; ### Marlin K-Factor Calibration Pattern ###
; -------------------------------------------
;
; Printer: NaN mm
; Filament: NaN mm
; Created: Mon Dec 02 2019 15:06:54 GMT+0000 (Greenwich Mean Time)
;
; Settings Printer:
; Filament Diameter = 1.75 mm
; Nozzle Diameter = 0.4 mm
; Nozzle Temperature = 215 °C
; Bed Temperature = 45 °C
; Retraction Distance = 6 mm
; Layer Height = 0.2 mm
; Z-axis Offset = 0 mm
;
; Settings Print Bed:
; Bed Shape = Rect
; Bed Size X = 220 mm
; Bed Size Y = 199 mm
; Origin Bed Center = false
;
; Settings Speed:
; Slow Printing Speed = 1200 mm/min
; Fast Printing Speed = 4200 mm/min
; Movement Speed = 10500 mm/min
; Retract Speed = 2400 mm/min
; Printing Acceleration = 500 mm/s^2
; Jerk X-axis =  firmware default
; Jerk Y-axis =  firmware default
; Jerk Z-axis =  firmware default
; Jerk Extruder =  firmware default
;
; Settings Pattern:
; Linear Advance Version = 1.5
; Starting Value Factor = 0
; Ending Value Factor = 2
; Factor Stepping = 0.2
; Test Line Spacing = 5 mm
; Test Line Length Slow = 20 mm
; Test Line Length Fast = 40 mm
; Print Pattern = Standard
; Print Frame = false
; Number Lines = true
; Print Size X = 98 mm
; Print Size Y = 75 mm
; Print Rotation = 0 degree
;
; Settings Advance:
; Nozzle / Line Ratio = 1.1
; Bed leveling = G29
; Use FWRETRACT = false
; Extrusion Multiplier = 0.9887
; Prime Nozzle = true
; Prime Extrusion Multiplier = 2
; Prime Speed = 1800
; Dwell Time = 2 s
;
; prepare printing
;
M104 S215 ; set nozzle temperature but do not wait
M190 S45 ; set bed temperature and wait
M109 S215 ; block waiting for nozzle temp
G28 ; home all axes with heated bed
G29; Activate bed leveling compensation
G21 ; set units to millimeters
M204 P500 ; set acceleration
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
G92 E0 ; reset extruder distance
;
; prime nozzle
;
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G1 E-6 F2400 ; retract
;
; start the Test pattern
;
G4 P2000 ; Pause (dwell) for 2 seconds
G1 X71 Y62 F10500 ; move to start
G1 Z0.2 F1200 ; move to layer height
M900 K0 ; set K-factor
M117 K0 ; 
G1 E6 F2400 ; un-retract
G1 X91 Y62 E0.7235 F1200 ; print line
G1 X131 Y62 E1.4469 F4200 ; print line
G1 X151 Y62 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X71 Y67 F10500 ; move to start
M900 K0.2 ; set K-factor
M117 K0.2 ; 
G1 E6 F2400 ; un-retract
G1 X91 Y67 E0.7235 F1200 ; print line
G1 X131 Y67 E1.4469 F4200 ; print line
G1 X151 Y67 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X71 Y72 F10500 ; move to start
M900 K0.4 ; set K-factor
M117 K0.4 ; 
G1 E6 F2400 ; un-retract
G1 X91 Y72 E0.7235 F1200 ; print line
G1 X131 Y72 E1.4469 F4200 ; print line
G1 X151 Y72 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X71 Y77 F10500 ; move to start
M900 K0.6 ; set K-factor
M117 K0.6 ; 
G1 E6 F2400 ; un-retract
G1 X91 Y77 E0.7235 F1200 ; print line
G1 X131 Y77 E1.4469 F4200 ; print line
G1 X151 Y77 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X71 Y82 F10500 ; move to start
M900 K0.8 ; set K-factor
M117 K0.8 ; 
G1 E6 F2400 ; un-retract
G1 X91 Y82 E0.7235 F1200 ; print line
G1 X131 Y82 E1.4469 F4200 ; print line
G1 X151 Y82 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X71 Y87 F10500 ; move to start
M900 K1 ; set K-factor
M117 K1 ; 
G1 E6 F2400 ; un-retract
G1 X91 Y87 E0.7235 F1200 ; print line
G1 X131 Y87 E1.4469 F4200 ; print line
G1 X151 Y87 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X71 Y92 F10500 ; move to start
M900 K1.2 ; set K-factor
M117 K1.2 ; 
G1 E6 F2400 ; un-retract
G1 X91 Y92 E0.7235 F1200 ; print line
G1 X131 Y92 E1.4469 F4200 ; print line
G1 X151 Y92 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X71 Y97 F10500 ; move to start
M900 K1.4 ; set K-factor
M117 K1.4 ; 
G1 E6 F2400 ; un-retract
G1 X91 Y97 E0.7235 F1200 ; print line
G1 X131 Y97 E1.4469 F4200 ; print line
G1 X151 Y97 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X71 Y102 F10500 ; move to start
M900 K1.6 ; set K-factor
M117 K1.6 ; 
G1 E6 F2400 ; un-retract
G1 X91 Y102 E0.7235 F1200 ; print line
G1 X131 Y102 E1.4469 F4200 ; print line
G1 X151 Y102 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X71 Y107 F10500 ; move to start
M900 K1.8 ; set K-factor
M117 K1.8 ; 
G1 E6 F2400 ; un-retract
G1 X91 Y107 E0.7235 F1200 ; print line
G1 X131 Y107 E1.4469 F4200 ; print line
G1 X151 Y107 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X71 Y112 F10500 ; move to start
M900 K2 ; set K-factor
M117 K2 ; 
G1 E6 F2400 ; un-retract
G1 X91 Y112 E0.7235 F1200 ; print line
G1 X131 Y112 E1.4469 F4200 ; print line
G1 X151 Y112 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X71 Y117 F10500 ; move to start
;
; mark the test area for reference
M117 K0 ;
M900 K0 ; set K-factor 0
G1 X91 Y117 F10500 ; move to start
G1 E6 F2400 ; un-retract
G1 X91 Y137 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 X131 Y117 F10500 ; move to start
G1 E6 F2400 ; un-retract
G1 X131 Y137 E0.7235 F1200 ; print line
G1 E-6 F2400 ; retract
G1 Z0.3 F1200 ; zHop
;
; print K-values
;
G1 X153 Y60 F10500 ; move to start
G1 Z0.2 F1200 ; zHop
G1 E6 F2400 ; un-retract
G1 X155 Y60 E0.0723 F1200 ; 0
G1 X155 Y62 E0.0723 F1200 ; 0
G1 X155 Y64 E0.0723 F1200 ; 0
G1 X153 Y64 E0.0723 F1200 ; 0
G1 X153 Y62 E0.0723 F1200 ; 0
G1 X153 Y60 E0.0723 F1200 ; 0
G1 E-6 F2400 ; retract
G1 Z0.3 F1200 ; zHop
G1 X153 Y70 F10500 ; move to start
G1 Z0.2 F1200 ; zHop
G1 E6 F2400 ; un-retract
G1 X155 Y70 E0.0723 F1200 ; 0
G1 X155 Y72 E0.0723 F1200 ; 0
G1 X155 Y74 E0.0723 F1200 ; 0
G1 X153 Y74 E0.0723 F1200 ; 0
G1 X153 Y72 E0.0723 F1200 ; 0
G1 X153 Y70 E0.0723 F1200 ; 0
G1 E-6 F2400 ; retract
G1 X156 Y70 F10500 ; move to start
G1 E6 F2400 ; un-retract
G1 X156 Y70.4 E0.0145 F1200 ; dot
G1 E-6 F2400 ; retract
G1 X157 Y70 F10500 ; move to start
G1 E6 F2400 ; un-retract
G1 X157 Y72 F10500 ; move to start
G1 X157 Y74 F10500 ; move to start
G1 X157 Y72 E0.0723 F1200 ; 4
G1 X159 Y72 E0.0723 F1200 ; 4
G1 X159 Y74 F10500 ; move to start
G1 X159 Y72 E0.0723 F1200 ; 4
G1 X159 Y70 E0.0723 F1200 ; 4
G1 E-6 F2400 ; retract
G1 Z0.3 F1200 ; zHop
G1 X153 Y80 F10500 ; move to start
G1 Z0.2 F1200 ; zHop
G1 E6 F2400 ; un-retract
G1 X155 Y80 E0.0723 F1200 ; 0
G1 X155 Y82 E0.0723 F1200 ; 0
G1 X155 Y84 E0.0723 F1200 ; 0
G1 X153 Y84 E0.0723 F1200 ; 0
G1 X153 Y82 E0.0723 F1200 ; 0
G1 X153 Y80 E0.0723 F1200 ; 0
G1 E-6 F2400 ; retract
G1 X156 Y80 F10500 ; move to start
G1 E6 F2400 ; un-retract
G1 X156 Y80.4 E0.0145 F1200 ; dot
G1 E-6 F2400 ; retract
G1 X157 Y80 F10500 ; move to start
G1 E6 F2400 ; un-retract
G1 X157 Y82 F10500 ; move to start
G1 X159 Y82 E0.0723 F1200 ; 8
G1 X159 Y80 E0.0723 F1200 ; 8
G1 X157 Y80 E0.0723 F1200 ; 8
G1 X157 Y82 E0.0723 F1200 ; 8
G1 X157 Y84 E0.0723 F1200 ; 8
G1 X159 Y84 E0.0723 F1200 ; 8
G1 X159 Y82 E0.0723 F1200 ; 8
G1 E-6 F2400 ; retract
G1 Z0.3 F1200 ; zHop
G1 X153 Y90 F10500 ; move to start
G1 Z0.2 F1200 ; zHop
G1 E6 F2400 ; un-retract
G1 X153 Y92 E0.0723 F1200 ; 1
G1 X153 Y94 E0.0723 F1200 ; 1
G1 E-6 F2400 ; retract
G1 X154 Y90 F10500 ; move to start
G1 E6 F2400 ; un-retract
G1 X154 Y90.4 E0.0145 F1200 ; dot
G1 E-6 F2400 ; retract
G1 X155 Y90 F10500 ; move to start
G1 E6 F2400 ; un-retract
G1 X155 Y92 F10500 ; move to start
G1 X155 Y94 F10500 ; move to start
G1 X157 Y94 E0.0723 F1200 ; 2
G1 X157 Y92 E0.0723 F1200 ; 2
G1 X155 Y92 E0.0723 F1200 ; 2
G1 X155 Y90 E0.0723 F1200 ; 2
G1 X157 Y90 E0.0723 F1200 ; 2
G1 E-6 F2400 ; retract
G1 Z0.3 F1200 ; zHop
G1 X153 Y100 F10500 ; move to start
G1 Z0.2 F1200 ; zHop
G1 E6 F2400 ; un-retract
G1 X153 Y102 E0.0723 F1200 ; 1
G1 X153 Y104 E0.0723 F1200 ; 1
G1 E-6 F2400 ; retract
G1 X154 Y100 F10500 ; move to start
G1 E6 F2400 ; un-retract
G1 X154 Y100.4 E0.0145 F1200 ; dot
G1 E-6 F2400 ; retract
G1 X155 Y100 F10500 ; move to start
G1 E6 F2400 ; un-retract
G1 X155 Y102 F10500 ; move to start
G1 X157 Y102 E0.0723 F1200 ; 6
G1 X157 Y100 E0.0723 F1200 ; 6
G1 X155 Y100 E0.0723 F1200 ; 6
G1 X155 Y102 E0.0723 F1200 ; 6
G1 X155 Y104 E0.0723 F1200 ; 6
G1 X157 Y104 E0.0723 F1200 ; 6
G1 E-6 F2400 ; retract
G1 Z0.3 F1200 ; zHop
G1 X153 Y110 F10500 ; move to start
G1 Z0.2 F1200 ; zHop
G1 E6 F2400 ; un-retract
G1 X153 Y112 F10500 ; move to start
G1 X153 Y114 F10500 ; move to start
G1 X155 Y114 E0.0723 F1200 ; 2
G1 X155 Y112 E0.0723 F1200 ; 2
G1 X153 Y112 E0.0723 F1200 ; 2
G1 X153 Y110 E0.0723 F1200 ; 2
G1 X155 Y110 E0.0723 F1200 ; 2
G1 E-6 F2400 ; retract
G1 Z0.3 F1200 ; zHop
;
; finish
;
M104 S0 ; turn off hotend
M140 S0 ; turn off bed
G1 Z30 X220 Y199 F10500 ; move away from the print
M84 ; disable motors
M502 ; resets parameters from ROM
M501 ; resets parameters from EEPROM
;