test_bilinear_interp_v2_op.py

#   Copyright (c) 2018 PaddlePaddle Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

import unittest

import numpy as np
from eager_op_test import OpTest, convert_float_to_uint16

import paddle
from paddle import fluid
from paddle.fluid import core
from paddle.nn.functional import interpolate


def create_test_case0(self):
    self.interp_method = 'bilinear'
    self.input_shape = [2, 3, 5, 5]
    self.out_h = 2
    self.out_w = 2
    self.scale = []
    self.out_size = np.array([3, 3]).astype("int32")
    self.align_corners = True
    self.align_mode = 1


def create_test_case1(self):
    self.interp_method = 'bilinear'
    self.input_shape = [4, 1, 7, 8]
    self.out_h = 1
    self.out_w = 1
    self.scale = []
    self.align_corners = True
    self.align_mode = 1


def create_test_case2(self):
    self.interp_method = 'bilinear'
    self.input_shape = [3, 3, 9, 6]
    self.out_h = 12
    self.out_w = 12
    self.scale = []
    self.align_corners = True
    self.align_mode = 1


def create_test_case3(self):
    self.interp_method = 'bilinear'
    self.input_shape = [1, 1, 32, 64]
    self.out_h = 64
    self.out_w = 32
    self.scale = []
    self.align_corners = True
    self.align_mode = 1


def create_test_case4(self):
    self.interp_method = 'bilinear'
    self.input_shape = [4, 1, 7, 8]
    self.out_h = 1
    self.out_w = 1
    self.scale = []
    self.out_size = np.array([2, 2]).astype("int32")
    self.align_corners = True
    self.align_mode = 1


def create_test_case5(self):
    self.interp_method = 'bilinear'
    self.input_shape = [3, 3, 9, 6]
    self.out_h = 12
    self.out_w = 12
    self.scale = []
    self.out_size = np.array([11, 11]).astype("int32")
    self.align_corners = True
    self.align_mode = 1


def create_test_case6(self):
    self.interp_method = 'bilinear'
    self.input_shape = [1, 1, 32, 64]
    self.out_h = 64
    self.out_w = 32
    self.scale = []
    self.out_size = np.array([65, 33]).astype("int32")
    self.align_corners = True
    self.align_mode = 1


def create_test_case7(self):
    self.interp_method = 'bilinear'
    self.input_shape = [1, 1, 32, 64]
    self.out_h = 64
    self.out_w = 32
    self.scale = [2.0, 0.5]
    self.align_corners = False
    self.align_mode = 1


def bilinear_interp_test(
    x,
    OutSize=None,
    SizeTensor=None,
    Scale=None,
    data_layout='NCHW',
    out_d=-1,
    out_h=-1,
    out_w=-1,
    scale=[],
    interp_method='bilinear',
    align_corners=True,
    align_mode=0,
):
    if isinstance(scale, float) or isinstance(scale, int):
        scale_list = []
        for _ in range(len(x.shape) - 2):
            scale_list.append(scale)
        scale = list(map(float, scale_list))
    elif isinstance(scale, list) or isinstance(scale, tuple):
        scale = list(map(float, scale))
    if SizeTensor is not None:
        if not isinstance(SizeTensor, list) and not isinstance(
            SizeTensor, tuple
        ):
            SizeTensor = [SizeTensor]
    return paddle._C_ops.bilinear_interp(
        x,
        OutSize,
        SizeTensor,
        Scale,
        data_layout,
        out_d,
        out_h,
        out_w,
        scale,
        interp_method,
        align_corners,
        align_mode,
    )


def bilinear_interp_np(
    input,
    out_h,
    out_w,
    scale_w=0,
    scale_h=0,
    out_size=None,
    actual_shape=None,
    align_corners=True,
    align_mode=0,
    data_layout='NCHW',
):
    """bilinear interpolation implement in shape [N, C, H, W]"""
    if data_layout == "NHWC":
        input = np.transpose(input, (0, 3, 1, 2))  # NHWC => NCHW
    if out_size is not None:
        out_h = out_size[0]
        out_w = out_size[1]
    if actual_shape is not None:
        out_h = actual_shape[0]
        out_w = actual_shape[1]
    batch_size, channel, in_h, in_w = input.shape

    ratio_h = ratio_w = 0.0
    if out_h > 1:
        if align_corners:
            ratio_h = (in_h - 1.0) / (out_h - 1.0)
        else:
            if scale_h > 0:
                ratio_h = 1.0 / scale_h
            else:
                ratio_h = 1.0 * in_h / out_h
    if out_w > 1:
        if align_corners:
            ratio_w = (in_w - 1.0) / (out_w - 1.0)
        else:
            if scale_w > 0:
                ratio_w = 1.0 / scale_w
            else:
                ratio_w = 1.0 * in_w / out_w

    out = np.zeros((batch_size, channel, out_h, out_w))

    for i in range(out_h):
        if align_mode == 0 and not align_corners:
            h = int(ratio_h * (i + 0.5) - 0.5)
        else:
            h = int(ratio_h * i)

        h = max(0, h)
        hid = 1 if h < in_h - 1 else 0
        if align_mode == 0 and not align_corners:
            idx_src_h = max(ratio_h * (i + 0.5) - 0.5, 0)
            h1lambda = idx_src_h - h
        else:
            h1lambda = ratio_h * i - h
        h2lambda = 1.0 - h1lambda
        for j in range(out_w):
            if align_mode == 0 and not align_corners:
                w = int(ratio_w * (j + 0.5) - 0.5)
            else:
                w = int(ratio_w * j)
            w = max(0, w)
            wid = 1 if w < in_w - 1 else 0
            if align_mode == 0 and not align_corners:
                idx_src_w = max(ratio_w * (j + 0.5) - 0.5, 0)
                w1lambda = idx_src_w - w
            else:
                w1lambda = ratio_w * j - w
            w2lambda = 1.0 - w1lambda

            out[:, :, i, j] = h2lambda * (
                w2lambda * input[:, :, h, w]
                + w1lambda * input[:, :, h, w + wid]
            ) + h1lambda * (
                w2lambda * input[:, :, h + hid, w]
                + w1lambda * input[:, :, h + hid, w + wid]
            )

    if data_layout == "NHWC":
        out = np.transpose(out, (0, 2, 3, 1))  # NCHW => NHWC

    return out.astype(input.dtype)


class TestBilinearInterpOp(OpTest):
    def setUp(self):
        self.python_api = bilinear_interp_test
        self.out_size = None
        self.actual_shape = None
        self.data_layout = 'NCHW'
        self.dtype = np.float64
        self.init_test_case()
        self.op_type = "bilinear_interp_v2"
        input_np = np.random.random(self.input_shape).astype(self.dtype)

        if self.data_layout == "NCHW":
            in_h = self.input_shape[2]
            in_w = self.input_shape[3]
        else:
            in_h = self.input_shape[1]
            in_w = self.input_shape[2]
        scale_h = 0
        scale_w = 0
        if self.scale:
            if isinstance(self.scale, float) or isinstance(self.scale, int):
                if self.scale > 0.0:
                    scale_h = scale_w = float(self.scale)
            if isinstance(self.scale, list) and len(self.scale) == 1:
                scale_w = scale_h = self.scale[0]
            elif isinstance(self.scale, list) and len(self.scale) > 1:
                scale_w = self.scale[1]
                scale_h = self.scale[0]
            out_h = int(in_h * scale_h)
            out_w = int(in_w * scale_w)
        else:
            out_h = self.out_h
            out_w = self.out_w

        output_np = bilinear_interp_np(
            input_np,
            out_h,
            out_w,
            0,
            0,
            self.out_size,
            self.actual_shape,
            self.align_corners,
            self.align_mode,
            self.data_layout,
        )
        self.inputs = {'X': input_np}
        if self.out_size is not None:
            self.inputs['OutSize'] = self.out_size
        if self.actual_shape is not None:
            self.inputs['OutSize'] = self.actual_shape

        self.attrs = {
            'out_h': self.out_h,
            'out_w': self.out_w,
            'interp_method': self.interp_method,
            'align_corners': self.align_corners,
            'align_mode': self.align_mode,
            'data_layout': self.data_layout,
        }
        if self.scale:
            if isinstance(self.scale, float) or isinstance(self.scale, int):
                if self.scale > 0.0:
                    self.scale = [self.scale]
            if isinstance(self.scale, list) and len(self.scale) == 1:
                self.scale = [self.scale[0], self.scale[0]]
            self.attrs['scale'] = self.scale
        self.outputs = {'Out': output_np}

    def test_check_output(self):
        self.check_output()

    def test_check_grad(self):
        self.check_grad(['X'], 'Out', in_place=True)

    def init_test_case(self):
        create_test_case0(self)


class TestBilinearInterpCase1(TestBilinearInterpOp):
    def init_test_case(self):
        create_test_case1(self)


class TestBilinearInterpCase2(TestBilinearInterpOp):
    def init_test_case(self):
        create_test_case2(self)


class TestBilinearInterpCase3(TestBilinearInterpOp):
    def init_test_case(self):
        create_test_case3(self)


class TestBilinearInterpCase4(TestBilinearInterpOp):
    def init_test_case(self):
        create_test_case4(self)


class TestBilinearInterpCase5(TestBilinearInterpOp):
    def init_test_case(self):
        create_test_case5(self)


class TestBilinearInterpCase6(TestBilinearInterpOp):
    def init_test_case(self):
        create_test_case6(self)


class TestBilinearInterpCase7(TestBilinearInterpOp):
    def init_test_case(self):
        create_test_case7(self)


class TestBilinearInterpSame(TestBilinearInterpOp):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [2, 3, 32, 64]
        self.out_h = 32
        self.out_w = 64
        self.scale = []
        self.align_corners = True
        self.align_mode = 1


class TestBilinearInterpActualShape(TestBilinearInterpOp):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [3, 2, 32, 16]
        self.out_h = 64
        self.out_w = 32
        self.scale = []
        self.out_size = np.array([66, 40]).astype("int32")
        self.align_corners = True
        self.align_mode = 1


class TestBilinearInterpDataLayout(TestBilinearInterpOp):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [2, 5, 5, 3]
        self.out_h = 2
        self.out_w = 2
        self.scale = []
        self.out_size = np.array([3, 3]).astype("int32")
        self.align_corners = True
        self.align_mode = 1
        self.data_layout = "NHWC"


class TestBilinearInterpOpFP16(TestBilinearInterpOp):
    def test_check_output(self):
        self.check_output(atol=1e-3)

    def test_check_grad(self):
        self.check_grad(['X'], 'Out', in_place=True, max_relative_error=1e-2)

    def init_test_case(self):
        create_test_case0(self)
        self.dtype = np.float16


class TestBilinearInterpCase1FP16(TestBilinearInterpOpFP16):
    def init_test_case(self):
        create_test_case1(self)
        self.dtype = np.float16


class TestBilinearInterpCase2FP16(TestBilinearInterpOpFP16):
    def init_test_case(self):
        create_test_case2(self)
        self.dtype = np.float16


class TestBilinearInterpCase3FP16(TestBilinearInterpOpFP16):
    def init_test_case(self):
        create_test_case3(self)
        self.dtype = np.float16


class TestBilinearInterpCase4FP16(TestBilinearInterpOpFP16):
    def init_test_case(self):
        create_test_case4(self)
        self.dtype = np.float16


class TestBilinearInterpCase5FP16(TestBilinearInterpOpFP16):
    def init_test_case(self):
        create_test_case5(self)
        self.dtype = np.float16


class TestBilinearInterpCase6FP16(TestBilinearInterpOpFP16):
    def init_test_case(self):
        create_test_case6(self)
        self.dtype = np.float16


class TestBilinearInterpCase7FP16(TestBilinearInterpOpFP16):
    def init_test_case(self):
        create_test_case7(self)
        self.dtype = np.float16


@unittest.skipIf(
    not core.is_compiled_with_cuda()
    or not core.is_bfloat16_supported(core.CUDAPlace(0)),
    "core is not compiled with CUDA or not support the bfloat16",
)
class TestBilinearInterpOpBF16(OpTest):
    def setUp(self):
        self.python_api = bilinear_interp_test
        self.out_size = None
        self.actual_shape = None
        self.data_layout = 'NCHW'
        self.init_test_case()
        self.op_type = "bilinear_interp_v2"
        self.dtype = np.uint16
        input_np = np.random.random(self.input_shape).astype("float32")

        if self.data_layout == "NCHW":
            in_h = self.input_shape[2]
            in_w = self.input_shape[3]
        else:
            in_h = self.input_shape[1]
            in_w = self.input_shape[2]
        scale_h = 0
        scale_w = 0
        if self.scale:
            if isinstance(self.scale, float) or isinstance(self.scale, int):
                if self.scale > 0.0:
                    scale_h = scale_w = float(self.scale)
            if isinstance(self.scale, list) and len(self.scale) == 1:
                scale_w = scale_h = self.scale[0]
            elif isinstance(self.scale, list) and len(self.scale) > 1:
                scale_w = self.scale[1]
                scale_h = self.scale[0]
            out_h = int(in_h * scale_h)
            out_w = int(in_w * scale_w)
        else:
            out_h = self.out_h
            out_w = self.out_w

        output_np = bilinear_interp_np(
            input_np,
            out_h,
            out_w,
            0,
            0,
            self.out_size,
            self.actual_shape,
            self.align_corners,
            self.align_mode,
            self.data_layout,
        )
        self.inputs = {'X': convert_float_to_uint16(input_np)}
        if self.out_size is not None:
            self.inputs['OutSize'] = self.out_size
        if self.actual_shape is not None:
            self.inputs['OutSize'] = self.actual_shape

        self.attrs = {
            'out_h': self.out_h,
            'out_w': self.out_w,
            'interp_method': self.interp_method,
            'align_corners': self.align_corners,
            'align_mode': self.align_mode,
            'data_layout': self.data_layout,
        }
        if self.scale:
            if isinstance(self.scale, float) or isinstance(self.scale, int):
                if self.scale > 0.0:
                    self.scale = [self.scale]
            if isinstance(self.scale, list) and len(self.scale) == 1:
                self.scale = [self.scale[0], self.scale[0]]
            self.attrs['scale'] = self.scale
        self.outputs = {'Out': convert_float_to_uint16(output_np)}

    def test_check_output(self):
        self.check_output(atol=1e-2)

    def test_check_grad(self):
        self.check_grad(['X'], 'Out', in_place=True, max_relative_error=1e-2)

    def init_test_case(self):
        create_test_case0(self)


@unittest.skipIf(
    not core.is_compiled_with_cuda()
    or not core.is_bfloat16_supported(core.CUDAPlace(0)),
    "core is not compiled with CUDA or not support the bfloat16",
)
class TestBilinearInterpCase1BF16(TestBilinearInterpOpBF16):
    def init_test_case(self):
        create_test_case1(self)


@unittest.skipIf(
    not core.is_compiled_with_cuda()
    or not core.is_bfloat16_supported(core.CUDAPlace(0)),
    "core is not compiled with CUDA or not support the bfloat16",
)
class TestBilinearInterpCase2BF16(TestBilinearInterpOpBF16):
    def init_test_case(self):
        create_test_case2(self)


@unittest.skipIf(
    not core.is_compiled_with_cuda()
    or not core.is_bfloat16_supported(core.CUDAPlace(0)),
    "core is not compiled with CUDA or not support the bfloat16",
)
class TestBilinearInterpCase3BF16(TestBilinearInterpOpBF16):
    def init_test_case(self):
        create_test_case3(self)


@unittest.skipIf(
    not core.is_compiled_with_cuda()
    or not core.is_bfloat16_supported(core.CUDAPlace(0)),
    "core is not compiled with CUDA or not support the bfloat16",
)
class TestBilinearInterpCase4BF16(TestBilinearInterpOpBF16):
    def init_test_case(self):
        create_test_case4(self)


@unittest.skipIf(
    not core.is_compiled_with_cuda()
    or not core.is_bfloat16_supported(core.CUDAPlace(0)),
    "core is not compiled with CUDA or not support the bfloat16",
)
class TestBilinearInterpCase5BF16(TestBilinearInterpOpBF16):
    def init_test_case(self):
        create_test_case5(self)


@unittest.skipIf(
    not core.is_compiled_with_cuda()
    or not core.is_bfloat16_supported(core.CUDAPlace(0)),
    "core is not compiled with CUDA or not support the bfloat16",
)
class TestBilinearInterpCase6BF16(TestBilinearInterpOpBF16):
    def init_test_case(self):
        create_test_case6(self)


@unittest.skipIf(
    not core.is_compiled_with_cuda()
    or not core.is_bfloat16_supported(core.CUDAPlace(0)),
    "core is not compiled with CUDA or not support the bfloat16",
)
class TestBilinearInterpCase7BF16(TestBilinearInterpOpBF16):
    def init_test_case(self):
        create_test_case7(self)


class TestBilinearInterpOpUint8(OpTest):
    def setUp(self):
        self.python_api = bilinear_interp_test
        self.out_size = None
        self.actual_shape = None
        self.init_test_case()
        self.op_type = "bilinear_interp_v2"
        input_np = np.random.randint(
            low=0, high=256, size=self.input_shape
        ).astype("uint8")

        if self.scale:
            if isinstance(self.scale, float) or isinstance(self.scale, int):
                if self.scale > 0:
                    scale_h = scale_w = float(self.scale)
            if isinstance(self.scale, list) and len(self.scale) == 1:
                scale_w = scale_h = self.scale[0]
            elif isinstance(self.scale, list) and len(self.scale) > 1:
                scale_w = self.scale[1]
                scale_h = self.scale[0]
            out_h = int(self.input_shape[2] * scale_h)
            out_w = int(self.input_shape[3] * scale_w)
        else:
            out_h = self.out_h
            out_w = self.out_w

        output_np = bilinear_interp_np(
            input_np,
            out_h,
            out_w,
            0,
            0,
            self.out_size,
            self.actual_shape,
            self.align_corners,
            self.align_mode,
        )
        self.inputs = {'X': input_np}
        if self.out_size is not None:
            self.inputs['OutSize'] = self.out_size

        self.attrs = {
            'out_h': self.out_h,
            'out_w': self.out_w,
            'interp_method': self.interp_method,
            'align_corners': self.align_corners,
            'align_mode': self.align_mode,
        }
        if self.scale:
            if isinstance(self.scale, float) or isinstance(self.scale, int):
                if self.scale > 0:
                    self.scale = [self.scale]
            if isinstance(self.scale, list) and len(self.scale) == 1:
                self.scale = [self.scale[0], self.scale[0]]
            self.attrs['scale'] = self.scale
        self.outputs = {'Out': output_np}

    def test_check_output(self):
        self.check_output_with_place(place=core.CPUPlace(), atol=1)

    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [1, 3, 9, 6]
        self.out_h = 10
        self.out_w = 9
        self.scale = []
        self.align_corners = True
        self.align_mode = 1


class TestBilinearInterpCase1Uint8(TestBilinearInterpOpUint8):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [2, 3, 32, 64]
        self.out_h = 64
        self.out_w = 32
        self.scale = []
        self.align_corners = True
        self.align_mode = 1


class TestBilinearInterpCase2Uint8(TestBilinearInterpOpUint8):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [4, 1, 7, 8]
        self.out_h = 5
        self.out_w = 13
        self.scale = []
        self.out_size = np.array([6, 15]).astype("int32")
        self.align_corners = True
        self.align_mode = 1


class TestBilinearInterpOtherMethod1(TestBilinearInterpOp):
    def set_align_mode(self):
        self.align_corners = False
        self.align_mode = 1


class TestBilinearInterpWithMethod2(TestBilinearInterpOp):
    def set_align_mode(self):
        self.align_corners = False
        self.align_mode = 0


class TestBilinearInterpWithMethod3(TestBilinearInterpOp):
    def set_align_mode(self):
        self.align_corners = True
        self.align_mode = 0


class TestBilinearInterpScale1(TestBilinearInterpOp):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [2, 3, 5, 7]
        self.out_h = 60
        self.out_w = 25
        self.scale = 2.0
        self.align_corners = True
        self.align_mode = 1


class TestBilinearInterpScale2(TestBilinearInterpOp):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [2, 3, 5, 7]
        self.out_h = 60
        self.out_w = 25
        self.scale = 1.0
        self.align_corners = True
        self.align_mode = 1


class TestBilinearInterpScale3(TestBilinearInterpOp):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [2, 3, 5, 7]
        self.out_h = 60
        self.out_w = 25
        self.scale = 1.5
        self.align_corners = True
        self.align_mode = 1


class TestBilinearInterpScale4(TestBilinearInterpOp):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [2, 3, 5, 7]
        self.out_h = 60
        self.out_w = 25
        self.scale = [1.5, 0.5]
        self.align_corners = True
        self.align_mode = 1


class TestBilinearInterpZero(TestBilinearInterpOp):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [2, 3, 5, 7]
        self.out_h = 60
        self.out_w = 25
        self.scale = 0.2
        self.align_corners = False
        self.align_mode = 0


class TestBilinearInterpOp_attr_tensor(OpTest):
    def setUp(self):
        self.python_api = bilinear_interp_test
        self.out_size = None
        self.actual_shape = None
        self.init_test_case()
        self.op_type = "bilinear_interp_v2"
        self.shape_by_1Dtensor = False
        self.scale_by_1Dtensor = False
        self.attrs = {
            'interp_method': self.interp_method,
            'align_corners': self.align_corners,
        }

        input_np = np.random.random(self.input_shape).astype("float64")
        self.inputs = {'X': input_np}

        if self.scale_by_1Dtensor:
            self.inputs['Scale'] = np.array([self.scale]).astype("float32")
        elif self.scale:
            if isinstance(self.scale, float) or isinstance(self.scale, int):
                if self.scale > 0:
                    scale_h = scale_w = float(self.scale)
            if isinstance(self.scale, list) and len(self.scale) == 1:
                scale_w = scale_h = self.scale[0]
            elif isinstance(self.scale, list) and len(self.scale) > 1:
                scale_w = self.scale[1]
                scale_h = self.scale[0]
            out_h = int(self.input_shape[2] * scale_h)
            out_w = int(self.input_shape[3] * scale_w)
        else:
            out_h = self.out_h
            out_w = self.out_w

        if self.shape_by_1Dtensor:
            self.inputs['OutSize'] = self.out_size
        elif self.out_size is not None:
            size_tensor = []
            for index, ele in enumerate(self.out_size):
                size_tensor.append(
                    ("x" + str(index), np.ones(1).astype('int32') * ele)
                )
            self.inputs['SizeTensor'] = size_tensor

        self.attrs['out_h'] = self.out_h
        self.attrs['out_w'] = self.out_w
        if self.scale:
            if isinstance(self.scale, float) or isinstance(self.scale, int):
                if self.scale > 0:
                    self.scale = [self.scale]
            if isinstance(self.scale, list) and len(self.scale) == 1:
                self.scale = [self.scale[0], self.scale[0]]
            self.attrs['scale'] = self.scale
        output_np = bilinear_interp_np(
            input_np,
            out_h,
            out_w,
            0,
            0,
            self.out_size,
            self.actual_shape,
            self.align_corners,
        )
        self.outputs = {'Out': output_np}

    def test_check_output(self):
        self.check_output()

    def test_check_grad(self):
        self.check_grad(['X'], 'Out', in_place=True)

    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [2, 3, 5, 5]
        self.out_h = 3
        self.out_w = 3
        self.scale = []
        self.out_size = [3, 3]
        self.align_corners = True


# out_size is a 1-D tensor
class TestBilinearInterp_attr_tensor_Case1(TestBilinearInterpOp_attr_tensor):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [3, 3, 9, 6]
        self.out_h = 12
        self.out_w = 12
        self.scale = []
        self.out_size = [8, 12]
        self.align_corners = True


# scale is a 1-D tensor
class TestBilinearInterp_attr_tensor_Case2(TestBilinearInterpOp_attr_tensor):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [3, 2, 32, 16]
        self.out_h = 64
        self.out_w = 32
        self.scale = []
        self.out_size = np.array([66, 40]).astype("int32")
        self.align_corners = True
        self.shape_by_1Dtensor = True


# scale is a 1-D tensor
class TestBilinearInterp_attr_tensor_Case3(TestBilinearInterpOp_attr_tensor):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [3, 2, 32, 16]
        self.out_h = 64
        self.out_w = 32
        self.scale = 2.0
        self.out_size = None
        self.align_corners = True
        self.scale_by_1Dtensor = True


class TestBilinearInterpOpAPI_dy(unittest.TestCase):
    def test_case(self):
        import paddle

        if core.is_compiled_with_cuda():
            place = core.CUDAPlace(0)
        else:
            place = core.CPUPlace()
        with fluid.dygraph.guard(place):
            input_data = np.random.random((2, 3, 6, 6)).astype("float32")
            input_x = paddle.to_tensor(input_data)
            expect_res = bilinear_interp_np(
                input_data, out_h=12, out_w=12, align_corners=False
            )
            out = interpolate(
                x=input_x, size=[12, 12], mode="bilinear", align_corners=False
            )
            np.testing.assert_allclose(out.numpy(), expect_res, rtol=1e-05)


class TestBilinearInterpOpAPI_dy2(unittest.TestCase):
    def test_case(self):
        import paddle

        if core.is_compiled_with_cuda():
            place = core.CUDAPlace(0)
        else:
            place = core.CPUPlace()
        with fluid.dygraph.guard(place):
            input_data = np.random.random((2, 3, 6, 6)).astype("float32")
            size_np = np.array([12, 12]).astype("int64")
            input_x = paddle.to_tensor(input_data)
            size = paddle.to_tensor(size_np)
            expect_res = bilinear_interp_np(
                input_data, out_h=12, out_w=12, align_corners=False
            )
            out = interpolate(
                x=input_x, size=size, mode="bilinear", align_corners=False
            )
            np.testing.assert_allclose(out.numpy(), expect_res, rtol=1e-05)


class TestBilinearInterpOpAPI_dy3(unittest.TestCase):
    def test_case(self):
        import paddle

        if core.is_compiled_with_cuda():
            place = core.CUDAPlace(0)
        else:
            place = core.CPUPlace()
        with fluid.dygraph.guard(place):
            input_data = np.random.random((2, 3, 6, 6)).astype("float32")
            size_1 = np.array([12]).astype("int64")
            input_x = paddle.to_tensor(input_data)
            size = paddle.to_tensor(size_1)
            expect_res = bilinear_interp_np(
                input_data, out_h=12, out_w=12, align_corners=False
            )
            out = interpolate(
                x=input_x,
                size=[size, size],
                mode="bilinear",
                align_corners=False,
            )
            np.testing.assert_allclose(out.numpy(), expect_res, rtol=1e-05)


class TestBilinearInterpOpAPI_dy4(unittest.TestCase):
    def test_case(self):
        import paddle

        if core.is_compiled_with_cuda():
            place = core.CUDAPlace(0)
        else:
            place = core.CPUPlace()
        with fluid.dygraph.guard(place):
            input_data = np.random.random((2, 3, 6, 6)).astype("float32")
            scale_np = np.array([2, 2]).astype("int64")
            input_x = paddle.to_tensor(input_data)
            scale = paddle.to_tensor(scale_np)
            expect_res = bilinear_interp_np(
                input_data, out_h=12, out_w=12, align_corners=False
            )
            out = interpolate(
                x=input_x,
                scale_factor=scale,
                mode="bilinear",
                align_corners=False,
            )
            np.testing.assert_allclose(out.numpy(), expect_res, rtol=1e-05)


@unittest.skipIf(
    not fluid.core.is_compiled_with_cuda(), "core is not compiled with CUDA"
)
class TestBilinearInterpOpZoomOutForFloat16(unittest.TestCase):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [2, 3, 5, 5]
        self.out_size = np.array([3, 3]).astype("int32")
        self.align_corners = True
        self.align_mode = 1
        self.data_layout = 'NCHW'

    def check_main(self, x_np, dtype):
        paddle.disable_static()
        x_np = x_np.astype(dtype)
        x = paddle.to_tensor(x_np)
        x.stop_gradient = False
        y = interpolate(
            x,
            size=self.out_size.tolist(),
            mode=self.interp_method,
            align_mode=self.align_mode,
            align_corners=self.align_corners,
            data_format=self.data_layout,
        )
        x_g = paddle.grad(y, x)
        y_np = y[0].numpy().astype('float32')
        x_g_np = x_g[0].numpy().astype('float32')
        paddle.enable_static()
        return y_np, x_g_np

    def test_main(self):
        self.init_test_case()
        x_np = np.random.random(self.input_shape).astype("float16")

        y_np_1, x_g_np_1 = self.check_main(x_np, 'float16')
        y_np_2, x_g_np_2 = self.check_main(x_np, 'float32')

        np.testing.assert_allclose(y_np_1, y_np_2, atol=1e-3, rtol=1e-3)
        # Since atomicAdd half will bring some diff, here we relax tolerance to 1e-2.
        np.testing.assert_allclose(x_g_np_1, x_g_np_2, atol=1e-2, rtol=1e-2)


@unittest.skipIf(
    not fluid.core.is_compiled_with_cuda(), "core is not compiled with CUDA"
)
class TestBilinearInterpOpZoomInForFloat16(unittest.TestCase):
    def init_test_case(self):
        self.interp_method = 'bilinear'
        self.input_shape = [2, 3, 5, 5]
        self.out_size = np.array([10, 10]).astype("int32")
        self.align_corners = True
        self.align_mode = 1
        self.data_layout = 'NCHW'

    def check_main(self, x_np, dtype):
        paddle.disable_static()
        x_np = x_np.astype(dtype)
        x = paddle.to_tensor(x_np)
        x.stop_gradient = False
        y = interpolate(
            x,
            size=self.out_size.tolist(),
            mode=self.interp_method,
            align_mode=self.align_mode,
            align_corners=self.align_corners,
            data_format=self.data_layout,
        )
        x_g = paddle.grad(y, x)
        y_np = y[0].numpy().astype('float32')
        x_g_np = x_g[0].numpy().astype('float32')
        paddle.enable_static()
        return y_np, x_g_np

    def test_main(self):
        self.init_test_case()
        x_np = np.random.random(self.input_shape).astype("float16")

        y_np_1, x_g_np_1 = self.check_main(x_np, 'float16')
        y_np_2, x_g_np_2 = self.check_main(x_np, 'float32')

        np.testing.assert_allclose(y_np_1, y_np_2, atol=1e-3, rtol=1e-3)
        # Since atomicAdd half will bring some diff, here we relax tolerance to 1e-2.
        np.testing.assert_allclose(x_g_np_1, x_g_np_2, atol=1e-2, rtol=1e-2)


class TestBilinearInterpOpAPI_0DTensorScale(unittest.TestCase):
    def test_case(self):
        import paddle

        if core.is_compiled_with_cuda():
            place = core.CUDAPlace(0)
        else:
            place = core.CPUPlace()
        with fluid.dygraph.guard(place):
            input_data = np.random.random((2, 3, 6, 6)).astype("float32")
            input_x = paddle.to_tensor(input_data)
            expect_res = bilinear_interp_np(
                input_data, out_h=12, out_w=12, align_corners=False
            )
            scale_0d = paddle.full([], 2)
            out = interpolate(
                x=input_x,
                scale_factor=scale_0d,
                mode="bilinear",
                align_corners=False,
            )
            np.testing.assert_allclose(out.numpy(), expect_res, rtol=1e-05)


class TestBilinearInterpOpAPI_0DTensorScale2(unittest.TestCase):
    def test_case(self):
        import paddle

        if core.is_compiled_with_cuda():
            place = core.CUDAPlace(0)
        else:
            place = core.CPUPlace()
        with fluid.dygraph.guard(place):
            input_data = np.random.random((2, 3, 6, 6)).astype("float32")
            input_x = paddle.to_tensor(input_data)
            expect_res = bilinear_interp_np(
                input_data, out_h=12, out_w=12, align_corners=False
            )
            scale_0d = [paddle.full([], 2), paddle.full([], 2)]
            out = interpolate(
                x=input_x,
                scale_factor=scale_0d,
                mode="bilinear",
                align_corners=False,
            )
            np.testing.assert_allclose(out.numpy(), expect_res, rtol=1e-05)


class TestBilinearInterpOpAPI_0DTensorOutSize(unittest.TestCase):
    def test_case(self):
        import paddle

        if core.is_compiled_with_cuda():
            place = core.CUDAPlace(0)
        else:
            place = core.CPUPlace()
        with fluid.dygraph.guard(place):
            input_data = np.random.random((2, 3, 6, 6)).astype("float32")
            input_x = paddle.to_tensor(input_data)
            expect_res = bilinear_interp_np(
                input_data, out_h=12, out_w=12, align_corners=False
            )
            output_size = [
                paddle.full([], 12, dtype="int32"),
                paddle.full([], 12, dtype="int32"),
            ]
            out = interpolate(
                x=input_x,
                size=output_size,
                mode="bilinear",
                align_corners=False,
            )
            np.testing.assert_allclose(out.numpy(), expect_res, rtol=1e-05)


if __name__ == "__main__":
    unittest.main()