only half of my ILI9341 are used 240x240

[ats3788]

Hello I work with PlatformIO
and the ESP-Wover-Kit 4.1
My PlatformIO.ini is like this
`
; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[platformio]
src_dir = .
default_envs = cyd

[env]
platform = espressif32
board = esp32dev
framework = arduino
lib_ldf_mode = deep
lib_deps =
bodmer/TFT_eSPI@
https://github.com/PaulStoffregen/XPT2046_Touchscreen.git ;#v1.4
lvgl/lvgl@^8.3.6 ; align this rev with the rev used by Squareline Studio
bitbank2/PNGdec@^1.0.2
bblanchon/ArduinoJson

monitor_speed = 115200
monitor_filters = esp32_exception_decoder
upload_speed = 921600
board_build.partitions = min_spiffs.csv
build_flags =
-I./src/
-I./src/ui/
-D USER_SETUP_LOADED
-D ILI9341_DRIVER
-D USE_HSPI_PORT
-D TFT_WIDTH=320
-D TFT_HEIGHT=240
-D TFT_MISO=25
-D TFT_MOSI=23
-D TFT_SCLK=19
-D TFT_CS=22
-D TFT_DC=21
-D TFT_RST=18
-D TFT_BL=5
-D TFT_BACKLIGHT_ON=HIGH
-D TFT_BACKLIGHT_OFF=LOW
-D LOAD_GLCD
-D SPI_FREQUENCY=55000000
-D SPI_READ_FREQUENCY=20000000
-D SPI_TOUCH_FREQUENCY=2500000
-D LOAD_FONT2
-D LOAD_FONT4
-D LOAD_FONT6
-D LOAD_FONT7
-D LOAD_FONT8
-D LOAD_GFXFF

[env:cyd]
build_flags =
${env.build_flags}
-DTFT_INVERSION_OFF
`
So far this woks well until yesterday I have a Sketch and the display only uses 240x240 dots with the same PplatformIO.ini
it works well, what could this be.

[JimDrewGH]

Rotation() wrong or the width/height are backwards? I ran into this a few days ago when using a ILI9341 display for the first time.