.. index:: single: Cache
The nature of rich web applications means that they're dynamic. No matter how efficient your application, each request will always contain more overhead than serving a static file. Usually, that's fine. But when you need your requests to be lightning fast, you need HTTP caching.
With HTTP Caching, you cache the full output of a page (i.e. the response) and bypass your application entirely on subsequent requests. Caching entire responses isn't always possible for highly dynamic sites, or is it? With :doc:`Edge Side Includes (ESI) </http_cache/esi>`, you can use the power of HTTP caching on only fragments of your site.
The Symfony cache system is different because it relies on the simplicity and power of the HTTP cache as defined in RFC 7234 - Caching. Instead of reinventing a caching methodology, Symfony embraces the standard that defines basic communication on the Web. Once you understand the fundamental HTTP validation and expiration caching models, you'll be ready to master the Symfony cache system.
Since caching with HTTP isn't unique to Symfony, many articles already exist on the topic. If you're new to HTTP caching, Ryan Tomayko's article Things Caches Do is highly recommended. Another in-depth resource is Mark Nottingham's Cache Tutorial.
.. index:: single: Cache; Proxy single: Cache; Reverse proxy
When caching with HTTP, the cache is separated from your application entirely and sits between your application and the client making the request.
The job of the cache is to accept requests from the client and pass them back to your application. The cache will also receive responses back from your application and forward them on to the client. The cache is the "middle-man" of the request-response communication between the client and your application.
Along the way, the cache will store each response that is deemed "cacheable" (See :ref:`http-cache-introduction`). If the same resource is requested again, the cache sends the cached response to the client, ignoring your application entirely.
This type of cache is known as an HTTP gateway cache and many exist such as Varnish, Squid in reverse proxy mode, and the Symfony reverse proxy.
Tip
Gateway caches are sometimes referred to as reverse proxy caches, surrogate caches, or even HTTP accelerators.
.. index:: single: Cache; Symfony reverse proxy
Symfony comes with a reverse proxy (i.e. gateway cache) written in PHP. :ref:`It's not a fully-featured reverse proxy cache like Varnish <http-cache-symfony-versus-varnish>`, but is a great way to start.
Tip
For details on setting up Varnish, see :doc:`/http_cache/varnish`.
To enable the proxy, first create a caching kernel:
// src/CacheKernel.php
namespace App;
use Symfony\Bundle\FrameworkBundle\HttpCache\HttpCache;
class CacheKernel extends HttpCache
{
}
Modify the code of your front controller to wrap the default kernel into the caching kernel:
// public/index.php
+ use App\CacheKernel;
use App\Kernel;
// ...
$kernel = new Kernel($_SERVER['APP_ENV'], (bool) $_SERVER['APP_DEBUG']);
+ // Wrap the default Kernel with the CacheKernel one in 'prod' environment
+ if ('prod' === $kernel->getEnvironment()) {
+ $kernel = new CacheKernel($kernel);
+ }
$request = Request::createFromGlobals();
// ...The caching kernel will immediately act as a reverse proxy: caching responses from your application and returning them to the client.
Caution!
If you're using the :ref:`framework.http_method_override <configuration-framework-http_method_override>`
option to read the HTTP method from a _method parameter, see the
above link for a tweak you need to make.
Tip
The cache kernel has a special getLog() method that returns a string
representation of what happened in the cache layer. In the development
environment, use it to debug and validate your cache strategy:
error_log($kernel->getLog());
The CacheKernel object has a sensible default configuration, but it can be
finely tuned via a set of options you can set by overriding the
:method:`Symfony\\Bundle\\FrameworkBundle\\HttpCache\\HttpCache::getOptions`
method:
// src/CacheKernel.php
namespace App;
use Symfony\Bundle\FrameworkBundle\HttpCache\HttpCache;
class CacheKernel extends HttpCache
{
protected function getOptions(): array
{
return [
'default_ttl' => 0,
// ...
];
}
}
For a full list of the options and their meaning, see the :method:`HttpCache::__construct() documentation <Symfony\\Component\\HttpKernel\\HttpCache\\HttpCache::__construct>`.
When you're in debug mode (the second argument of Kernel constructor in the
front controller is true), Symfony automatically adds an X-Symfony-Cache
header to the response. You can also use the trace_level config
option and set it to either none, short or full to
add this information.
short will add the information for the main request only.
It's written in a concise way that makes it easy to record the
information in your server log files. For example, in Apache you can
use %{X-Symfony-Cache}o in LogFormat format statements.
This information can be used to extract general information about
cache efficiency of your routes.
Tip
You can change the name of the header used for the trace
information using the trace_header config option.
Changing from one Reverse Proxy to another
The Symfony reverse proxy is a great tool to use when developing your website or when you deploy your website to a shared host where you cannot install anything beyond PHP code. But being written in PHP, it cannot be as fast as a proxy written in C.
Fortunately, since all reverse proxies are effectively the same, you should be able to switch to something more robust - like Varnish - without any problems. See :doc:`How to use Varnish </http_cache/varnish>`
.. index:: single: Cache; HTTP
Once you've added a reverse proxy cache (e.g. like the Symfony reverse proxy or Varnish), you're ready to cache your responses. To do that, you need to communicate to your cache which responses are cacheable and for how long. This is done by setting HTTP cache headers on the response.
HTTP specifies four response cache headers that you can set to enable caching:
Cache-ControlExpiresETagLast-Modified
These four headers are used to help cache your responses via two different models:
- :ref:`Expiration Caching <http-cache-expiration-intro>` Used to cache your entire response for a specific amount of time (e.g. 24 hours). Simple, but cache invalidation is more difficult.
- :ref:`Validation Caching <http-cache-validation-intro>` More complex: used to cache your response, but allows you to dynamically invalidate it as soon as your content changes.
Reading the HTTP Specification
All of the HTTP headers you'll read about are not invented by Symfony! They're part of an HTTP specification that's used by sites all over the web. To dig deeper into HTTP Caching, check out the documents RFC 7234 - Caching and RFC 7232 - Conditional Requests.
As a web developer, you are strongly urged to read the specification. Its clarity and power - even more than fifteen years after its creation - is invaluable. Don't be put-off by the appearance of the spec - its contents are much more beautiful than its cover!
.. index:: single: Cache; Expiration
The easiest way to cache a response is by caching it for a specific amount of time:
// src/Controller/BlogController.php
use Symfony\Component\HttpFoundation\Response;
// ...
public function index()
{
// somehow create a Response object, like by rendering a template
$response = $this->render('blog/index.html.twig', []);
// cache publicly for 3600 seconds
$response->setPublic();
$response->setMaxAge(3600);
// (optional) set a custom Cache-Control directive
$response->headers->addCacheControlDirective('must-revalidate', true);
return $response;
}
Thanks to this new code, your HTTP response will have the following header:
Cache-Control: public, maxage=3600, must-revalidate
This tells your HTTP reverse proxy to cache this response for 3600 seconds. If anyone
requests this URL again before 3600 seconds, your application won't be hit at all.
If you're using the Symfony reverse proxy, look at the X-Symfony-Cache header
for debugging information about cache hits and misses.
Tip
The URI of the request is used as the cache key (unless you :doc:`vary </http_cache/cache_vary>`).
This provides great performance and is simple to use. But, cache invalidation is not supported. If your content change, you'll need to wait until your cache expires for the page to update.
Tip
Actually, you can manually invalidate your cache, but it's not part of the HTTP Caching spec. See :ref:`http-cache-invalidation`.
If you need to set cache headers for many different controller actions, check out FOSHttpCacheBundle. It provides a way to define cache headers based on the URL pattern and other request properties.
Finally, for more information about expiration caching, see :doc:`/http_cache/expiration`.
.. index:: single: Cache; Cache-Control header single: HTTP headers; Cache-Control
With expiration caching, you say "cache for 3600 seconds!". But, when someone updates cached content, you won't see that content on your site until the cache expires.
If you need to see updated content immediately, you either need to :ref:`invalidate <http-cache-invalidation>` your cache or use the validation caching model.
For details, see :doc:`/http_cache/validation`.
.. index:: single: Cache; Safe methods
HTTP caching only works for "safe" HTTP methods (like GET and HEAD). This means three things:
- Don't try to cache PUT or DELETE requests. It won't work and with good reason. These methods are meant to be used when mutating the state of your application (e.g. deleting a blog post). Caching them would prevent certain requests from hitting and mutating your application.
- POST requests are generally considered uncacheable, but they can be cached when they include explicit freshness information. However, POST caching is not widely implemented, so you should avoid it if possible.
- You should never change the state of your application (e.g. update a blog post) when responding to a GET or HEAD request. If those requests are cached, future requests may not actually hit your server.
.. index:: pair: Cache; Configuration
The Response class provides many more methods related to the cache. Here are the most useful ones:
// marks the Response stale $response->expire(); // forces the response to return a proper 304 response with no content $response->setNotModified();
Additionally, most cache-related HTTP headers can be set via the single :method:`Symfony\\Component\\HttpFoundation\\Response::setCache` method:
// use this method to set several cache settings in one call
// (this example lists all the available cache settings)
$response->setCache([
'must_revalidate' => false,
'no_cache' => false,
'no_store' => false,
'no_transform' => false,
'public' => true,
'private' => false,
'proxy_revalidate' => false,
'max_age' => 600,
's_maxage' => 600,
'immutable' => true,
'last_modified' => new \DateTime(),
'etag' => 'abcdef'
]);
.. versionadded:: 5.1
The ``must_revalidate``, ``no_cache``, ``no_store``, ``no_transform`` and
``proxy_revalidate`` directives were introduced in Symfony 5.1.
Cache invalidation is not part of the HTTP specification. Still, it can be really useful to delete various HTTP cache entries as soon as some content on your site is updated.
For details, see :doc:`/http_cache/cache_invalidation`.
When pages contain dynamic parts, you may not be able to cache entire pages, but only parts of it. Read :doc:`/http_cache/esi` to find out how to configure different cache strategies for specific parts of your page.
Whenever the session is started during a request, Symfony turns the response into a private non-cacheable response. This is the best default behavior to not cache private user information (e.g. a shopping cart, a user profile details, etc.) and expose it to other visitors.
However, even requests making use of the session can be cached under some circumstances. For example, information related to some user group could be cached for all the users belonging to that group. Handling these advanced caching scenarios is out of the scope of Symfony, but they can be solved with the FOSHttpCacheBundle.
In order to disable the default Symfony behavior that makes requests using the session uncacheable, add the following internal header to your response and Symfony won't modify it:
use Symfony\Component\HttpKernel\EventListener\AbstractSessionListener; $response->headers->set(AbstractSessionListener::NO_AUTO_CACHE_CONTROL_HEADER, 'true');
Symfony was designed to follow the proven rules of the road: HTTP. Caching is no exception. Mastering the Symfony cache system means becoming familiar with the HTTP cache models and using them effectively. This means that, instead of relying only on Symfony documentation and code examples, you have access to a world of knowledge related to HTTP caching and gateway caches such as Varnish.
.. toctree::
:maxdepth: 1
:glob:
http_cache/*