Merge tag 'linux-can-fixes-for-6.17-20250923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2025-09-23

The 1st patch is by Chen Yufeng and fixes a potential NULL pointer
deref in the hi311x driver.

Duy Nguyen contributes a patch for the rcar_canfd driver to fix the
controller mode setting.

The next 4 patches are by Vincent Mailhol and populate the
ndo_change_mtu(( callback in the etas_es58x, hi311x, sun4i_can and
mcba_usb driver to prevent buffer overflows.

Stéphane Grosjean's patch for the peak_usb driver fixes a
shift-out-of-bounds issue.

* tag 'linux-can-fixes-for-6.17-20250923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: peak_usb: fix shift-out-of-bounds issue
  can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflow
  can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow
  can: hi311x: populate ndo_change_mtu() to prevent buffer overflow
  can: etas_es58x: populate ndo_change_mtu() to prevent buffer overflow
  can: rcar_canfd: Fix controller mode setting
  can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled
====================

Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

Author: kuba-moo

drivers/net/can/rcar/rcar_canfd.c

@@ -823,9 +823,6 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
 	/* Reset Global error flags */
 	rcar_canfd_write(gpriv->base, RCANFD_GERFL, 0x0);
 
-	/* Set the controller into appropriate mode */
-	rcar_canfd_set_mode(gpriv);
-
 	/* Transition all Channels to reset mode */
 	for_each_set_bit(ch, &gpriv->channels_mask, gpriv->info->max_channels) {
 		rcar_canfd_clear_bit(gpriv->base,
@@ -844,6 +841,10 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
 			return err;
 		}
 	}
+
+	/* Set the controller into appropriate mode */
+	rcar_canfd_set_mode(gpriv);
+
 	return 0;
 }
 

drivers/net/can/spi/hi311x.c

@@ -545,8 +545,6 @@ static int hi3110_stop(struct net_device *net)
 
 	priv->force_quit = 1;
 	free_irq(spi->irq, priv);
-	destroy_workqueue(priv->wq);
-	priv->wq = NULL;
 
 	mutex_lock(&priv->hi3110_lock);
 
@@ -770,34 +768,23 @@ static int hi3110_open(struct net_device *net)
 		goto out_close;
 	}
 
-	priv->wq = alloc_workqueue("hi3110_wq", WQ_FREEZABLE | WQ_MEM_RECLAIM,
-				   0);
-	if (!priv->wq) {
-		ret = -ENOMEM;
-		goto out_free_irq;
-	}
-	INIT_WORK(&priv->tx_work, hi3110_tx_work_handler);
-	INIT_WORK(&priv->restart_work, hi3110_restart_work_handler);
-
 	ret = hi3110_hw_reset(spi);
 	if (ret)
-		goto out_free_wq;
+		goto out_free_irq;
 
 	ret = hi3110_setup(net);
 	if (ret)
-		goto out_free_wq;
+		goto out_free_irq;
 
 	ret = hi3110_set_normal_mode(spi);
 	if (ret)
-		goto out_free_wq;
+		goto out_free_irq;
 
 	netif_wake_queue(net);
 	mutex_unlock(&priv->hi3110_lock);
 
 	return 0;
 
- out_free_wq:
-	destroy_workqueue(priv->wq);
  out_free_irq:
 	free_irq(spi->irq, priv);
 	hi3110_hw_sleep(spi);
@@ -812,6 +799,7 @@ static const struct net_device_ops hi3110_netdev_ops = {
 	.ndo_open = hi3110_open,
 	.ndo_stop = hi3110_stop,
 	.ndo_start_xmit = hi3110_hard_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct ethtool_ops hi3110_ethtool_ops = {
@@ -908,6 +896,15 @@ static int hi3110_can_probe(struct spi_device *spi)
 	if (ret)
 		goto out_clk;
 
+	priv->wq = alloc_workqueue("hi3110_wq", WQ_FREEZABLE | WQ_MEM_RECLAIM,
+				   0);
+	if (!priv->wq) {
+		ret = -ENOMEM;
+		goto out_clk;
+	}
+	INIT_WORK(&priv->tx_work, hi3110_tx_work_handler);
+	INIT_WORK(&priv->restart_work, hi3110_restart_work_handler);
+
 	priv->spi = spi;
 	mutex_init(&priv->hi3110_lock);
 
@@ -943,6 +940,8 @@ static int hi3110_can_probe(struct spi_device *spi)
 	return 0;
 
  error_probe:
+	destroy_workqueue(priv->wq);
+	priv->wq = NULL;
 	hi3110_power_enable(priv->power, 0);
 
  out_clk:
@@ -963,6 +962,9 @@ static void hi3110_can_remove(struct spi_device *spi)
 
 	hi3110_power_enable(priv->power, 0);
 
+	destroy_workqueue(priv->wq);
+	priv->wq = NULL;
+
 	clk_disable_unprepare(priv->clk);
 
 	free_candev(net);

drivers/net/can/sun4i_can.c

@@ -768,6 +768,7 @@ static const struct net_device_ops sun4ican_netdev_ops = {
 	.ndo_open = sun4ican_open,
 	.ndo_stop = sun4ican_close,
 	.ndo_start_xmit = sun4ican_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct ethtool_ops sun4ican_ethtool_ops = {

drivers/net/can/usb/etas_es58x/es58x_core.c

@@ -7,7 +7,7 @@
  *
  * Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved.
  * Copyright (c) 2020 ETAS K.K.. All rights reserved.
- * Copyright (c) 2020-2022 Vincent Mailhol <mailhol[email protected]>
+ * Copyright (c) 2020-2025 Vincent Mailhol <mailhol@kernel.org>
  */
 
 #include <linux/unaligned.h>
@@ -1977,6 +1977,7 @@ static const struct net_device_ops es58x_netdev_ops = {
 	.ndo_stop = es58x_stop,
 	.ndo_start_xmit = es58x_start_xmit,
 	.ndo_eth_ioctl = can_eth_ioctl_hwts,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct ethtool_ops es58x_ethtool_ops = {

drivers/net/can/usb/mcba_usb.c

@@ -761,6 +761,7 @@ static const struct net_device_ops mcba_netdev_ops = {
 	.ndo_open = mcba_usb_open,
 	.ndo_stop = mcba_usb_close,
 	.ndo_start_xmit = mcba_usb_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct ethtool_ops mcba_ethtool_ops = {

drivers/net/can/usb/peak_usb/pcan_usb_core.c

@@ -111,7 +111,7 @@ void peak_usb_update_ts_now(struct peak_time_ref *time_ref, u32 ts_now)
 		u32 delta_ts = time_ref->ts_dev_2 - time_ref->ts_dev_1;
 
 		if (time_ref->ts_dev_2 < time_ref->ts_dev_1)
-			delta_ts &= (1 << time_ref->adapter->ts_used_bits) - 1;
+			delta_ts &= (1ULL << time_ref->adapter->ts_used_bits) - 1;
 
 		time_ref->ts_total += delta_ts;
 	}