main.c

/******************************************************************************
* File Name:   main.c
*
* Description: This is the source code for the RDK3 Hello World
*              Application for ModusToolbox.
*
* Related Document: See README.md
*
*
*  Created on: 2022-10-21
*  Company: Rutronik Elektronische Bauelemente GmbH
*  Address: Jonavos g. 30, Kaunas 44262, Lithuania
*  Author: GDR, EDE
*
*******************************************************************************
* (c) 2019-2021, Cypress Semiconductor Corporation. All rights reserved.
*******************************************************************************
* This software, including source code, documentation and related materials
* ("Software"), is owned by Cypress Semiconductor Corporation or one of its
* subsidiaries ("Cypress") and is protected by and subject to worldwide patent
* protection (United States and foreign), United States copyright laws and
* international treaty provisions. Therefore, you may use this Software only
* as provided in the license agreement accompanying the software package from
* which you obtained this Software ("EULA").
*
* If no EULA applies, Cypress hereby grants you a personal, non-exclusive,
* non-transferable license to copy, modify, and compile the Software source
* code solely for use in connection with Cypress's integrated circuit products.
* Any reproduction, modification, translation, compilation, or representation
* of this Software except as specified above is prohibited without the express
* written permission of Cypress.
*
* Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT, IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress
* reserves the right to make changes to the Software without notice. Cypress
* does not assume any liability arising out of the application or use of the
* Software or any product or circuit described in the Software. Cypress does
* not authorize its products for use in any products where a malfunction or
* failure of the Cypress product may reasonably be expected to result in
* significant property damage, injury or death ("High Risk Product"). By
* including Cypress's product in a High Risk Product, the manufacturer of such
* system or application assumes all risk of such use and in doing so agrees to
* indemnify Cypress against all liability.
*
* Rutronik Elektronische Bauelemente GmbH Disclaimer: The evaluation board
* including the software is for testing purposes only and,
* because it has limited functions and limited resilience, is not suitable
* for permanent use under real conditions. If the evaluation board is
* nevertheless used under real conditions, this is done at one’s responsibility;
* any liability of Rutronik is insofar excluded
*******************************************************************************/

#include "cy_pdl.h"
#include "cyhal.h"
#include "cybsp.h"
#include "cy_retarget_io.h"
#include "ams_rutdk2_i2c.h"
#include "rutdk2_timer.h"
#include "tmf882x_example_simple.h"

int main(void)
{
    cy_rslt_t result;

    /* Initialize the device and board peripherals */
    result = cybsp_init() ;
    if (result != CY_RSLT_SUCCESS)
    {CY_ASSERT(0);}
    result = cy_retarget_io_init(KITPROG_TX, KITPROG_RX, CY_RETARGET_IO_BAUDRATE);
    if (result != CY_RSLT_SUCCESS)
    {CY_ASSERT(0);}

    /*Initialize LEDs*/
    result = cyhal_gpio_init( LED1, CYHAL_GPIO_DIR_OUTPUT, CYHAL_GPIO_DRIVE_STRONG, CYBSP_LED_STATE_OFF);
    if (result != CY_RSLT_SUCCESS)
    {CY_ASSERT(0);}
    result = cyhal_gpio_init( LED2, CYHAL_GPIO_DIR_OUTPUT, CYHAL_GPIO_DRIVE_STRONG, CYBSP_LED_STATE_OFF);
    if (result != CY_RSLT_SUCCESS)
    {CY_ASSERT(0);}

    /*Initialize Buttons*/
    result = cyhal_gpio_init(USER_BTN1, CYHAL_GPIO_DIR_INPUT, CYHAL_GPIO_DRIVE_NONE, false);
    if (result != CY_RSLT_SUCCESS)
    {CY_ASSERT(0);}
    result = cyhal_gpio_init(USER_BTN2, CYHAL_GPIO_DIR_INPUT, CYHAL_GPIO_DRIVE_NONE, false);
    if (result != CY_RSLT_SUCCESS)
    {CY_ASSERT(0);}

    /*I2C Initialization*/
    rutdk2_i2c_init();
    /*Systick timer for the TMF882x firmware stack*/
    rutdk2_hal_timer_init();

    __enable_irq();

    /*Run the TMF882x firmware stack demo*/
    tmf882x_example_run();

    /*Never returns here*/
    for (;;)
    {
    }
}

/* [] END OF FILE */