Skip to content

Latest commit

 

History

History
520 lines (388 loc) · 9.82 KB

api_loads.md

File metadata and controls

520 lines (388 loc) · 9.82 KB
Raw

Manage your loads via the RESTful API

Overview

The loads services provides access to all loads (e.g. lights, blinds) of your installation.

Do not forget to include the authentication token in all your requests!

To modify the state of a load, there are two possibilities:

  • Using the API target_state
    • Use target_state to set the desired end-state of a load using a value e.g. bri (brightness)
  • Using the API ctrl
    • Use ctrl to invoke (simulate) a button-event, e.g. click, press, release

🐮 Help! I need somebody Help !

API loads

GET /api/loads

This example demonstrates how to get all connected loads (lights & blinds) of your wiser-by-feller-installation.

Request header:

GET /api/loads HTTP/1.1
Authorization: Bearer 60650cf4-5d26-4294-b1f2-6c06adc9d0d8
host: example.com

Response header:

HTTP/1.1 200 OK
Content-Type: application/json

Response body:

{
  "data": [
    {
      "id": 1,
      "type": "onoff",
      "name": "0000133a_0",
      "device": "0000133a",
      "channel": 0,
      "unused": false
    },
    {
      "id": 2,
      "type": "dim",
      "name": "0000144b_0",
      "device": "0000144b",
      "channel": 0,
      "unused": false
    },
    {
      "id": 3,
      "type": "motor",
      "name": "0000155c_0",
      "device": "0000155c",
      "channel": 0,
      "unused": false
    }
  ],
  "status": "success"
}

API loads state

GET /api/loads/state

Get all loads (lights & blinds) state of your wiser-installation.

Request header:

GET /api/loads/state HTTP/1.1
Authorization: Bearer 60650cf4-5d26-4294-b1f2-6c06adc9d0d8
host: example.com

Response header:

HTTP/1.1 200 OK
Content-Type: application/json

Response body:

{
  "data": [
    {
      "id": 1,
      "state": {
        "bri": 10000
      }
    },
    {
      "id": 2,
      "state": {
        "bri": 0,
        "flags": {
          "over_current": 0,
          "fading": 0,
          "noise": 0,
          "direction": 0,
          "over_temperature": 0
        }
      }
    },
    {
      "id": 3,
      "state": {
        "level": 8160,
        "tilt": 0,
        "moving": "stop",
        "flags": {
          "direction": 0,
          "learning": 0,
          "moving": 0,
          "under_current": 0,
          "over_current": 0,
          "timeout": 0,
          "locked": 0
        }
      }
    }
  ],
  "status": "success"
}

API loads target state

PUT /api/loads/< id >/target_state

Set the target state of a load.

Possible target_state values per load-type:

Type Attribute(s)
onoff bri
dim bri
motor level, tilt

Example onoff type (using target_state)

Let's set the load state of an onoff type.

To turn on or off a load set the attribute bri (brightness) to the following values:

  • Turn off set the bri attribute to 0
  • Turn on set the bri attribute to 10000

Request header:

PUT /api/loads/1/target_state HTTP/1.1
Authorization: Bearer 60650cf4-5d26-4294-b1f2-6c06adc9d0d8
Content-Type: application/json
host: example.com

Request body:

{
  "bri": 0
}

Response header:

HTTP/1.1 200 OK
Content-Type: application/json

Response body:

{
  "data": {
    "id": 1,
    "target_state": {
      "bri": 0
    }
  },
  "status": "success"
}

Example dim type (using target_state)

Let's set the load state of a dim type.

On a dimmable light you can set the target brightness between 0% and 100% (0 - 10000).

  • Turn off set the bri attribute to 0
  • To dim set the bri attribute between 1 and 10000 (e.g. set bri to 5000, means 50% of brightness)

Request header:

PUT /api/loads/2/target_state HTTP/1.1
Authorization: Bearer 60650cf4-5d26-4294-b1f2-6c06adc9d0d8
Content-Type: application/json
host: example.com

Request body:

{
  "bri": 5000
}

Response header:

HTTP/1.1 200 OK
Content-Type: application/json

Response body:

{
  "data": {
    "id": 2,
    "target_state": {
      "bri": 5000
    }
  },
  "status": "success"
}

Example motor type (using target_state)

Let's set the load state of a motor type.

On a motor e.g. shutter/blind you can set the target level between 0% and 100% (0 - 10000) and a tilt value.

Shutter position (target level)
  • To set the shutter in open position set the level attribute to 0
  • To set the shutter in close position set the level attribute to 10000
  • To control the shutter set the level attribute between 1 and 10000 (e.g. set level to 5000, means set the shutter/blind to position 50%)
Slats of a shutter (number of tilt)
  • Tilt in number of tilt commands. Finally it's the motor running time, because we don't know the slat position in degrees

Request header:

PUT /api/loads/3/target_state HTTP/1.1
Authorization: Bearer 60650cf4-5d26-4294-b1f2-6c06adc9d0d8
Content-Type: application/json
host: example.com

Request body:

{
  "level": 5000,
  "tilt": 2
}

Response header:

HTTP/1.1 200 OK
Content-Type: application/json

Response body:

{
  "data": {
    "id": 3,
    "target_state": {
      "level": 5000,
      "tilt": 2
    }
  },
  "status": "success"
}

API loads ctrl

PUT /api/loads/< id >/ctrl

Button types

Possible button types: on, off, up, down, toggle

Button events

Possible button events:

Event Description
click if the button was pressed shorter than 500ms
press if the button was pressed 500ms or longer
release must follow after a pressed event

Example onoff type (using ctrl)

Let's control the load of an onoff type.

  • To turn on the light set the following attributes:

    Attribute Value
    button on
    event click

  • To turn off the light set the following attributes:

    Attribute Value
    button off
    event click

Request header:

PUT /api/loads/1/ctrl HTTP/1.1
Authorization: Bearer 60650cf4-5d26-4294-b1f2-6c06adc9d0d8
Content-Type: application/json
host: example.com

Request body:

{
  "button": "on",
  "event": "click"
}

Response header:

HTTP/1.1 200 OK
Content-Type: application/json

Response body:

{
  "status": "success",
  "data": {
      "id": 1,
      "ctrl": {
          "button": "on",
          "event": "click"
      }
  }
}

Example dim type (using ctrl)

Let's control the load of a dim type.

A dimmable light can be turned on (100%) or off (0%) on short button-click. If the button is pressed the dimmable light start to fade until the button is release.

  • To turn on a dimmable light set the following attributes:

    Attribute Value
    button up
    event click

  • To turn off the dimmable light set the following attributes:

    Attribute Value
    button down
    event click

  • To fade up a dimmable light set the following attributes:

    Attribute Value
    button up
    event press

    Wait shortly and then set the following attributes:

    Attribute Value
    button up
    event release

  • To fade down a dimmable light set the following attributes:

    Attribute Value
    button down
    event press

    Wait shortly and then set the following attributes:

    Attribute Value
    button down
    event release

Example motor type (using ctrl)

Let's control the load of a motor type.

On short button-click the slats of the shutter tilts one step (up/down).

If the button is pressed for a while and then released the motor e.g. shutter/blind starts moving (up/down) until reaching the end position. During the motor is moving it's possible to stop it with a short button-click.

  • To tilt up the slats of the shutter set the following attributes:

    Attribute Value
    button up
    event click

  • To tilt down the slats of the shutter set the following attributes:

    Attribute Value
    button down
    event click

  • To move up a motor until reaching the end position set the following attributes:

    Attribute Value
    button up
    event press

    Wait for a while and then set the following attributes:

    Attribute Value
    button up
    event release

  • To move down a motor until reaching the end position set the following attributes:

    Attribute Value
    button down
    event press

    Wait for a while and then set the following attributes:

    Attribute Value
    button down
    event release

  • To move up a motor until reaching the favorite position set the following attributes:

    Attribute Value
    button up
    event press

    Wait for a while and then set the following attributes:

    Attribute Value
    button up
    event release

    Wait until the motor reaching the favorite position and then set the following attributes:

    Attribute Value
    button up
    event click

  • To move down a motor until reaching your favorite position set the following attributes:

    Attribute Value
    button down
    event press

    Wait for a while and then set the following attributes:

    Attribute Value
    button down
    event release

    Wait until the motor e.g. shutter/blind reach your favorite position and then set the following attributes:

    Attribute Value
    button down
    event click