + _prefs->direct_tx_delay_factor = f; + savePrefs(); + strcpy(reply, "OK"); + } else { + strcpy(reply, "Error, cannot be negative"); + } + } else if (memcmp(config, "owner.info ", 11) == 0) { + config += 11; + char *dp = _prefs->owner_info; + while (*config && dp - _prefs->owner_info < sizeof(_prefs->owner_info)-1) { + *dp++ = (*config == '|') ? '\n' : *config; // translate '|' to newline chars + config++; + } + *dp = 0; + savePrefs(); + strcpy(reply, "OK"); + } else if (memcmp(config, "path.hash.mode ", 15) == 0) { + config += 15; + uint8_t mode = atoi(config); + if (mode < 3) { + _prefs->path_hash_mode = mode; + savePrefs(); + strcpy(reply, "OK"); + } else { + strcpy(reply, "Error, must be 0,1, or 2"); + } + } else if (memcmp(config, "loop.detect ", 12) == 0) { + config += 12; + uint8_t mode; + if (memcmp(config, "off", 3) == 0) { + mode = LOOP_DETECT_OFF; + } else if (memcmp(config, "minimal", 7) == 0) { + mode = LOOP_DETECT_MINIMAL; + } else if (memcmp(config, "moderate", 8) == 0) { + mode = LOOP_DETECT_MODERATE; + } else if (memcmp(config, "strict", 6) == 0) { + mode = LOOP_DETECT_STRICT; + } else { + mode = 0xFF; + strcpy(reply, "Error, must be: off, minimal, moderate, or strict"); + } + if (mode != 0xFF) { + _prefs->loop_detect = mode; + savePrefs(); + strcpy(reply, "OK"); + } + } else if (memcmp(config, "tx ", 3) == 0) { + _prefs->tx_power_dbm = atoi(&config[3]); + savePrefs(); + _callbacks->setTxPower(_prefs->tx_power_dbm); + strcpy(reply, "OK"); + } else if (sender_timestamp == 0 && memcmp(config, "freq ", 5) == 0) { + _prefs->freq = atof(&config[5]); + savePrefs(); + strcpy(reply, "OK - reboot to apply"); +#ifdef WITH_BRIDGE + } else if (memcmp(config, "bridge.enabled ", 15) == 0) { + _prefs->bridge_enabled = memcmp(&config[15], "on", 2) == 0; + _callbacks->setBridgeState(_prefs->bridge_enabled); + savePrefs(); + strcpy(reply, "OK"); + } else if (memcmp(config, "bridge.delay ", 13) == 0) { + int delay = _atoi(&config[13]); + if (delay >= 0 && delay <= 10000) { + _prefs->bridge_delay = (uint16_t)delay; + savePrefs(); + strcpy(reply, "OK"); + } else { + strcpy(reply, "Error: delay must be between 0-10000 ms"); + } + } else if (memcmp(config, "bridge.source ", 14) == 0) { + _prefs->bridge_pkt_src = memcmp(&config[14], "rx", 2) == 0; + savePrefs(); + strcpy(reply, "OK"); +#endif +#ifdef WITH_RS232_BRIDGE + } else if (memcmp(config, "bridge.baud ", 12) == 0) { + uint32_t baud = atoi(&config[12]); + if (baud >= 9600 && baud <= BRIDGE_MAX_BAUD) { + _prefs->bridge_baud = (uint32_t)baud; + _callbacks->restartBridge(); + savePrefs(); + strcpy(reply, "OK"); + } else { + sprintf(reply, "Error: baud rate must be between 9600-%d",BRIDGE_MAX_BAUD); + } +#endif +#ifdef WITH_ESPNOW_BRIDGE + } else if (memcmp(config, "bridge.channel ", 15) == 0) { + int ch = atoi(&config[15]); + if (ch > 0 && ch < 15) { + _prefs->bridge_channel = (uint8_t)ch; + _callbacks->restartBridge(); + savePrefs(); + strcpy(reply, "OK"); + } else { + strcpy(reply, "Error: channel must be between 1-14"); + } + } else if (memcmp(config, "bridge.secret ", 14) == 0) { + StrHelper::strncpy(_prefs->bridge_secret, &config[14], sizeof(_prefs->bridge_secret)); + _callbacks->restartBridge(); + savePrefs(); + strcpy(reply, "OK"); +#endif + } else if (memcmp(config, "adc.multiplier ", 15) == 0) { + _prefs->adc_multiplier = atof(&config[15]); + if (_board->setAdcMultiplier(_prefs->adc_multiplier)) { + savePrefs(); + if (_prefs->adc_multiplier == 0.0f) { + strcpy(reply, "OK - using default board multiplier"); + } else { + sprintf(reply, "OK - multiplier set to %.3f", _prefs->adc_multiplier); + } + } else { + _prefs->adc_multiplier = 0.0f; + strcpy(reply, "Error: unsupported by this board"); + }; + } else { + sprintf(reply, "unknown config: %s", config); + } +} + +void CommonCLI::handleGetCmd(uint32_t sender_timestamp, char* command, char* reply) { + const char* config = &command[4]; + if (memcmp(config, "dutycycle", 9) == 0) { + float dc = 100.0f / (_prefs->airtime_factor + 1.0f); + int dc_int = (int)dc; + int dc_frac = (int)((dc - dc_int) * 10.0f + 0.5f); + sprintf(reply, "> %d.%d%%", dc_int, dc_frac); + } else if (memcmp(config, "af", 2) == 0) { + sprintf(reply, "> %s", StrHelper::ftoa(_prefs->airtime_factor)); + } else if (memcmp(config, "int.thresh", 10) == 0) { + sprintf(reply, "> %d", (uint32_t) _prefs->interference_threshold); + } else if (memcmp(config, "agc.reset.interval", 18) == 0) { + sprintf(reply, "> %d", ((uint32_t) _prefs->agc_reset_interval) * 4); + } else if (memcmp(config, "multi.acks", 10) == 0) { + sprintf(reply, "> %d", (uint32_t) _prefs->multi_acks); + } else if (memcmp(config, "allow.read.only", 15) == 0) { + sprintf(reply, "> %s", _prefs->allow_read_only ? "on" : "off"); + } else if (memcmp(config, "flood.advert.interval", 21) == 0) { + sprintf(reply, "> %d", ((uint32_t) _prefs->flood_advert_interval)); + } else if (memcmp(config, "advert.interval", 15) == 0) { + sprintf(reply, "> %d", ((uint32_t) _prefs->advert_interval) * 2); + } else if (memcmp(config, "guest.password", 14) == 0) { + sprintf(reply, "> %s", _prefs->guest_password); + } else if (sender_timestamp == 0 && memcmp(config, "prv.key", 7) == 0) { // from serial command line only + uint8_t prv_key[PRV_KEY_SIZE]; + int len = _callbacks->getSelfId().writeTo(prv_key, PRV_KEY_SIZE); + mesh::Utils::toHex(tmp, prv_key, len); + sprintf(reply, "> %s", tmp); + } else if (memcmp(config, "name", 4) == 0) { + sprintf(reply, "> %s", _prefs->node_name); + } else if (memcmp(config, "repeat", 6) == 0) { + sprintf(reply, "> %s", _prefs->disable_fwd ? "off" : "on"); + } else if (memcmp(config, "lat", 3) == 0) { + sprintf(reply, "> %s", StrHelper::ftoa(_prefs->node_lat)); + } else if (memcmp(config, "lon", 3) == 0) { + sprintf(reply, "> %s", StrHelper::ftoa(_prefs->node_lon)); +#if defined(USE_SX1262) || defined(USE_SX1268) + } else if (memcmp(config, "radio.rxgain", 12) == 0) { + sprintf(reply, "> %s", _prefs->rx_boosted_gain ? "on" : "off"); +#endif + } else if (memcmp(config, "radio", 5) == 0) { + char freq[16], bw[16]; + strcpy(freq, StrHelper::ftoa(_prefs->freq)); + strcpy(bw, StrHelper::ftoa3(_prefs->bw)); + sprintf(reply, "> %s,%s,%d,%d", freq, bw, (uint32_t)_prefs->sf, (uint32_t)_prefs->cr); + } else if (memcmp(config, "rxdelay", 7) == 0) { + sprintf(reply, "> %s", StrHelper::ftoa(_prefs->rx_delay_base)); + } else if (memcmp(config, "txdelay", 7) == 0) { + sprintf(reply, "> %s", StrHelper::ftoa(_prefs->tx_delay_factor)); + } else if (memcmp(config, "flood.max", 9) == 0) { + sprintf(reply, "> %d", (uint32_t)_prefs->flood_max); + } else if (memcmp(config, "direct.txdelay", 14) == 0) { + sprintf(reply, "> %s", StrHelper::ftoa(_prefs->direct_tx_delay_factor)); + } else if (memcmp(config, "owner.info", 10) == 0) { + *reply++ = '>'; + *reply++ = ' '; + const char* sp = _prefs->owner_info; + while (*sp) { + *reply++ = (*sp == '\n') ? '|' : *sp; // translate newline back to orig '|' + sp++; + } + *reply = 0; // set null terminator + } else if (memcmp(config, "path.hash.mode", 14) == 0) { + sprintf(reply, "> %d", (uint32_t)_prefs->path_hash_mode); + } else if (memcmp(config, "loop.detect", 11) == 0) { + if (_prefs->loop_detect == LOOP_DETECT_OFF) { + strcpy(reply, "> off"); + } else if (_prefs->loop_detect == LOOP_DETECT_MINIMAL) { + strcpy(reply, "> minimal"); + } else if (_prefs->loop_detect == LOOP_DETECT_MODERATE) { + strcpy(reply, "> moderate"); + } else { + strcpy(reply, "> strict"); + } + } else if (memcmp(config, "tx", 2) == 0 && (config[2] == 0 || config[2] == ' ')) { + sprintf(reply, "> %d", (int32_t) _prefs->tx_power_dbm); + } else if (memcmp(config, "freq", 4) == 0) { + sprintf(reply, "> %s", StrHelper::ftoa(_prefs->freq)); + } else if (memcmp(config, "public.key", 10) == 0) { + strcpy(reply, "> "); + mesh::Utils::toHex(&reply[2], _callbacks->getSelfId().pub_key, PUB_KEY_SIZE); + } else if (memcmp(config, "role", 4) == 0) { + sprintf(reply, "> %s", _callbacks->getRole()); + } else if (memcmp(config, "bridge.type", 11) == 0) { + sprintf(reply, "> %s", +#ifdef WITH_RS232_BRIDGE + "rs232" +#elif WITH_ESPNOW_BRIDGE + "espnow" +#else + "none" +#endif + ); +#ifdef WITH_BRIDGE + } else if (memcmp(config, "bridge.enabled", 14) == 0) { + sprintf(reply, "> %s", _prefs->bridge_enabled ? "on" : "off"); + } else if (memcmp(config, "bridge.delay", 12) == 0) { + sprintf(reply, "> %d", (uint32_t)_prefs->bridge_delay); + } else if (memcmp(config, "bridge.source", 13) == 0) { + sprintf(reply, "> %s", _prefs->bridge_pkt_src ? "logRx" : "logTx"); +#endif +#ifdef WITH_RS232_BRIDGE + } else if (memcmp(config, "bridge.baud", 11) == 0) { + sprintf(reply, "> %d", (uint32_t)_prefs->bridge_baud); +#endif +#ifdef WITH_ESPNOW_BRIDGE + } else if (memcmp(config, "bridge.channel", 14) == 0) { + sprintf(reply, "> %d", (uint32_t)_prefs->bridge_channel); + } else if (memcmp(config, "bridge.secret", 13) == 0) { + sprintf(reply, "> %s", _prefs->bridge_secret); +#endif + } else if (memcmp(config, "bootloader.ver", 14) == 0) { + #ifdef NRF52_PLATFORM + char ver[32]; + if (_board->getBootloaderVersion(ver, sizeof(ver))) { + sprintf(reply, "> %s", ver); + } else { + strcpy(reply, "> unknown"); + } + #else + strcpy(reply, "ERROR: unsupported"); + #endif + } else if (memcmp(config, "adc.multiplier", 14) == 0) { + float adc_mult = _board->getAdcMultiplier(); + if (adc_mult == 0.0f) { + strcpy(reply, "Error: unsupported by this board"); + } else { + sprintf(reply, "> %.3f", adc_mult); + } + // Power management commands + } else if (memcmp(config, "pwrmgt.support", 14) == 0) { +#ifdef NRF52_POWER_MANAGEMENT + strcpy(reply, "> supported"); +#else + strcpy(reply, "> unsupported"); +#endif + } else if (memcmp(config, "pwrmgt.source", 13) == 0) { +#ifdef NRF52_POWER_MANAGEMENT + strcpy(reply, _board->isExternalPowered() ? "> external" : "> battery"); +#else + strcpy(reply, "ERROR: Power management not supported"); +#endif + } else if (memcmp(config, "pwrmgt.bootreason", 17) == 0) { +#ifdef NRF52_POWER_MANAGEMENT + sprintf(reply, "> Reset: %s; Shutdown: %s", + _board->getResetReasonString(_board->getResetReason()), + _board->getShutdownReasonString(_board->getShutdownReason())); +#else + strcpy(reply, "ERROR: Power management not supported"); +#endif + } else if (memcmp(config, "pwrmgt.bootmv", 13) == 0) { +#ifdef NRF52_POWER_MANAGEMENT + sprintf(reply, "> %u mV", _board->getBootVoltage()); +#else + strcpy(reply, "ERROR: Power management not supported"); +#endif + } else { + sprintf(reply, "??: %s", config); + } +} + +void CommonCLI::handleRegionCmd(char* command, char* reply) { + reply[0] = 0; + + const char* parts[4]; + int n = mesh::Utils::parseTextParts(command, parts, 4, ' '); + if (n == 1) { + _region_map->exportTo(reply, 160); + } else if (n >= 2 && strcmp(parts[1], "load") == 0) { + _callbacks->startRegionsLoad(); + } else if (n >= 2 && strcmp(parts[1], "save") == 0) { + _prefs->discovery_mod_timestamp = getRTCClock()->getCurrentTime(); // this node is now 'modified' (for discovery info) + savePrefs(); + bool success = _callbacks->saveRegions(); + strcpy(reply, success ? "OK" : "Err - save failed"); + } else if (n >= 3 && strcmp(parts[1], "allowf") == 0) { + auto region = _region_map->findByNamePrefix(parts[2]); + if (region) { + region->flags &= ~REGION_DENY_FLOOD; + strcpy(reply, "OK"); + } else { + strcpy(reply, "Err - unknown region"); + } + } else if (n >= 3 && strcmp(parts[1], "denyf") == 0) { + auto region = _region_map->findByNamePrefix(parts[2]); + if (region) { + region->flags |= REGION_DENY_FLOOD; + strcpy(reply, "OK"); + } else { + strcpy(reply, "Err - unknown region"); + } + } else if (n >= 3 && strcmp(parts[1], "get") == 0) { + auto region = _region_map->findByNamePrefix(parts[2]); + if (region) { + auto parent = _region_map->findById(region->parent); + if (parent && parent->id != 0) { + sprintf(reply, " %s (%s) %s", region->name, parent->name, (region->flags & REGION_DENY_FLOOD) ? "" : "F"); + } else { + sprintf(reply, " %s %s", region->name, (region->flags & REGION_DENY_FLOOD) ? "" : "F"); + } + } else { + strcpy(reply, "Err - unknown region"); + } + } else if (n >= 3 && strcmp(parts[1], "home") == 0) { + auto home = _region_map->findByNamePrefix(parts[2]); + if (home) { + _region_map->setHomeRegion(home); + sprintf(reply, " home is now %s", home->name); + } else { + strcpy(reply, "Err - unknown region"); + } + } else if (n == 2 && strcmp(parts[1], "home") == 0) { + auto home = _region_map->getHomeRegion(); + sprintf(reply, " home is %s", home ? home->name : "*"); + } else if (n >= 3 && strcmp(parts[1], "default") == 0) { + if (strcmp(parts[2], "") == 0) { + _region_map->setDefaultRegion(NULL); + _callbacks->onDefaultRegionChanged(NULL); + _callbacks->saveRegions(); // persist in one atomic step + sprintf(reply, " default scope is now "); + } else { + auto def = _region_map->findByNamePrefix(parts[2]); + if (def == NULL) { + def = _region_map->putRegion(parts[2], 0); // auto-create the default region + } + if (def) { + def->flags = 0; // make sure allow flood enabled + _region_map->setDefaultRegion(def); + _callbacks->onDefaultRegionChanged(def); + _callbacks->saveRegions(); // persist in one atomic step + sprintf(reply, " default scope is now %s", def->name); + } else { + strcpy(reply, "Err - region table full"); + } + } + } else if (n == 2 && strcmp(parts[1], "default") == 0) { + auto def = _region_map->getDefaultRegion(); + sprintf(reply, " default scope is %s", def ? def->name : ""); + } else if (n >= 3 && strcmp(parts[1], "put") == 0) { + auto parent = n >= 4 ? _region_map->findByNamePrefix(parts[3]) : &(_region_map->getWildcard()); + if (parent == NULL) { + strcpy(reply, "Err - unknown parent"); + } else { + auto region = _region_map->putRegion(parts[2], parent->id); + if (region == NULL) { + strcpy(reply, "Err - unable to put"); + } else { + region->flags = 0; // New default: enable flood + strcpy(reply, "OK - (flood allowed)"); + } + } + } else if (n >= 3 && strcmp(parts[1], "remove") == 0) { + auto region = _region_map->findByName(parts[2]); + if (region) { + if (_region_map->removeRegion(*region)) { + strcpy(reply, "OK"); + } else { + strcpy(reply, "Err - not empty"); + } + } else { + strcpy(reply, "Err - not found"); + } + } else if (n >= 3 && strcmp(parts[1], "list") == 0) { + uint8_t mask = 0; + bool invert = false; + + if (strcmp(parts[2], "allowed") == 0) { + mask = REGION_DENY_FLOOD; + invert = false; // list regions that DON'T have DENY flag + } else if (strcmp(parts[2], "denied") == 0) { + mask = REGION_DENY_FLOOD; + invert = true; // list regions that DO have DENY flag + } else { + strcpy(reply, "Err - use 'allowed' or 'denied'"); + return; + } + + int len = _region_map->exportNamesTo(reply, 160, mask, invert); + if (len == 0) { + strcpy(reply, "-none-"); + } + } else { + strcpy(reply, "Err - ??"); + } +} diff --git a/src/helpers/CommonCLI.h b/src/helpers/CommonCLI.h index 3a4332d1f2..ffdc7c6536 100644 --- a/src/helpers/CommonCLI.h +++ b/src/helpers/CommonCLI.h @@ -4,6 +4,7 @@ #include #include #include +#include #if defined(WITH_RS232_BRIDGE) || defined(WITH_ESPNOW_BRIDGE) #define WITH_BRIDGE @@ -88,6 +89,16 @@ class CommonCLICallbacks { virtual void clearStats() = 0; virtual void applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) = 0; + virtual void startRegionsLoad() { + // no op by default + } + virtual bool saveRegions() { + return false; + } + virtual void onDefaultRegionChanged(const RegionEntry* r) { + // no op by default + } + virtual void setBridgeState(bool enable) { // no op by default }; @@ -107,6 +118,7 @@ class CommonCLI { CommonCLICallbacks* _callbacks; mesh::MainBoard* _board; SensorManager* _sensors; + RegionMap* _region_map; ClientACL* _acl; char tmp[PRV_KEY_SIZE*2 + 4]; @@ -114,12 +126,16 @@ class CommonCLI { void savePrefs(); void loadPrefsInt(FILESYSTEM* _fs, const char* filename); + void handleRegionCmd(char* command, char* reply); + void handleGetCmd(uint32_t sender_timestamp, char* command, char* reply); + void handleSetCmd(uint32_t sender_timestamp, char* command, char* reply); + public: - CommonCLI(mesh::MainBoard& board, mesh::RTCClock& rtc, SensorManager& sensors, ClientACL& acl, NodePrefs* prefs, CommonCLICallbacks* callbacks) - : _board(&board), _rtc(&rtc), _sensors(&sensors), _acl(&acl), _prefs(prefs), _callbacks(callbacks) { } + CommonCLI(mesh::MainBoard& board, mesh::RTCClock& rtc, SensorManager& sensors, RegionMap& region_map, ClientACL& acl, NodePrefs* prefs, CommonCLICallbacks* callbacks) + : _board(&board), _rtc(&rtc), _sensors(&sensors), _region_map(®ion_map), _acl(&acl), _prefs(prefs), _callbacks(callbacks) { } void loadPrefs(FILESYSTEM* _fs); void savePrefs(FILESYSTEM* _fs); - void handleCommand(uint32_t sender_timestamp, const char* command, char* reply); + void handleCommand(uint32_t sender_timestamp, char* command, char* reply); uint8_t buildAdvertData(uint8_t node_type, uint8_t* app_data); }; diff --git a/src/helpers/ESP32Board.h b/src/helpers/ESP32Board.h index bade3e8980..c2d78ae08f 100644 --- a/src/helpers/ESP32Board.h +++ b/src/helpers/ESP32Board.h @@ -3,6 +3,10 @@ #include #include +#ifndef USER_BTN_PRESSED +#define USER_BTN_PRESSED LOW +#endif + #if defined(ESP_PLATFORM) #include diff --git a/src/helpers/RTC_RX8130CE.cpp b/src/helpers/RTC_RX8130CE.cpp new file mode 100644 index 0000000000..8aa2b1ff3a --- /dev/null +++ b/src/helpers/RTC_RX8130CE.cpp @@ -0,0 +1,197 @@ +#include "RTC_RX8130CE.h" +#include "RTClib.h" + + +bool RTC_RX8130CE::stop(bool stop) { + write_register(0x1E, stop ? 0x040 : 0x00); + return true; +} + +bool RTC_RX8130CE::begin(TwoWire *wire) { + if (i2c_dev) { + delete i2c_dev; + } + + i2c_dev = new Adafruit_I2CDevice(this->_addr, wire); + if (!i2c_dev->begin()) { + return false; + } + + /* + * Digital offset register: + * [7] DET: 0 -> disabled + * [6:0] L7-L1: 0 -> no offset + */ + write_register(0x30, 0x00); + + /* + * Extension Register register: + * [7:6] FSEL: 0 -> 0 + * [5] USEL: 0 -> 0 + * [4] TE: 0 -> + * [3] WADA: 0 -> 0 + * [2-0] TSEL: 0 -> 0 + */ + write_register(0x1C, 0x00); + + /* + * Flag Register register: + * [7] VBLF: 0 -> 0 + * [6] 0: 0 -> + * [5] UF: 0 -> + * [4] TF: 0 -> + * [3] AF: 0 -> 0 + * [2] RSF: 0 -> 0 + * [1] VLF: 0 -> 0 + * [0] VBFF: 0 -> 0 + */ + write_register(0x1D, 0x00); + + /* + * Control Register0 register: + * [7] TEST: 0 -> 0 + * [6] STOP: 0 -> + * [5] UIE: 0 -> + * [4] TIE: 0 -> + * [3] AIE: 0 -> 0 + * [2] TSTP: 0 -> 0 + * [1] TBKON: 0 -> 0 + * [0] TBKE: 0 -> 0 + */ + write_register(0x1E, 0x00); + + /* + * Control Register1 register: + * [7-6] SMPTSEL: 0 -> 0 + * [5] CHGEN: 0 -> + * [4] INIEN: 0 -> + * [3] 0: 0 -> + * [2] RSVSEL: 0 -> 0 + * [1-0] BFVSEL: 0 -> 0 + */ + write_register(0x1F, 0x00); + + this->stop(false); // clear STOP bit + + /* + * Function register: + * [7] 100TH: 0 -> disabled + * [6:5] Periodic interrupt: 0 -> no periodic interrupt + * [4] RTCM: 0 -> real-time clock mode + * [3] STOPM: 0 -> RTC stop is controlled by STOP bit only + * [2:0] Clock output frequency: 000 (Default value) + */ + write_register(0x28, 0x00); + + // Battery switch register + write_register(0x26, 0x00); // enable battery switch feature + + return true; +} + +bool RTC_RX8130CE::setTime(struct tm *t) { + uint8_t buf[8]; + buf[0] = 0x10; + buf[1] = bin2bcd(t->tm_sec) & 0x7F; + buf[2] = bin2bcd(t->tm_min) & 0x7F; + buf[3] = bin2bcd(t->tm_hour) & 0x3F; + buf[4] = bin2bcd(t->tm_wday) & 0x07; + buf[5] = bin2bcd(t->tm_mday) & 0x3F; + buf[6] = bin2bcd(t->tm_mon + 1) & 0x1F; + buf[7] = bin2bcd((t->tm_year - 100)); + + this->stop(true); + i2c_dev->write(buf, sizeof(buf)); + this->stop(false); + + return true; +} + +void RTC_RX8130CE::adjust(DateTime dt) { + struct tm *atv; + time_t utime; + + utime = (time_t)dt.unixtime(); + atv = gmtime(&utime); + + this->setTime(atv); +} + +DateTime RTC_RX8130CE::now() { + struct tm atv; + this->getTime(&atv); + + return DateTime((uint32_t)mktime(&atv)); +} + +uint32_t RTC_RX8130CE::unixtime() { + struct tm atv; + this->getTime(&atv); + + return (uint32_t)mktime(&atv); +} + +bool RTC_RX8130CE::getTime(struct tm *t) { + uint8_t buff[7]; + + buff[0] = 0x10; + + i2c_dev->write_then_read(buff, 1, buff, 7); + + t->tm_sec = bcd2bin(buff[0] & 0x7F); + t->tm_min = bcd2bin(buff[1] & 0x7F); + t->tm_hour = bcd2bin(buff[2] & 0x3F); + t->tm_wday = bcd2bin(buff[3] & 0x07); + t->tm_mday = bcd2bin(buff[4] & 0x3F); + t->tm_mon = bcd2bin(buff[5] & 0x1F) - 1; + t->tm_year = bcd2bin(buff[6]) + 100; + + return true; +} + +bool RTC_RX8130CE::writeRAM(uint8_t address, uint8_t value) { + return this->writeRAM(address, &value, 1); +} + +size_t RTC_RX8130CE::writeRAM(uint8_t address, uint8_t *value, size_t len) { + uint8_t buf[len + 1]; + + if (address > 3) { + return 0; + } + + if ((address + len) > 3) { + len = 3 - address; + } + + buf[0] = 0x20 + address; + + for (int i = 1; i <= len + 1; i++) { + buf[i] = value[i - 1]; + } + + i2c_dev->write(buf, len + 1); + + return len; +} + +bool RTC_RX8130CE::readRAM(uint8_t address, uint8_t *value, size_t len) { + uint8_t real_address = 0x20 + address; + + if (address > 3) { // Oversize of 64-bytes RAM + return false; + } + + if ((address + len) > 3) { // Data size over RAM size + len = 3 - address; + } + + i2c_dev->write_then_read(&real_address, 1, value, len); + return true; +} + +uint8_t RTC_RX8130CE::readRAM(uint8_t address) { + uint8_t value = 0xFF; + this->readRAM(address, &value, 1); + return value; +} diff --git a/src/helpers/RTC_RX8130CE.h b/src/helpers/RTC_RX8130CE.h new file mode 100644 index 0000000000..1cf148a9fe --- /dev/null +++ b/src/helpers/RTC_RX8130CE.h @@ -0,0 +1,33 @@ +#ifndef __RTC_RX8130CE_H__ +#define __RTC_RX8130CE_H__ + +#include +#include +#include +#include "RTClib.h" + +class RTC_RX8130CE : RTC_I2C { + private: + const uint8_t _addr = 0x32; + + bool stop(bool stop); + + protected: + + public: + bool begin(TwoWire *wire); + bool setTime(struct tm *t); + bool getTime(struct tm *t); + void adjust(DateTime t); + + DateTime now(); + uint32_t unixtime(); + + bool writeRAM(uint8_t address, uint8_t value); + size_t writeRAM(uint8_t address, uint8_t *value, size_t len); + bool readRAM(uint8_t address, uint8_t *value, size_t len); + uint8_t readRAM(uint8_t address); + +}; + +#endif diff --git a/src/helpers/RegionMap.cpp b/src/helpers/RegionMap.cpp index 2cc47e1d5a..7b8399e260 100644 --- a/src/helpers/RegionMap.cpp +++ b/src/helpers/RegionMap.cpp @@ -42,7 +42,8 @@ class BufStream : public Stream { RegionMap::RegionMap(TransportKeyStore& store) : _store(&store) { - next_id = 1; num_regions = 0; home_id = 0; + next_id = 1; num_regions = 0; + default_id = home_id = 0; wildcard.id = wildcard.parent = 0; wildcard.flags = 0; // default behaviour, allow flood and direct strcpy(wildcard.name, "*"); @@ -79,9 +80,11 @@ bool RegionMap::load(FILESYSTEM* _fs, const char* path) { if (file) { uint8_t pad[128]; - num_regions = 0; next_id = 1; home_id = 0; + num_regions = 0; next_id = 1; + default_id = home_id = 0; - bool success = file.read(pad, 5) == 5; // reserved header + bool success = file.read(pad, 3) == 3; // reserved header + success = success && file.read((uint8_t *) &default_id, sizeof(default_id)) == sizeof(default_id); success = success && file.read((uint8_t *) &home_id, sizeof(home_id)) == sizeof(home_id); success = success && file.read((uint8_t *) &wildcard.flags, sizeof(wildcard.flags)) == sizeof(wildcard.flags); success = success && file.read((uint8_t *) &next_id, sizeof(next_id)) == sizeof(next_id); @@ -117,7 +120,8 @@ bool RegionMap::save(FILESYSTEM* _fs, const char* path) { uint8_t pad[128]; memset(pad, 0, sizeof(pad)); - bool success = file.write(pad, 5) == 5; // reserved header + bool success = file.write(pad, 3) == 3; // reserved header + success = success && file.write((uint8_t *) &default_id, sizeof(default_id)) == sizeof(default_id); success = success && file.write((uint8_t *) &home_id, sizeof(home_id)) == sizeof(home_id); success = success && file.write((uint8_t *) &wildcard.flags, sizeof(wildcard.flags)) == sizeof(wildcard.flags); success = success && file.write((uint8_t *) &next_id, sizeof(next_id)) == sizeof(next_id); @@ -164,24 +168,29 @@ RegionEntry* RegionMap::putRegion(const char* name, uint16_t parent_id, uint16_t return region; } +int RegionMap::getTransportKeysFor(const RegionEntry& src, TransportKey dest[], int max_num) { + int num; + if (src.name[0] == '$') { // private region + num = _store->loadKeysFor(src.id, dest, max_num); + } else if (src.name[0] == '#') { // auto hashtag region + _store->getAutoKeyFor(src.id, src.name, dest[0]); + num = 1; + } else { // new: implicit auto hashtag region + char tmp[sizeof(src.name)+1]; + tmp[0] = '#'; + strcpy(&tmp[1], src.name); + _store->getAutoKeyFor(src.id, tmp, dest[0]); + num = 1; + } + return num; +} + RegionEntry* RegionMap::findMatch(mesh::Packet* packet, uint8_t mask) { for (int i = 0; i < num_regions; i++) { auto region = ®ions[i]; if ((region->flags & mask) == 0) { // does region allow this? (per 'mask' param) TransportKey keys[4]; - int num; - if (region->name[0] == '$') { // private region - num = _store->loadKeysFor(region->id, keys, 4); - } else if (region->name[0] == '#') { // auto hashtag region - _store->getAutoKeyFor(region->id, region->name, keys[0]); - num = 1; - } else { // new: implicit auto hashtag region - char tmp[sizeof(region->name)]; - tmp[0] = '#'; - strcpy(&tmp[1], region->name); - _store->getAutoKeyFor(region->id, tmp, keys[0]); - num = 1; - } + int num = getTransportKeysFor(*region, keys, 4); for (int j = 0; j < num; j++) { uint16_t code = keys[j].calcTransportCode(packet); if (packet->transport_codes[0] == code) { // a match!! @@ -237,6 +246,14 @@ void RegionMap::setHomeRegion(const RegionEntry* home) { home_id = home ? home->id : 0; } +RegionEntry* RegionMap::getDefaultRegion() { + return default_id == 0 ? NULL : findById(default_id); +} + +void RegionMap::setDefaultRegion(const RegionEntry* def) { + default_id = def ? def->id : 0; +} + bool RegionMap::removeRegion(const RegionEntry& region) { if (region.id == 0) return false; // failed (cannot remove the wildcard Region) diff --git a/src/helpers/RegionMap.h b/src/helpers/RegionMap.h index 3ebff1ba5e..5eb1442983 100644 --- a/src/helpers/RegionMap.h +++ b/src/helpers/RegionMap.h @@ -16,11 +16,13 @@ struct RegionEntry { uint16_t parent; uint8_t flags; char name[31]; + + bool isWildcard() const { return id == 0; } }; class RegionMap { TransportKeyStore* _store; - uint16_t next_id, home_id; + uint16_t next_id, home_id, default_id; uint16_t num_regions; RegionEntry regions[MAX_REGION_ENTRIES]; RegionEntry wildcard; @@ -43,6 +45,8 @@ class RegionMap { RegionEntry* findById(uint16_t id); RegionEntry* getHomeRegion(); // NOTE: can be NULL void setHomeRegion(const RegionEntry* home); + RegionEntry* getDefaultRegion(); // NOTE: can be NULL + void setDefaultRegion(const RegionEntry* def); bool removeRegion(const RegionEntry& region); bool clear(); void resetFrom(const RegionMap& src) { num_regions = 0; next_id = src.next_id; } @@ -50,6 +54,7 @@ class RegionMap { const RegionEntry* getByIdx(int i) const { return ®ions[i]; } const RegionEntry* getRoot() const { return &wildcard; } int exportNamesTo(char *dest, int max_len, uint8_t mask, bool invert = false); + int getTransportKeysFor(const RegionEntry& src, TransportKey dest[], int max_num); void exportTo(Stream& out) const; size_t exportTo(char *dest, size_t max_len) const; diff --git a/src/helpers/esp32/ESPNOWRadio.h b/src/helpers/esp32/ESPNOWRadio.h index c696da3a87..43772e5e24 100644 --- a/src/helpers/esp32/ESPNOWRadio.h +++ b/src/helpers/esp32/ESPNOWRadio.h @@ -4,10 +4,10 @@ class ESPNOWRadio : public mesh::Radio { protected: - uint32_t n_recv, n_sent; + uint32_t n_recv, n_sent, n_recv_errors; public: - ESPNOWRadio() { n_recv = n_sent = 0; } + ESPNOWRadio() { n_recv = n_sent = n_recv_errors = 0; } void init(); int recvRaw(uint8_t* bytes, int sz) override; @@ -19,12 +19,21 @@ class ESPNOWRadio : public mesh::Radio { uint32_t getPacketsRecv() const { return n_recv; } uint32_t getPacketsSent() const { return n_sent; } - void resetStats() { n_recv = n_sent = 0; } + uint32_t getPacketsRecvErrors() const { return n_recv_errors; } + void resetStats() { n_recv = n_sent = n_recv_errors = 0; } virtual float getLastRSSI() const override; virtual float getLastSNR() const override; float packetScore(float snr, int packet_len) override { return 0; } + + /** + * These two functions do nothing for ESP-NOW, but are needed for the + * Radio interface. + */ + virtual void setRxBoostedGainMode(bool) { } + virtual bool getRxBoostedGainMode() const { return false; } + uint32_t intID(); void setTxPower(uint8_t dbm); }; diff --git a/src/helpers/esp32/SerialBLEInterface.cpp b/src/helpers/esp32/SerialBLEInterface.cpp index dcfa0e1e34..d14a386418 100644 --- a/src/helpers/esp32/SerialBLEInterface.cpp +++ b/src/helpers/esp32/SerialBLEInterface.cpp @@ -1,5 +1,5 @@ #include "SerialBLEInterface.h" -#include "esp_mac.h" +#include // See the following for generating UUIDs: // https://www.uuidgenerator.net/ diff --git a/src/helpers/nrf52/SerialBLEInterface.cpp b/src/helpers/nrf52/SerialBLEInterface.cpp index 5a3017af45..75a4e3b064 100644 --- a/src/helpers/nrf52/SerialBLEInterface.cpp +++ b/src/helpers/nrf52/SerialBLEInterface.cpp @@ -181,6 +181,13 @@ void SerialBLEInterface::begin(const char* prefix, char* name, uint32_t pin_code bleuart.begin(); bleuart.setRxCallback(onBleUartRX); + + + // Register DFU on the main BLE stack so paired clients can discover it + // without switching the device into a separate OTA-only BLE mode first. + bledfu.setPermission(SECMODE_ENC_WITH_MITM, SECMODE_ENC_WITH_MITM); + bledfu.begin(); + Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE); Bluefruit.Advertising.addTxPower(); Bluefruit.Advertising.addService(bleuart); diff --git a/src/helpers/nrf52/SerialBLEInterface.h b/src/helpers/nrf52/SerialBLEInterface.h index e2fc6cb95f..de1030548f 100644 --- a/src/helpers/nrf52/SerialBLEInterface.h +++ b/src/helpers/nrf52/SerialBLEInterface.h @@ -8,6 +8,7 @@ #endif class SerialBLEInterface : public BaseSerialInterface { + BLEDfu bledfu; BLEUart bleuart; bool _isEnabled; bool _isDeviceConnected; diff --git a/src/helpers/sensors/EnvironmentSensorManager.cpp b/src/helpers/sensors/EnvironmentSensorManager.cpp index 07807011db..19472406d8 100644 --- a/src/helpers/sensors/EnvironmentSensorManager.cpp +++ b/src/helpers/sensors/EnvironmentSensorManager.cpp @@ -12,7 +12,7 @@ #endif #define TELEM_BME680_SEALEVELPRESSURE_HPA (1013.25) #include -static Adafruit_BME680 BME680; +static Adafruit_BME680 BME680(TELEM_WIRE); #endif #ifdef ENV_INCLUDE_BMP085 @@ -62,9 +62,15 @@ LPS22HBClass LPS22HB(*TELEM_WIRE); #endif #if ENV_INCLUDE_INA3221 +#ifndef TELEM_INA3221_ADDRESS #define TELEM_INA3221_ADDRESS 0x42 // INA3221 3 channel current sensor I2C address +#endif +#ifndef TELEM_INA3221_SHUNT_VALUE #define TELEM_INA3221_SHUNT_VALUE 0.100 // most variants will have a 0.1 ohm shunts +#endif +#ifndef TELEM_INA3221_NUM_CHANNELS #define TELEM_INA3221_NUM_CHANNELS 3 +#endif #include static Adafruit_INA3221 INA3221; #endif @@ -101,6 +107,12 @@ static Adafruit_MLX90614 MLX90614; static Adafruit_VL53L0X VL53L0X; #endif +#if ENV_INCLUDE_RAK12035 +#define TELEM_RAK12035_ADDRESS 0x20 // RAK12035 Soil Moisture sensor I2C address +#include "RAK12035_SoilMoisture.h" +static RAK12035_SoilMoisture RAK12035; +#endif + #if ENV_INCLUDE_GPS && defined(RAK_BOARD) && !defined(RAK_WISMESH_TAG) #define RAK_WISBLOCK_GPS #endif @@ -180,7 +192,7 @@ bool EnvironmentSensorManager::begin() { #endif #if ENV_INCLUDE_BME680 - if (BME680.begin(TELEM_BME680_ADDRESS, TELEM_WIRE)) { + if (BME680.begin(TELEM_BME680_ADDRESS)) { MESH_DEBUG_PRINTLN("Found BME680 at address: %02X", TELEM_BME680_ADDRESS); BME680_initialized = true; } else { @@ -331,6 +343,17 @@ bool EnvironmentSensorManager::begin() { } #endif + #if ENV_INCLUDE_RAK12035 + RAK12035.setup(*TELEM_WIRE); + if (RAK12035.begin(TELEM_RAK12035_ADDRESS)) { + MESH_DEBUG_PRINTLN("Found sensor RAK12035 at address: %02X", TELEM_RAK12035_ADDRESS); + RAK12035_initialized = true; + } else { + RAK12035_initialized = false; + MESH_DEBUG_PRINTLN("RAK12035 was not found at I2C address %02X", TELEM_RAK12035_ADDRESS); + } + #endif + return true; } @@ -483,8 +506,36 @@ bool EnvironmentSensorManager::querySensors(uint8_t requester_permissions, Cayen } #endif - } + #if ENV_INCLUDE_RAK12035 + if (RAK12035_initialized) { + // RAK12035 Telemetry is Channel 2 + telemetry.addTemperature(2, RAK12035.get_sensor_temperature()); + telemetry.addPercentage(2, RAK12035.get_sensor_moisture()); + + // RAK12035 CALIBRATION Telemetry is Channel 3, if enabled + + #ifdef ENABLE_RAK12035_CALIBRATION + // Calibration Data Screen is Channel 3 + float cap = RAK12035.get_sensor_capacitance(); + float _wet = RAK12035.get_humidity_full(); + float _dry = RAK12035.get_humidity_zero(); + + telemetry.addFrequency(3, cap); + telemetry.addTemperature(3, _wet); + telemetry.addPower(3, _dry); + + if(cap > _dry){ + RAK12035.set_humidity_zero(cap); + } + + if(cap < _wet){ + RAK12035.set_humidity_full(cap); + } + #endif + } + #endif + } return true; } @@ -665,7 +716,7 @@ bool EnvironmentSensorManager::gpsIsAwake(uint8_t ioPin){ gps_detected = true; return true; } - + pinMode(ioPin, INPUT); MESH_DEBUG_PRINTLN("GPS did not init with this IO pin... try the next"); return false; diff --git a/src/helpers/sensors/EnvironmentSensorManager.h b/src/helpers/sensors/EnvironmentSensorManager.h index f176a33f5f..32413ebc03 100644 --- a/src/helpers/sensors/EnvironmentSensorManager.h +++ b/src/helpers/sensors/EnvironmentSensorManager.h @@ -22,6 +22,7 @@ class EnvironmentSensorManager : public SensorManager { bool SHT4X_initialized = false; bool BME680_initialized = false; bool BMP085_initialized = false; + bool RAK12035_initialized = false; bool gps_detected = false; bool gps_active = false; diff --git a/src/helpers/sensors/RAK12035_SoilMoisture.cpp b/src/helpers/sensors/RAK12035_SoilMoisture.cpp new file mode 100644 index 0000000000..4daeaadeaf --- /dev/null +++ b/src/helpers/sensors/RAK12035_SoilMoisture.cpp @@ -0,0 +1,554 @@ +/*----------------------------------------------------------------------* + * RAK12035_SoilMoistureSensor.cpp - Arduino library for the Sensor * + * version of I2C Soil Moisture Sensor version from Chrirp * + * (https://github.com/Miceuz/i2c-moisture-sensor). * + * * + * Ingo Fischer 11Nov2015 * + * https://github.com/Apollon77/I2CSoilMoistureSensor * + * * + * Ken Privitt 8Feb2026 * + * Adapted for MeshCore Firmware Stack * + * * + * MIT license * + * * + * This file contains a collection of routines to access the * + * RAK12035 Soil Moisture Sensor via I2C. The sensor provides * + * Soil Temperature and capacitance-based Soil Moisture Readings. * + * * + *----------------------------------------------------------------------*/ + +#include "RAK12035_SoilMoisture.h" +#include "MeshCore.h" +#include + +/*----------------------------------------------------------------------* + * Constructor. * + *----------------------------------------------------------------------*/ + // RAK12035_SoilMoisture(uint8_t addr) + // + // Accepts the I2C Address to look for the RAK12035 + // Initializes the I2C to null (will be setup later in Wire.Begin() + // + // No hardware is touched in the constructor. + // I2C communication is deferred until begin() is called. + //------------------------------------------------------------------------------ + +RAK12035_SoilMoisture::RAK12035_SoilMoisture(uint8_t addr) +{ + _addr = addr; // Save the sensor's I2C address + _i2c = nullptr; // Bus not assigned yet; must be set in begin() +} + +//------------------------------------------------------------------------------ +// setup() +//------------------------------------------------------------------------------ +// setup(TwoWire &i2c) +// +// Assigns the I2C bus that this driver instance will use. This allows the +// application to choose between Wire, Wire1, or any other TwoWire instance +// supported by the platform. +// +// No I2C communication occurs here; setup() simply stores the pointer so that +// begin() and all register‑level operations know which bus to use. +//------------------------------------------------------------------------------ +void RAK12035_SoilMoisture::setup(TwoWire &i2c) + +{ + _i2c = &i2c; // assigns the bus pointer + _i2c->begin(); // Initialize the bus to Wire or Wire1 +} + +//------------------------------------------------------------------------------ +// RAK12035 Soil Moisture begin() +//------------------------------------------------------------------------------ +// +// Performs initialization of the RAK12035 soil‑moisture sensor. This +// routine assumes that the application has already selected the I2C bus via +// setup() and that the bus has been initialized externally (Wire.begin()). +// It uses the passed in I2C Address (default 0x20) +// +// *** This code does not supprt three sensors *** +// The RAK12023 has three connectors, but each of the sensors attached must +// all have a different I2C addresses. +// This code has a function to set the I2C adress of a sensor +// and currently only supports one address 0x20 (the default). +// To support three sensors, EnvironmentSensorManager would need to be modified +// to support multiple instances of the RAK12035_SoilMoisture class, +// each with a different address. (0x20, 0x21, 0x22) +// The begin() function would need to be modified to loop through the three addresses +// +// DEBUG STATEMENTS: Can be enabled by uncommenting or adding: +// File: varients/rak4631 platformio.ini +// Section example: [env:RAK_4631_companion_radio_ble] +// Enable Debug statements: -D MESH_DEBUG=1 +// +//------------------------------------------------------------------------------ +bool RAK12035_SoilMoisture::begin(uint8_t addr) +{ +// MESH_DEBUG_PRINTLN("begin() - Start of RAK12035 initialization"); +// MESH_DEBUG_PRINTLN("begin() - RAK12035 passed in Address %02X", addr); + +// 1. Ensure setup() was called + if (_i2c == nullptr) { + MESH_DEBUG_PRINTLN("RAK12035 ERROR: I2C bus not set!"); + return false; +} + + uint16_t _dry_cal = 200; + uint16_t _wet_cal = 600; + uint8_t _version = 0; + uint8_t _addr; // The I2C address to be used (passed in parameter) + +/*------------------------------------------------------------------------------------------ + * Set Calibration values - This is done with custom a firmware version + * + * USE the Build Flag: -D ENABLE_RAK12035_CALIBRATION = 1 + * OR + * Change the value to 1 in the RAK12035_SoilMoisture.h file + * + * Calibration Procedure: + * 1) Flash the the Calibration version of the firmware. + * 2) Leave the sensor dry, power up the device. + * 3) After detecting the RAK12035 this firmware will display calibration data on Channel 3 + * + * Frequency = Current Capacitance Value + * Temperature = Current Wet calibration value + * Power = Current Dry calibration value + * + * 4) Click refresh several times. This will take a capacitance reading and if it is + * greater than the current Dry value it will store it in the sensor + * The value will bounce a little as you click refresh, but it eventually settles down (a few clicks) + * the stored value will stabalize at it's Maximum value. + * + * 5) Put the sensor in water. + * + * 6) Click refresh several times. This will take a capacitance reading and if it is + * less than the current Wet value it will store it in the sensor + * The value will bounce a little as you click refresh, but it eventually settles down (a few clicks) + * the stored value will stabalize at it's Minimum value. + * + * 7) The Sensor is now calibrated, turn off the device. + * + * 8) Reflash the device with the non-Calibration Firmware, Data will be shown on Channel 2 + * + *------------------------------------------------------------------------------------------ +*/ + +#if ENABLE_RAK12035_CALIBRATION + uint16_t _wet = 2000; // A high value the should be out of the normal Wet range + set_humidity_full(_wet); + + uint16_t _dry = 50; // A low value the should be out of the normal Dry range + set_humidity_zero(_dry); +#endif + + /*-------------------------------------------------------------------------------- + * + * Check if a sensor is present and return true if found, false if not present + * + *-------------------------------------------------------------------------------- + */ + if (query_sensor()) { + MESH_DEBUG_PRINTLN("begin() - Sensor responded with valid version"); + return true; + } + else { + MESH_DEBUG_PRINTLN("begin() - Sensor version FAIL"); + return false; + } +} + +/*--------------------------------------------------------------------------------- + * + * Below are all the routines to execute the various I2C commands supported + * by the RAK12035 sensor + * + *--------------------------------------------------------------------------------*/ + +uint16_t RAK12035_SoilMoisture::get_sensor_capacitance() //Command 01 - (r) 2 byte +{ + uint8_t buf[2] = {0}; + if (!read_rak12035(SOILMOISTURESENSOR_GET_CAPACITANCE, buf, 2)) { + MESH_DEBUG_PRINTLN("Function 1: get_capacitance() FAIL: Bad data returned = %02X %02X", buf[0], buf[1]); + return (buf[0] << 8) | buf[1]; // return raw for debugging + } + uint16_t cap = (buf[0] << 8) | buf[1]; + MESH_DEBUG_PRINTLN("Function 1: get_capacitance() SUCCESS: Capacitance = %d", cap); + return cap; +} + + +uint8_t RAK12035_SoilMoisture::get_I2C_address() //Command 02 - (r) 1 byte +{ + uint8_t addr = 0; + if (!read_rak12035(SOILMOISTURESENSOR_GET_I2C_ADDR, &addr, 1)) { + MESH_DEBUG_PRINTLN("Function 2: get_I2C_address() FAIL: Bad data returned = %02X", addr); + return addr; // return raw for debugging + } + MESH_DEBUG_PRINTLN("Function 2: get_I2C_address() SUCCESS: I2C Address = %02X", addr); + return addr; +} + + +bool RAK12035_SoilMoisture::set_sensor_addr(uint8_t addr) //Command 03 - (w) 1 byte +{ + if (!write_rak12035(SOILMOISTURESENSOR_SET_I2C_ADDR, &addr, 1)) { + MESH_DEBUG_PRINTLN("Function 3: set_I2C_address() FAIL: Could not set new address %02X", addr); + return false; + } + MESH_DEBUG_PRINTLN("Function 3: set_I2C_address() SUCCESS: New address = %02X", addr); + return true; +} + + +uint8_t RAK12035_SoilMoisture::get_sensor_version() // Command 04 - 1 byte +{ + uint8_t v = 0; + + read_rak12035(SOILMOISTURESENSOR_GET_VERSION, &v, 1); + if (!read_rak12035(SOILMOISTURESENSOR_GET_VERSION, &v, 1)) { + MESH_DEBUG_PRINTLN("Function 4: get_sensor_version() FAIL: Bad data returned = %02X", v); + return v; + } + MESH_DEBUG_PRINTLN("Function 4: get_sensor_version() SUCCESS: Version = %02X", v); + return v; +} + + +float RAK12035_SoilMoisture::get_sensor_temperature() //Command 05 - (r) 2 bytes +{ + uint8_t buf[2] = {0}; + if (!read_rak12035(SOILMOISTURESENSOR_GET_TEMPERATURE, buf, 2)) { + MESH_DEBUG_PRINTLN("Function 5: get_temperature() FAIL: Bad data returned = %02X %02X", buf[0], buf[1]); + return (buf[0] << 8) | buf[1]; // raw data returned for debugging 0XFFFF is error + } + // Sensor returns a 16-bit signed integer (°C * 10) + int16_t raw = (buf[0] << 8) | buf[1]; + float tempC = raw / 10.0f; + MESH_DEBUG_PRINTLN("Function 5: get_temperature() SUCCESS: Raw=%04X Temp=%.1f C", raw, tempC); + return tempC; +} + + +bool RAK12035_SoilMoisture::sensor_sleep() //Command 06 - (w) 1 byte +{ + uint8_t tmp = 0; + if (!write_rak12035(SOILMOISTURESENSOR_SET_SLEEP, &tmp, 1)) { + MESH_DEBUG_PRINTLN("Function 6: sensor_sleep() FAIL: Could not send sleep command"); + return false; + } + MESH_DEBUG_PRINTLN("Function 6: sensor_sleep() SUCCESS: Sensor acknowledged sleep command"); + +// Optional: turn off sensor power AFTER successful sleep command + +// This has been commented out due to a pin name conflict with the Heltec v3 +// This will need to be resolved if this funstion is to be utilized in the future +/* + digitalWrite(WB_IO2, LOW); +*/ + return true; +} + + +bool RAK12035_SoilMoisture::set_humidity_full(uint16_t full) //Command 07 - (w) 2 bytes +{ + uint8_t buf[2]; + buf[0] = (full >> 8) & 0xFF; // High byte + buf[1] = full & 0xFF; // Low byte + + if (!write_rak12035(SOILMOISTURESENSOR_SET_WET_CAL, buf, 2)) { + MESH_DEBUG_PRINTLN("Function 7: set_humidity_full() FAIL: Could not set wet calibration value" + ); + return false; + } + MESH_DEBUG_PRINTLN("Function 7: set_humidity_full() SUCCESS: New Full = %04X", full); + return true; +} + + +bool RAK12035_SoilMoisture::set_humidity_zero(uint16_t zero) //Command 08 - (w) 2 bytes +{ + uint8_t buf[2]; + buf[0] = (zero >> 8) & 0xFF; // High byte + buf[1] = zero & 0xFF; // Low byte + + if (!write_rak12035(SOILMOISTURESENSOR_SET_DRY_CAL, buf, 2)) { + MESH_DEBUG_PRINTLN("Function 8: set_humidity_zero() FAIL: Could not set dry calibration value"); + return false; + } + MESH_DEBUG_PRINTLN("Function 8: set_humidity_zero() SUCCESS: New Zero = %04X", zero); + return true; +} + + +uint8_t RAK12035_SoilMoisture::get_sensor_moisture() //Command 09 - (r) 1 byte +{ +// Load calibration values from sensor + _wet_cal = get_humidity_full(); + _dry_cal = get_humidity_zero(); + + MESH_DEBUG_PRINTLN("Function 9: get_moisture() - Read from sensor or calculate from capacitance"); + + // Read sensor version + uint8_t v = get_sensor_version(); + + // If version > 2, read moisture directly from the sensor + if (v > 2) { + MESH_DEBUG_PRINTLN("Version > 02 - Reading moisture directly from sensor"); + uint8_t moisture = get_sensor_humid(); + MESH_DEBUG_PRINTLN("get_moisture() Direct Read = %d%%", moisture); + return moisture; + } + // Otherwise calculate moisture from capacitance + MESH_DEBUG_PRINTLN("Calculating moisture from capacitance"); + + uint16_t cap = get_sensor_capacitance(); + + // Clamp capacitance between calibration points + if (_dry_cal < _wet_cal) { + if (cap <= _dry_cal) cap = _dry_cal; + if (cap >= _wet_cal) cap = _wet_cal; + + float pct = (_wet_cal - cap) * 100.0f / (_wet_cal - _dry_cal); + if (pct > 100.0f) pct = 100.0f; + + MESH_DEBUG_PRINTLN("get_moisture Case 1() Calculated = %d%%", (uint8_t)pct); + return (uint8_t)pct; + } else { + if (cap >= _dry_cal) cap = _dry_cal; + if (cap <= _wet_cal) cap = _wet_cal; + + float pct = (_dry_cal - cap) * 100.0f / (_dry_cal - _wet_cal); + if (pct > 100.0f) pct = 100.0f; + + MESH_DEBUG_PRINTLN("get_moisture Case 2() Calculated = %d%%", (uint8_t)pct); + return (uint8_t)pct; + } +} + + +uint8_t RAK12035_SoilMoisture::get_sensor_humid() //Command 09 - (r) 1 byte +{ + uint8_t moisture = 0; + + if (!read_rak12035(SOILMOISTURESENSOR_GET_MOISTURE, &moisture, 1)) { + MESH_DEBUG_PRINTLN("Function 9: get_sensor_humid() FAIL: Bad data returned = %02X", moisture); + return moisture; // raw fallback + } + MESH_DEBUG_PRINTLN("Function 9: get_sensor_humid() SUCCESS: Moisture = %d%%",moisture); + return moisture; +} + + +uint16_t RAK12035_SoilMoisture::get_humidity_full() //Command 0A - (r) 2 bytes +{ + uint8_t buf[2] = {0}; + + if (!read_rak12035(SOILMOISTURESENSOR_GET_WET_CAL, buf, 2)) { + MESH_DEBUG_PRINTLN("Function A: get_humidity_full() FAIL: Bad data returned = %02X%02X", buf[0], buf[1]); + return 0xFFFF; // error indicator + } + + uint16_t full = (buf[0] << 8) | buf[1]; + + MESH_DEBUG_PRINTLN("Function A: get_humidity_full() SUCCESS: Full = %04X = %d", full, full); + return full; +} + + +uint16_t RAK12035_SoilMoisture::get_humidity_zero() //Command 0B - 2 bytes +{ + uint8_t buf[2] = {0}; + + if (!read_rak12035(SOILMOISTURESENSOR_GET_DRY_CAL, buf, 2)) { + MESH_DEBUG_PRINTLN("Function B: get_humidity_zero() FAIL: Bad data returned = %02X%02X", buf[0], buf[1]); + return 0xFFFF; // error indicator + } + + uint16_t zero = (buf[0] << 8) | buf[1]; + + MESH_DEBUG_PRINTLN("Function B: get_humidity_zero() SUCCESS: Zero = %04X = %d", zero, zero); + return zero; +} + + +/*------------------------------------------------------------------------------------------* + * getEvent() - High-level function to read both moisture and temperature in one call. * + *------------------------------------------------------------------------------------------* + * This function reads the moisture percentage and temperature from the sensor and returns * + * them via output parameters. This may be used for the telemerty delivery in the MeshCore * + * firmware, with a single function to get all sensor data. * + * * + * The function returns true if both readings were successfully obtained, or false if any * + * error occurred during I2C communication. * + * * + * This function is currently not used * + *------------------------------------------------------------------------------------------*/ +bool RAK12035_SoilMoisture::getEvent(uint8_t *humidity, uint16_t *temp) +{ + // Read moisture (0-100%) + uint8_t moist = get_sensor_moisture(); + if (moist == 0xFF) //error indicator + return false; + MESH_DEBUG_PRINTLN("getEvent() - Humidity = %d", moist); + *humidity = moist; + + //Read temperature (degrees C) + uint16_t t = get_sensor_temperature(); + if (t == 0XFFFF) // error indicator + return false; + + *temp = t; + MESH_DEBUG_PRINTLN("getEvent() - Temperature = %d", t); + return true; +} + +/*------------------------------------------------------------------------------------------* + * Sensor Power Management and Reset Routines + * + * These routines manage the power and reset state of the sensor. The sensor_on() routine is + * designed to power on the sensor and wait for it to become responsive, while the reset() + * routine toggles the reset pin and waits for the sensor to respond with a valid version. + * + * They are for a future sensor power management function. + *------------------------------------------------------------------------------------------*/ + +bool RAK12035_SoilMoisture::sensor_on() +{ + uint8_t data; + // This has been commented out due to a pin name conflict with the Heltec v3 + // This will need to be resolved if this funstion is to be utilized in the future + +/* + pinMode(WB_IO2, OUTPUT); + digitalWrite(WB_IO2, HIGH); //Turn on Sensor Power + + pinMode(WB_IO4, OUTPUT); //Set IO4 Pin to Output (connected to *reset on sensor) + digitalWrite(WB_IO4, LOW); //*reset - Reset the Sensor + delay(1); //Wait for the minimum *reset, 1mS is longer than required minimum + digitalWrite(WB_IO4, HIGH); //Deassert Reset + + delay(10); // Wait for the sensor code to complete initialization +*/ + uint8_t v = 0; + time_t timeout = millis(); + while ((!query_sensor())) //Wait for sensor to respond to I2C commands, + { //indicating it is ready + if ((millis() - timeout) > 50){ //0.5 second timeout for sensor to respond + MESH_DEBUG_PRINTLN("reset() - Timeout, no response from I2C commands"); + return false; + } + else { + delay(10); //delay 10mS + } + } +} + +bool RAK12035_SoilMoisture::reset() +{ +// This function is for a future Sensor Power Management function. +// When power is reapplied this will reset the sensor and wait for it to respond +// with a valid version. +// +// The Atmel 8495 Microcoltroller: Reset input. A low level on this pin for longer than +// the minimum pulse length will generate a reset, even if the clock is not +// running and provided the reset pin has not been disabled. The minimum pulse length is +// given in Table 25-5 on page 240. 2000ns = .002mS +// Shorter pulses are not guaranteed to generate a reset. +// +// Power is never removed so the Sensor reset was removed and is not needed, +// But might be needed if power is ever switched off. Here is tested code. + +// This has been commented out due to a pin name conflict with the Heltec v3 +// This will need to be resolved if this funstion is to be utilized in the future + +/* + pinMode(WB_IO4, OUTPUT); //Set IO4 Pin to Output (connected to *reset on sensor) + MESH_DEBUG_PRINTLN("Assert *reset (Low) for 1 mS"); + digitalWrite(WB_IO4, LOW); //Reset the Sensor + delay(1); //Wait for the minimum *reset, 1mS is longer than required minimum + MESH_DEBUG_PRINTLN("reset() - De-assert *reset (High)"); + digitalWrite(WB_IO4, HIGH); // Deassert Reset +*/ + + MESH_DEBUG_PRINTLN("reset() - Begin poling in 100mS intervals for a non-zero version"); + uint32_t start_time = millis(); + MESH_DEBUG_PRINTLN("reset() - Timeout, Start Time: %d milliseconds", start_time); + + const uint32_t timeout_ms = 500; // Wait for 0.5 seconds + uint32_t start = millis(); + + while (true) { + if (query_sensor()) { + MESH_DEBUG_PRINTLN("reset() - First Pass, Sensor responded with valid version"); + uint32_t stop_time = millis(); + MESH_DEBUG_PRINTLN("reset() - Timeout, Stop Time: %d mS", stop_time); + MESH_DEBUG_PRINTLN("reset() - Timeout, Duration: %d mS", (stop_time - start_time)); + + return true; + } + if (millis() - start > timeout_ms) { + MESH_DEBUG_PRINTLN("reset() - Timeout waiting for valid sensor version"); + uint32_t stop_time = millis(); + MESH_DEBUG_PRINTLN("reset() - Timeout, Stop Time: %d mS", stop_time); + MESH_DEBUG_PRINTLN("reset() - Timeout, Duration: %d mS", (stop_time - start_time)); + return false; + } + delay(100); + } +} + + bool RAK12035_SoilMoisture::query_sensor() +{ + uint8_t v = 0; + v = get_sensor_version(); + + // Treat 0x00 and 0xFF as invalid / bootloader / garbage + if (v == 0x00 || v == 0xFF) { + MESH_DEBUG_PRINTLN("query_sensor() FAIL: Version value invalid: %02X", v); + return false; + } + MESH_DEBUG_PRINTLN("query_sensor() SUCCESS: Sensor Present, Version = %02X", v); + return true; +} + + +/*------------------------------------------------------------------------------------------* + * Below are the low-level I2C read and write functions. These handle the actual + * communication with the sensor registers. The higher-level functions call these + * to perform specific tasks. + *------------------------------------------------------------------------------------------*/ + +bool RAK12035_SoilMoisture::read_rak12035(uint8_t cmd, uint8_t *data, uint8_t length) +{ + _i2c->beginTransmission(_addr); + _i2c->write(cmd); // <-- COMMAND, not register index + if (_i2c->endTransmission() != 0) + return false; + + delay(20); + + int received = _i2c->requestFrom(_addr, length); + if (received != length) + return false; + + for (int i = 0; i < length; i++) + data[i] = _i2c->read(); + + return true; +} + +bool RAK12035_SoilMoisture::write_rak12035(uint8_t cmd, uint8_t *data, uint8_t length) +{ + _i2c->beginTransmission(_addr); + _i2c->write(cmd); // <-- COMMAND, not register index + + for (uint8_t i = 0; i < length; i++) + _i2c->write(data[i]); + + if (_i2c->endTransmission() != 0) + return false; + + delay(20); + return true; +} diff --git a/src/helpers/sensors/RAK12035_SoilMoisture.h b/src/helpers/sensors/RAK12035_SoilMoisture.h new file mode 100644 index 0000000000..f5dc1ce599 --- /dev/null +++ b/src/helpers/sensors/RAK12035_SoilMoisture.h @@ -0,0 +1,88 @@ +/** + * @file RAK12035_SoilMoisture.h + * @author Bernd Giesecke (bernd.giesecke@rakwireless.com) + * @brief Header file for Class RAK12035 + * @version 0.1 + * @date 2021-11-20 + * + * Updates for MeshCore integration + * Ken Privitt + * 2/26/2026 + * + * @copyright Copyright (c) 2021 + * + */ +#ifndef RAK12035_SOILMOISTURE_H +#define RAK12035_SOILMOISTURE_H +#endif + +#ifndef ENABLE_RAK12025_CALIBRATION +#define ENABLE_RAK12025_CALIBRATION = 0 // Used to generate Calibration Version of Firmware + +#include +#include + +#define RAK12035_I2C_ADDR_DEFAULT 0x20 +#define RAK12035_0_ADDR 0x20 +#define RAK12035_1_ADDR 0x21 +#define RAK12035_2_ADDR 0x22 + +// Command codes used by the RAK12035 firmware +#define SOILMOISTURESENSOR_GET_CAPACITANCE 0x01 // (r) 2 bytes +#define SOILMOISTURESENSOR_GET_I2C_ADDR 0x02 // (r) 1 bytes +#define SOILMOISTURESENSOR_SET_I2C_ADDR 0x03 // (w) 1 bytes +#define SOILMOISTURESENSOR_GET_VERSION 0x04 // (r) 1 bytes +#define SOILMOISTURESENSOR_GET_TEMPERATURE 0x05 // (r) 2 bytes +#define SOILMOISTURESENSOR_SET_SLEEP 0x06 // (w) 1 bytes +#define SOILMOISTURESENSOR_SET_WET_CAL 0x07 // (w) 2 bytes +#define SOILMOISTURESENSOR_SET_DRY_CAL 0x08 // (w) 2 bytes +#define SOILMOISTURESENSOR_GET_MOISTURE 0x09 // (r) 1 bytes +#define SOILMOISTURESENSOR_GET_WET_CAL 0x0A // (r) 2 bytes +#define SOILMOISTURESENSOR_GET_DRY_CAL 0x0B // (r) 2 bytes + +class RAK12035_SoilMoisture +{ +public: + RAK12035_SoilMoisture(uint8_t addr = RAK12035_I2C_ADDR_DEFAULT); + + void setup(TwoWire& i2c); + bool begin(uint8_t addr); + bool getEvent(uint8_t *humidity, uint16_t *temperature); + + uint16_t get_sensor_capacitance(); //Command 01 - (r) 2 byte + uint8_t get_I2C_address(); //Command 02 - (r) 1 byte + bool set_sensor_addr(uint8_t addr); //Command 03 - (w) 1 byte + uint8_t get_sensor_version(); //Command 04 - (r) 1 byte + float get_sensor_temperature(); //Command 05 - (r) 2 bytes + bool sensor_sleep(); //Command 06 - (w) 1 byte + bool set_humidity_full(uint16_t hundred_val); //Command 07 - (w) 2 bytes + bool set_humidity_zero(uint16_t zero_val); //Command 08 - (w) 2 bytes + uint8_t get_sensor_moisture(); //Command 09 - (r) 1 byte + uint8_t get_sensor_humid(); //Command 09 - (r) 1 byte + uint16_t get_humidity_full(); //Command 0A - (r) 2 bytes + uint16_t get_humidity_zero(); //Command 0B - (r) 2 bytes + + bool read_rak12035(uint8_t cmd, uint8_t *data, uint8_t length); + bool write_rak12035(uint8_t cmd, uint8_t *data, uint8_t length); + + bool query_sensor(); + bool sensor_on(); + bool reset(); + + uint16_t _dry_cal; + uint16_t _wet_cal; + +private: + bool read_reg(uint8_t reg, uint8_t *data, uint8_t len); + bool write_reg(uint8_t reg, uint8_t *data, uint8_t len); + + TwoWire *_i2c = &Wire; + uint8_t _addr; + + uint16_t default_dry_cal = 2000; + uint16_t default_wet_cal = 50; + uint8_t _capacitance = 0; + uint16_t _temperature = 0; + uint8_t _moisture = 0; +}; +#endif diff --git a/src/helpers/ui/DisplayDriver.h b/src/helpers/ui/DisplayDriver.h index ec63c19123..dd65f39ec7 100644 --- a/src/helpers/ui/DisplayDriver.h +++ b/src/helpers/ui/DisplayDriver.h @@ -3,6 +3,38 @@ #include #include +struct MarqueeScroller { + int offset = 0; + unsigned long next_time = 0; + bool paused = true; + + void reset() { + offset = 0; + next_time = 0; + paused = true; + } + + // Call once per loop iteration to advance the scroll. + // textW/displayW in pixels, now = millis(). + void update(int textW, int displayW, unsigned long now, + unsigned long speed_ms = 150, unsigned long pause_ms = 2000) { + int maxScroll = textW - displayW; + if (maxScroll <= 0) { offset = 0; return; } + if (now < next_time) return; + if (paused) { + paused = false; + next_time = now + pause_ms; + } else { + offset++; + if (offset >= maxScroll) { + offset = 0; + paused = true; + } + next_time = now + speed_ms; + } + } +}; + class DisplayDriver { int _w, _h; protected: diff --git a/src/helpers/ui/SSD1306SPIDisplay.cpp b/src/helpers/ui/SSD1306SPIDisplay.cpp new file mode 100644 index 0000000000..78a4ce5391 --- /dev/null +++ b/src/helpers/ui/SSD1306SPIDisplay.cpp @@ -0,0 +1,120 @@ +#include "SSD1306SPIDisplay.h" + +// Check if SPI is ready (set by radio_init in target.cpp) +#if defined(P_LORA_SCLK) + extern bool spi_initialized; +#else + static bool spi_initialized = true; // Assume ready if no custom SPI +#endif + +bool SSD1306SPIDisplay::begin() { + // Defer actual initialization - SPI may not be ready yet + // Real init happens in lazyInit() on first use (after radio_init) + return true; +} + +bool SSD1306SPIDisplay::lazyInit() { + if (_initialized) return true; + if (!spi_initialized) { + Serial.println("SSD1306: SPI not initialized yet"); + return false; + } + + Serial.println("SSD1306: Attempting display init..."); + #ifdef DISPLAY_ROTATION + display.setRotation(DISPLAY_ROTATION); + #endif + // SPI is now initialized by radio_init() + // Pass periphBegin=false to skip spi.begin() since radio already did it + if (!display.begin(SSD1306_SWITCHCAPVCC, 0, true, false)) { + Serial.println("SSD1306: display.begin() FAILED"); + return false; + } + Serial.println("SSD1306: display.begin() OK"); + + // Fix for 64x48 displays: Adafruit library lacks this case and defaults + // to comPins=0x02 (sequential). Displays taller than 32px need 0x12 + // (alternative COM pin config) or the output is garbled. + #if defined(DISPLAY_WIDTH) && defined(DISPLAY_HEIGHT) + #if (DISPLAY_WIDTH == 64) && (DISPLAY_HEIGHT == 48) + display.ssd1306_command(SSD1306_SETCOMPINS); + display.ssd1306_command(0x12); + #endif + #endif + + // Clear any garbage in the display buffer + display.clearDisplay(); + display.display(); + _initialized = true; + return true; +} + +void SSD1306SPIDisplay::turnOn() { + if (!lazyInit()) return; + display.ssd1306_command(SSD1306_DISPLAYON); + _isOn = true; +} + +void SSD1306SPIDisplay::turnOff() { + if (!lazyInit()) return; + display.ssd1306_command(SSD1306_DISPLAYOFF); + _isOn = false; +} + +void SSD1306SPIDisplay::clear() { + if (!lazyInit()) return; + display.clearDisplay(); + display.display(); +} + +void SSD1306SPIDisplay::startFrame(Color bkg) { + if (!lazyInit()) return; + display.clearDisplay(); // TODO: apply 'bkg' + _color = SSD1306_WHITE; + display.setTextColor(_color); + display.setFont(NULL); // Default 6x8 font + display.setTextSize(1); + display.setTextWrap(false); + display.cp437(true); +} + +void SSD1306SPIDisplay::setTextSize(int sz) { + display.setTextSize(sz); +} + +void SSD1306SPIDisplay::setColor(Color c) { + _color = (c != 0) ? SSD1306_WHITE : SSD1306_BLACK; + display.setTextColor(_color); +} + +void SSD1306SPIDisplay::setCursor(int x, int y) { + display.setCursor(x, y); +} + +void SSD1306SPIDisplay::print(const char* str) { + display.print(str); +} + +void SSD1306SPIDisplay::fillRect(int x, int y, int w, int h) { + display.fillRect(x, y, w, h, _color); +} + +void SSD1306SPIDisplay::drawRect(int x, int y, int w, int h) { + display.drawRect(x, y, w, h, _color); +} + +void SSD1306SPIDisplay::drawXbm(int x, int y, const uint8_t* bits, int w, int h) { + display.drawBitmap(x, y, bits, w, h, SSD1306_WHITE); +} + +uint16_t SSD1306SPIDisplay::getTextWidth(const char* str) { + int16_t x1, y1; + uint16_t w, h; + display.getTextBounds(str, 0, 0, &x1, &y1, &w, &h); + return w; +} + +void SSD1306SPIDisplay::endFrame() { + if (!_initialized) return; + display.display(); +} diff --git a/src/helpers/ui/SSD1306SPIDisplay.h b/src/helpers/ui/SSD1306SPIDisplay.h new file mode 100644 index 0000000000..68539a5614 --- /dev/null +++ b/src/helpers/ui/SSD1306SPIDisplay.h @@ -0,0 +1,38 @@ +#pragma once + +#include "DisplayDriver.h" +#include +#include +#define SSD1306_NO_SPLASH +#include + +class SSD1306SPIDisplay : public DisplayDriver { + Adafruit_SSD1306 display; + bool _isOn; + bool _initialized; + uint8_t _color; + + bool lazyInit(); // Deferred init for SPI bus sharing + +public: + // Accept pre-initialized SPI - do NOT call spi.begin() + SSD1306SPIDisplay(SPIClass* spi, int16_t w, int16_t h, int8_t dc, int8_t rst, int8_t cs) + : DisplayDriver(w, h), display(w, h, spi, dc, rst, cs) { _isOn = false; _initialized = false; } + + bool begin(); + + bool isOn() override { return _isOn; } + void turnOn() override; + void turnOff() override; + void clear() override; + void startFrame(Color bkg = DARK) override; + void setTextSize(int sz) override; + void setColor(Color c) override; + void setCursor(int x, int y) override; + void print(const char* str) override; + void fillRect(int x, int y, int w, int h) override; + void drawRect(int x, int y, int w, int h) override; + void drawXbm(int x, int y, const uint8_t* bits, int w, int h) override; + uint16_t getTextWidth(const char* str) override; + void endFrame() override; +}; diff --git a/variants/gat562_mesh_watch13/GAT56MeshWatch13Board.cpp b/variants/gat562_mesh_watch13/GAT56MeshWatch13Board.cpp new file mode 100644 index 0000000000..5a24b541de --- /dev/null +++ b/variants/gat562_mesh_watch13/GAT56MeshWatch13Board.cpp @@ -0,0 +1,46 @@ +#include +#include + +#include "GAT56MeshWatch13Board.h" + + +#ifdef NRF52_POWER_MANAGEMENT +// Static configuration for power management +// Values set in variant.h defines +const PowerMgtConfig power_config = { + .lpcomp_ain_channel = PWRMGT_LPCOMP_AIN, + .lpcomp_refsel = PWRMGT_LPCOMP_REFSEL, + .voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK +}; + + +void GAT56MeshWatch13Board::initiateShutdown(uint8_t reason) { + if (reason == SHUTDOWN_REASON_LOW_VOLTAGE || + reason == SHUTDOWN_REASON_BOOT_PROTECT) { + configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel); + } + enterSystemOff(reason); +} +#endif // NRF52_POWER_MANAGEMENT + + +void GAT56MeshWatch13Board::begin() { + NRF52BoardDCDC::begin(); + pinMode(PIN_VBAT_READ, INPUT); + + +#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL) + Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL); +#endif + + Wire.begin(); + + pinMode(SX126X_POWER_EN, OUTPUT); +#ifdef NRF52_POWER_MANAGEMENT + // Boot voltage protection check (may not return if voltage too low) + // We need to call this after we configure SX126X_POWER_EN as output but before we pull high + checkBootVoltage(&power_config); +#endif + digitalWrite(SX126X_POWER_EN, HIGH); + delay(10); // give sx1262 some time to power up +} \ No newline at end of file diff --git a/variants/gat562_mesh_watch13/GAT56MeshWatch13Board.h b/variants/gat562_mesh_watch13/GAT56MeshWatch13Board.h new file mode 100644 index 0000000000..da792b78b1 --- /dev/null +++ b/variants/gat562_mesh_watch13/GAT56MeshWatch13Board.h @@ -0,0 +1,44 @@ +#pragma once + +#include +#include +#include + + +class GAT56MeshWatch13Board : public NRF52BoardDCDC { +protected: +#ifdef NRF52_POWER_MANAGEMENT + void initiateShutdown(uint8_t reason) override; +#endif + +public: + GAT56MeshWatch13Board() : NRF52Board("GAT562_OTA") {} + void begin(); + + #define BATTERY_SAMPLES 8 + + uint16_t getBattMilliVolts() override { + analogReadResolution(12); + + uint32_t raw = 0; + for (int i = 0; i < BATTERY_SAMPLES; i++) { + raw += analogRead(PIN_VBAT_READ); + } + raw = raw / BATTERY_SAMPLES; + + return (ADC_MULTIPLIER * raw) / 4096; + } + + const char* getManufacturerName() const override { + return "GAT562 Mesh Watch 13"; + } + + + void powerOff() override { + uint32_t button_pin = PIN_BUTTON1; + nrf_gpio_cfg_input(button_pin, NRF_GPIO_PIN_PULLUP); + nrf_gpio_cfg_sense_set(button_pin, NRF_GPIO_PIN_SENSE_LOW); + sd_power_system_off(); + } + +}; diff --git a/variants/gat562_mesh_watch13/platformio.ini b/variants/gat562_mesh_watch13/platformio.ini new file mode 100644 index 0000000000..ef30829d5c --- /dev/null +++ b/variants/gat562_mesh_watch13/platformio.ini @@ -0,0 +1,89 @@ +[GAT562_Mesh_Watch13] +extends = nrf52_base +board = rak4631 +board_check = true +build_flags = ${nrf52_base.build_flags} + ${sensor_base.build_flags} + -UENV_INCLUDE_GPS + -I variants/gat562_mesh_watch13 + -D RAK_4631 + -D RAK_BOARD + -D NRF52_POWER_MANAGEMENT + -D PIN_BOARD_SCL=14 + -D PIN_BOARD_SDA=13 + -D PIN_OLED_RESET=-1 + -D RADIO_CLASS=CustomSX1262 + -D WRAPPER_CLASS=CustomSX1262Wrapper + -D LORA_TX_POWER=19 + -D SX126X_CURRENT_LIMIT=140 + -D SX126X_RX_BOOSTED_GAIN=1 + -D QSPIFLASH=1 +build_src_filter = ${nrf52_base.build_src_filter} + +<../variants/gat562_mesh_watch13> + + + + + + +lib_deps = + ${nrf52_base.lib_deps} + ${sensor_base.lib_deps} + adafruit/Adafruit SSD1306 @ ^2.5.13 + + +;[env:GAT562_Mesh_Watch13_repeater] +;extends = GAT562_Mesh_Watch13 +;build_flags = +; ${GAT562_Mesh_Watch13.build_flags} +; -D DISPLAY_CLASS=SSD1306Display +; -D ADVERT_NAME='"GAT562 Repeater"' +; -D ADVERT_LAT=0.0 +; -D ADVERT_LON=0.0 +; -D ADMIN_PASSWORD='"password"' +; -D MAX_NEIGHBOURS=50 +;; -D MESH_PACKET_LOGGING=1 +;; -D MESH_DEBUG=1 +;build_src_filter = ${GAT562_Mesh_Watch13.build_src_filter} +; + +; +<../examples/simple_repeater> + +;[env:GAT562_Mesh_Watch13_room_server] +;extends = GAT562_Mesh_Watch13 +;build_flags = +; ${GAT562_Mesh_Watch13.build_flags} +; -D DISPLAY_CLASS=SSD1306Display +; -D ADVERT_NAME='"GAT562 Room"' +; -D ADVERT_LAT=0.0 +; -D ADVERT_LON=0.0 +; -D ADMIN_PASSWORD='"password"' +; -D ROOM_PASSWORD='"hello"' +;; -D MESH_PACKET_LOGGING=1 +;; -D MESH_DEBUG=1 +;build_src_filter = ${GAT562_Mesh_Watch13.build_src_filter} +; + +; +<../examples/simple_room_server> + +[env:GAT562_Mesh_Watch13_companion_radio_ble] +extends = GAT562_Mesh_Watch13 +board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld +board_upload.maximum_size = 712704 +build_flags = + ${GAT562_Mesh_Watch13.build_flags} + -I examples/companion_radio/ui-new + -D DISPLAY_CLASS=SSD1306Display + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 + -D BLE_PIN_CODE=123456 + -D BLE_DEBUG_LOGGING=1 + -D OFFLINE_QUEUE_SIZE=256 +; -D PIN_VIBRATION=36 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${GAT562_Mesh_Watch13.build_src_filter} + + + + + + + +<../examples/companion_radio/*.cpp> + +<../examples/companion_radio/ui-new/*.cpp> +lib_deps = + ${GAT562_Mesh_Watch13.lib_deps} + densaugeo/base64 @ ~1.4.0 + diff --git a/variants/gat562_mesh_watch13/target.cpp b/variants/gat562_mesh_watch13/target.cpp new file mode 100644 index 0000000000..87f65dd98c --- /dev/null +++ b/variants/gat562_mesh_watch13/target.cpp @@ -0,0 +1,50 @@ +#include +#include "target.h" +#include + +GAT56MeshWatch13Board board; + +#ifndef PIN_USER_BTN + #define PIN_USER_BTN (-1) +#endif + + +#ifdef DISPLAY_CLASS + DISPLAY_CLASS display; + MomentaryButton user_btn(PIN_USER_BTN, 1000, true, false, true); +#endif + + +RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI); + +WRAPPER_CLASS radio_driver(radio, board); + +VolatileRTCClock fallback_clock; +AutoDiscoverRTCClock rtc_clock(fallback_clock); +EnvironmentSensorManager sensors; + + +bool radio_init() { + rtc_clock.begin(Wire); + return radio.std_init(&SPI); +} + +uint32_t radio_get_rng_seed() { + return radio.random(0x7FFFFFFF); +} + +void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { + radio.setFrequency(freq); + radio.setSpreadingFactor(sf); + radio.setBandwidth(bw); + radio.setCodingRate(cr); +} + +void radio_set_tx_power(int8_t dbm) { + radio.setOutputPower(dbm); +} + +mesh::LocalIdentity radio_new_identity() { + RadioNoiseListener rng(radio); + return mesh::LocalIdentity(&rng); // create new random identity +} diff --git a/variants/gat562_mesh_watch13/target.h b/variants/gat562_mesh_watch13/target.h new file mode 100644 index 0000000000..a9a71ce4c4 --- /dev/null +++ b/variants/gat562_mesh_watch13/target.h @@ -0,0 +1,31 @@ +#pragma once + +#define RADIOLIB_STATIC_ONLY 1 +#include +#include +#include +#include +#include +#include + +#ifdef DISPLAY_CLASS + #include + extern DISPLAY_CLASS display; + #include + extern MomentaryButton user_btn; +#endif + +#ifdef PIN_VIBRATION + #include +#endif + +extern GAT56MeshWatch13Board board; +extern WRAPPER_CLASS radio_driver; +extern AutoDiscoverRTCClock rtc_clock; +extern EnvironmentSensorManager sensors; + +bool radio_init(); +uint32_t radio_get_rng_seed(); +void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); +void radio_set_tx_power(int8_t dbm); +mesh::LocalIdentity radio_new_identity(); diff --git a/variants/gat562_mesh_watch13/variant.cpp b/variants/gat562_mesh_watch13/variant.cpp new file mode 100644 index 0000000000..9f9c19d8ba --- /dev/null +++ b/variants/gat562_mesh_watch13/variant.cpp @@ -0,0 +1,44 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + Copyright (c) 2016 Sandeep Mistry All right reserved. + Copyright (c) 2018, Adafruit Industries (adafruit.com) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "variant.h" +#include "wiring_constants.h" +#include "wiring_digital.h" +#include "nrf.h" + +const uint32_t g_ADigitalPinMap[] = +{ + // P0 + 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , + 8 , 9 , 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, + + // P1 + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47 +}; + + +void initVariant() +{ + +} + diff --git a/variants/gat562_mesh_watch13/variant.h b/variants/gat562_mesh_watch13/variant.h new file mode 100644 index 0000000000..f79c9970a5 --- /dev/null +++ b/variants/gat562_mesh_watch13/variant.h @@ -0,0 +1,201 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + Copyright (c) 2016 Sandeep Mistry All right reserved. + Copyright (c) 2018, Adafruit Industries (adafruit.com) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef _VARIANT_RAK4630_ +#define _VARIANT_RAK4630_ + +#define RAK4630 + +/** Master clock frequency */ +#define VARIANT_MCK (64000000ul) + +#define USE_LFXO // Board uses 32khz crystal for LF +// define USE_LFRC // Board uses RC for LF + +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#include "WVariant.h" + +#ifdef __cplusplus +extern "C" +{ +#endif // __cplusplus + + /* + * WisBlock Base GPIO definitions + */ + static const uint8_t WB_IO1 = 17; // SLOT_A SLOT_B + static const uint8_t WB_IO2 = 34; // SLOT_A SLOT_B + static const uint8_t WB_IO3 = 21; // SLOT_C + static const uint8_t WB_IO4 = 4; // SLOT_C + static const uint8_t WB_IO5 = 9; // SLOT_D + static const uint8_t WB_IO6 = 10; // SLOT_D + static const uint8_t WB_SW1 = 33; // IO_SLOT + static const uint8_t WB_A0 = 5; // IO_SLOT + static const uint8_t WB_A1 = 31; // IO_SLOT + static const uint8_t WB_I2C1_SDA = 13; // SENSOR_SLOT IO_SLOT + static const uint8_t WB_I2C1_SCL = 14; // SENSOR_SLOT IO_SLOT + static const uint8_t WB_I2C2_SDA = 24; // IO_SLOT + static const uint8_t WB_I2C2_SCL = 25; // IO_SLOT + static const uint8_t WB_SPI_CS = 26; // IO_SLOT + static const uint8_t WB_SPI_CLK = 3; // IO_SLOT + static const uint8_t WB_SPI_MISO = 29; // IO_SLOT + static const uint8_t WB_SPI_MOSI = 30; // IO_SLOT + +// Number of pins defined in PinDescription array +#define PINS_COUNT (48) +#define NUM_DIGITAL_PINS (48) +#define NUM_ANALOG_INPUTS (6) +#define NUM_ANALOG_OUTPUTS (0) + +// LEDs +#define PIN_LED (-1) +#define LED_BUILTIN PIN_LED +#define LED_CONN PIN_LED +#define LED_GREEN PIN_LED +#define LED_BLUE PIN_LED +#define LED_STATE_ON 1 // State when LED is litted + + +/* + * Buttons + */ +#define PIN_BUTTON1 (9) +#define PIN_BUTTON2 (10) +#define PIN_USER_BTN PIN_BUTTON1 +#define PIN_BACK_BTN PIN_BUTTON2 + + +// Analog pins +#define PIN_VBAT_READ (5) +#define ADC_MULTIPLIER (3 * 1.75 * 1.187 * 1000) + + +/* + * Analog pins + */ +#define PIN_A0 (5) //(3) +#define PIN_A1 (31) //(4) +#define PIN_A2 (28) +#define PIN_A3 (29) +#define PIN_A4 (30) +#define PIN_A5 (31) +#define PIN_A6 (0xff) +#define PIN_A7 (0xff) + + static const uint8_t A0 = PIN_A0; + static const uint8_t A1 = PIN_A1; + static const uint8_t A2 = PIN_A2; + static const uint8_t A3 = PIN_A3; + static const uint8_t A4 = PIN_A4; + static const uint8_t A5 = PIN_A5; + static const uint8_t A6 = PIN_A6; + static const uint8_t A7 = PIN_A7; +#define ADC_RESOLUTION 14 + +// Power management boot protection threshold (millivolts) +// Set to 0 to disable boot protection +#define PWRMGT_VOLTAGE_BOOTLOCK 3300 // Won't boot below this voltage (mV) +// LPCOMP wake configuration (voltage recovery from SYSTEMOFF) +// AIN3 = P0.05 = PIN_A0 / PIN_VBAT_READ +#define PWRMGT_LPCOMP_AIN 3 +#define PWRMGT_LPCOMP_REFSEL 4 // 5/8 VDD (~3.13-3.44V) + +// Other pins +#define PIN_AREF (2) +#define PIN_NFC1 (9) +#define PIN_NFC2 (10) + + static const uint8_t AREF = PIN_AREF; + +/* + * Serial interfaces + */ +// TXD1 RXD1 on Base Board +#define PIN_SERIAL1_RX (15) +#define PIN_SERIAL1_TX (16) + +// TXD0 RXD0 on Base Board +#define PIN_SERIAL2_RX (19) +#define PIN_SERIAL2_TX (20) + +/* + * SPI Interfaces + */ +#define SPI_INTERFACES_COUNT 1 + +#define PIN_SPI_MISO (29) +#define PIN_SPI_MOSI (30) +#define PIN_SPI_SCK (3) + + static const uint8_t SS = 26; + static const uint8_t MOSI = PIN_SPI_MOSI; + static const uint8_t MISO = PIN_SPI_MISO; + static const uint8_t SCK = PIN_SPI_SCK; + +// LoRa radio module pins for RAK4631 + +#define SX126X_POWER_EN (37) +#define P_LORA_RESET (38) +#define P_LORA_NSS (42) +#define P_LORA_SCLK (43) +#define P_LORA_MOSI (44) +#define P_LORA_MISO (45) +#define P_LORA_BUSY (46) +#define P_LORA_DIO_1 (47) + +#define SX126X_DIO2_AS_RF_SWITCH true +#define SX126X_DIO3_TCXO_VOLTAGE 1.8 + +/* + * Wire Interfaces + */ +#define WIRE_INTERFACES_COUNT 2 + +#define PIN_WIRE_SDA (13) +#define PIN_WIRE_SCL (14) + +#define PIN_WIRE1_SDA (24) +#define PIN_WIRE1_SCL (25) + +// QSPI Pins +// QSPI occupied by GPIO's +#define PIN_QSPI_SCK 3 // 19 +#define PIN_QSPI_CS 26 // 17 +#define PIN_QSPI_IO0 30 // 20 +#define PIN_QSPI_IO1 29 // 21 +#define PIN_QSPI_IO2 28 // 22 +#define PIN_QSPI_IO3 2 // 23 + +// On-board QSPI Flash +#define EXTERNAL_FLASH_DEVICES W25Q16JV_IQ +#define EXTERNAL_FLASH_USE_QSPI + + + +#ifdef __cplusplus +} +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#endif diff --git a/variants/generic_espnow/platformio.ini b/variants/generic_espnow/platformio.ini index cdeed076a4..928d5315d1 100644 --- a/variants/generic_espnow/platformio.ini +++ b/variants/generic_espnow/platformio.ini @@ -69,7 +69,7 @@ lib_deps = extends = Generic_ESPNOW build_flags = ${Generic_ESPNOW.build_flags} - -D ADVERT_NAME='"Heltec Room"' + -D ADVERT_NAME='"Generic ESPNow Room"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' diff --git a/variants/heltec_v2/platformio.ini b/variants/heltec_v2/platformio.ini index f8cc936083..99f6f7e13c 100644 --- a/variants/heltec_v2/platformio.ini +++ b/variants/heltec_v2/platformio.ini @@ -178,7 +178,7 @@ build_flags = ${Heltec_lora32_v2.build_flags} -I examples/companion_radio/ui-new -D DISPLAY_CLASS=SSD1306Display - -D MAX_CONTACTS=160 + -D MAX_CONTACTS=100 -D MAX_GROUP_CHANNELS=8 -D WIFI_DEBUG_LOGGING=1 -D WIFI_SSID='"myssid"' diff --git a/variants/heltec_v3/HeltecV3Board.h b/variants/heltec_v3/HeltecV3Board.h index afdaf6398a..ba22a7f2b9 100644 --- a/variants/heltec_v3/HeltecV3Board.h +++ b/variants/heltec_v3/HeltecV3Board.h @@ -11,6 +11,9 @@ #ifndef PIN_ADC_CTRL // set in platformio.ini for Heltec Wireless Tracker (2) #define PIN_ADC_CTRL 37 #endif +#ifndef ADC_MULTIPLIER //default ADC multiplier + #define ADC_MULTIPLIER 5.42 +#endif #define PIN_ADC_CTRL_ACTIVE LOW #define PIN_ADC_CTRL_INACTIVE HIGH @@ -88,7 +91,7 @@ class HeltecV3Board : public ESP32Board { digitalWrite(PIN_ADC_CTRL, !adc_active_state); - return (5.42 * (3.3 / 1024.0) * raw) * 1000; + return (ADC_MULTIPLIER * (3.3 / 1024.0) * raw) * 1000; } const char* getManufacturerName() const override { diff --git a/variants/heltec_v4/platformio.ini b/variants/heltec_v4/platformio.ini index 57da5873db..6f6bf2b538 100644 --- a/variants/heltec_v4/platformio.ini +++ b/variants/heltec_v4/platformio.ini @@ -207,6 +207,7 @@ build_flags = -I examples/companion_radio/ui-new -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 + -D OFFLINE_QUEUE_SIZE=256 -D DISPLAY_CLASS=SSD1306Display -D WIFI_DEBUG_LOGGING=1 -D WIFI_SSID='"myssid"' @@ -370,6 +371,7 @@ build_flags = -I examples/companion_radio/ui-new -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 + -D OFFLINE_QUEUE_SIZE=256 -D DISPLAY_CLASS=ST7789LCDDisplay -D WIFI_DEBUG_LOGGING=1 -D WIFI_SSID='"myssid"' diff --git a/variants/heltec_wireless_paper/platformio.ini b/variants/heltec_wireless_paper/platformio.ini index ff554ab8aa..c6fe657d47 100644 --- a/variants/heltec_wireless_paper/platformio.ini +++ b/variants/heltec_wireless_paper/platformio.ini @@ -22,6 +22,7 @@ build_flags = ;-D PIN_BOARD_SCL=18 ; same GPIO as P_LORA_TX_LED -D PIN_USER_BTN=0 -D PIN_VEXT_EN=45 + -D ADC_MULTIPLIER=8.4 -D PIN_VBAT_READ=20 -D PIN_ADC_CTRL=19 -D SX126X_DIO2_AS_RF_SWITCH=true @@ -63,6 +64,25 @@ lib_deps = densaugeo/base64 @ ~1.4.0 bakercp/CRC32 @ ^2.0.0 +[env:Heltec_Wireless_Paper_companion_radio_usb] +extends = Heltec_Wireless_Paper_base +build_flags = + ${Heltec_Wireless_Paper_base.build_flags} + -I examples/companion_radio/ui-new + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 + -D DISPLAY_CLASS=E213Display + -D OFFLINE_QUEUE_SIZE=256 +build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter} + + + + + +<../examples/companion_radio/*.cpp> + +<../examples/companion_radio/ui-new/*.cpp> +lib_deps = + ${Heltec_Wireless_Paper_base.lib_deps} + densaugeo/base64 @ ~1.4.0 + bakercp/CRC32 @ ^2.0.0 + [env:Heltec_Wireless_Paper_repeater] extends = Heltec_Wireless_Paper_base build_flags = diff --git a/variants/lilygo_tbeam_1w/platformio.ini b/variants/lilygo_tbeam_1w/platformio.ini index cf17ae8bd0..7c8453077f 100644 --- a/variants/lilygo_tbeam_1w/platformio.ini +++ b/variants/lilygo_tbeam_1w/platformio.ini @@ -154,6 +154,7 @@ build_flags = -I examples/companion_radio/ui-new -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 + -D OFFLINE_QUEUE_SIZE=256 -D WIFI_DEBUG_LOGGING=1 -D WIFI_SSID='"myssid"' -D WIFI_PWD='"mypwd"' diff --git a/variants/lilygo_teth_elite/TETHEliteBoard.h b/variants/lilygo_teth_elite/TETHEliteBoard.h new file mode 100644 index 0000000000..15eb9533ef --- /dev/null +++ b/variants/lilygo_teth_elite/TETHEliteBoard.h @@ -0,0 +1,10 @@ +#pragma once + +#include + +class TETHEliteBoard : public ESP32Board { +public: + const char* getManufacturerName() const override { + return "LilyGO T-ETH Elite"; + } +}; diff --git a/variants/lilygo_teth_elite/platformio.ini b/variants/lilygo_teth_elite/platformio.ini new file mode 100644 index 0000000000..97728f8b4c --- /dev/null +++ b/variants/lilygo_teth_elite/platformio.ini @@ -0,0 +1,99 @@ +[LilyGo_TETH_Elite_sx1262] +extends = esp32_base +board = esp32s3box +board_build.partitions = default_16MB.csv +board_upload.flash_size = 16MB +build_flags = + ${esp32_base.build_flags} + -I variants/lilygo_teth_elite + -D BOARD_HAS_PSRAM + -D LILYGO_TETH_ELITE + -D LILYGO_T_ETH_ELITE_ESP32S3 + -D ARDUINO_USB_CDC_ON_BOOT=1 + -D P_LORA_DIO_1=8 + -D P_LORA_NSS=40 + -D P_LORA_RESET=46 + -D P_LORA_BUSY=16 + -D P_LORA_SCLK=10 + -D P_LORA_MISO=9 + -D P_LORA_MOSI=11 + -D P_LORA_TX_LED=38 + -D SX126X_DIO2_AS_RF_SWITCH=true + -D SX126X_DIO3_TCXO_VOLTAGE=1.8 + -D SX126X_CURRENT_LIMIT=140 + -D USE_SX1262 + -D RADIO_CLASS=CustomSX1262 + -D WRAPPER_CLASS=CustomSX1262Wrapper + -D LORA_TX_POWER=8 + -D SX126X_RX_BOOSTED_GAIN=1 +build_src_filter = ${esp32_base.build_src_filter} + +<../variants/lilygo_teth_elite> +lib_deps = + ${esp32_base.lib_deps} + +[env:LilyGo_TETH_Elite_sx1262_repeater] +extends = LilyGo_TETH_Elite_sx1262 +build_flags = + ${LilyGo_TETH_Elite_sx1262.build_flags} + -D ADVERT_NAME='"T-ETH Elite Repeater"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D MAX_NEIGHBOURS=50 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${LilyGo_TETH_Elite_sx1262.build_src_filter} + +<../examples/simple_repeater> +lib_deps = + ${LilyGo_TETH_Elite_sx1262.lib_deps} + ${esp32_ota.lib_deps} + +[env:LilyGo_TETH_Elite_sx1262_room_server] +extends = LilyGo_TETH_Elite_sx1262 +build_flags = + ${LilyGo_TETH_Elite_sx1262.build_flags} + -D ADVERT_NAME='"T-ETH Elite Room"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D ROOM_PASSWORD='"hello"' +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${LilyGo_TETH_Elite_sx1262.build_src_filter} + +<../examples/simple_room_server> +lib_deps = + ${LilyGo_TETH_Elite_sx1262.lib_deps} + ${esp32_ota.lib_deps} + +[env:LilyGo_TETH_Elite_sx1262_companion_radio_usb] +extends = LilyGo_TETH_Elite_sx1262 +build_flags = + ${LilyGo_TETH_Elite_sx1262.build_flags} + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 + -D OFFLINE_QUEUE_SIZE=256 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${LilyGo_TETH_Elite_sx1262.build_src_filter} + +<../examples/companion_radio/*.cpp> +lib_deps = + ${LilyGo_TETH_Elite_sx1262.lib_deps} + densaugeo/base64 @ ~1.4.0 + +[env:LilyGo_TETH_Elite_sx1262_companion_radio_ble] +extends = LilyGo_TETH_Elite_sx1262 +build_flags = + ${LilyGo_TETH_Elite_sx1262.build_flags} + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 + -D BLE_PIN_CODE=123456 + -D BLE_DEBUG_LOGGING=1 + -D OFFLINE_QUEUE_SIZE=256 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${LilyGo_TETH_Elite_sx1262.build_src_filter} + + + +<../examples/companion_radio/*.cpp> +lib_deps = + ${LilyGo_TETH_Elite_sx1262.lib_deps} + densaugeo/base64 @ ~1.4.0 diff --git a/variants/lilygo_teth_elite/target.cpp b/variants/lilygo_teth_elite/target.cpp new file mode 100644 index 0000000000..4dc377d620 --- /dev/null +++ b/variants/lilygo_teth_elite/target.cpp @@ -0,0 +1,43 @@ +#include +#include "target.h" + +TETHEliteBoard board; + +static SPIClass spi(HSPI); +RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi); +WRAPPER_CLASS radio_driver(radio, board); + +ESP32RTCClock fallback_clock; +AutoDiscoverRTCClock rtc_clock(fallback_clock); +SensorManager sensors; + +#ifndef LORA_CR + #define LORA_CR 5 +#endif + +bool radio_init() { + fallback_clock.begin(); + rtc_clock.begin(Wire); + + return radio.std_init(&spi); +} + +uint32_t radio_get_rng_seed() { + return radio.random(0x7FFFFFFF); +} + +void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { + radio.setFrequency(freq); + radio.setSpreadingFactor(sf); + radio.setBandwidth(bw); + radio.setCodingRate(cr); +} + +void radio_set_tx_power(int8_t dbm) { + radio.setOutputPower(dbm); +} + +mesh::LocalIdentity radio_new_identity() { + RadioNoiseListener rng(radio); + return mesh::LocalIdentity(&rng); +} diff --git a/variants/lilygo_teth_elite/target.h b/variants/lilygo_teth_elite/target.h new file mode 100644 index 0000000000..a842186cf6 --- /dev/null +++ b/variants/lilygo_teth_elite/target.h @@ -0,0 +1,20 @@ +#pragma once + +#define RADIOLIB_STATIC_ONLY 1 +#include +#include +#include +#include +#include +#include "TETHEliteBoard.h" + +extern TETHEliteBoard board; +extern WRAPPER_CLASS radio_driver; +extern AutoDiscoverRTCClock rtc_clock; +extern SensorManager sensors; + +bool radio_init(); +uint32_t radio_get_rng_seed(); +void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); +void radio_set_tx_power(int8_t dbm); +mesh::LocalIdentity radio_new_identity(); diff --git a/variants/lilygo_tlora_c6/platformio.ini b/variants/lilygo_tlora_c6/platformio.ini index 89e63352c1..b06a0b7cb9 100644 --- a/variants/lilygo_tlora_c6/platformio.ini +++ b/variants/lilygo_tlora_c6/platformio.ini @@ -46,7 +46,7 @@ build_flags = ; -D MESH_DEBUG=1 lib_deps = ${tlora_c6.lib_deps} -; ${esp32_ota.lib_deps} + ${esp32_ota.lib_deps} [env:LilyGo_Tlora_C6_room_server_] extends = tlora_c6 @@ -63,7 +63,7 @@ build_flags = ; -D MESH_DEBUG=1 lib_deps = ${tlora_c6.lib_deps} -; ${esp32_ota.lib_deps} + ${esp32_ota.lib_deps} [env:LilyGo_Tlora_C6_companion_radio_ble_] extends = tlora_c6 diff --git a/variants/lilygo_tlora_v2_1/platformio.ini b/variants/lilygo_tlora_v2_1/platformio.ini index 7e1330e6cc..3641f12705 100644 --- a/variants/lilygo_tlora_v2_1/platformio.ini +++ b/variants/lilygo_tlora_v2_1/platformio.ini @@ -131,7 +131,7 @@ extends = LilyGo_TLora_V2_1_1_6 build_flags = ${LilyGo_TLora_V2_1_1_6.build_flags} -I examples/companion_radio/ui-new - -D MAX_CONTACTS=160 + -D MAX_CONTACTS=100 -D MAX_GROUP_CHANNELS=8 -D WIFI_SSID='"ssid"' -D WIFI_PWD='"password"' diff --git a/variants/m5stack_unit_c6l/UnitC6LBoard.cpp b/variants/m5stack_unit_c6l/UnitC6LBoard.cpp index 08c7666046..b363ff4ab4 100644 --- a/variants/m5stack_unit_c6l/UnitC6LBoard.cpp +++ b/variants/m5stack_unit_c6l/UnitC6LBoard.cpp @@ -4,7 +4,8 @@ UnitC6LBoard board; #if defined(P_LORA_SCLK) - static SPIClass spi(0); + SPIClass spi(0); + bool spi_initialized = false; RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi); #else RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY); @@ -16,12 +17,17 @@ ESP32RTCClock fallback_clock; AutoDiscoverRTCClock rtc_clock(fallback_clock); SensorManager sensors; +#ifdef DISPLAY_CLASS + DISPLAY_CLASS display(&spi, DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_DC, DISPLAY_RST, DISPLAY_CS); +#endif + bool radio_init() { fallback_clock.begin(); rtc_clock.begin(Wire); #if defined(P_LORA_SCLK) spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI); + spi_initialized = true; return radio.std_init(&spi); #else return radio.std_init(); @@ -45,6 +51,5 @@ void radio_set_tx_power(uint8_t dbm) { mesh::LocalIdentity radio_new_identity() { RadioNoiseListener rng(radio); - return mesh::LocalIdentity(&rng); // create new random identity + return mesh::LocalIdentity(&rng); } - diff --git a/variants/m5stack_unit_c6l/UnitC6LBoard.h b/variants/m5stack_unit_c6l/UnitC6LBoard.h index a4ea3ee6e5..88ba4649f2 100644 --- a/variants/m5stack_unit_c6l/UnitC6LBoard.h +++ b/variants/m5stack_unit_c6l/UnitC6LBoard.h @@ -1,15 +1,130 @@ #pragma once #include +#include #include +// PI4IO I/O Expander (I2C address 0x43) +// Pin mapping: +// P0 = Button (active low) +// P1 = (unused input) +// P5 = LNA_EN (LNA Enable) +// P6 = ANT_SW (RF Switch) +// P7 = NRST (LoRa Reset) +#define PI4IO_ADDR 0x43 + +// PI4IO registers +#define PI4IO_REG_CHIP_RESET 0x01 +#define PI4IO_REG_IO_DIR 0x03 +#define PI4IO_REG_OUT_SET 0x05 +#define PI4IO_REG_OUT_H_IM 0x07 +#define PI4IO_REG_IN_DEF_STA 0x09 +#define PI4IO_REG_PULL_EN 0x0B +#define PI4IO_REG_PULL_SEL 0x0D +#define PI4IO_REG_IN_STA 0x0F +#define PI4IO_REG_INT_MASK 0x11 +#define PI4IO_REG_IRQ_STA 0x13 + class UnitC6LBoard : public ESP32Board { +private: + bool i2c_write_byte(uint8_t addr, uint8_t reg, uint8_t value) { + Wire.beginTransmission(addr); + Wire.write(reg); + Wire.write(value); + return Wire.endTransmission() == 0; + } + + bool i2c_read_byte(uint8_t addr, uint8_t reg, uint8_t *value) { + Wire.beginTransmission(addr); + Wire.write(reg); + if (Wire.endTransmission() != 0) return false; + if (Wire.requestFrom(addr, (uint8_t)1) != 1) return false; + if (!Wire.available()) return false; + *value = Wire.read(); + return true; + } + + void initIOExpander() { + uint8_t in_data; + + // Reset the I/O expander + i2c_write_byte(PI4IO_ADDR, PI4IO_REG_CHIP_RESET, 0xFF); + delay(10); + + i2c_read_byte(PI4IO_ADDR, PI4IO_REG_CHIP_RESET, &in_data); + delay(10); + + // Set P5, P6, P7 as outputs (0: input, 1: output) + i2c_write_byte(PI4IO_ADDR, PI4IO_REG_IO_DIR, 0b11100000); + delay(10); + + // Disable High-Impedance for used pins + i2c_write_byte(PI4IO_ADDR, PI4IO_REG_OUT_H_IM, 0b00011100); + delay(10); + + // Pull up/down select (0: down, 1: up) + i2c_write_byte(PI4IO_ADDR, PI4IO_REG_PULL_SEL, 0b11100011); + delay(10); + + // Pull up/down enable (0: disable, 1: enable) + i2c_write_byte(PI4IO_ADDR, PI4IO_REG_PULL_EN, 0b11100011); + delay(10); + + // Default input state for P0, P1 (buttons) + i2c_write_byte(PI4IO_ADDR, PI4IO_REG_IN_DEF_STA, 0b00000011); + delay(10); + + // Enable interrupts for P0, P1 (0: enable, 1: disable) + i2c_write_byte(PI4IO_ADDR, PI4IO_REG_INT_MASK, 0b11111100); + delay(10); + + // Set P7 (Reset) high, P5 and P6 will be set after + i2c_write_byte(PI4IO_ADDR, PI4IO_REG_OUT_SET, 0b10000000); + delay(10); + + // Clear IRQ status + i2c_read_byte(PI4IO_ADDR, PI4IO_REG_IRQ_STA, &in_data); + + // Enable RF switch (P6 high) and LNA (P5 high) + i2c_read_byte(PI4IO_ADDR, PI4IO_REG_OUT_SET, &in_data); + in_data |= (1 << 6); // P6 = RF Switch = HIGH + in_data |= (1 << 5); // P5 = LNA Enable = HIGH + i2c_write_byte(PI4IO_ADDR, PI4IO_REG_OUT_SET, in_data); + } + public: void begin() { ESP32Board::begin(); + + // Initialize I/O expander for LoRa RF control + initIOExpander(); + +#ifdef PIN_BUZZER + pinMode(PIN_BUZZER, OUTPUT); + digitalWrite(PIN_BUZZER, LOW); +#endif } const char* getManufacturerName() const override { - return "Unit C6L"; + return "M5Stack Unit C6L"; + } + + // Read button state from I/O expander P0 (active low) + bool isButtonPressed() { + uint8_t in_data = 0xFF; + if (!i2c_read_byte(PI4IO_ADDR, PI4IO_REG_IN_STA, &in_data)) { + return false; + } + return !(in_data & 0x01); + } + +#ifdef PIN_BUZZER + void playTone(uint16_t frequency, uint16_t duration_ms) { + tone(PIN_BUZZER, frequency, duration_ms); + } + + void stopTone() { + noTone(PIN_BUZZER); } +#endif }; diff --git a/variants/m5stack_unit_c6l/companion/UITask.cpp b/variants/m5stack_unit_c6l/companion/UITask.cpp new file mode 100644 index 0000000000..c177b6ac4a --- /dev/null +++ b/variants/m5stack_unit_c6l/companion/UITask.cpp @@ -0,0 +1,111 @@ +#include "UITask.h" +#include +#include "../../examples/companion_radio/MyMesh.h" + +#define AUTO_OFF_MILLIS 30000 +#define BOOT_SCREEN_MILLIS 4000 +#define SCROLL_SPEED_MS 150 +#define SCROLL_PAUSE_MS 2000 + +void UITask::begin(DisplayDriver* display, SensorManager* sensors, NodePrefs* node_prefs) { + _display = display; + _node_prefs = node_prefs; + _need_refresh = true; + _msgcount = 0; + _next_refresh = 0; + _auto_off = millis() + AUTO_OFF_MILLIS; + _scroller.reset(); + + if (_display != NULL) { + _display->turnOn(); + } +} + +void UITask::newMsg(uint8_t path_len, const char* from_name, const char* text, int msgcount) { + _msgcount = msgcount; + _need_refresh = true; + if (_display != NULL && !_display->isOn()) { + _display->turnOn(); + _auto_off = millis() + AUTO_OFF_MILLIS; + } +} + +void UITask::renderScreen() { + if (_display == NULL) return; + + int w = _display->width(); + char tmp[32]; + + if (millis() < BOOT_SCREEN_MILLIS) { + _display->setTextSize(1); + _display->drawTextCentered(w / 2, 3, "MeshCore"); + _display->drawTextCentered(w / 2, 20, FIRMWARE_VERSION); + _display->drawTextCentered(w / 2, 34, "Companion"); + return; + } + + _display->setTextSize(1); + +#ifdef BLE_PIN_CODE + uint32_t pin = the_mesh.getBLEPin(); + if (_connected) { + _display->drawTextCentered(w / 2, 0, "Connected"); + } else if (pin != 0) { + sprintf(tmp, "PIN:%06d", pin); + _display->drawTextCentered(w / 2, 0, tmp); + } else { + _display->drawTextCentered(w / 2, 0, "Ready"); + } +#else + _display->drawTextCentered(w / 2, 0, "USB Ready"); +#endif + + int nameW = _display->getTextWidth(_node_prefs->node_name); + if (nameW <= w) { + _display->setCursor(0, 10); + _display->print(_node_prefs->node_name); + } else { + _display->setCursor(-_scroller.offset, 10); + _display->print(_node_prefs->node_name); + } + + sprintf(tmp, "%.3f", _node_prefs->freq); + _display->setCursor(0, 20); + _display->print(tmp); + + if (_msgcount > 0) { + sprintf(tmp, "%d unread", _msgcount); + _display->setCursor(0, 30); + _display->print(tmp); + } +} + +void UITask::loop() { + if (_display == NULL) return; + + if (board.isButtonPressed()) { + if (!_display->isOn()) { + _display->turnOn(); + _need_refresh = true; + } + _auto_off = millis() + AUTO_OFF_MILLIS; + } + + if (_display->isOn()) { + if (_node_prefs != NULL) { + _scroller.update(_display->getTextWidth(_node_prefs->node_name), + _display->width(), millis(), SCROLL_SPEED_MS, SCROLL_PAUSE_MS); + } + + if (millis() >= _next_refresh) { + _display->startFrame(); + renderScreen(); + _display->endFrame(); + _next_refresh = millis() + 200; + } + + if (millis() > _auto_off) { + _display->turnOff(); + } + } +} diff --git a/variants/m5stack_unit_c6l/companion/UITask.h b/variants/m5stack_unit_c6l/companion/UITask.h new file mode 100644 index 0000000000..2a681ed1da --- /dev/null +++ b/variants/m5stack_unit_c6l/companion/UITask.h @@ -0,0 +1,29 @@ +#pragma once + +#include +#include +#include +#include "../../examples/companion_radio/NodePrefs.h" +#include "../../examples/companion_radio/AbstractUITask.h" + +class UITask : public AbstractUITask { +public: + UITask(mesh::MainBoard* board, BaseSerialInterface* serial) + : AbstractUITask(board, serial), _display(NULL) {} + + void begin(DisplayDriver* display, SensorManager* sensors, NodePrefs* node_prefs); + void loop() override; + void notify(UIEventType t) override {} + void msgRead(int msgcount) override { _msgcount = msgcount; _need_refresh = true; } + void newMsg(uint8_t path_len, const char* from_name, const char* text, int msgcount) override; + +private: + void renderScreen(); + DisplayDriver* _display; + NodePrefs* _node_prefs; + int _msgcount; + bool _need_refresh; + uint32_t _next_refresh; + uint32_t _auto_off; + MarqueeScroller _scroller; +}; diff --git a/variants/m5stack_unit_c6l/platformio.ini b/variants/m5stack_unit_c6l/platformio.ini index 84c6562afa..c64f9945ab 100644 --- a/variants/m5stack_unit_c6l/platformio.ini +++ b/variants/m5stack_unit_c6l/platformio.ini @@ -1,12 +1,17 @@ -[M5Stack_Unit_C6L] +; M5Stack Unit C6L - ESP32-C6 with SX1262 LoRa +; https://docs.m5stack.com/en/unit/Unit_C6L +[m5stack_unit_c6l] extends = esp32c6_base board = esp32-c6-devkitm-1 +board_build.flash_mode = dio board_build.partitions = min_spiffs.csv ; get around 4mb flash limit build_flags = ${esp32c6_base.build_flags} ${sensor_base.build_flags} -I variants/m5stack_unit_c6l - -D P_LORA_TX_LED=15 + -D ARDUINO_USB_CDC_ON_BOOT=1 + -D ARDUINO_USB_MODE=1 + ; LoRa SX1262 SPI pins -D P_LORA_SCLK=20 -D P_LORA_MISO=22 -D P_LORA_MOSI=21 @@ -14,94 +19,102 @@ build_flags = -D P_LORA_DIO_1=7 -D P_LORA_BUSY=19 -D P_LORA_RESET=-1 - -D PIN_BUZZER=11 - -D PIN_BOARD_SDA=16 - -D PIN_BOARD_SCL=17 - -D SX126X_RXEN=5 + ; I2C pins (PI4IO expander + sensors) + -D PIN_BOARD_SDA=10 + -D PIN_BOARD_SCL=8 + ; SX1262 configuration -D SX126X_DIO2_AS_RF_SWITCH=true - -D SX126X_DIO3_TCXO_VOLTAGE=1.8 + -D SX126X_DIO3_TCXO_VOLTAGE=3.0 -D SX126X_CURRENT_LIMIT=140 -D SX126X_RX_BOOSTED_GAIN=1 - -D USE_SX1262 + ; Radio configuration -D RADIO_CLASS=CustomSX1262 -D WRAPPER_CLASS=CustomSX1262Wrapper -D LORA_TX_POWER=22 -D DISABLE_WIFI_OTA=1 + ; NeoPixel LED for TX indication + -D P_LORA_TX_NEOPIXEL_LED=2 + ; Buzzer + -D PIN_BUZZER=11 + ; GPS on Grove port -D GPS_RX=4 -D GPS_TX=5 -build_src_filter = ${esp32c6_base.build_src_filter} - +<../variants/m5stack_unit_c6l> - + + ; Display configuration (64x48 SSD1306 OLED via SPI, shared with LoRa) + -D DISPLAY_CLASS=SSD1306SPIDisplay + -D DISPLAY_CS=6 + -D DISPLAY_DC=18 + -D DISPLAY_RST=15 + -D DISPLAY_WIDTH=64 + -D DISPLAY_HEIGHT=48 + -D DISPLAY_ROTATION=2 lib_deps = ${esp32c6_base.lib_deps} - ${sensor_base.lib_deps} - -[env:M5Stack_Unit_C6L_repeater] -extends = M5Stack_Unit_C6L -build_src_filter = ${M5Stack_Unit_C6L.build_src_filter} - +<../examples/simple_repeater/*.cpp> -build_flags = - ${M5Stack_Unit_C6L.build_flags} - -D ADVERT_NAME='"Unit C6L Repeater"' - -D ADVERT_LAT=0.0 - -D ADVERT_LON=0.0 - -D ADMIN_PASSWORD='"password"' - -D MAX_NEIGHBOURS=50 -; -D MESH_PACKET_LOGGING=1 -; -D MESH_DEBUG=1 -lib_deps = - ${M5Stack_Unit_C6L.lib_deps} -; ${esp32_ota.lib_deps} + adafruit/Adafruit SSD1306 @ ^2.5.13 +build_src_filter = ${esp32c6_base.build_src_filter} + +<../variants/m5stack_unit_c6l> + -<../variants/m5stack_unit_c6l/companion/*.cpp> + + -[env:M5Stack_Unit_C6L_room_server] -extends = M5Stack_Unit_C6L -build_src_filter = ${M5Stack_Unit_C6L.build_src_filter} - +<../examples/simple_room_server> +[env:m5stack_unit_c6l_companion_radio_usb] +extends = m5stack_unit_c6l build_flags = - ${M5Stack_Unit_C6L.build_flags} - -D ADVERT_NAME='"Unit C6L Room"' - -D ADVERT_LAT=0.0 - -D ADVERT_LON=0.0 - -D ADMIN_PASSWORD='"password"' - -D ROOM_PASSWORD='"hello"' -; -D MESH_PACKET_LOGGING=1 -; -D MESH_DEBUG=1 -lib_deps = - ${M5Stack_Unit_C6L.lib_deps} -; ${esp32_ota.lib_deps} - -[env:M5Stack_Unit_C6L_companion_radio_ble] -extends = M5Stack_Unit_C6L -build_flags = ${M5Stack_Unit_C6L.build_flags} + ${m5stack_unit_c6l.build_flags} -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 - -D BLE_PIN_CODE=123456 - -D BLE_DEBUG_LOGGING=1 -D OFFLINE_QUEUE_SIZE=256 -; -D MESH_PACKET_LOGGING=1 -; -D MESH_DEBUG=1 -build_src_filter = ${M5Stack_Unit_C6L.build_src_filter} + -I variants/m5stack_unit_c6l/companion +build_src_filter = ${m5stack_unit_c6l.build_src_filter} + - +<../examples/companion_radio/*.cpp> + +<../variants/m5stack_unit_c6l/companion/*.cpp> lib_deps = - ${M5Stack_Unit_C6L.lib_deps} + ${m5stack_unit_c6l.lib_deps} densaugeo/base64 @ ~1.4.0 end2endzone/NonBlockingRTTTL@^1.3.0 -[env:M5Stack_Unit_C6L_companion_radio_usb] -extends = M5Stack_Unit_C6L -build_flags = ${M5Stack_Unit_C6L.build_flags} +[env:m5stack_unit_c6l_companion_radio_ble] +extends = m5stack_unit_c6l +build_flags = + ${m5stack_unit_c6l.build_flags} -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 + -D BLE_PIN_CODE=123456 -D OFFLINE_QUEUE_SIZE=256 - -D ARDUINO_USB_CDC_ON_BOOT=1 - -D ARDUINO_USB_MODE=1 -build_src_filter = ${M5Stack_Unit_C6L.build_src_filter} + -I variants/m5stack_unit_c6l/companion +build_src_filter = ${m5stack_unit_c6l.build_src_filter} + - +<../examples/companion_radio/*.cpp> + +<../variants/m5stack_unit_c6l/companion/*.cpp> lib_deps = - ${M5Stack_Unit_C6L.lib_deps} + ${m5stack_unit_c6l.lib_deps} densaugeo/base64 @ ~1.4.0 end2endzone/NonBlockingRTTTL@^1.3.0 + +[env:m5stack_unit_c6l_repeater] +extends = m5stack_unit_c6l +build_flags = + ${m5stack_unit_c6l.build_flags} + -D ADVERT_NAME='"M5Stack C6L Repeater"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D MAX_NEIGHBOURS=50 +build_src_filter = ${m5stack_unit_c6l.build_src_filter} + +<../examples/simple_repeater> +lib_deps = + ${m5stack_unit_c6l.lib_deps} + +[env:m5stack_unit_c6l_room_server] +extends = m5stack_unit_c6l +build_flags = ${m5stack_unit_c6l.build_flags} + -D ADVERT_NAME='"M5Stack C6L Room"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D ROOM_PASSWORD='"hello"' +build_src_filter = ${m5stack_unit_c6l.build_src_filter} + +<../examples/simple_room_server> +lib_deps = + ${m5stack_unit_c6l.lib_deps} diff --git a/variants/m5stack_unit_c6l/target.h b/variants/m5stack_unit_c6l/target.h index 665850dd3d..6809524fa8 100644 --- a/variants/m5stack_unit_c6l/target.h +++ b/variants/m5stack_unit_c6l/target.h @@ -9,6 +9,16 @@ #include #include +#ifdef DISPLAY_CLASS + #include + extern DISPLAY_CLASS display; +#endif + +#if defined(P_LORA_SCLK) + extern SPIClass spi; + extern bool spi_initialized; +#endif + extern UnitC6LBoard board; extern WRAPPER_CLASS radio_driver; extern AutoDiscoverRTCClock rtc_clock; @@ -18,4 +28,4 @@ bool radio_init(); uint32_t radio_get_rng_seed(); void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); void radio_set_tx_power(uint8_t dbm); -mesh::LocalIdentity radio_new_identity(); \ No newline at end of file +mesh::LocalIdentity radio_new_identity(); diff --git a/variants/minewsemi_me25ls01/MinewsemiME25LS01Board.h b/variants/minewsemi_me25ls01/MinewsemiME25LS01Board.h index 6858a1062f..4fa5cd41ea 100644 --- a/variants/minewsemi_me25ls01/MinewsemiME25LS01Board.h +++ b/variants/minewsemi_me25ls01/MinewsemiME25LS01Board.h @@ -63,7 +63,7 @@ class MinewsemiME25LS01Board : public NRF52BoardDCDC { digitalWrite(LED_PIN, LOW); #endif #ifdef BUTTON_PIN - nrf_gpio_cfg_sense_input(digitalPinToInterrupt(BUTTON_PIN), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_HIGH); + nrf_gpio_cfg_sense_input(digitalPinToInterrupt(BUTTON_PIN), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW); #endif sd_power_system_off(); } diff --git a/variants/minewsemi_me25ls01/platformio.ini b/variants/minewsemi_me25ls01/platformio.ini index fd9c3819fe..dacd8d34e5 100644 --- a/variants/minewsemi_me25ls01/platformio.ini +++ b/variants/minewsemi_me25ls01/platformio.ini @@ -21,7 +21,6 @@ build_flags = ${nrf52840_me25ls01.build_flags} -I variants/minewsemi_me25ls01 -D me25ls01 -D PIN_USER_BTN=27 - -D USER_BTN_PRESSED=HIGH -D PIN_STATUS_LED=39 -D P_LORA_TX_LED=22 -D RADIO_CLASS=CustomLR1110 diff --git a/variants/muziworks_r1_neo/R1NeoBoard.cpp b/variants/muziworks_r1_neo/R1NeoBoard.cpp new file mode 100644 index 0000000000..616d255a8c --- /dev/null +++ b/variants/muziworks_r1_neo/R1NeoBoard.cpp @@ -0,0 +1,66 @@ +#include +#include + +#include "R1NeoBoard.h" + +#ifdef NRF52_POWER_MANAGEMENT +// Static configuration for power management +// Values set in variant.h defines +const PowerMgtConfig power_config = { + .lpcomp_ain_channel = PWRMGT_LPCOMP_AIN, + .lpcomp_refsel = PWRMGT_LPCOMP_REFSEL, + .voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK +}; + +void R1NeoBoard::initiateShutdown(uint8_t reason) { + // Disable LoRa module power before shutdown + MESH_DEBUG_PRINTLN("R1Neo: shutting down"); + digitalWrite(SX126X_POWER_EN, LOW); + + if (reason == SHUTDOWN_REASON_LOW_VOLTAGE || + reason == SHUTDOWN_REASON_BOOT_PROTECT) { + configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel); + } + + enterSystemOff(reason); +} +#endif // NRF52_POWER_MANAGEMENT + +void R1NeoBoard::begin() { + // R1 Neo peculiarity: tell DCDC converter to stay powered. + // Must be done as soon as practical during boot. + + pinMode(PIN_DCDC_EN_MCU_HOLD, OUTPUT); + digitalWrite(PIN_DCDC_EN_MCU_HOLD, HIGH); + + // R1 Neo peculiarity: Tell I/O Controller device is on + // Enables passthrough of buttons and LEDs + + pinMode(PIN_SOFT_SHUTDOWN, OUTPUT); + digitalWrite(PIN_SOFT_SHUTDOWN, HIGH); + + NRF52BoardDCDC::begin(); + + // button is active high and passed through from I/O controller + pinMode(PIN_USER_BTN, INPUT); + + pinMode(PIN_BUZZER, OUTPUT); + digitalWrite(PIN_BUZZER, LOW); + + // battery pins + pinMode(PIN_BAT_CHG, INPUT); + pinMode(PIN_VBAT_READ, INPUT); + + Wire.setPins(PIN_WIRE_SDA, PIN_WIRE_SCL); + + Wire.begin(); + + pinMode(SX126X_POWER_EN, OUTPUT); +#ifdef NRF52_POWER_MANAGEMENT + // Boot voltage protection check (may not return if voltage too low) + // We need to call this after we configure SX126X_POWER_EN as output but before we pull high + checkBootVoltage(&power_config); +#endif + digitalWrite(SX126X_POWER_EN, HIGH); + delay(10); // give sx1262 some time to power up +} diff --git a/variants/muziworks_r1_neo/R1NeoBoard.h b/variants/muziworks_r1_neo/R1NeoBoard.h new file mode 100644 index 0000000000..c27ea23212 --- /dev/null +++ b/variants/muziworks_r1_neo/R1NeoBoard.h @@ -0,0 +1,56 @@ +#pragma once + +#include +#include +#include +#include "NullDisplayDriver.h" +#include "MomentaryButton.h" + +#define DISPLAY_CLASS NullDisplayDriver + +class R1NeoBoard : public NRF52BoardDCDC { +protected: +#ifdef NRF52_POWER_MANAGEMENT + void initiateShutdown(uint8_t reason) override; +#endif + +public: + R1NeoBoard() : NRF52Board("R1NEO_OTA") {} + void begin(); + +#if defined(P_LORA_TX_LED) + void onBeforeTransmit() override { + digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on + #if defined(LED_BLUE) + // turn off that annoying blue LED before transmitting + digitalWrite(LED_BLUE, LOW); + #endif + } + void onAfterTransmit() override { + digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off + #if defined(LED_BLUE) + // do it after transmitting too, just in case + digitalWrite(LED_BLUE, LOW); + #endif + } +#endif + + #define BATTERY_SAMPLES 8 + + uint16_t getBattMilliVolts() override { + MESH_DEBUG_PRINTLN("R1Neo: Sampling battery"); + analogReadResolution(12); + + uint32_t raw = 0; + for (int i = 0; i < BATTERY_SAMPLES; i++) { + raw += analogRead(PIN_VBAT_READ); + } + raw = raw / BATTERY_SAMPLES; + + return (ADC_MULTIPLIER * raw) / 4096; + } + + const char* getManufacturerName() const override { + return "muzi works R1 Neo"; + } +}; diff --git a/variants/muziworks_r1_neo/platformio.ini b/variants/muziworks_r1_neo/platformio.ini new file mode 100644 index 0000000000..39ef8728fd --- /dev/null +++ b/variants/muziworks_r1_neo/platformio.ini @@ -0,0 +1,132 @@ +[R1Neo] +extends = nrf52_base +board = rak4631 +board_check = true +build_flags = ${nrf52_base.build_flags} + ${sensor_base.build_flags} + -I variants/muziworks_r1_neo + -I src/helpers/ui + -D R1Neo + -D NRF52_POWER_MANAGEMENT + -D RADIO_CLASS=CustomSX1262 + -D WRAPPER_CLASS=CustomSX1262Wrapper + -D LORA_TX_POWER=22 + -D SX126X_CURRENT_LIMIT=140 + -D SX126X_RX_BOOSTED_GAIN=1 + -D PIN_BUZZER=3 + -D PIN_USER_BTN=26 + -D USER_BTN_PRESSED=HIGH + -D PIN_GPS_TX=25 + -D PIN_GPS_RX=24 + -D PIN_GPS_EN=33 +build_src_filter = ${nrf52_base.build_src_filter} + +<../variants/muziworks_r1_neo> + + + + + + +lib_deps = + ${nrf52_base.lib_deps} + ${sensor_base.lib_deps} + sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27 + +[env:R1Neo_repeater] +extends = R1Neo +build_flags = + ${R1Neo.build_flags} + -D ADVERT_NAME='"R1 Neo Repeater"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D MAX_NEIGHBOURS=50 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${R1Neo.build_src_filter} + +<../examples/simple_repeater> + +[env:R1Neo_room_server] +extends = R1Neo +build_flags = + ${R1Neo.build_flags} + -D ADVERT_NAME='"R1 Neo Test Room"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D ROOM_PASSWORD='"hello"' +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${R1Neo.build_src_filter} + +<../examples/simple_room_server> + +[env:R1Neo_companion_radio_usb] +extends = R1Neo +board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld +board_upload.maximum_size = 712704 +build_flags = + ${R1Neo.build_flags} + -I examples/companion_radio/ui-orig + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 +; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 +; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 +build_src_filter = ${R1Neo.build_src_filter} + + + +<../examples/companion_radio/*.cpp> + +<../examples/companion_radio/ui-orig/*.cpp> +lib_deps = + ${R1Neo.lib_deps} + densaugeo/base64 @ ~1.4.0 + end2endzone/NonBlockingRTTTL@^1.3.0 + +[env:R1Neo_companion_radio_ble] +extends = R1Neo +board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld +board_upload.maximum_size = 712704 +build_flags = + ${R1Neo.build_flags} + -I examples/companion_radio/ui-orig + -D ENV_INCLUDE_GPS=1 + -D MAX_CONTACTS=350 + -D MAX_GROUP_CHANNELS=40 + -D BLE_PIN_CODE=123456 + -D BLE_DEBUG_LOGGING=1 + -D OFFLINE_QUEUE_SIZE=256 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${R1Neo.build_src_filter} + + + + + +<../examples/companion_radio/*.cpp> + +<../examples/companion_radio/ui-orig/*.cpp> +lib_deps = + ${R1Neo.lib_deps} + ${rak4631.lib_deps} + densaugeo/base64 @ ~1.4.0 + end2endzone/NonBlockingRTTTL@^1.3.0 + +[env:R1Neo_terminal_chat] +extends = R1Neo +build_flags = + ${R1Neo.build_flags} + -D MAX_CONTACTS=100 + -D MAX_GROUP_CHANNELS=1 +; -D MESH_PACKET_LOGGING=1 +; -D MESH_DEBUG=1 +build_src_filter = ${R1Neo.build_src_filter} + +<../examples/simple_secure_chat/main.cpp> +lib_deps = + ${R1Neo.lib_deps} + densaugeo/base64 @ ~1.4.0 + +[env:R1Neo_sensor] +extends = R1Neo +build_flags = + ${R1Neo.build_flags} + -D DISPLAY_CLASS=SSD1306Display + -D ADVERT_NAME='"R1 Neo Sensor"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' +; -D MESH_PACKET_LOGGING=1 + -D MESH_DEBUG=1 +build_src_filter = ${R1Neo.build_src_filter} + +<../examples/simple_sensor> diff --git a/variants/muziworks_r1_neo/target.cpp b/variants/muziworks_r1_neo/target.cpp new file mode 100644 index 0000000000..de889d4355 --- /dev/null +++ b/variants/muziworks_r1_neo/target.cpp @@ -0,0 +1,47 @@ +#include +#include "target.h" +#include + +R1NeoBoard board; + +DISPLAY_CLASS display; + +RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI); + +WRAPPER_CLASS radio_driver(radio, board); + +VolatileRTCClock fallback_clock; +AutoDiscoverRTCClock rtc_clock(fallback_clock); + +#if ENV_INCLUDE_GPS + #include + MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock); + EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea); +#else + EnvironmentSensorManager sensors; +#endif + +bool radio_init() { + rtc_clock.begin(Wire); + return radio.std_init(&SPI); +} + +uint32_t radio_get_rng_seed() { + return radio.random(0x7FFFFFFF); +} + +void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { + radio.setFrequency(freq); + radio.setSpreadingFactor(sf); + radio.setBandwidth(bw); + radio.setCodingRate(cr); +} + +void radio_set_tx_power(int8_t dbm) { + radio.setOutputPower(dbm); +} + +mesh::LocalIdentity radio_new_identity() { + RadioNoiseListener rng(radio); + return mesh::LocalIdentity(&rng); // create new random identity +} diff --git a/variants/muziworks_r1_neo/target.h b/variants/muziworks_r1_neo/target.h new file mode 100644 index 0000000000..53d7e03bec --- /dev/null +++ b/variants/muziworks_r1_neo/target.h @@ -0,0 +1,22 @@ +#pragma once + +#define RADIOLIB_STATIC_ONLY 1 +#include +#include +#include +#include +#include +#include + +extern R1NeoBoard board; +extern WRAPPER_CLASS radio_driver; +extern AutoDiscoverRTCClock rtc_clock; +extern EnvironmentSensorManager sensors; +extern DISPLAY_CLASS display; +extern MomentaryButton user_btn; + +bool radio_init(); +uint32_t radio_get_rng_seed(); +void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); +void radio_set_tx_power(int8_t dbm); +mesh::LocalIdentity radio_new_identity(); diff --git a/variants/muziworks_r1_neo/variant.cpp b/variants/muziworks_r1_neo/variant.cpp new file mode 100644 index 0000000000..bb3d1fdd47 --- /dev/null +++ b/variants/muziworks_r1_neo/variant.cpp @@ -0,0 +1,92 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + Copyright (c) 2016 Sandeep Mistry All right reserved. + Copyright (c) 2018, Adafruit Industries (adafruit.com) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "variant.h" +#include "wiring_constants.h" +#include "wiring_digital.h" +#include "nrf.h" + +const uint32_t g_ADigitalPinMap[] = +{ + // P0 + 0, // P0.00 (NC) (XTAL) + 1, // P0.01 (NC) (XTAL) + 2, // P0.02 (30) GPS_PPS + 3, // P0.03 (29) BUZZER_DRIVE + 4, // P0.04 (41) NC + 5, // P0.05 (40) NC + 6, // P0.06 (NC) NOT_PRESENT + 7, // P0.07 (NC) (TRACECLK) + 8, // P0.08 (NC) NOT_PRESENT + 9, // P0.09 (13) NC + 10, // P0.10 (12) NC + 11, // P0.11 (NC) NOT_PRESENT + 12, // P0.12 (NC) NOT_PRESENT + 13, // P0.13 (04) DCDC_EN_MCU_HOLD + 14, // P0.14 (05) NC + 15, // P0.15 (06) NC + 16, // P0.16 (07) NC + 17, // P0.17 (08) NC + 18, // P0.18 (17) !RESET + 19, // P0.19 (09) RTC_SDA + 20, // P0.20 (10) RTC_SCL + 21, // P0.21 (11) NC + 22, // P0.22 (NC) NOT_PRESENT + 23, // P0.23 (NC) NOT_PRESENT + 24, // P0.24 (23) UART_GPS_RX + 25, // P0.25 (24) UART_GPS_TX + 26, // P0.26 (26) BTN_OK/USR_BTN_PROCESSED + 27, // P0.27 (NC) NOT_PRESENT + 28, // P0.28 (31) BLU_LED_RAK + 29, // P0.29 (32) SOFT_SHUTDOWN_SIGNAL + 30, // P0.30 (33) MCU_SIGNAL + 31, // P0.31 (39) ADC_VBAT + + // P1 + 32, // P1.00 (NC) NOT_PRESENT + 33, // P1.01 (25) GPS_EN + 34, // P1.02 (26) BAT_CHG_STATUS + 35, // P1.03 (27) NC + 36, // P1.04 (28) GRN_LED_RAK + 37, // P1.05 (SX) SX126X_POWER_EN + 38, // P1.06 (SX) P_LORA_RESET + 39, // P1.07 (NC) NOT_PRESENT + 40, // P1.08 (NC) NOT_PRESENT + 41, // P1.09 (NC) NOT_PRESENT + 42, // P1.10 (SX) P_LORA_NSS + 43, // P1.11 (SX) P_LORA_SCLK + 44, // P1.12 (SX) P_LORA_MOSI + 45, // P1.13 (SX) P_LORA_MISO + 46, // P1.14 (SX) P_LORA_BUSY + 47 // P1.15 (SX) P_LORA_DIO_1 +}; + + +void initVariant() +{ + // Red & Green LEDs - enable & turn off + pinMode(LED_GREEN, OUTPUT); + ledOff(LED_GREEN); + + pinMode(LED_BLUE, OUTPUT); + ledOff(LED_BLUE); + + pinMode(PIN_GPS_EN, OUTPUT); +} diff --git a/variants/muziworks_r1_neo/variant.h b/variants/muziworks_r1_neo/variant.h new file mode 100644 index 0000000000..92046d61af --- /dev/null +++ b/variants/muziworks_r1_neo/variant.h @@ -0,0 +1,183 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + Copyright (c) 2016 Sandeep Mistry All right reserved. + Copyright (c) 2018, Adafruit Industries (adafruit.com) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef _VARIANT_R1NEO_ +#define _VARIANT_R1NEO_ + +#define RAK4630 + +/** Master clock frequency */ +#define VARIANT_MCK (64000000ul) + +#define USE_LFXO // Board uses 32khz crystal for LF +// define USE_LFRC // Board uses RC for LF + +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#include "WVariant.h" + +#ifdef __cplusplus +extern "C" +{ +#endif // __cplusplus + +/* Number of pins defined in PinDescription array */ +#define PINS_COUNT (48) +#define NUM_DIGITAL_PINS (48) +#define NUM_ANALOG_INPUTS (8) +#define NUM_ANALOG_OUTPUTS (0) + +/* R1Neo peculiarities */ +#define PIN_DCDC_EN_MCU_HOLD (13) // P0.13 (04) DCDC_EN_MCU_HOLD +#define PIN_SOFT_SHUTDOWN (29) // P0.29 (32) SOFT_SHUTDOWN_SIGNAL +#define PIN_MCU_SIGNAL (30) // P0.30 (33) MCU_SIGNAL + +/* R1Neo LoRa Radio */ +// RAK4630/4631 pins + +#define P_LORA_DIO_1 (47) // P1.15 (SX) +#define P_LORA_NSS (42) // P1.10 (SX) +#define P_LORA_RESET RADIOLIB_NC // P1.06 (SX) -- 38 +#define P_LORA_BUSY (46) // P1.14 (SX) +#define P_LORA_SCLK (43) // P1.11 (SX) +#define P_LORA_MISO (45) // P1.13 (SX) +#define P_LORA_MOSI (44) // P1.12 (SX) +#define SX126X_POWER_EN (37) // P1.05 (SX) + +#define SX126X_DIO2_AS_RF_SWITCH true +#define SX126X_DIO3_TCXO_VOLTAGE 1.8 + +/* R1Neo peripherals */ +/* GPS */ +#define GPS_RX (24) // P0.24 (23) UART_GPS_RX +#define GPS_TX (25) // P0.25 (24) UART_GPS_TX +#define GPS_EN (33) // P1.01 (25) GPS_EN +#define GPS_PPS (2) // P0.02 (30) GPS_PPS + +#define PIN_GPS_1PPS GPS_PPS +#define GPS_BAUD_RATE 9600 + +/* RTC */ +#define RTC_SDA (19) // P0.19 (9) RTC_SDA +#define RTC_SCL (20) // P0.20 (10) RTC_SCL + +/* LEDs */ +#define LED_GREEN (36) // P1.04 (28) GRN_LED_RAK +#define LED_BLUE (28) // P0.28 (31) BLU_LED_RAK + +#define LED_BUILTIN (0xFF) + +#ifndef P_LORA_TX_LED + #define P_LORA_TX_LED LED_GREEN +#endif + +#define LED_STATE_ON 1 // State when LED is lit + +/* Buttons */ +#define PIN_USER_BTN (26) + +/* Buzzer */ +#define PIN_BUZZER (3) + +/* Analog pins */ +// Arduino makes me angry +#define PIN_A0 (0xFF) // NOT_PRESENT +#define PIN_A1 (0xFF) // NOT_PRESENT +#define PIN_A2 (4) // P0.04 (41) NC +#define PIN_A3 (5) // P0.05 (40) NC +#define PIN_A4 (0xFF) // NOT_PRESENT +#define PIN_A5 (0xFF) // NOT_PRESENT +#define PIN_A6 (0xFF) // NOT_PRESENT +#define PIN_A7 (31) // P0.31 (39) ADC_VBAT + + static const uint8_t A0 = PIN_A0; + static const uint8_t A1 = PIN_A1; + static const uint8_t A2 = PIN_A2; + static const uint8_t A3 = PIN_A3; + static const uint8_t A4 = PIN_A4; + static const uint8_t A5 = PIN_A5; + static const uint8_t A6 = PIN_A6; + static const uint8_t A7 = PIN_A7; +#define ADC_RESOLUTION 14 + +// Other pins +#define PIN_AREF (0xFF) // No analog reference + + static const uint8_t AREF = PIN_AREF; + +/* Serial interfaces */ +#define PIN_GPS_TX (GPS_TX) +#define PIN_GPS_RX (GPS_RX) +#define PIN_GPS_EN (GPS_EN) + +#define PIN_SERIAL1_TX (PIN_GPS_TX) +#define PIN_SERIAL1_RX (PIN_GPS_RX) + +/* SPI Interfaces */ +// unused pins - define anyways +#define SPI_INTERFACES_COUNT 1 +#define PIN_SPI_MOSI (9) // P0.09 (13) NC +#define PIN_SPI_MISO (10) // P0.10 (12) NC +#define PIN_SPI_SCK (21) // P0.21 (11) NC + +/* I2C Interfaces */ +#define WIRE_INTERFACES_COUNT 1 + +#define PIN_WIRE_SDA (RTC_SDA) +#define PIN_WIRE_SCL (RTC_SCL) + +/* QSPI Pins */ +// interface occupied by peripherals, define anyways +#define PIN_QSPI_SCK (3) // P0.03 (29) BUZZER +#define PIN_QSPI_CS (26) // P0.26 (34) USER_BUTTON +#define PIN_QSPI_IO0 (30) // P0.30 (33) MCU_SIGNAL +#define PIN_QSPI_IO1 (29) // P0.29 (32) SOFT_SHUTDOWN +#define PIN_QSPI_IO2 (28) // P0.28 (31) BLU_LED_RAK +#define PIN_QSPI_IO3 (2) // P0.02 (30) GPS_PPS + +/* On-board QSPI Flash */ +// No QSPI (define anyways) +#define EXTERNAL_FLASH_DEVICES IS25LP080D +#define EXTERNAL_FLASH_USE_QSPI + +/* Battery */ +#define PIN_VBAT_READ (31) // P0.31 (39) ADC_VBAT +#define PIN_BAT_CHG (34) // P1.02 (26) BAT_CHG_STATUS + +#define ADC_MULTIPLIER (3 * 1.73 * 1.187 * 1000) + +// Power management boot protection threshold (millivolts) +// Set to 0 to disable boot protection +// disabled for now until I can figure this out +#define PWRMGT_VOLTAGE_BOOTLOCK 0 // Won't boot below this voltage (mV) +// LPCOMP wake configuration (voltage recovery from SYSTEMOFF) +// AIN3 = P0.05 = PIN_A0 / PIN_VBAT_READ +#define PWRMGT_LPCOMP_AIN 5 +#define PWRMGT_LPCOMP_REFSEL 4 // 5/8 VDD (~3.13-3.44V) + +#ifdef __cplusplus +} +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#endif diff --git a/variants/rak4631/platformio.ini b/variants/rak4631/platformio.ini index 842a1ad1c4..ea7e49c355 100644 --- a/variants/rak4631/platformio.ini +++ b/variants/rak4631/platformio.ini @@ -20,6 +20,7 @@ build_flags = ${nrf52_base.build_flags} -D LORA_TX_POWER=22 -D SX126X_CURRENT_LIMIT=140 -D SX126X_RX_BOOSTED_GAIN=1 + -D ENV_INCLUDE_RAK12035=1 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631> + diff --git a/variants/t1000-e/T1000eBoard.h b/variants/t1000-e/T1000eBoard.h index 4922360779..e7653fb2f4 100644 --- a/variants/t1000-e/T1000eBoard.h +++ b/variants/t1000-e/T1000eBoard.h @@ -43,7 +43,7 @@ class T1000eBoard : public NRF52BoardDCDC { uint8_t v = digitalRead(BUTTON_PIN); if (v != btn_prev_state) { btn_prev_state = v; - return (v == LOW) ? 1 : -1; + return (v == USER_BTN_PRESSED) ? 1 : -1; } #endif return 0; diff --git a/variants/t1000-e/platformio.ini b/variants/t1000-e/platformio.ini index ac92930861..429390c486 100644 --- a/variants/t1000-e/platformio.ini +++ b/variants/t1000-e/platformio.ini @@ -22,7 +22,7 @@ build_flags = ${nrf52_base.build_flags} -D P_LORA_NSS=12 ; P0.12 -D P_LORA_DIO_1=33 ; P1.1 -D P_LORA_MISO=40 ; P1.8 - -D P_LORA_MOSI=41 ; P0.9 + -D P_LORA_MOSI=41 ; P1.9 -D P_LORA_RESET=42 ; P1.10 -D LR11X0_DIO_AS_RF_SWITCH=true -D LR11X0_DIO3_TCXO_VOLTAGE=1.6 diff --git a/variants/t1000-e/variant.cpp b/variants/t1000-e/variant.cpp index a598e3cad1..ed21fd68cf 100644 --- a/variants/t1000-e/variant.cpp +++ b/variants/t1000-e/variant.cpp @@ -55,7 +55,7 @@ const uint32_t g_ADigitalPinMap[PINS_COUNT + 1] = 42, // P1.10, LORA_RESET 43, // P1.11, GPS_EN 44, // P1.12, GPS_SLEEP_INT - 45, // P1.13 + 45, // P1.13, FLASH_ENABLE 46, // P1.14, GPS_RESETB 47, // P1.15, PIN_GPS_RESET 255, // NRFX_SPIM_PIN_NOT_USED diff --git a/variants/t1000-e/variant.h b/variants/t1000-e/variant.h index 458f12bccb..b95e1e4d86 100644 --- a/variants/t1000-e/variant.h +++ b/variants/t1000-e/variant.h @@ -97,7 +97,7 @@ #define LORA_BUSY (7) // P0.7 #define LORA_SCLK (PIN_SPI_SCK) // P0.11 #define LORA_MISO (PIN_SPI_MISO) // P1.8 -#define LORA_MOSI (PIN_SPI_MOSI) // P0.9 +#define LORA_MOSI (PIN_SPI_MOSI) // P1.9 #define LR11X0_DIO_AS_RF_SWITCH true #define LR11X0_DIO3_TCXO_VOLTAGE 1.6 @@ -133,4 +133,4 @@ // Buzzer #define BUZZER_EN (37) // P1.5 -#define BUZZER_PIN (25) // P0.25 \ No newline at end of file +#define BUZZER_PIN (25) // P0.25 diff --git a/variants/thinknode_m3/platformio.ini b/variants/thinknode_m3/platformio.ini index 8ef2ba54ad..88fd487aa6 100644 --- a/variants/thinknode_m3/platformio.ini +++ b/variants/thinknode_m3/platformio.ini @@ -10,7 +10,6 @@ build_flags = ${nrf52_base.build_flags} -I src/helpers/ui -D THINKNODE_M3 -D PIN_USER_BTN=12 - -D USER_BTN_PRESSED=LOW -D PIN_STATUS_LED=35 -D RADIO_CLASS=CustomLR1110 -D WRAPPER_CLASS=CustomLR1110Wrapper diff --git a/variants/thinknode_m5/platformio.ini b/variants/thinknode_m5/platformio.ini index 0c64bcef86..16df472a22 100644 --- a/variants/thinknode_m5/platformio.ini +++ b/variants/thinknode_m5/platformio.ini @@ -58,7 +58,7 @@ build_src_filter = ${ThinkNode_M5.build_src_filter} +<../examples/simple_repeater/*.cpp> build_flags = ${ThinkNode_M5.build_flags} - -D ADVERT_NAME='"Thinknode M2 Repeater"' + -D ADVERT_NAME='"Thinknode M5 Repeater"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' @@ -111,12 +111,12 @@ lib_deps = ${esp32_ota.lib_deps} [env:ThinkNode_M5_room_server] -extends = ThinkNonde_M5 +extends = ThinkNode_M5 build_src_filter = ${ThinkNode_M5.build_src_filter} +<../examples/simple_room_server> build_flags = ${ThinkNode_M5.build_flags} - -D ADVERT_NAME='"Thinknode M2 Room Server"' + -D ADVERT_NAME='"Thinknode M5 Room Server"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' @@ -193,8 +193,8 @@ build_flags = -D MAX_GROUP_CHANNELS=40 -D OFFLINE_QUEUE_SIZE=256 -D WIFI_DEBUG_LOGGING=1 - -D WIFI_SSID='"Livebox-633C"' - -D WIFI_PWD='"vvQUHGSxsWd7fKMYSr"' + -D WIFI_SSID='"myssid"' + -D WIFI_PWD='"mypwd"' build_src_filter = ${ThinkNode_M5.build_src_filter} + + diff --git a/variants/waveshare_rp2040_lora/platformio.ini b/variants/waveshare_rp2040_lora/platformio.ini index 1f7fb02f1b..880f238f2f 100644 --- a/variants/waveshare_rp2040_lora/platformio.ini +++ b/variants/waveshare_rp2040_lora/platformio.ini @@ -20,7 +20,8 @@ build_flags = ${rp2040_base.build_flags} -D P_LORA_MOSI=15 -D P_LORA_TX_LED=25 -D SX126X_DIO2_AS_RF_SWITCH=true - -D SX126X_DIO3_TCXO_VOLTAGE=0 + -D SX126X_RXEN=17 + -D SX126X_DIO3_TCXO_VOLTAGE=1.8 -D SX126X_RX_BOOSTED_GAIN=1 -D LORA_TX_POWER=22 ; Debug options diff --git a/variants/wio-e5-mini/platformio.ini b/variants/wio-e5-mini/platformio.ini index 8378444376..f589ea0323 100644 --- a/variants/wio-e5-mini/platformio.ini +++ b/variants/wio-e5-mini/platformio.ini @@ -9,7 +9,6 @@ build_flags = ${stm32_base.build_flags} -D RX_BOOSTED_GAIN=true -D P_LORA_TX_LED=LED_RED -D PIN_USER_BTN=USER_BTN - -D USER_BTN_PRESSED=LOW -I variants/wio-e5-mini build_src_filter = ${stm32_base.build_src_filter} +<../variants/wio-e5-mini> diff --git a/variants/xiao_c3/platformio.ini b/variants/xiao_c3/platformio.ini index 95142269df..c5254b46c9 100644 --- a/variants/xiao_c3/platformio.ini +++ b/variants/xiao_c3/platformio.ini @@ -3,9 +3,6 @@ extends = esp32_base board = seeed_xiao_esp32c3 build_flags = ${esp32_base.build_flags} - ${sensor_base.build_flags} - -UENV_INCLUDE_GPS - -UENV_INCLUDE_VL53L0X -I variants/xiao_c3 -D ESP32_CPU_FREQ=80 -D PIN_VBAT_READ=D0 @@ -29,7 +26,6 @@ build_src_filter = ${esp32_base.build_src_filter} + lib_deps = ${esp32_base.lib_deps} - ${sensor_base.lib_deps} [env:Xiao_C3_repeater] extends = Xiao_esp32_C3 @@ -37,6 +33,9 @@ build_src_filter = ${Xiao_esp32_C3.build_src_filter} +<../examples/simple_repeater/*.cpp> build_flags = ${Xiao_esp32_C3.build_flags} + ${sensor_base.build_flags} + -UENV_INCLUDE_GPS + -UENV_INCLUDE_VL53L0X -D ADVERT_NAME='"Xiao C3 Repeater"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 @@ -46,6 +45,7 @@ build_flags = ; -D MESH_DEBUG=1 lib_deps = ${Xiao_esp32_C3.lib_deps} + ${sensor_base.lib_deps} ${esp32_ota.lib_deps} bakercp/CRC32 @ ^2.0.0 @@ -55,6 +55,9 @@ build_src_filter = ${Xiao_esp32_C3.build_src_filter} +<../examples/simple_room_server/*.cpp> build_flags = ${Xiao_esp32_C3.build_flags} + ${sensor_base.build_flags} + -UENV_INCLUDE_GPS + -UENV_INCLUDE_VL53L0X -D ADVERT_NAME='"Xiao C3 Room"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 @@ -64,6 +67,7 @@ build_flags = ; -D MESH_DEBUG=1 lib_deps = ${Xiao_esp32_C3.lib_deps} + ${sensor_base.lib_deps} ${esp32_ota.lib_deps} bakercp/CRC32 @ ^2.0.0 diff --git a/variants/xiao_c6/platformio.ini b/variants/xiao_c6/platformio.ini index 5d9928c518..717be7b9a0 100644 --- a/variants/xiao_c6/platformio.ini +++ b/variants/xiao_c6/platformio.ini @@ -46,7 +46,7 @@ build_flags = ; -D MESH_DEBUG=1 lib_deps = ${Xiao_C6.lib_deps} -; ${esp32_ota.lib_deps} + ${esp32_ota.lib_deps} [env:Xiao_C6_companion_radio_ble_] extends = Xiao_C6 @@ -163,7 +163,7 @@ build_flags = ; -D MESH_DEBUG=1 lib_deps = ${WHY2025_badge.lib_deps} -; ${esp32_ota.lib_deps} + ${esp32_ota.lib_deps} [env:WHY2025_badge_companion_radio_ble_] extends = WHY2025_badge diff --git a/variants/xiao_nrf52/XiaoNrf52Board.h b/variants/xiao_nrf52/XiaoNrf52Board.h index bd0fd9b12f..2790dbad90 100644 --- a/variants/xiao_nrf52/XiaoNrf52Board.h +++ b/variants/xiao_nrf52/XiaoNrf52Board.h @@ -4,6 +4,10 @@ #include #include +#ifndef USER_BTN_PRESSED +#define USER_BTN_PRESSED LOW +#endif + #ifdef XIAO_NRF52 class XiaoNrf52Board : public NRF52BoardDCDC { @@ -35,7 +39,7 @@ class XiaoNrf52Board : public NRF52BoardDCDC { // set led on and wait for button release before poweroff digitalWrite(PIN_LED, LOW); #ifdef PIN_USER_BTN - while(digitalRead(PIN_USER_BTN) == LOW); + while(digitalRead(PIN_USER_BTN) == USER_BTN_PRESSED); #endif digitalWrite(LED_GREEN, HIGH); digitalWrite(LED_BLUE, HIGH); diff --git a/variants/xiao_nrf52/platformio.ini b/variants/xiao_nrf52/platformio.ini index b9a860aaf7..a085433688 100644 --- a/variants/xiao_nrf52/platformio.ini +++ b/variants/xiao_nrf52/platformio.ini @@ -72,11 +72,11 @@ build_flags = -I examples/companion_radio/ui-orig -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 + -D OFFLINE_QUEUE_SIZE=256 -D QSPIFLASH=1 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${Xiao_nrf52.build_src_filter} - + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-orig/*.cpp> lib_deps = @@ -117,4 +117,4 @@ build_flags = build_src_filter = ${Xiao_nrf52.build_src_filter} +<../examples/kiss_modem/*.cpp> lib_deps = - ${Xiao_nrf52.lib_deps} \ No newline at end of file + ${Xiao_nrf52.lib_deps}