init.lua

vim.loader.enable()

-- Set <space> as the leader key
-- See `:help mapleader`
--  NOTE: Must happen before plugins are required (otherwise wrong leader will be used)
vim.g.mapleader = ' '
vim.g.maplocalleader = ' '

-- [[ Setting options ]]
-- See `:help vim.o`
-- NOTE: You can change these options as you wish!

-- Set highlight on search
vim.o.hlsearch = false

-- Make line numbers default
vim.wo.number = true
vim.wo.relativenumber = true

-- Enable mouse mode
vim.o.mouse = 'a'

-- Sync clipboard between OS and Neovim.
--  Remove this option if you want your OS clipboard to remain independent.
--  See `:help 'clipboard'`
vim.o.clipboard = 'unnamedplus'

-- Enable break indent
vim.o.breakindent = true

-- Save undo history
vim.o.undofile = true

-- Case-insensitive searching UNLESS \C or capital in search
vim.o.ignorecase = true
vim.o.smartcase = true

-- Keep signcolumn on by default
vim.wo.signcolumn = 'yes'

-- Decrease update time
vim.o.updatetime = 250
vim.o.timeoutlen = 300

-- Set completeopt to have a better completion experience
vim.o.completeopt = 'menuone,noselect'

-- NOTE: You should make sure your terminal supports this
vim.o.termguicolors = true

-- Blocky cursor
vim.opt.guicursor = ''

-- Intuitive window splitting
vim.opt.splitright = true
vim.opt.splitbelow = true

-- Enable colorcolumn
vim.wo.colorcolumn = '80'

-- Clean up Netrw
vim.g.netrw_browse_split = 0
vim.g.netrw_banner = 0
vim.g.netrw_winsize = 25

-- Folding
vim.o.foldmethod = 'expr' -- use treesitter for folding
vim.o.foldexpr = 'nvim_treesitter#foldexpr()'
vim.o.foldlevel = 99 -- Open folds by default

-- [[ Basic Keymaps ]]

-- Keymaps for better default experience
-- See `:help vim.keymap.set()`
vim.keymap.set({ 'n', 'v' }, '<Space>', '<Nop>', { silent = true })

-- Center cursor when scrolling
vim.keymap.set('n', 'n', 'nzzzv', { silent = true })
vim.keymap.set('n', 'N', 'Nzzzv', { silent = true })
vim.keymap.set('n', '<C-d>', '<C-d>zz', { silent = true })
vim.keymap.set('n', '<C-u>', '<C-u>zz', { silent = true })

-- Remap for dealing with word wrap
vim.keymap.set('n', 'k', "v:count == 0 ? 'gk' : 'k'", { expr = true, silent = true })
vim.keymap.set('n', 'j', "v:count == 0 ? 'gj' : 'j'", { expr = true, silent = true })

-- Diagnostic keymaps
vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous diagnostic message' })
vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next diagnostic message' })
vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Open floating diagnostic message' })
vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostics list' })

vim.keymap.set('n', '<leader>o', '<CMD>setlocal spell! spelllang=en_au<CR>', { desc = 'Spell-check' })

-- [[ Highlight on yank ]]
-- See `:help vim.highlight.on_yank()`
local highlight_group = vim.api.nvim_create_augroup('YankHighlight', { clear = true })
vim.api.nvim_create_autocmd('TextYankPost', {
  callback = function()
    vim.highlight.on_yank()
  end,
  group = highlight_group,
  pattern = '*',
})

-- Disable continuous comments on new line
vim.api.nvim_create_autocmd('FileType', {
  command = [[setlocal formatoptions-=c formatoptions-=r formatoptions-=o]],
  pattern = '*',
})

-- [[ Install `lazy.nvim` plugin manager ]]
--    https://github.com/folke/lazy.nvim
--    `:help lazy.nvim.txt` for more info
local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
if not vim.loop.fs_stat(lazypath) then
  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
end
vim.opt.rtp:prepend(lazypath)

-- [[ Configure plugins ]]
-- NOTE: Here is where you install your plugins.
--  You can configure plugins using the `config` key.
--
--  You can also configure plugins after the setup call,
--    as they will be available in your neovim runtime.
require('lazy').setup({
  -- NOTE: First, some plugins that don't require any configuration

  -- Detect tabstop and shiftwidth automatically
  'tpope/vim-sleuth',

  { -- Useful plugin to show you pending keybinds.
    'folke/which-key.nvim',
    event = 'VeryLazy',
    config = function()
      require('which-key').setup()

      -- Document existing key chains
      require('which-key').register {
        ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' },
        ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' },
        ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' },
        ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' },
        ['<leader>w'] = { name = '[W]orkspace', _ = 'which_key_ignore' },
      }
    end,
  },

  { -- Adds git related signs to the gutter, as well as utilities for managing changes
    'lewis6991/gitsigns.nvim',
    opts = {
      signs = {
        add = { text = '+' },
        change = { text = '~' },
        delete = { text = '_' },
        topdelete = { text = '‾' },
        changedelete = { text = '~' },
      },
    },
  },

  {
    'folke/tokyonight.nvim',
    priority = 1000,
    lazy = false,
    config = function()
      require('tokyonight').setup {
        -- your configuration comes here
        -- or leave it empty to use the default settings
        style = 'night', -- The theme comes in three styles, `storm`, `moon`, a darker variant `night` and `day`
        light_style = 'day', -- The theme is used when the background is set to light
        transparent = true, -- Enable this to disable setting the background color
        terminal_colors = true, -- Configure the colors used when opening a `:terminal` in [Neovim](https://github.com/neovim/neovim)
        styles = {
          -- Style to be applied to different syntax groups
          -- Value is any valid attr-list value for `:help nvim_set_hl`
          comments = { italic = false },
          keywords = { italic = false },
          functions = {},
          variables = {},
          -- Background styles. Can be "dark", "transparent" or "normal"
          sidebars = 'transparent', -- style for sidebars, see below
          floats = 'transparent', -- style for floating windows
        },
        sidebars = { 'qf', 'help' }, -- Set a darker background on sidebar-like windows. For example: `["qf", "vista_kind", "terminal", "packer"]`
        day_brightness = 0.3, -- Adjusts the brightness of the colors of the **Day** style. Number between 0 and 1, from dull to vibrant colors
        hide_inactive_statusline = false, -- Enabling this option, will hide inactive statuslines and replace them with a thin border instead. Should work with the standard **StatusLine** and **LuaLine**.
        dim_inactive = false, -- dims inactive windows
        lualine_bold = false, -- When `true`, section headers in the lualine theme will be bold
      }
      vim.cmd.colorscheme 'tokyonight'
    end,
  },

  -- "gc" to comment visual regions/lines
  { 'numToStr/Comment.nvim', opts = {} },

  -- Fuzzy Finder (files, lsp, etc)
  {
    'nvim-telescope/telescope.nvim',
    event = 'VeryLazy',
    branch = '0.1.x',
    dependencies = {
      'nvim-lua/plenary.nvim',
      -- Fuzzy Finder Algorithm which requires local dependencies to be built.
      -- Only load if `make` is available. Make sure you have the system
      -- requirements installed.
      {
        'nvim-telescope/telescope-fzf-native.nvim',
        -- NOTE: If you are having trouble with this installation,
        --       refer to the README for telescope-fzf-native for more instructions.
        build = 'make',
        cond = function()
          return vim.fn.executable 'make' == 1
        end,
      },
      { 'nvim-telescope/telescope-ui-select.nvim' },
    },
    config = function()
      -- Telescope is a fuzzy finder that comes with a lot of different things that
      -- it can fuzzy find! It's more than just a "file finder", it can search
      -- many different aspects of Neovim, your workspace, LSP, and more!
      --
      -- The easiest way to use telescope, is to start by doing something like:
      --  :Telescope help_tags
      --
      -- After running this command, a window will open up and you're able to
      -- type in the prompt window. You'll see a list of help_tags options and
      -- a corresponding preview of the help.
      --
      -- Two important keymaps to use while in telescope are:
      --  - Insert mode: <c-/>
      --  - Normal mode: ?
      --
      -- This opens a window that shows you all of the keymaps for the current
      -- telescope picker. This is really useful to discover what Telescope can
      -- do as well as how to actually do it!

      -- [[ Configure Telescope ]]
      -- See `:help telescope` and `:help telescope.setup()`
      require('telescope').setup {
        -- You can put your default mappings / updates / etc. in here
        --  All the info you're looking for is in `:help telescope.setup()`
        --
        -- defaults = {
        --   mappings = {
        --     i = { ['<c-enter>'] = 'to_fuzzy_refine' },
        --   },
        -- },
        -- pickers = {}
        extensions = {
          ['ui-select'] = {
            require('telescope.themes').get_dropdown(),
          },
        },
      }

      -- Enable telescope extensions, if they are installed
      pcall(require('telescope').load_extension, 'fzf')
      pcall(require('telescope').load_extension, 'ui-select')
      pcall(require('telescope').load_extension, 'dap')

      -- See `:help telescope.builtin`
      local builtin = require 'telescope.builtin'
      vim.keymap.set('n', '<leader>sh', builtin.help_tags, { desc = '[S]earch [H]elp' })
      vim.keymap.set('n', '<leader>sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' })
      vim.keymap.set('n', '<leader>sf', builtin.find_files, { desc = '[S]earch [F]iles' })
      vim.keymap.set('n', '<leader>ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' })
      vim.keymap.set('n', '<leader>sw', builtin.grep_string, { desc = '[S]earch current [W]ord' })
      vim.keymap.set('n', '<leader>sg', builtin.live_grep, { desc = '[S]earch by [G]rep' })
      vim.keymap.set('n', '<leader>sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' })
      vim.keymap.set('n', '<leader>sr', builtin.resume, { desc = '[S]earch [R]esume' })
      vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
      vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' })

      -- Slightly advanced example of overriding default behavior and theme
      vim.keymap.set('n', '<leader>/', function()
        -- You can pass additional configuration to telescope to change theme, layout, etc.
        builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
          winblend = 10,
          previewer = false,
        })
      end, { desc = '[/] Fuzzily search in current buffer' })

      -- Also possible to pass additional configuration options.
      --  See `:help telescope.builtin.live_grep()` for information about particular keys
      vim.keymap.set('n', '<leader>s/', function()
        builtin.live_grep {
          grep_open_files = true,
          prompt_title = 'Live Grep in Open Files',
        }
      end, { desc = '[S]earch [/] in Open Files' })

      -- Shortcut for searching your neovim configuration files
      vim.keymap.set('n', '<leader>sn', function()
        builtin.find_files { cwd = vim.fn.stdpath 'config' }
      end, { desc = '[S]earch [N]eovim files' })
    end,
  },

  -- NOTE: This is where your plugins related to LSP can be installed.
  --  The configuration is done below. Search for lspconfig to find it below.
  {
    -- LSP Configuration & Plugins
    'neovim/nvim-lspconfig',
    dependencies = {
      -- Automatically install LSPs to stdpath for neovim
      'williamboman/mason.nvim',
      'williamboman/mason-lspconfig.nvim',
      'WhoIsSethDaniel/mason-tool-installer.nvim',

      -- Useful status updates for LSP
      -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
      { 'j-hui/fidget.nvim', opts = {} },
    },
    config = function()
      -- Brief Aside: **What is LSP?**
      --
      -- LSP is an acronym you've probably heard, but might not understand what it is.
      --
      -- LSP stands for Language Server Protocol. It's a protocol that helps editors
      -- and language tooling communicate in a standardized fashion.
      --
      -- In general, you have a "server" which is some tool built to understand a particular
      -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc). These Language Servers
      -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone
      -- processes that communicate with some "client" - in this case, Neovim!
      --
      -- LSP provides Neovim with features like:
      --  - Go to definition
      --  - Find references
      --  - Autocompletion
      --  - Symbol Search
      --  - and more!
      --
      -- Thus, Language Servers are external tools that must be installed separately from
      -- Neovim. This is where `mason` and related plugins come into play.
      --
      -- If you're wondering about lsp vs treesitter, you can check out the wonderfully
      -- and elegantly composed help section, :help lsp-vs-treesitter

      --  This function gets run when an LSP attaches to a particular buffer.
      --    That is to say, every time a new file is opened that is associated with
      --    an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this
      --    function will be executed to configure the current buffer

      local on_attach = function(event)
        -- NOTE: Remember that lua is a real programming language, and as such it is possible
        -- to define small helper and utility functions so you don't have to repeat yourself
        -- many times.
        --
        -- In this case, we create a function that lets us more easily define mappings specific
        -- for LSP related items. It sets the mode, buffer and description for us each time.
        local map = function(keys, func, desc)
          vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
        end

        -- Jump to the definition of the word under your cursor.
        --  This is where a variable was first declared, or where a function is defined, etc.
        --  To jump back, press <C-T>.
        map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')

        -- Find references for the word under your cursor.
        map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')

        -- Jump to the implementation of the word under your cursor.
        --  Useful when your language has ways of declaring types without an actual implementation.
        map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')

        -- Jump to the type of the word under your cursor.
        --  Useful when you're not sure what type a variable is and you want to see
        --  the definition of its *type*, not where it was *defined*.
        map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')

        -- Fuzzy find all the symbols in your current document.
        --  Symbols are things like variables, functions, types, etc.
        map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')

        -- Fuzzy find all the symbols in your current workspace
        --  Similar to document symbols, except searches over your whole project.
        map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')

        -- Rename the variable under your cursor
        --  Most Language Servers support renaming across files, etc.
        map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')

        -- Execute a code action, usually your cursor needs to be on top of an error
        -- or a suggestion from your LSP for this to activate.
        map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')

        -- Opens a popup that displays documentation about the word under your cursor
        --  See `:help K` for why this keymap
        map('K', vim.lsp.buf.hover, 'Hover Documentation')

        -- WARN: This is not Goto Definition, this is Goto Declaration.
        --  For example, in C this would take you to the header
        map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')

        -- The following two autocommands are used to highlight references of the
        -- word under your cursor when your cursor rests there for a little while.
        --    See `:help CursorHold` for information about when this is executed
        --
        -- When you move your cursor, the highlights will be cleared (the second autocommand).
        local client = vim.lsp.get_client_by_id(event.data.client_id)
        if client and client.server_capabilities.documentHighlightProvider then
          vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
            buffer = event.buf,
            callback = vim.lsp.buf.document_highlight,
          })

          vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, {
            buffer = event.buf,
            callback = vim.lsp.buf.clear_references,
          })
        end
      end

      vim.api.nvim_create_autocmd('LspAttach', {
        group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }),
        callback = on_attach,
      })

      -- LSP servers and clients are able to communicate to each other what features they support.
      --  By default, Neovim doesn't support everything that is in the LSP Specification.
      --  When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
      --  So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
      local capabilities = vim.lsp.protocol.make_client_capabilities()
      capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())

      -- Enable the following language servers
      --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
      --
      --  Add any additional override configuration in the following tables. Available keys are:
      --  - cmd (table): Override the default command used to start the server
      --  - filetypes (table): Override the default list of associated filetypes for the server
      --  - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
      --  - settings (table): Override the default settings passed when initializing the server.
      --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
      local servers = {
        clangd = {},
        gopls = {},
        pyright = {},
        rust_analyzer = {},
        -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
        --
        -- Some languages (like typescript) have entire language plugins that can be useful:
        --    https://github.com/pmizio/typescript-tools.nvim
        --
        -- But for many setups, the LSP (`tsserver`) will work just fine
        -- tsserver = {},
        --

        lua_ls = {
          -- cmd = {...},
          -- filetypes { ...},
          -- capabilities = {},
          settings = {
            Lua = {
              runtime = { version = 'LuaJIT' },
              workspace = {
                checkThirdParty = false,
                -- Tells lua_ls where to find all the Lua files that you have loaded
                -- for your neovim configuration.
                library = {
                  '${3rd}/luv/library',
                  unpack(vim.api.nvim_get_runtime_file('', true)),
                },
                -- If lua_ls is really slow on your computer, you can try this instead:
                -- library = { vim.env.VIMRUNTIME },
              },
              -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
              -- diagnostics = { disable = { 'missing-fields' } },
            },
          },
        },
      }

      -- Ensure the servers and tools above are installed
      --  To check the current status of installed tools and/or manually install
      --  other tools, you can run
      --    :Mason
      --
      --  You can press `g?` for help in this menu
      require('mason').setup()

      -- You can add other tools here that you want Mason to install
      -- for you, so that they are available from within Neovim.
      local ensure_installed = vim.tbl_keys(servers or {})
      vim.list_extend(ensure_installed, {
        'stylua', -- Used to format lua code
        'debugpy',
        'black',
      })
      require('mason-tool-installer').setup { ensure_installed = ensure_installed }

      require('mason-lspconfig').setup {
        handlers = {
          function(server_name)
            local server = servers[server_name] or {}
            require('lspconfig')[server_name].setup {
              cmd = server.cmd,
              settings = server.settings,
              filetypes = server.filetypes,
              -- This handles overriding only values explicitly passed
              -- by the server configuration above. Useful when disabling
              -- certain features of an LSP (for example, turning off formatting for tsserver)
              capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {}),
            }
          end,
        },
      }
    end,
  },

  { -- Autoformat
    'stevearc/conform.nvim',
    opts = {
      notify_on_error = false,
      format_on_save = {
        timeout_ms = 500,
        lsp_fallback = true,
      },
      formatters_by_ft = {
        lua = { 'stylua' },
        python = { 'black' },
      },
    },
  },

  { -- Autocompletion
    'hrsh7th/nvim-cmp',
    event = 'InsertEnter',
    dependencies = {
      -- Snippet Engine & its associated nvim-cmp source
      {
        'L3MON4D3/LuaSnip',
        build = (function()
          -- Build Step is needed for regex support in snippets
          -- This step is not supported in many windows environments
          -- Remove the below condition to re-enable on windows
          if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then
            return
          end
          return 'make install_jsregexp'
        end)(),
      },
      'saadparwaiz1/cmp_luasnip',

      -- Adds other completion capabilities.
      --  nvim-cmp does not ship with all sources by default. They are split
      --  into multiple repos for maintenance purposes.
      'hrsh7th/cmp-nvim-lsp',
      'hrsh7th/cmp-path',

      -- If you want to add a bunch of pre-configured snippets,
      --    you can use this plugin to help you. It even has snippets
      --    for various frameworks/libraries/etc. but you will have to
      --    set up the ones that are useful for you.
      'rafamadriz/friendly-snippets',
    },
    config = function()
      -- See `:help cmp`
      local cmp = require 'cmp'
      local luasnip = require 'luasnip'
      require('luasnip.loaders.from_vscode').lazy_load()
      luasnip.config.setup {}

      cmp.setup {
        snippet = {
          expand = function(args)
            luasnip.lsp_expand(args.body)
          end,
        },
        completion = { completeopt = 'menu,menuone,noinsert' },

        -- For an understanding of why these mappings were
        -- chosen, you will need to read `:help ins-completion`
        --
        -- No, but seriously. Please read `:help ins-completion`, it is really good!
        mapping = cmp.mapping.preset.insert {
          -- Select the [n]ext item
          ['<C-n>'] = cmp.mapping.select_next_item(),
          -- Select the [p]revious item
          ['<C-p>'] = cmp.mapping.select_prev_item(),

          -- Accept ([y]es) the completion.
          --  This will auto-import if your LSP supports it.
          --  This will expand snippets if the LSP sent a snippet.
          ['<C-y>'] = cmp.mapping.confirm { select = true },

          -- Manually trigger a completion from nvim-cmp.
          --  Generally you don't need this, because nvim-cmp will display
          --  completions whenever it has completion options available.
          ['<C-Space>'] = cmp.mapping.complete {},

          -- Think of <c-l> as moving to the right of your snippet expansion.
          --  So if you have a snippet that's like:
          --  function $name($args)
          --    $body
          --  end
          --
          -- <c-l> will move you to the right of each of the expansion locations.
          -- <c-h> is similar, except moving you backwards.
          ['<C-l>'] = cmp.mapping(function()
            if luasnip.expand_or_locally_jumpable() then
              luasnip.expand_or_jump()
            end
          end, { 'i', 's' }),
          ['<C-h>'] = cmp.mapping(function()
            if luasnip.locally_jumpable(-1) then
              luasnip.jump(-1)
            end
          end, { 'i', 's' }),
        },
        sources = {
          { name = 'nvim_lsp' },
          { name = 'luasnip' },
          { name = 'path' },
          { name = 'neorg' },
        },
      }
    end,
  },

  -- Highlight todo, notes, etc in comments
  { 'folke/todo-comments.nvim', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },

  { -- Collection of various small independent plugins/modules
    'echasnovski/mini.nvim',
    config = function()
      -- Better Around/Inside textobjects
      --
      -- Examples:
      --  - va)  - [V]isually select [A]round [)]parenthen
      --  - yinq - [Y]ank [I]nside [N]ext [']quote
      --  - ci'  - [C]hange [I]nside [']quote
      require('mini.ai').setup { n_lines = 500 }

      -- Add/delete/replace surroundings (brackets, quotes, etc.)
      --
      -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
      -- - sd'   - [S]urround [D]elete [']quotes
      -- - sr)'  - [S]urround [R]eplace [)] [']
      require('mini.surround').setup()

      -- Simple and easy statusline.
      --  You could remove this setup call if you don't like it,
      --  and try some other statusline plugin
      require('mini.statusline').setup()

      -- ... and there is more!
      --  Check out: https://github.com/echasnovski/mini.nvim
    end,
  },

  { -- Highlight, edit, and navigate code
    'nvim-treesitter/nvim-treesitter',
    build = ':TSUpdate',
    config = function()
      -- [[ Configure Treesitter ]] See `:help nvim-treesitter`

      ---@diagnostic disable-next-line: missing-fields
      require('nvim-treesitter.configs').setup {
        ensure_installed = { 'bash', 'c', 'html', 'lua', 'markdown', 'vim', 'vimdoc', 'rust', 'python' },
        -- Autoinstall languages that are not installed. Defaults to false (but you can change for yourself!)
        auto_install = true,
        highlight = { enable = true },
        indent = { enable = true },
      }

      -- There are additional nvim-treesitter modules that you can use to interact
      -- with nvim-treesitter. You should go explore a few and see what interests you:
      --
      --    - Incremental selection: Included, see :help nvim-treesitter-incremental-selection-mod
      --    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
      --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
    end,
  },

  {
    'mfussenegger/nvim-dap',
    { 'rcarriga/nvim-dap-ui', opts = {}, dependencies = 'nvim-neotest/nvim-nio' },
    { 'theHamsta/nvim-dap-virtual-text', opts = {} },
    'nvim-telescope/telescope-dap.nvim',

    --  Adaparter configuration for specific languages
    { 'mfussenegger/nvim-dap-python' },
    config = function()
      local dap, dapui = require 'dap', require 'dapui'

      require('dap-python').setup(vim.fn.stdpath 'data' .. '/mason/bin/debugpy')

      dap.listeners.before.attach.dapui_config = function()
        dapui.open()
      end
      dap.listeners.before.launch.dapui_config = function()
        dapui.open()
      end
      dap.listeners.before.event_terminated.dapui_config = function()
        dapui.close()
      end
      dap.listeners.before.event_exited.dapui_config = function()
        dapui.close()
      end

      vim.keymap.set('n', '<leader>b', require('dap').toggle_breakpoint)
      vim.keymap.set('n', '<leader>rr', require('dap').continue)
      vim.keymap.set('n', ';', require('dap').step_over)
      vim.keymap.set('n', '<C-;>', require('dap').step_into)

      dap.adapters.lldb = {
        type = 'executable',
        command = '/usr/bin/lldb-vscode', -- adjust as needed, must be absolute path
        name = 'lldb',
      }

      dap.configurations.cpp = {
        {
          name = 'Launch',
          type = 'lldb',
          request = 'launch',
          program = function()
            return vim.fn.input('Path to executable: ', vim.fn.getcwd() .. '/', 'file')
          end,
          cwd = '${workspaceFolder}',
          stopOnEntry = false,
          args = {},
        },
      }

      dap.configurations.c = dap.configurations.cpp

      local initCommands = function()
        local rustc_sysroot = vim.fn.trim(vim.fn.system 'rustc --print sysroot')

        local script_import = 'command script import "' .. rustc_sysroot .. '/lib/rustlib/etc/lldb_lookup.py"'
        local commands_file = rustc_sysroot .. '/lib/rustlib/etc/lldb_commands'

        local commands = {}
        local file = io.open(commands_file, 'r')

        if file then
          for line in file:lines() do
            table.insert(commands, line)
          end

          file:close()
        end

        table.insert(commands, 1, script_import)

        return commands
      end

      dap.configurations.rust = {
        {
          name = 'Launch',
          type = 'lldb',
          request = 'launch',
          program = function()
            return vim.fn.input('Path to executable: ', vim.fn.getcwd() .. '/', 'file')
          end,
          cwd = '${workspaceFolder}',
          stopOnEntry = false,
          args = {},
          initCommands = initCommands,
        },
        {
          name = 'Launch - Debug - Same Name As Directory',
          type = 'lldb',
          request = 'launch',
          cwd = '${workspaceFolder}',
          stopOnEntry = false,
          args = {},
          program = function()
            local current_dir = vim.fn.getcwd()
            if not current_dir then
              return ''
            end
            local project_name = vim.fs.basename(current_dir)

            return current_dir .. '/target/debug/' .. project_name
          end,
          initCommands = initCommands,
        },
      }
    end,
  },

  {
    'folke/zen-mode.nvim',
    opts = {
      window = {
        width = 80,
        options = {
          signcolumn = 'no', -- disable signcolumn
          number = false, -- disable number column
          relativenumber = false, -- disable relative numbers
          cursorline = false, -- disable cursorline
          cursorcolumn = false, -- disable cursor column
          foldcolumn = '0', -- disable fold column
          list = false, -- disable whitespace characters
        },
      },
      plugins = {
        tmux = { enabled = true },
      },
    },
    keys = {
      { '<leader>f', '<CMD>ZenMode<CR>', desc = 'Zen Mode' },
    },
  },

  {
    'serenevoid/kiwi.nvim',
    lazy = true,
    dependencies = {
      'nvim-lua/plenary.nvim',
    },
    opts = {
      {
        name = 'personal',
        path = vim.fn.stdpath 'data' .. '/kiwi/personal',
      },
      {
        name = 'study',
        path = vim.fn.stdpath 'data' .. '/kiwi/study',
      },
    },
    keys = {
      {
        '<leader>ww',
        function()
          require('kiwi').open_wiki_index()
        end,
        desc = 'Open Wiki index',
      },
      {
        '<leader>wp',
        function()
          require('kiwi').open_wiki_index 'personal'
        end,
        desc = 'Open index of personal wiki',
      },
      {
        '<leader>T',
        function()
          require('kiwi').todo.toggle()
        end,
        desc = 'Toggle Markdown Task',
      },
    },
  },

  {
    'zbirenbaum/copilot.lua',
    cmd = 'Copilot',
    event = 'InsertEnter',
    opts = {},
  },

  -- Language specific plugins
  {
    'rust-lang/rust.vim',
    ft = 'rust',
  },

  {
    'jalvesaq/Nvim-R',
    ft = { 'r', 'rnoweb', 'rhelp', 'rrst', 'rmd', 'quarto' },
    config = function()
      vim.g.R_assign_map = '<M-->'
    end,
  },

  {
    'lervag/vimtex',
    ft = 'tex',
  },

  {
    'vhyrro/luarocks.nvim',
    priority = 1000,
    config = true,
  },

  {
    'nvim-neorg/neorg',
    dependencies = { 'luarocks.nvim' },
    ft = 'norg',
    cmd = 'Neorg',
    version = '*', -- Pin Neorg to the latest stable release
    opts = {
      load = {
        ['core.defaults'] = {},
        ['core.concealer'] = {},
        ['core.dirman'] = {
          config = {
            workspaces = {
              notes = '~/Documents/Notes', -- Format: <name_of_workspace> = <path_to_workspace_root>
            },
            default_workspace = 'notes',
            index = 'index.norg', -- The name of the main (root) .norg file
          },
        },
        ['core.completion'] = {
          config = {
            engine = 'nvim-cmp',
          },
        },
        ['core.integrations.nvim-cmp'] = {},
      },
    },
  },
}, {})

-- The line beneath this is called `modeline`. See `:help modeline`
-- vim: ts=2 sts=2 sw=2 et