Skip to content

Latest commit

 

History

History
96 lines (73 loc) · 3.2 KB

INSTALL_OPAM.md

File metadata and controls

96 lines (73 loc) · 3.2 KB
Raw

Second method to install ocaml

This method for installing ocaml allows more flexibility, but is more involved than the method in INSTALL.md, because it depends on "opam".

First install opam and needed prerequisites:

  • Under Mac OS X, this is done by install "Homebrew", available from http://brew.sh/, and then using it to install opam with the following command.

    $ brew install opam gtksourceview3

    Then set up the opam system as follows.

    • with latest OCaml (not guaranteed to work well with Coq):

      $ opam init --bare
$ opam switch create --empty empty
$ opam install -y num lablgtk conf-gtksourceview lablgtk3-sourceview3 camlp5

    • with OCaml 4.07.1+flambda (should work on most systems, refer to #1315 for details)

      $ opam init --bare
$ opam switch create with-coq 4.07.1+flambda
$ opam install -y num lablgtk conf-gtksourceview lablgtk3-sourceview3 camlp5

  • Under Ubuntu:

    First, install "opam":

    sudo apt-get install -y opam

    Now check which version of opam is installed with the command opam --version. If it is less than version 2, then we need to get opam from a "ppa", as follows.

    sudo add-apt-repository -y ppa:avsm/ppa
sudo apt update
sudo apt install -y opam

    (Ubuntu 18.04 comes with opam 1.2.2, whereas Ubuntu 19.04 comes with opam 2.0.3.)

    Then install needed libraries as follows.

    sudo apt-get install --quiet --no-install-recommends pkg-config libcairo2-dev libexpat1-dev libgtk-3-dev libgtksourceview-3.0-dev libexpat1-dev libgtk2.0-dev mccs m4 git ca-certificates camlp5 libgtksourceview2.0-dev

    Then set up the opam system as follows.

    $ opam init --bare
$ opam switch create --empty empty
$ opam install -y --solver=mccs num lablgtk conf-gtksourceview lablgtk3-sourceview3 camlp5

In both of the procedures above, we ignore any ocaml compiler offered by the system, preferring to let opam install its preferred compiler. That avoid problems with version skew, which I don't understand.

The packages involving "gtk", installed above, are relevant only if coqide is to be built.

Now arrange for the programs installed by opam to be available to the currently running shell:

$ eval `opam env`

If you haven't done it previously in connection with installing opam, as you have just done, arrange for the programs (such as ocamlc) that opam will install for you to be found by your shell the next time you log in by also adding the line above to your file ~/.profile, after any lines in the file that add /usr/local/bin to the PATH environment variable. (Homebrew and opam both know how to install ocamlc, and we intend to use opam to get a version of ocamlc appropriate for compiling the version of Coq used by UniMath.)

At any time, you may check that the progams installed by opam are accessible by you as follows.

$ type ocamlc
ocamlc is hashed (/Users/XXXXXXXX/.opam/empty/bin/ocamlc)

A result displaying a path that doesn't pass through .opam indicates that the wrong compiler is visible in the directories listed in your PATH environment variable.