My Phone Model Samsung SM-g532f when i install twrp recovery its showing this ERROR: Partition "RECOVERY" does not exist in the specified PIT. Please help me

[sarkaremon]

https://www.glassechidna.com.au/donate/~ $ heimdoo
Usage: heimdall

Action: close-pc-screen
Arguments: [--verbose] [--no-reboot] [--resume] [--stdout-errors]
[--usb-log-level <none/error/warning/debug>]
Description: Attempts to get rid off the "connect phone to PC" screen.
Note: --no-reboot causes the device to remain in download mode after the action
is completed. If you wish to perform another action whilst remaining in
download mode, then the following action must specify the --resume flag.

Action: detect
Arguments: [--verbose] [--stdout-errors]
[--usb-log-level <none/error/warning/debug>]
Description: Indicates whether or not a download mode device can be detected.

Action: download-pit
Arguments: --output [--verbose] [--no-reboot] [--stdout-errors]
[--usb-log-level <none/error/warning/debug>]
Description: Downloads the connected device's PIT file to the specified
output file.
Note: --no-reboot causes the device to remain in download mode after the action
is completed. If you wish to perform another action whilst remaining in
download mode, then the following action must specify the --resume flag.

Action: flash
Arguments:
[-- ...]
[-- ...]
[--pit ] [--verbose] [--no-reboot] [--resume] [--stdout-errors]
[--usb-log-level <none/error/warning/debug>]
or:
--repartition --pit [-- ...]
[-- ...] [--verbose] [--no-reboot]
[--resume] [--stdout-errors] [--usb-log-level <none/error/warning/debug>]
[--tflash] [--skip-size-check]
Description: Flashes one or more firmware files to your phone. Partition names
(or identifiers) can be obtained by executing the print-pit action.
T-Flash mode allows to flash the inserted SD-card instead of the internal MMC.
Use --skip-size-check to not verify that files fit in the specified partition.
Note: --no-reboot causes the device to remain in download mode after the action
is completed. If you wish to perform another action whilst remaining in
download mode, then the following action must specify the --resume flag.
WARNING: If you're repartitioning it's strongly recommended you specify
all files at your disposal.

Action: help
Description: Displays this dialogue.

Action: info
Description: Displays information about Heimdall.

Action: print-pit
Arguments: [--file ] [--verbose] [--no-reboot] [--stdout-errors]
[--usb-log-level <none/error/warning/debug>]
Description: Prints the contents of a PIT file in a human readable format. If
a filename is not provided then Heimdall retrieves the PIT file from the
connected device.
Note: --no-reboot causes the device to remain in download mode after the action
is completed. If you wish to perform another action whilst remaining in
download mode, then the following action must specify the --resume flag.

Action: version
Description: Displays the version number of this binary.

~ $ heimdall detect
Device detected

~ $ heimdall detect
ERROR: Failed to detect compatible download-mode device.

~ $ heimdall detect
Device detected

~ $ heimdall flash --RECOVERY /storage/emulated/0/Android/data/dev.rohitverma882.heimdoo/cache/cached_imgs/twrp-3.7.0_9-0-fortuna3g.img --no-reboot
Heimdall v2.0.2

Copyright (c) 2010-2017 Benjamin Dobell, Glass Echidna
https://www.glassechidna.com.au/

This software is provided free of charge. Copying and redistribution is
encouraged.

If you appreciate this software and you would like to support future
development please consider donating:
https://www.glassechidna.com.au/donate/

Initialising connection...
Detecting device...
Claiming interface...
Initialising protocol...
Protocol initialisation successful.

Beginning session...

Some devices may take up to 2 minutes to respond.
Please be patient!

Session begun.

Downloading device's PIT file...
PIT file download successful.

Ending session...
Releasing device interface...

ERROR: Partition "RECOVERY" does not exist in the specified PIT.