diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 955110dfd5e3..f8c74b23d9bf 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -416,7 +416,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index a9d497e3820a..f6968b0937a7 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -416,7 +416,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index d1204fc63048..8704e8a6d371 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -416,7 +416,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h
index 86ea0fc565a4..acca56e8a099 100644
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@@ -416,7 +416,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
index cae694698338..7296adff5c96 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@@ -417,7 +417,7 @@
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 #define DIGIPOT_MOTOR_CURRENT {150, 170, 180, 190, 180} // Values 0-255 (bq ZUM Mega 3D (default): X = 150 [~1.17A]; Y = 170 [~1.33A]; Z = 180 [~1.41A]; E0 = 190 [~1.49A])
 
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h
index 734e4c661441..c95d3fb0b391 100644
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@@ -429,7 +429,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/K8400/Configuration_adv.h b/Marlin/example_configurations/K8400/Configuration_adv.h
index 06f214726e19..23173f052b22 100644
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@@ -416,7 +416,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 420b7b8dad69..c62c89016065 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -416,7 +416,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 22f7ca0755b7..b369d11f8c2e 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -416,7 +416,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h
index 3fee26733d6b..77d38b5ea7b0 100644
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@@ -424,7 +424,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h
index 86ea0fc565a4..acca56e8a099 100644
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@@ -416,7 +416,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
index 9982b7d38d20..9011737f25f6 100644
--- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
@@ -418,7 +418,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 954c6de6e61d..60eb8636b335 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -418,7 +418,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 954c6de6e61d..60eb8636b335 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -418,7 +418,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 9a6cf9f38c8f..595b1473e9ab 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -423,7 +423,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index a51d824c223f..28c62a17b4f2 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -418,7 +418,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 4dd929522e72..1a7b2def0773 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -416,7 +416,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 3efc63760eeb..9c01fc3312ee 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -416,7 +416,7 @@
  */
 //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
-//#define DAC_STEPPER_DFLT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
 
 /*  5DPRINT & AZTEEG_X3_PRO */
 //#define DIGIPOT_I2C  // uncomment to enable