-
Notifications
You must be signed in to change notification settings - Fork 40
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
The pi zero 2 w seems to not be able to connect through usb to a PlayStation 5 #184
Comments
I was able to do the complete installation and got it to work with a normal pi zero w but im trying with the pi zero 2 w and i dont know if they use the same cable for data transfer. For example the pi zero w uses the one that the ps4 controllers use micro usb b i think but i dont know if the pi zero 2w uses the same or not, that might be the problem. |
Pi Zero 2W doesn't have port which supports OTG mode. So it'w Pi Zero W only. Pi 4 has an OTG feature, but hasn't been checked yet by this community. |
So there is no way that i can use the pi zero 2 w for data transfer with the usb? Even though the pi zero 2w is supposed to be just a more powerful pi zero 2w. Please if you know how to do it I will appreciate it a lot. Thanks either way |
I got it working once after using some code from this page https://forums.raspberrypi.com/viewtopic.php?t=360603#p2163877 but I cant quite figure out which line is necessary for the pi to work and also how to make it like always work the OTG without writing some lines everytime. |
Don't have pi zero 2 in my collection. So, won't be able to check. |
RPi Zero 2W is compatible, but the recent RPI OS releases have changed the - echo "dtoverlay=dwc2" | sudo tee -a /boot/config.txt
+ echo "dtoverlay=dwc2" | sudo tee -a /boot/firmware/config.txt or - echo "dtoverlay=dwc2" | sudo tee -a /boot/config.txt
+ [[ -f /boot/firmware/config.txt ]] && ( echo "dtoverlay=dwc2" | sudo tee -a /boot/firmware/config.txt ) || ( echo "dtoverlay=dwc2" | sudo tee -a /boot/config.txt ) |
Is there a reason this might not work with a raspberry pi zero 2 W. I did the whole process right, but when I connect it to my PlayStation 5 it says “connect the Toypad” even though the pi is already connected with a micro usb with data transfer from the usb port of the pi. Maybe any solutions to this?
The text was updated successfully, but these errors were encountered: