Fpv fixes (#1217)

br-ext-chip-ingenic/board/t31/kernel/t31.generic-fpv.config

@@ -850,17 +850,17 @@ CONFIG_ATH9K_HTC=m
 # CONFIG_LIBERTAS is not set
 # CONFIG_P54_COMMON is not set
 # CONFIG_RT2X00 is not set
-CONFIG_RTLWIFI=m
-CONFIG_RTLWIFI_DEBUG=y
-CONFIG_RTL8192CU=m
-CONFIG_RTL8192C_COMMON=m
+# CONFIG_RTLWIFI is not set
+# CONFIG_RTLWIFI_DEBUG is not set
+# CONFIG_RTL8192CU is not set
+# CONFIG_RTL8192C_COMMON is not set
 # CONFIG_WL_TI is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_MWIFIEX is not set
 # CONFIG_BCM43341 is not set
 # CONFIG_BCMDHD_1_141_66 is not set
 # CONFIG_BCMDHD_AP6181 is not set
-CONFIG_MT7601_STA=y
+# CONFIG_MT7601_STA is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers

br-ext-chip-ingenic/configs/t31_fpv_defconfig

@@ -100,13 +100,13 @@ BR2_PACKAGE_WIRELESS_TOOLS=y
 # BR2_PACKAGE_WPA_SUPPLICANT_CLI is not set
 # BR2_PACKAGE_WPA_SUPPLICANT_NL80211 is not set
 # BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE is not set
-BR2_PACKAGE_LINUX_FIRMWARE_OPENIPC=y
+# BR2_PACKAGE_LINUX_FIRMWARE_OPENIPC is not set
 # BR2_PACKAGE_LINUX_FIRMWARE_OPENIPC_MEDIATEK_MT7601U is not set
-# BR2_PACKAGE_RTL8188EU is not set
+BR2_PACKAGE_RTL8812AU_OPENIPC=y
 
 # WIREGUARD
-BR2_PACKAGE_WIREGUARD_LINUX_COMPAT=y
-BR2_PACKAGE_WIREGUARD_TOOLS=y
+# BR2_PACKAGE_WIREGUARD_LINUX_COMPAT is not set
+# BR2_PACKAGE_WIREGUARD_TOOLS is not set
 
 # FPV
 BR2_PACKAGE_DATALINK=y

general/package/rtl8812au-openipc/0001-disable_8814_8821.patch

@@ -1,19 +1,21 @@
---- a/Makefile	2023-11-08 03:23:56.619884059 +0300
-+++ b/Makefile	2023-11-08 03:51:10.864807292 +0300
-@@ -39,7 +39,7 @@
+--- a/Makefile	2023-12-28 12:04:57.820353449 +0300
++++ b/Makefile	2023-12-28 12:31:56.636201729 +0300
+@@ -39,8 +39,8 @@
 
  ########################## WIFI IC ############################
  CONFIG_RTL8812A = y
 -CONFIG_RTL8821A = y
+-CONFIG_RTL8814A = y
 +CONFIG_RTL8821A = n
- CONFIG_RTL8814A = n
++CONFIG_RTL8814A = n
  ######################### Interface ###########################
  CONFIG_USB_HCI = y
+ ########################## Features ###########################
 @@ -206,9 +206,9 @@
  EXTRA_CFLAGS += -DDBG=0
  endif
 
--ifeq ($(CONFIG_RTL8812A)_$(CONFIG_RTL8821A), y_y)
+-ifeq ($(CONFIG_RTL8812A)_$(CONFIG_RTL8821A)_$(CONFIG_RTL8814A), y_y_y)
 +ifeq ($(CONFIG_RTL8812A)_$(CONFIG_RTL8821A)_$(CONFIG_RTL8814A), y_n_n)
 
 -EXTRA_CFLAGS += -DDRV_NAME=\"rtl88xxau_wfb\"

general/package/rtl8812au-openipc/0002-old_kernel_fix.patch

@@ -0,0 +1,36 @@
+diff -Naur a/os_dep/linux/ioctl_cfg80211.c b/os_dep/linux/ioctl_cfg80211.c
+--- a/os_dep/linux/ioctl_cfg80211.c	2023-12-28 04:55:44.047232205 +0300
++++ b/os_dep/linux/ioctl_cfg80211.c	2023-12-28 04:58:01.223544721 +0300
+@@ -4921,6 +4921,7 @@
+       //RTW_INFO("%s dvobj null\n", __func__);
+     }
+     switch(pHalData->current_channel_bw){
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 11, 0))
+       case CHANNEL_WIDTH_5:
+ 	//RTW_INFO("%s width 5\n", __func__);
+ 	width = NL80211_CHAN_WIDTH_5;
+@@ -4931,6 +4932,7 @@
+ 	width = NL80211_CHAN_WIDTH_10;
+ 	center_freq = control_freq;
+ 	break;
++#endif
+       case CHANNEL_WIDTH_20:
+ 	//RTW_INFO("%s width 20\n", __func__);
+ 	width = NL80211_CHAN_WIDTH_20;
+diff -Naur a/os_dep/linux/wifi_regd.c b/os_dep/linux/wifi_regd.c
+--- a/os_dep/linux/wifi_regd.c	2023-11-08 03:19:52.064089100 +0300
++++ b/os_dep/linux/wifi_regd.c	2023-12-28 04:57:52.047523712 +0300
+@@ -334,11 +334,11 @@
+ 				if (ch)
+ 					ch->flags &= ~(IEEE80211_CHAN_DISABLED|IEEE80211_CHAN_NO_HT40PLUS|
+ 						IEEE80211_CHAN_NO_HT40MINUS|IEEE80211_CHAN_NO_80MHZ|
+-						IEEE80211_CHAN_NO_160MHZ);
++						IEEE80211_CHAN_NO_160MHZ |
+ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 14, 0))
+ 						IEEE80211_CHAN_NO_IBSS|IEEE80211_CHAN_PASSIVE_SCAN);
+ #else
+-						IEEE80211_CHAN_NO_IR;
++						IEEE80211_CHAN_NO_IR);
+ #endif
+ 						//ch->flags = IEEE80211_CHAN_DISABLED;
+ 			}

general/scripts/excludes/t31_fpv.list

@@ -0,0 +1,15 @@
+etc/sensor/gc2083.yaml
+etc/sensor/gc2083-t31.bin
+etc/sensor/gc4023.yaml
+etc/sensor/gc4023-t31.bin
+etc/sensor/jxq03.yaml
+etc/sensor/jxq03-t31.bin
+etc/sensor/jxq03p.yaml
+etc/sensor/jxq03p-t31.bin
+etc/sensor/sc2232h.yaml
+etc/sensor/sc2232h-t31.bin
+lib/modules/3.10.14__isvp_swan_1.0__/ingenic/sensor_gc2083_t31.ko
+lib/modules/3.10.14__isvp_swan_1.0__/ingenic/sensor_gc4023_t31.ko
+lib/modules/3.10.14__isvp_swan_1.0__/ingenic/sensor_jxq03_t31.ko
+lib/modules/3.10.14__isvp_swan_1.0__/ingenic/sensor_jxq03p_t31.ko
+lib/modules/3.10.14__isvp_swan_1.0__/ingenic/sensor_sc2232h_t31.ko