diff --git a/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.all b/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.all index bb79e486d..f767995ec 100644 --- a/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.all +++ b/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.all @@ -230,6 +230,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/coupled_AM2_LM3_SIS2/Concurrent_ice_1deg/MOM_parameter_doc.all b/coupled_AM2_LM3_SIS2/Concurrent_ice_1deg/MOM_parameter_doc.all index dc1b8c490..9986b99e4 100644 --- a/coupled_AM2_LM3_SIS2/Concurrent_ice_1deg/MOM_parameter_doc.all +++ b/coupled_AM2_LM3_SIS2/Concurrent_ice_1deg/MOM_parameter_doc.all @@ -230,6 +230,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/coupled_AM2_LM3_SIS2/Intersperse_ice_1deg/MOM_parameter_doc.all b/coupled_AM2_LM3_SIS2/Intersperse_ice_1deg/MOM_parameter_doc.all index 451affb36..c1b5881ef 100644 --- a/coupled_AM2_LM3_SIS2/Intersperse_ice_1deg/MOM_parameter_doc.all +++ b/coupled_AM2_LM3_SIS2/Intersperse_ice_1deg/MOM_parameter_doc.all @@ -230,6 +230,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/Baltic/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic/MOM_parameter_doc.all index 7b18072d9..31a1c3941 100644 --- a/ice_ocean_SIS2/Baltic/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic/MOM_parameter_doc.all @@ -230,6 +230,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/Baltic_ALE_z_offline_tracers/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic_ALE_z_offline_tracers/MOM_parameter_doc.all index dd076701d..2b1e2962d 100644 --- a/ice_ocean_SIS2/Baltic_ALE_z_offline_tracers/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic_ALE_z_offline_tracers/MOM_parameter_doc.all @@ -257,6 +257,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.all index 6bd0eca27..e6abfd207 100644 --- a/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.all @@ -257,6 +257,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.all index d0b00fb0e..55e898f84 100644 --- a/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.all @@ -257,6 +257,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/Baltic_OM5_025/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic_OM5_025/MOM_parameter_doc.all index 8bd2fd5d2..9b1969211 100644 --- a/ice_ocean_SIS2/Baltic_OM5_025/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic_OM5_025/MOM_parameter_doc.all @@ -257,6 +257,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/Baltic_OM5nb_025/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic_OM5nb_025/MOM_parameter_doc.all index 0fe07dc2b..2c9c89a99 100644 --- a/ice_ocean_SIS2/Baltic_OM5nb_025/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic_OM5nb_025/MOM_parameter_doc.all @@ -253,6 +253,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.all b/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.all index e60dac4bb..a218d182f 100644 --- a/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.all @@ -257,6 +257,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.all b/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.all index 6254c696b..5ce4b404a 100644 --- a/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.all @@ -257,6 +257,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.all b/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.all index 2ae43c537..74e3c1f4f 100644 --- a/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.all @@ -257,6 +257,9 @@ USE_TRIPOLAR_GEOLONB_BUG = True ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/SIS2/MOM_parameter_doc.all b/ice_ocean_SIS2/SIS2/MOM_parameter_doc.all index 8d632aaee..404e7f4ec 100644 --- a/ice_ocean_SIS2/SIS2/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/SIS2/MOM_parameter_doc.all @@ -230,6 +230,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/SIS2_bergs_cgrid/MOM_parameter_doc.all b/ice_ocean_SIS2/SIS2_bergs_cgrid/MOM_parameter_doc.all index 4aa0f01eb..25c3fb207 100644 --- a/ice_ocean_SIS2/SIS2_bergs_cgrid/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/SIS2_bergs_cgrid/MOM_parameter_doc.all @@ -230,6 +230,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ice_ocean_SIS2/SIS2_cgrid/MOM_parameter_doc.all b/ice_ocean_SIS2/SIS2_cgrid/MOM_parameter_doc.all index e58588e43..93ccb9e27 100644 --- a/ice_ocean_SIS2/SIS2_cgrid/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/SIS2_cgrid/MOM_parameter_doc.all @@ -230,6 +230,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/cooling_only/BML/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/cooling_only/BML/MOM_parameter_doc.all index c1a9a21c5..d1f4b3f41 100644 --- a/ocean_only/CVmix_SCM_tests/cooling_only/BML/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/cooling_only/BML/MOM_parameter_doc.all @@ -228,6 +228,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/cooling_only/EPBL/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/cooling_only/EPBL/MOM_parameter_doc.all index f05736409..0584354b6 100644 --- a/ocean_only/CVmix_SCM_tests/cooling_only/EPBL/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/cooling_only/EPBL/MOM_parameter_doc.all @@ -240,6 +240,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/cooling_only/KPP/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/cooling_only/KPP/MOM_parameter_doc.all index 8cbc75389..4d9dcb966 100644 --- a/ocean_only/CVmix_SCM_tests/cooling_only/KPP/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/cooling_only/KPP/MOM_parameter_doc.all @@ -240,6 +240,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/mech_only/BML/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/mech_only/BML/MOM_parameter_doc.all index c3e9d053e..32d3a7352 100644 --- a/ocean_only/CVmix_SCM_tests/mech_only/BML/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/mech_only/BML/MOM_parameter_doc.all @@ -228,6 +228,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/mech_only/EPBL/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/mech_only/EPBL/MOM_parameter_doc.all index f375a2ff6..e09be4c5a 100644 --- a/ocean_only/CVmix_SCM_tests/mech_only/EPBL/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/mech_only/EPBL/MOM_parameter_doc.all @@ -240,6 +240,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/mech_only/KPP/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/mech_only/KPP/MOM_parameter_doc.all index 5cf3811c1..58e443bb3 100644 --- a/ocean_only/CVmix_SCM_tests/mech_only/KPP/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/mech_only/KPP/MOM_parameter_doc.all @@ -240,6 +240,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/skin_warming_wind/BML/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/skin_warming_wind/BML/MOM_parameter_doc.all index 27563cabb..7a2920cb6 100644 --- a/ocean_only/CVmix_SCM_tests/skin_warming_wind/BML/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/skin_warming_wind/BML/MOM_parameter_doc.all @@ -228,6 +228,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/skin_warming_wind/EPBL/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/skin_warming_wind/EPBL/MOM_parameter_doc.all index 73d2cf2b0..cee98c6e4 100644 --- a/ocean_only/CVmix_SCM_tests/skin_warming_wind/EPBL/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/skin_warming_wind/EPBL/MOM_parameter_doc.all @@ -240,6 +240,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/skin_warming_wind/KPP/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/skin_warming_wind/KPP/MOM_parameter_doc.all index ac3c89018..047d230bb 100644 --- a/ocean_only/CVmix_SCM_tests/skin_warming_wind/KPP/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/skin_warming_wind/KPP/MOM_parameter_doc.all @@ -240,6 +240,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/wind_only/BML/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/wind_only/BML/MOM_parameter_doc.all index 51fa1f98c..4a4e2543a 100644 --- a/ocean_only/CVmix_SCM_tests/wind_only/BML/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/wind_only/BML/MOM_parameter_doc.all @@ -228,6 +228,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/wind_only/EPBL/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/wind_only/EPBL/MOM_parameter_doc.all index ebc166dfd..e9aac6b60 100644 --- a/ocean_only/CVmix_SCM_tests/wind_only/EPBL/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/wind_only/EPBL/MOM_parameter_doc.all @@ -240,6 +240,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/CVmix_SCM_tests/wind_only/KPP/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/wind_only/KPP/MOM_parameter_doc.all index 7e34b2029..af76fb0a1 100644 --- a/ocean_only/CVmix_SCM_tests/wind_only/KPP/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/wind_only/KPP/MOM_parameter_doc.all @@ -240,6 +240,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/DOME/MOM_parameter_doc.all b/ocean_only/DOME/MOM_parameter_doc.all index 8d52fadf9..d66377c53 100644 --- a/ocean_only/DOME/MOM_parameter_doc.all +++ b/ocean_only/DOME/MOM_parameter_doc.all @@ -216,6 +216,9 @@ LENLON = 1500.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "DOME" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/Phillips_2layer/MOM_parameter_doc.all b/ocean_only/Phillips_2layer/MOM_parameter_doc.all index 5f38b2c34..f1b63a0f2 100644 --- a/ocean_only/Phillips_2layer/MOM_parameter_doc.all +++ b/ocean_only/Phillips_2layer/MOM_parameter_doc.all @@ -216,6 +216,9 @@ LENLON = 1200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/SCM_idealized_hurricane/MOM_parameter_doc.all b/ocean_only/SCM_idealized_hurricane/MOM_parameter_doc.all index d5ef21b36..dfa27035a 100644 --- a/ocean_only/SCM_idealized_hurricane/MOM_parameter_doc.all +++ b/ocean_only/SCM_idealized_hurricane/MOM_parameter_doc.all @@ -240,6 +240,9 @@ LENLON = 2.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/adjustment2d/layer/MOM_parameter_doc.all b/ocean_only/adjustment2d/layer/MOM_parameter_doc.all index ba20d0742..29d12facb 100644 --- a/ocean_only/adjustment2d/layer/MOM_parameter_doc.all +++ b/ocean_only/adjustment2d/layer/MOM_parameter_doc.all @@ -238,6 +238,9 @@ LENLON = 64.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/adjustment2d/rho/MOM_parameter_doc.all b/ocean_only/adjustment2d/rho/MOM_parameter_doc.all index 0254c2812..67935243f 100644 --- a/ocean_only/adjustment2d/rho/MOM_parameter_doc.all +++ b/ocean_only/adjustment2d/rho/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 64.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/adjustment2d/z/MOM_parameter_doc.all b/ocean_only/adjustment2d/z/MOM_parameter_doc.all index 7abcc0e05..a45868370 100644 --- a/ocean_only/adjustment2d/z/MOM_parameter_doc.all +++ b/ocean_only/adjustment2d/z/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 64.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/benchmark/MOM_parameter_doc.all b/ocean_only/benchmark/MOM_parameter_doc.all index 271938968..cc310bf4f 100644 --- a/ocean_only/benchmark/MOM_parameter_doc.all +++ b/ocean_only/benchmark/MOM_parameter_doc.all @@ -246,6 +246,9 @@ LAT_ENHANCE_FACTOR = 1.0 ! [nondim] default = 1.0 LAT_EQ_ENHANCE = 0.0 ! [degrees_N] default = 0.0 ! The latitude range to the north and south of the equator over which the ! resolution is enhanced. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "benchmark" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/circle_obcs/MOM_parameter_doc.all b/ocean_only/circle_obcs/MOM_parameter_doc.all index eacc391fe..f9dd75e5a 100644 --- a/ocean_only/circle_obcs/MOM_parameter_doc.all +++ b/ocean_only/circle_obcs/MOM_parameter_doc.all @@ -213,6 +213,9 @@ LENLON = 100.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/double_gyre/MOM_parameter_doc.all b/ocean_only/double_gyre/MOM_parameter_doc.all index 65d9dbd86..d258bf298 100644 --- a/ocean_only/double_gyre/MOM_parameter_doc.all +++ b/ocean_only/double_gyre/MOM_parameter_doc.all @@ -206,6 +206,9 @@ LENLON = 22.0 ! [degrees_E] ! The longitudinal length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "spoon" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/external_gwave/MOM_parameter_doc.all b/ocean_only/external_gwave/MOM_parameter_doc.all index c846c17c8..868726142 100644 --- a/ocean_only/external_gwave/MOM_parameter_doc.all +++ b/ocean_only/external_gwave/MOM_parameter_doc.all @@ -238,6 +238,9 @@ LENLON = 64.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/flow_downslope/layer/MOM_parameter_doc.all b/ocean_only/flow_downslope/layer/MOM_parameter_doc.all index cea38a26a..cb1dfc8e9 100644 --- a/ocean_only/flow_downslope/layer/MOM_parameter_doc.all +++ b/ocean_only/flow_downslope/layer/MOM_parameter_doc.all @@ -238,6 +238,9 @@ LENLON = 800.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "DOME2D" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/flow_downslope/rho/MOM_parameter_doc.all b/ocean_only/flow_downslope/rho/MOM_parameter_doc.all index ffec4fd5b..d8d85ad60 100644 --- a/ocean_only/flow_downslope/rho/MOM_parameter_doc.all +++ b/ocean_only/flow_downslope/rho/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 800.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "DOME2D" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/flow_downslope/sigma/MOM_parameter_doc.all b/ocean_only/flow_downslope/sigma/MOM_parameter_doc.all index badc2db06..61c48d1b0 100644 --- a/ocean_only/flow_downslope/sigma/MOM_parameter_doc.all +++ b/ocean_only/flow_downslope/sigma/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 800.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "DOME2D" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/flow_downslope/z/MOM_parameter_doc.all b/ocean_only/flow_downslope/z/MOM_parameter_doc.all index 2e26c8ac8..799974590 100644 --- a/ocean_only/flow_downslope/z/MOM_parameter_doc.all +++ b/ocean_only/flow_downslope/z/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 800.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "DOME2D" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/global_ALE/hycom/MOM_parameter_doc.all b/ocean_only/global_ALE/hycom/MOM_parameter_doc.all index 4b4071674..c34bc90b1 100644 --- a/ocean_only/global_ALE/hycom/MOM_parameter_doc.all +++ b/ocean_only/global_ALE/hycom/MOM_parameter_doc.all @@ -257,6 +257,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/global_ALE/layer/MOM_parameter_doc.all b/ocean_only/global_ALE/layer/MOM_parameter_doc.all index 01579c10c..690bb1d6c 100644 --- a/ocean_only/global_ALE/layer/MOM_parameter_doc.all +++ b/ocean_only/global_ALE/layer/MOM_parameter_doc.all @@ -245,6 +245,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/global_ALE/z/MOM_parameter_doc.all b/ocean_only/global_ALE/z/MOM_parameter_doc.all index 5bf7fea7f..4a87b0671 100644 --- a/ocean_only/global_ALE/z/MOM_parameter_doc.all +++ b/ocean_only/global_ALE/z/MOM_parameter_doc.all @@ -257,6 +257,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/lock_exchange/MOM_parameter_doc.all b/ocean_only/lock_exchange/MOM_parameter_doc.all index f80d32978..c3889e5f8 100644 --- a/ocean_only/lock_exchange/MOM_parameter_doc.all +++ b/ocean_only/lock_exchange/MOM_parameter_doc.all @@ -238,6 +238,9 @@ LENLON = 64.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/mixed_layer_restrat_2d/MOM_parameter_doc.all b/ocean_only/mixed_layer_restrat_2d/MOM_parameter_doc.all index d940fcc73..7ee1fa2bc 100644 --- a/ocean_only/mixed_layer_restrat_2d/MOM_parameter_doc.all +++ b/ocean_only/mixed_layer_restrat_2d/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 40.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/nonBous_global/MOM_parameter_doc.all b/ocean_only/nonBous_global/MOM_parameter_doc.all index 188666bb2..b68b2f158 100644 --- a/ocean_only/nonBous_global/MOM_parameter_doc.all +++ b/ocean_only/nonBous_global/MOM_parameter_doc.all @@ -230,6 +230,9 @@ USE_TRIPOLAR_GEOLONB_BUG = False ! [Boolean] default = False ! along the tripolar fold to be off by 360 degrees. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "file" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/resting/layer/MOM_parameter_doc.all b/ocean_only/resting/layer/MOM_parameter_doc.all index f7e196a46..880588937 100644 --- a/ocean_only/resting/layer/MOM_parameter_doc.all +++ b/ocean_only/resting/layer/MOM_parameter_doc.all @@ -238,6 +238,9 @@ LENLON = 200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/resting/z/MOM_parameter_doc.all b/ocean_only/resting/z/MOM_parameter_doc.all index 7c3ca1de8..fd8e8ea7b 100644 --- a/ocean_only/resting/z/MOM_parameter_doc.all +++ b/ocean_only/resting/z/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/seamount/layer/MOM_parameter_doc.all b/ocean_only/seamount/layer/MOM_parameter_doc.all index 856d81ff3..de4d67965 100644 --- a/ocean_only/seamount/layer/MOM_parameter_doc.all +++ b/ocean_only/seamount/layer/MOM_parameter_doc.all @@ -238,6 +238,9 @@ LENLON = 200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "seamount" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/seamount/rho/MOM_parameter_doc.all b/ocean_only/seamount/rho/MOM_parameter_doc.all index 6b749ce0b..e6b2a98e5 100644 --- a/ocean_only/seamount/rho/MOM_parameter_doc.all +++ b/ocean_only/seamount/rho/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "seamount" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/seamount/sigma/MOM_parameter_doc.all b/ocean_only/seamount/sigma/MOM_parameter_doc.all index 9dc687592..41a7c8092 100644 --- a/ocean_only/seamount/sigma/MOM_parameter_doc.all +++ b/ocean_only/seamount/sigma/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "seamount" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/seamount/z/MOM_parameter_doc.all b/ocean_only/seamount/z/MOM_parameter_doc.all index 5e68bf8ce..0739edbf9 100644 --- a/ocean_only/seamount/z/MOM_parameter_doc.all +++ b/ocean_only/seamount/z/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "seamount" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/single_column/BML/MOM_parameter_doc.all b/ocean_only/single_column/BML/MOM_parameter_doc.all index dbd3a0a60..5ca8259a0 100644 --- a/ocean_only/single_column/BML/MOM_parameter_doc.all +++ b/ocean_only/single_column/BML/MOM_parameter_doc.all @@ -228,6 +228,9 @@ LENLON = 1.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/single_column/EPBL/MOM_parameter_doc.all b/ocean_only/single_column/EPBL/MOM_parameter_doc.all index fccb975e7..8174e41f5 100644 --- a/ocean_only/single_column/EPBL/MOM_parameter_doc.all +++ b/ocean_only/single_column/EPBL/MOM_parameter_doc.all @@ -240,6 +240,9 @@ LENLON = 1.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/single_column/KPP/MOM_parameter_doc.all b/ocean_only/single_column/KPP/MOM_parameter_doc.all index 8952aa1a5..9b5e01ebe 100644 --- a/ocean_only/single_column/KPP/MOM_parameter_doc.all +++ b/ocean_only/single_column/KPP/MOM_parameter_doc.all @@ -240,6 +240,9 @@ LENLON = 1.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/sloshing/layer/MOM_parameter_doc.all b/ocean_only/sloshing/layer/MOM_parameter_doc.all index 4562b1993..65f81b74e 100644 --- a/ocean_only/sloshing/layer/MOM_parameter_doc.all +++ b/ocean_only/sloshing/layer/MOM_parameter_doc.all @@ -238,6 +238,9 @@ LENLON = 200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "sloshing" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/sloshing/rho/MOM_parameter_doc.all b/ocean_only/sloshing/rho/MOM_parameter_doc.all index 4e0dd5d47..8ffd8955c 100644 --- a/ocean_only/sloshing/rho/MOM_parameter_doc.all +++ b/ocean_only/sloshing/rho/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "sloshing" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/sloshing/z/MOM_parameter_doc.all b/ocean_only/sloshing/z/MOM_parameter_doc.all index c94a5a4d6..5b6439483 100644 --- a/ocean_only/sloshing/z/MOM_parameter_doc.all +++ b/ocean_only/sloshing/z/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "sloshing" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/torus_advection_test/MOM_parameter_doc.all b/ocean_only/torus_advection_test/MOM_parameter_doc.all index 20eb47461..aec2d80f9 100644 --- a/ocean_only/torus_advection_test/MOM_parameter_doc.all +++ b/ocean_only/torus_advection_test/MOM_parameter_doc.all @@ -238,6 +238,9 @@ LENLON = 172.8 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/tracer_mixing/rho/MOM_parameter_doc.all b/ocean_only/tracer_mixing/rho/MOM_parameter_doc.all index 00f5f3fe9..a2cad9a0a 100644 --- a/ocean_only/tracer_mixing/rho/MOM_parameter_doc.all +++ b/ocean_only/tracer_mixing/rho/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/tracer_mixing/z/MOM_parameter_doc.all b/ocean_only/tracer_mixing/z/MOM_parameter_doc.all index d89e83968..d9b7d3845 100644 --- a/ocean_only/tracer_mixing/z/MOM_parameter_doc.all +++ b/ocean_only/tracer_mixing/z/MOM_parameter_doc.all @@ -247,6 +247,9 @@ LENLON = 200.0 ! [km] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/ocean_only/unit_tests/MOM_parameter_doc.all b/ocean_only/unit_tests/MOM_parameter_doc.all index a73c6cea9..672ad9190 100644 --- a/ocean_only/unit_tests/MOM_parameter_doc.all +++ b/ocean_only/unit_tests/MOM_parameter_doc.all @@ -206,6 +206,9 @@ LENLON = 1.0 ! [degrees] ! The longitudinal or x-direction length of the domain. RAD_EARTH = 6.378E+06 ! [m] default = 6.378E+06 ! The radius of the Earth. +READ_MEAN_SEA_LEVEL = False ! [Boolean] default = False + ! If true, use a 2D map for time mean sea level, which is used to calculate time + ! mean ocean total thickness. TOPO_CONFIG = "flat" ! ! This specifies how bathymetry is specified: ! file - read bathymetric information from the file diff --git a/src/MOM6 b/src/MOM6 index d19d9176b..cbcc0123b 160000 --- a/src/MOM6 +++ b/src/MOM6 @@ -1 +1 @@ -Subproject commit d19d9176b609b91864805d52b73aafdfbe9c869a +Subproject commit cbcc0123b9e0d4a6bda147fd0df310041e1cee89