Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Voltage values #117

Open
OK1TK opened this issue Nov 19, 2024 · 4 comments
Open

Voltage values #117

OK1TK opened this issue Nov 19, 2024 · 4 comments

Comments

@OK1TK
Copy link

OK1TK commented Nov 19, 2024

Hi guys, juset interesting. What are the voltage values or voltages ranges on R1, R2 and then on the RA0/AN0
and RA1/AN1 ?
@OK1TK
Copy link
Author

OK1TK commented Nov 27, 2024 •
edited
Loading

Based on the topic here I calculated thare should by ca 12V on the tandem-match output and ca 3.8V on the FWD/ RVS pins of the PIC for 150W. I hope that's correct.

@Dfinitski
Copy link
Owner

Hi, yes 4.2 volts is the maximum value for pic ADC inputs

@OK1TK
Copy link
Author

OK1TK commented Nov 28, 2024

Hi, yes 4.2 volts is the maximum value for pic ADC inputs

Thank you David and the AC voltage alternativní the tandem-match I calculated ca 12V for 150W. Is that also correct ?

@Dfinitski
Copy link
Owner

Yes, that is right. The maximum measuring power is about 150W when 10:1 tandem match ratio.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@Dfinitski @OK1TK