Eufy cameras no longer work with 1.9.7 (mse: unsupported scheme)

[z-master42]

After changing from 1.9.6 to 1.9.7 (Docker), the streams of my two Eufy cameras no longer work.
They are a T8410 and a T8210.
The stream comes via the eufy-security-ws addon in Home Assistant.

The message mse: unsupported scheme is displayed in the video stream.

When I switch back to 1.9.6, everything works again.

Do I have to make any adjustments in the config? This was previously generated automatically.

[misc2000]

I am right now working to get my Eufy doorbell T8210 cam that is working good in HA card view (over webrtc-camera) also forwarded to HomeKit.
during I did search here how to configure it in go2rtc for HomeKit I did notice the update to 1.9.7 and did update.
Now my eufy cam stops working also in HA itself. Not 100% sure if the root case is the update but it looks like.
Before the cam live view was working in HA card view over webrtc-camera always, and my main problem was a very slow streaming video in Apple Home app by forwarding the cam over the HomeKit integration of HA.
Now I understand that i should do it direct in go2rtc if I see it right?
But first I need to sort out if the update break my setup or not ???
And how can I go a version back to the old version of go2rtc in HA to verify?

[misc2000]

Update: still not working any more at all.
this is my config that was generated during installation with the eufy addons and webrtc-camera that worked good before the update.

streams:
  T8210P812419166F:
    - T8210P812419166F

And I see now this warning in the log:
23:30:05,783 trace [streams] dial cons=0 prod=0 error=streams: unsupported scheme: T8210P812419166F
23:30:05,782 trace [streams] check cons=0 media=video, sendonly, ANY
23:30:01,904 warn [rtsp] error=streams: streams: unsupported scheme: T8210P812419166F stream=T8210P812419166F

Can someone guide me how to downgrade to verify?

[AlexxIT]

Well. The T8210P812419166F scheme is definitely not supported. I'm not familiar with the eufy addon and don't know how it works. And I don't know why it worked before.

[z-master42]

I think the scheme is made up of model number and serial number.

The setup consists of the eufy-security-ws addon, the Eufy Security Integration, the WebRTC Camera Integration and Go2RTC (in some variant). The use of Go2RTC is actually included in the Eufy Security Integration documentation.

Stream provider is P2P and the stream URL is an RTSP.

[oig123]

I have the same problem.

[ahmed-elgamil]

Same problem here

[foddy-foo]

I see the same problem. My Eufy doorbell stream no longer works in Home Assistant when using 1.9.7
Rolling back to 1.9.6 makes it work again.

This is what I see in config

streams:
  T8210P6421501681:
    - T8210P6421501681

[AlexxIT]

And what you can see in config for old version?

[foddy-foo]

And what you can see in config for old version?

That is the config as seen once I rolled back to 1.9.6

[z-master42]

And what you can see in config for old version?

The config is the same for both versions.

[AlexxIT]

If someone is a developer - it might be helpful to know which commit broke. Just need to build a binary for each commit between 1.9.6 and 1.9.7. Should not be a difficult task, even if you don't know golang.

[z-master42]

You mean just try out nine different builds?

[AlexxIT]

Yes. Just git checkout, go run. Multiple times

[AlexxIT]

OK. Looks like we know the problem #1458
All incoming sources broken.

[misc2000]

Sounds great that you found the source of the problem.

Can someone please give me some how level instructions how to downgrade to 1.9.6 again until the problem is solved?

I am using a Pi4 with standard HAOS Image and did install all over the HA add-on store/hasc as explained in the eufy cam how's to's for HA.
I think go2rtc was installed from webrtc-camera when I installed it.

Could it be a try to uninstall webrtc-camera and reinstall it in the hope it will install again the older version from go2rtc?

[AlexxIT]

Fixed in latest master version

[AlexxIT]

WebRTC camera integration has old go2rtc version - 1.9.4

[foddy-foo]

Sounds great that you found the source of the problem.

Can someone please give me some how level instructions how to downgrade to 1.9.6 again until the problem is solved?

I am using a Pi4 with standard HAOS Image and did install all over the HA add-on store/hasc as explained in the eufy cam how's to's for HA. I think go2rtc was installed from webrtc-camera when I installed it.

Could it be a try to uninstall webrtc-camera and reinstall it in the hope it will install again the older version from go2rtc?

Personally I went to Settings, System then Backups within Home Assistant and looked through the recent backups listed. I saw one entry for go2rtc from the day before when the add-on got automatically updated. I selected that and restored (it only restores that one item not your whole HA). This took about 10 seconds to complete. I then restarted the whole Home Assistant and it fixed the problem. I've now turned off Auto-Update for that particular add-on. Hope this helps.

[z-master42]

Fixed in latest master version

Tried it out, it works.

Many thanks for the quick fix.

[misc2000]

Also for me its working again.

Now because I have some eufy users reading this a quick question:
I want to forward the video stream of the eufy doorbell with 2-way audio to HomeKit.
currently I have good and stable video with the direct HomeKit export from go2rtc. But a kind of slow-motion video from the HomeKit camera from the HA own HomeKit integration.
This are my config:

homekit.yaml:
- name: Haustürklingel
port: 56324
mode: accessory
filter:
include_entities:
- camera.haustur
entity_config:
camera.haustur:
linked_doorbell_sensor: binary_sensor.haustur_ringing
linked_motion_sensor: binary_sensor.haustur_motion_detected

go2rtc.yaml
streams:
T8210P812419166F:
- T8210P812419166F
homekit:
T8210P812419166F:
pin: 33322333
pairings:
...
How should the stream source: Tag look like in the HA HomeKit.yaml and do I need some more stream config in the go2rtc side to reach my goal?
Or can someone with a eufy doorbell cam share the relevant config parts?
Thanks

[saschawj]

For AlexxIT.
Seen the same issue for a bunch of cameras. Good that you potentially found the source of this, however I would like to add a portion of the log here, in case it helps:

END of File warning

12:31:53.503 WRN github.com/AlexxIT/go2rtc/internal/streams/producer.go:170 > error=EOF url=http://192.168.XX.XXX:8123/api/camera_proxy_stream/camera.front_door?token=9eaaXXXXeead096c349d5e38ba3984a1a23e2aecc9b3d58be1902824e03b2
12:31:53.539 WRN github.com/AlexxIT/go2rtc/internal/streams/producer.go:170 > error=EOF url=http://192.168.XX.XXX:8123/api/camera_proxy_stream/camera.ingarage?token=a3e0XXXX8e20e2fb5d77eb7c8fd5bd8a82e8d52d404aa66bcc66c7346c3c9cd9

New Stream error Warning with unsupported scheme

12:32:31.493 INF [streams] create new stream url=rtsp://127.0.0.1:8554/T8423TXXXXXXXXXX

As above unsupported scheme error

12:35:21.542 WRN [rtsp] error="streams: streams: unsupported scheme: T8170TXXXXXXXXXX" stream=T8170TXXXXXXXXXX
12:39:16.282 WRN [rtsp] error="streams: streams: unsupported scheme: T8423TXXXXXXXXXX" stream=T8423TXXXXXXXXXX

I have a whole bunch of Eufy cameras and as stated none are displaying any more.

Eufy Floodlight Cam S330 (Model: T8423)
Eufy Solocam S340: (Model: T8170)
Eufy Floodlight Cam E340: (Model: T8425)
Eufy Garage-Control Cam: (Model: T8452)

Should you need any tests done, please let me know.

[oig123]

Fixed in latest master version

thanks

[AlexxIT]

Unsupported scheme is correct error. Eufy integration creates an invalid config. This issue should be added to the eufy project.

[z-master42]

What should a valid configuration/schema look like? Use of entity ID?

[AlexxIT]

This is incoming stream. It should have empty source.

streams:
  T8210P812419166F: