If you are using a released version of Kubernetes, you should refer to the docs that go with that version.
Documentation for other releases can be found at releases.k8s.io.
Author: Buddha Prakash (@dubstack), Vishnu Kannan (@vishh)
Last Updated: 06/23/2016
Status: Draft Proposal (WIP)
This document proposes a design for introducing pod level resource accounting to Kubernetes, and outlines the implementation and rollout plan.
- Pod level resource management in Kubelet
As of now Quality of Service(QoS) is not enforced at a pod level. Excepting pod evictions, all the other QoS features are not applicable at the pod level. To better support QoS, there is a need to add support for pod level resource accounting in Kubernetes.
We propose to have a unified cgroup hierarchy with pod level cgroups for better resource management. We will have a cgroup hierarchy with top level cgroups for the three QoS classes Guaranteed, Burstable and BestEffort. Pods (and their containers) belonging to a QoS class will be grouped under these top level QoS cgroups. And all containers in a pod are nested under the pod cgroup.
The proposed cgroup hierarchy would allow for more efficient resource management and lead to improvements in node reliability. This would also allow for significant latency optimizations in terms of pod eviction on nodes with the use of pod level resource usage metrics. This document provides a basic outline of how we plan to implement and rollout this feature.
- Pod level disk accounting will not be tackled in this proposal.
- Pod level resource specification in the Kubernetes API will not be tackled in this proposal.
Kubernetes currently supports container level isolation only and lets users specify resource requests/limits on the containers Compute Resources. The kubelet creates a cgroup sandbox (via it's container runtime) for each container.
There are a few shortcomings to the current model.
- Existing QoS support does not apply to pods as a whole. On-going work to support pod level eviction using QoS requires all containers in a pod to belong to the same class. By having pod level cgroups, it is easy to track pod level usage and make eviction decisions.
- Infrastructure overhead per pod is currently charged to the node. The overhead of setting up and managing the pod sandbox is currently accounted to the node. If the pod sandbox is a bit expensive, like in the case of hyper, having pod level accounting becomes critical.
- For the docker runtime we have a containerd-shim which is a small library that sits in front of a runtime implementation allowing it to be reparented to init, handle reattach from the caller etc. With pod level cgroups containerd-shim can be charged to the pod instead of the machine.
- If a container exits, all its anonymous pages (tmpfs) gets accounted to the machine (root). With pod level cgroups, that usage can also be attributed to the pod.
- Let containers share resources - with pod level limits, a pod with a Burstable container and a BestEffort container is classified as Burstable pod. The BestEffort container is able to consume slack resources not used by the Burstable container, and still be capped by the overall pod level limits.
High level requirements for the design are as follows:
- Do not break existing users. Ideally, there should be no changes to the Kubernetes API semantics.
- Support multiple cgroup managers - systemd, cgroupfs, etc.
How we intend to achieve these high level goals is covered in greater detail in the Implementation Plan.
We use the following denotations in the sections below:
For the three QoS classes
G⇒ Guaranteed QoS, Bu⇒ Burstable QoS, BE⇒ BestEffort QoS
For the value specified for the --qos-memory-overcommitment flag
qmo⇒ qos-memory-overcommitment
Currently the Kubelet highly prioritizes resource utilization and thus allows BE pods to use as much resources as they want. And in case of OOM the BE pods are first to be killed. We follow this policy as G pods often don't use the amount of resource request they specify. By overcommiting the node the BE pods are able to utilize these left over resources. And in case of OOM the BE pods are evicted by the eviciton manager. But there is some latency involved in the pod eviction process which can be a cause of concern in latency-sensitive servers. On such servers we would want to avoid OOM conditions on the node. Pod level cgroups allow us to restrict the amount of available resources to the BE pods. So reserving the requested resources for the G and Bu pods would allow us to avoid invoking the OOM killer.
We add a flag qos-memory-overcommitment to kubelet which would allow users to configure the percentage of memory overcommitment on the node. We have the default as 100, so by default we allow complete overcommitment on the node and let the BE pod use as much memory as it wants, and not reserve any resources for the G and Bu pods. As expected if there is an OOM in such a case we first kill the BE pods before the G and Bu pods.
On the other hand if a user wants to ensure very predictable tail latency for latency-sensitive servers he would need to set qos-memory-overcommitment to a really low value(preferrably 0). In this case memory resources would be reserved for the G and Bu pods and BE pods would be able to use only the left over memory resource.
Examples in the next section.
For the initial implementation we will only support limits for cpu and memory resources.
A pod can belong to one of the following 3 QoS classes: Guaranteed, Burstable, and BestEffort, in decreasing order of priority.
G pods will be placed at the $Root cgroup by default. $Root is the system root ie. "/" by default and if --cgroup-root flag is used then we use the specified cgroup-root as the $Root. To ensure Kubelet's idempotent behaviour we follow a pod cgroup naming format which is opaque and deterministic. Say we have a pod with UID: 5f9b19c9-3a30-11e6-8eea-28d2444e470d the pod cgroup PodUID would be named: pod-5f9b19c93a3011e6-8eea28d2444e470d.
Note: The cgroup-root flag would allow the user to configure the root of the QoS cgroup hierarchy. Hence cgroup-root would be redefined as the root of QoS cgroup hierarchy and not containers.
/PodUID/cpu.quota = cpu limit of Pod
/PodUID/cpu.shares = cpu request of Pod
/PodUID/memory.limit_in_bytes = memory limit of Pod
Example: We have two pods Pod1 and Pod2 having Pod Spec given below
kind: Pod
metadata:
name: Pod1
spec:
containers:
name: foo
resources:
limits:
cpu: 10m
memory: 1Gi
name: bar
resources:
limits:
cpu: 100m
memory: 2Gikind: Pod
metadata:
name: Pod2
spec:
containers:
name: foo
resources:
limits:
cpu: 20m
memory: 2GiiPod1 and Pod2 are both classified as G and are nested under the Root cgroup.
/Pod1/cpu.quota = 110m
/Pod1/cpu.shares = 110m
/Pod2/cpu.quota = 20m
/Pod2/cpu.shares = 20m
/Pod1/memory.limit_in_bytes = 3Gi
/Pod2/memory.limit_in_bytes = 2Gi
We have the following resource parameters for the Bu cgroup.
/Bu/cpu.shares = summation of cpu requests of all Bu pods
/Bu/PodUID/cpu.quota = Pod Cpu Limit
/Bu/PodUID/cpu.shares = Pod Cpu Request
/Bu/memory.limit_in_bytes = Allocatable - {(summation of memory requests/limits of `G` pods)*(1-qom/100)}
/Bu/PodUID/memory.limit_in_bytes = Pod memory limit
Note: For the Bu QoS when limits are not specified for any one of the containers, the Pod limit defaults to the node resource allocatable quantity.
Example: We have two pods Pod3 and Pod4 having Pod Spec given below:
kind: Pod
metadata:
name: Pod3
spec:
containers:
name: foo
resources:
limits:
cpu: 50m
memory: 2Gi
requests:
cpu: 20m
memory: 1Gi
name: bar
resources:
limits:
cpu: 100m
memory: 1Gikind: Pod
metadata:
name: Pod4
spec:
containers:
name: foo
resources:
limits:
cpu: 20m
memory: 2Gi
requests:
cpu: 10m
memory: 1Gi Pod3 and Pod4 are both classified as Bu and are hence nested under the Bu cgroup
And for qom = 0
/Bu/cpu.shares = 30m
/Bu/Pod3/cpu.quota = 150m
/Bu/Pod3/cpu.shares = 20m
/Bu/Pod4/cpu.quota = 20m
/Bu/Pod4/cpu.shares = 10m
/Bu/memory.limit_in_bytes = Allocatable - 5Gi
/Bu/Pod3/memory.limit_in_bytes = 3Gi
/Bu/Pod4/memory.limit_in_bytes = 2Gi
For pods belonging to the BE QoS we don't set any quota.
/BE/cpu.shares = 2
/BE/cpu.quota= not set
/BE/memory.limit_in_bytes = Allocatable - {(summation of memory requests of all `G` and `Bu` pods)*(1-qom/100)}
/BE/PodUID/memory.limit_in_bytes = no limit
Example: We have a pod 'Pod5' having Pod Spec given below:
kind: Pod
metadata:
name: Pod5
spec:
containers:
name: foo
resources:
name: bar
resources:Pod5 is classified as BE and is hence nested under the BE cgroup
And for qom = 0
/BE/cpu.shares = 2
/BE/cpu.quota= not set
/BE/memory.limit_in_bytes = Allocatable - 7Gi
/BE/Pod5/memory.limit_in_bytes = no limit
In systemd we have slices for the three top level QoS class. Further each pod is a subslice of exactly one of the three QoS slices. Each container in a pod belongs to a scope nested under the qosclass-pod slice.
Example: We plan to have the following cgroup hierarchy on systemd systems
/memory/G-PodUID.slice/containerUID.scope
/cpu,cpuacct/G-PodUID.slice/containerUID.scope
/memory/Bu.slice/Bu-PodUID.slice/containerUID.scope
/cpu,cpuacct/Bu.slice/Bu-PodUID.slice/containerUID.scope
/memory/BE.slice/BE-PodUID.slice/containerUID.scope
/cpu,cpuacct/BE.slice/BE-PodUID.slice/containerUID.scope
- "$Root" is the system root of the node ie. "/" by default and if
--cgroup-rootis specified then the specified cgroup-root is used as "$Root". - We have a top level QoS cgroup for the
BuandBEQoS classes. - But we dont have a separate cgroup for the
GQoS class.Gpod cgroups are brought up directly under theRootcgroup. - Each pod has its own cgroup which is nested under the cgroup matching the pod's QoS class.
- All containers brought up by the pod are nested under the pod's cgroup.
- system-reserved cgroup contains the system specific processes.
- kube-reserved cgroup contains the kubelet specific daemons.
$ROOT
|
+- Pod1
| |
| +- Container1
| +- Container2
| ...
+- Pod2
| +- Container3
| ...
+- ...
|
+- Bu
| |
| +- Pod3
| | |
| | +- Container4
| | ...
| +- Pod4
| | +- Container5
| | ...
| +- ...
|
+- BE
| |
| +- Pod5
| | |
| | +- Container6
| | +- Container7
| | ...
| +- ...
|
+- System-reserved
| |
| +- system
| +- docker (optional)
| +- ...
|
+- Kube-reserved
| |
| +- kubelet
| +- docker (optional)
| +- ...
|
- This hierarchy highly prioritizes resource guarantees to the
GoverBuandBEpods. - By not having a separate cgroup for the
Gclass, the hierarchy allows theGpods to burst and utilize all of Node's Allocatable capacity. - The
BEandBupods are strictly restricted from bursting and hogging resources and thusGPods are guaranteed resource isolation. BEpods are treated as lowest priority. So for theBEQoS cgroup we set cpu shares to the lowest possible value ie.2. This ensures that theBEcontainers get a relatively small share of cpu time.- Also we don't set any quota on the cpu resources as the containers on the
BEpods can use any amount of free resources on the node. - Having memory limit of
BEcgroup as (Allocatable - summation of memory requests ofGandBupods) would result inBEpods becoming more susceptible to being OOM killed. As moreGandBupods are scheduled kubelet will more likely killBEpods, even if theGandBupods are using less than their request since we will be dynamically reducing the size ofBEm.limit_in_bytes. But this allows for better memory guarantees to theGandBupods.
The implementation plan is outlined in the next sections. We will have a 'cgroups-per-qos' flag to specify if the user wants to use the QoS based cgroup hierarchy. The flag would be set to false by default at least in v1.4.
Two top level cgroups for Bu and BE QoS classes are created when Kubelet starts to run on a node. All G pods cgroups are by default nested under the Root. So we dont create a top level cgroup for the G class. For raw cgroup systems we would use libcontainers cgroups manager for general cgroup management(cgroup creation/destruction). But for systemd we don't have equivalent support for slice management in libcontainer yet. So we will be adding support for the same in the Kubelet. These cgroups are only created once on Kubelet initialization as a part of node setup. Also on systemd these cgroups are transient units and will not survive reboot.
- When a new pod is brought up, its QoS class is firstly determined.
- We add an interface to Kubelet’s ContainerManager to create and delete pod level cgroups under the cgroup that matches the pod’s QoS class.
- This interface will be pluggable. Kubelet will support both systemd and raw cgroups based cgroup drivers. We will be using the --cgroup-driver flag proposed in the Systemd Node Spec to specify the cgroup driver.
- We inject creation and deletion of pod level cgroups into the pod workers.
- As new pods are added QoS class cgroup parameters are updated to match the resource requests by the Pod.
Have docker manager create container cgroups under pod level cgroups. With the docker runtime, we will pass --cgroup-parent using the syntax expected for the corresponding cgroup-driver the runtime was configured to use.
We want to have rkt create pods under a root QoS class that kubelet specifies, and set pod level cgroup parameters mentioned in this proposal by itself.
Update Kubelet’s metrics provider to include Pod level metrics. Use cAdvisor's cgroup subsystem information to determine various Pod level usage metrics.
Note: Changes to cAdvisor might be necessary.
This feature will be opt-in in v1.4 and an opt-out in v1.5. We recommend users to drain their nodes and opt-in, before switching to v1.5, which will result in a no-op when v1.5 kubelet is rolled out.
The implementation goals of the first milestone are outlined below.
- Finalize and submit Pod Resource Management proposal for the project #26751
- Refactor qos package to be used globally throughout the codebase #27749 #28093
- Add interfaces for CgroupManager and CgroupManagerImpl which implements the CgroupManager interface and creates, destroys/updates cgroups using the libcontainer cgroupfs driver. #27755 #28566
- Inject top level QoS Cgroup creation in the Kubelet and add e2e tests to test that behaviour. #27853
- Add PodContainerManagerImpl Create and Destroy methods which implements the respective PodContainerManager methods using a cgroupfs driver. #28017
- Have docker manager create container cgroups under pod level cgroups. Inject creation and deletion of pod cgroups into the pod workers. Add e2e tests to test this behaviour. #29049
- Add support for updating policy for the pod cgroups. Add e2e tests to test this behaviour. #29087
- Enabling 'cgroup-per-qos' flag in Kubelet: The user is expected to drain the node and restart it before eenabling this feature, but as a fallback we also want to allow the user to just restart the kubelet with the cgroup-per-qos flag enabled to use this feature. As a part of this we need to figure out a policy for pods having Restart Policy: Never. More details in this issue.
- Removing terminated pod's Cgroup : We need to cleanup the pod's cgroup once the pod is terminated. More details in this issue.
- Kubelet needs to ensure that the cgroup settings are what the kubelet expects them to be. If security is not of concern, one can assume that once kubelet applies cgroups setting successfully, the values will never change unless kubelet changes it. If security is of concern, then kubelet will have to ensure that the cgroup values meet its requirements and then continue to watch for updates to cgroups via inotify and re-apply cgroup values if necessary. Updating QoS limits needs to happen before pod cgroups values are updated. When pod cgroups are being deleted, QoS limits have to be updated after pod cgroup values have been updated for deletion or pod cgroups have been removed. Given that kubelet doesn't have any checkpoints and updates to QoS and pod cgroups are not atomic, kubelet needs to reconcile cgroups status whenever it restarts to ensure that the cgroups values match kubelet's expectation.
- [TEST] Opting in for this feature and rollbacks should be accompanied by detailed error message when killing pod intermittently.
- Add a systemd implementation for Cgroup Manager interface
Other smaller work items that we would be good to have before the release of this feature.
- Add Pod UID to the downward api which will help simplify the e2e testing logic.
- Check if parent cgroup exist and error out if they don’t.
- Set top level cgroup limit to resource allocatable until we support QoS level cgroup updates. If cgroup root is not
/then set node resource allocatable as the cgroup resource limits on cgroup root. - Add a NodeResourceAllocatableProvider which returns the amount of allocatable resources on the nodes. This interface would be used both by the Kubelet and ContainerManager.
- Add top level feasibility check to ensure that pod can be admitted on the node by estimating left over resources on the node.
- Log basic cgroup management ie. creation/deletion metrics
To better support our requirements we needed to make some changes/add features to Libcontainer as well
- Allowing or denying all devices by writing 'a' to devices.allow or devices.deny is not possible once the device cgroups has children. Libcontainer doesn’t have the option of skipping updates on parent devices cgroup. opencontainers/runc/pull/958
- To use libcontainer for creating and managing cgroups in the Kubelet, I would like to just create a cgroup with no pid attached and if need be apply a pid to the cgroup later on. But libcontainer did not support cgroup creation without attaching a pid. opencontainers/runc/pull/956